HT1925 In what appears to be a random occurrence (its happened 3 times now) itunes will stop working. I am able to open the program, log in, but once I select a movie or show to watch iTunes "stops responding" "freezes" Help?
In what appears to be a random occurrence (it has happened at least 3 times) iTunes will "Freeze" I have to shut down the program from the task manager. I am able to open the program, log in, and select an item to watch, once this has been done nothing happens...
Occasionally, the movie will begin to play only without sound.
The most recent time this occurred I literally finished a show, went back to the main screen to select another show and it froze.
Oddly enough, I have noticed that when iTunes acts up so does my shockwave player also...
Any suggestions? I would appreciate any input, and remember I am a novice....
This implies that ODP.NET does NOT need to be installed on a client. However, I cannot find OraOPs9.dll on a machine with Client Release 9.2 installed. Should OraOps?.dll automatically come with a Client installation of 9.2 or higher?
ODP.NET needs to be installed on the client. OraOps9.dll is part of ODP.NET, not the Oracle Client.
Also, if an application is built with the 10g ODP.NET, can it be run from a machine with OraOps9.dll?
If an application is built with 10g ODP.NET, it can be run with 9.2 ODP.NET as long as you do not use any 10g APIs. The new features in 10g ODP.NET are included in the doc and the ODP.NET FAQ for your reference.
Similar Messages
-
iTunes keeps shutting down when I open it up. The message says iTunes has stopped working. A problem has caused the program to stop working correctly. Windows will close the program and notify you if a solutions is found.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried something like the above then try opening iTunes in safe mode (press and hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud Purchases. You may find that iTunes opens normally now.
tt2 -
Hai, i tried to open itunes on my windows 8 laptop but it comes out with 'iTunes has stop working' notification and need to close the program everytime i try to load it. Please help! thanks.
Hi ajay-9,
Thanks for visiting Apple Support Communities.
The steps in this article can help if iTunes is quitting unexpectedly on your PC:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Cheers,
Jeremy -
Blackberry Desktop Software has stopped working. A problem has caused the program to stop...
I have a Tour 9630 and just installed v6.0 and receiving an error window "Blackberry Desktop Software has stopped working. A problem as caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I have not received any message from Windows after 2 days. Has anyone experienced this problem? If so, I would appreciate any guidance. I have Windows 7, if that matters. Thank you. in advance.
Hi somewhatstock
How far did you get with them? Did they have any ideas what might be causing the problem? Trying to work on it myself, so trying to eliminate what others might have tried. Curious why it works on my Desktop however. Losing tethering really causes problems as I rely on tethering with my laptop quite a lot.
Any information most welcome,
regards,
John -
My computer broke, so I had to change the hardrive-hardisk(?). Now iTunes dosen't work anymore. It says that the program is either locked, is on a locked unit or I don't have the right to open the library? Help please?
Sometimes a restart can fix this issue, but sometimes you have to fix the iTunes Library.itl file.
Try quitting iTunes, renaming the itunes file "iTunes Library.itl" to "iTunes Library Old.itl"
then open itunes again
This should generate a new library file.
From this point you can try two different avenues.
1. Re-add everything to your library by going to the iTunes file menu, and selecting "add to library"
2. You can try deleting the iTunes Library.itl you created, changing the name of the old file back to iTunes Library.itl
I hope this helps. I did something like this a while back and it worked for me. -
I can't seem to get iTunes to shut down without crashing. After closing the program a window pops up that says "Saving iTunes Library..." and then immediately another window below it that says "iTunes has stopped working" and only gives me the option to close the program. I've uninstalled and reinstalled the program and that didn't work. What else can I try?
Exclude your antivirus software's real time scanner from the iTunes folder.
tt2 -
I need help please. Exactly what my title says. It makes me close the program whenever I join/try to get on Photoshop CC 2014 and says it has "stopped working."
Moving this discussion to the Photoshop General Discussion forum.
-
Why do I continually get the "iTunes is not working properly" notice??? I cannot get to the iTunes store. I am using Windows 8 and have tried downloading it and redownloading it numerous times..
Yeah... that's how it works. Signing into iTunes does not magically make a library appear.
If you have an iTunes library (media purchased from iTunes) then YOU need to put it on the computer.
Also, since the computer is no longer authorized for his account, any media associated with his account will not be playable. -
I have deleted the program and re installed numours times, also ran a full essential scan, spybot and malware byte scans with no results. Any ideas?
Nobody has had or has this problem? I have gone back and forth with itunes "help" people for 2 weeks with no "help" at all. I guess I am going to have to buy a non apple devise and shop @ amazon for my music.
-
I bought the macbook with other stuff installed, but was only given the original discs. I hadn't realised that the OS and pretty much everything else had been upgraded from what was on the discs, and now I can't work on any of my documents. I have also bought software based on the operating system installed when I bought it, and now some of it is no longer usable, either.
It's bad enough I have to borrow my roommate's computer to get internet for job hunting and important communications, since Airport just stopped working (not sure what's up with that, but I hardly care now, in light of everything else), but now I need it to even write out lesson plans for my volunteer teaching or do my own writing. If I had a job, I'd have gone to an Apple certified place a long time ago to try fixing the Airport. Since I couldn't afford it, I thought I'd try reinstalling everything. I don't know much about where everythign is, so I figured maybe that would reinstall Airport, too. .
The sucky thing is, I had planned to buy more recent versions of any of the extra programs that I use once I had the money. just not quite yet.
I didn't use the 'delete and install option,' yet the earlier versions seem to have taken over and overwritten things. For instance, now some programs say parts are missing, or are just trial versions.
Lesson learned: Leave things well enough alone until you can afford the experts. Obviously there are some things I can't fix for myself.Hi!! To add more to the issue, the other day, my airport card is nowhere to be found. It now says no airport card installed which is really crazy. I also noticed that my MBP freezes during start up and I had to zap the PRAM so it would open up. Anyone there who experienced the same thing? I'd really appreciate your suggestions. Thanks!
-
File history stopped working after a warning message in the event log
I have encountered this twice that File history stopped working, the event log says:
Unusual condition was encountered during finalization of a backup cycle for configuration C:\Users\xxxx\AppData\Local\Microsoft\Windows\FileHistory\Configuration\Config
If I re-run it, it consumes the backup disk space but still failed to backup.
I have to manually delete all backup, turn off File History and re-configure it again to make it work.
This happened twice already, so all my file history lost after re-config.
Anyone encounter the same situation?MICROSOFT is plagued by idiots!!!!
- Just turn it off
- then click "select drive"
- and when it asks you the retarded question... just click >>>>>"NO"<<<<<<< -_-
Seriously... this is the answer.... frigging retards at microsoft... to think it takes an army of programmers and billions of dollars to create such idiocy!
http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/cannot-change-drive-in-file-history-windows-8/6dbeca54-d05e-4f93-9262-45a56d6a82d1?page=2&msgId=f1792c5e-c5d0-4163-b449-c7165d72f88d&tab=question&status=AllReplies&status=AllReplies%2CAllReplies
I cant believe these morons put everyone through such hell and then don't even bother to follow up with the correct solution.
To top it of the moron moderator marks this as an answer??!!!
What a pathetic joke - I hope everyone reads this message before being punished by the miles of bullcrap in this thread -_-
Microsoft = ridiculous
Thanks! I guess the TL;DR version is "to change your file history drive you need to discard the current temp files."
Exactly :)
It's the bad wording in the messages.
the first message (which I can only vaguely remember so can't quote exactly) that gives you the impression you can continue
something but doesn't make clear that to so will need the "old drive" configured the way the "old drive" was.
Then the next message is just confusing:
“we can't copy files to this location. Your current File History drive is disconnected. Reconnect the drive and try again”
sounds like
“we can't copy files to this location. [because there's a problem with the new location]
Your current File History drive is disconnected. [the new location is disconnected]
Reconnect the drive and try again [reconnect your new location and try again]”
When it should be reworded to say something along the lines of (in more formal language):
"You asked us to continue...give us the drive you were previously using...or if it's no longer available, click here to start from scratch"
(I know that's all the opposite of tldr but I'm trying again to put into words what I think was happening). -
Whenever I go to my e-mail, it scrolls down by itself, then it freezes and stops working. It happens on my ipad and other computers as well. Also lately I have had trouble receiving e-mails from other senders.
I also cannot view e-mails for long without restarting the program and I purchase additional storage.
Can you help me solve these problems??Hi RACHEL CHISHOLM,
Please follow the steps mentioned in the KB article below:
Doesn't launch after 30 days | Installed as part of a CS6 suite
Follow the steps when you experience this issue. -
Error message Adobe InDesign has stopped working as soon as I open the application
I had a computer crash on Friday and I just reinstalled InDesign this weekend and it has worked fine. This afternoon I started to receive an error message that Adobe InDesign has stopped working and Windows will close the program and notify me if a solution is available. I've rebooted and closed every other program. I have also been downloading my lost files from Carbonite since yesterday and have paused the download. Do I need to uninstall the program and reinstall?
Use System Restore to go back before the crash.
-
tryed updating to new software then failed and lost everything now stuck on recovery and wont repair hope ive not lost everything what can i do
Maybe you could give some information. What error? What iP4? What computer system? What version iTunes? What does "lost everything" mean? All iPhone 4 are under warranty, take to Apple Store they will always help you.
-
I sent iTues to trash by mistake (trying to delete files from "yesterday"). I got the program back but have to "put back" songs one at a time. Is there a way to put back multiple songs using the "select all" command or anything else? Thanks for the help.
The prgram is in one location and the library (media + library files) are in another. Sending it all to the trash would take some pretty delibrate multiple actions and digging through multiple folders, so I don't know how this was managed unless there's something in Snow Leopard that's new. Occasionally I have moved a file to the trash in Finder that I didn't want to and I can use Finder's "undo" to undo the last move. With many files...?
Maybe you are looking for
-
Error:There was an error processing a page. There was a problem reading this document (129)
System: Windows 7 64-bit Adobe Acrobat Pro X Client received a pdf file and gets this message when try to open it. I test it on my PC which is using Acrobat standard (same system) and gets the same error. Did some research on Internet and this messag
-
How to insert additional files on mobile apps
If i already finished my application/game then i want to add new content such as themes, images, music, etc. is this method posible? or if there another way to add some additional content to my apps/games please tell me. my application/game using AIR
-
No Acctng doc for 351 against STO !!!!
Hi, Normally, when we do a 351 against a STO, accounting documents are generated. However, in some cases, I notice that accounting documents are not created, even though the goods are valuated & MAP exists. Could sombody explain. Secondly, is it nec
-
Can scripting elements be intermixed with JSTL?
For example can you have a statement like <% pageContext.setAttribute("value",row.get(key.toString())); %> within a <c:forEach> loop? One page where I needed it, it worked. On another page, however, I got the error "Scripting elements are disallowed
-
Logic Recorded level higher on playback?
Tonight i was using Logic to send a mix to my hardware for mastering and capturing back through the Apogee Ensemble with the soft limit engaged as the final peak limiting to bush up the level a bit and prevent overs. No overs were indicated in the tr