HT1926 problems with installing updates

Tried to install the latest update for itunes on 2/2/2014.
Received two error messages every time I tried to update.
=====================================
Error Message #1
Runtime Error!
Program: C/Program Files (x86)\iTunes\iTunes.exe
R6034
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
=====================================
Error Message #2
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 1114)
=====================================
Did all of the Windows updates.
Uninstalled iTunes and tried to reinstall. Same messages.
What can I do now?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Similar Messages

Troubleshoot problems with installing updates on Windows Server 2012 Standart Edition

When trying to install last update, receiving next errors:
Installation Failure: Windows failed to install the following update with error 0x80070020: Cumulative Security Update for Internet Explorer 10 for Windows Server 2012 (KB3003057).
Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2978127).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB2982998).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB2993958).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3002885).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3010788).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012 for x64-based Systems (KB2978121).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3006226).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3005607).
Installation Failure: Windows failed to install the following update with error 0x80070020: Update for Windows Server 2012 (KB2975331).
Installation Failure: Windows failed to install the following update with error 0x80070020: Update for Windows Server 2012 (KB3008627).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3011780).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3003743).
This problem reproduced on all my web-servers (Windows Server 2012 Std). How can I fix these problems

Hi,
Windows update error 0x80070020 can occur if a program is interfering with the automatic update process.
Restart your computer or restart your computer in safe mode with network, then try to install the updates. Detailed information you may reference the link below(this applies also to Windows Server 2012 ):
You receive error 0x80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install updates
http://support.microsoft.com/kb/883825/en-us
If the problem still exits, open Run, type %windir% and hit
Enter, find a text file named WindowsUpdate, uploaded the log file.
Best Regards,
Eve Wang

KB2509007 did not fix problem with Install Updates hanging at 0% during OSD task sequence

Hi everybody. We recently started building our Build & Capture Task Sequence for our Windows 7 gold image. However, I keep running into the problem where the Install Software Updates step keeps hanging at "downloading updates 1 of 164 (0%).
This is a known issue that is supposed to be addressed with hotfix KB2509007. I followed the instructions
here to install the hotfix on my site server. I then added the PATCH= argument to my "Setup windows and ConfigMgr" step in my TS. But still my TS was hanging in the same spot.
Then I found
this page, which says that there is another known issue with KB2509007, and the order in which it is installed along side other hotfixes (such as R3). So I followed those instructions, and confirmed that UpdatesHandler.dll is at version 4.00.6487.2188,
and BOOM, the updates installed and I captured my gold image. This was about a week ago.
Well, since then, we have had a patch Tuesday, and I am trying to run by Build & Capture TS again to integrate the latest updates into my gold image, but now my TS is hanging at 0% again! I have confirmed that UpdatesHandler.dll is at the correct version,
so I am unsure what the issue could be now.
Does anybody have any experience with this issue? Thanks in advance for any help!
UPDATE: I re-ran my TS, and now the updates are installing. I'm not sure why the behaviour is so inconsistent though...

Hi everybody. We recently started building our Build & Capture Task Sequence for our Windows 7 gold image. However, I keep running into the problem where the Install Software Updates step keeps hanging at "downloading updates 1 of 164 (0%).
This is a known issue that is supposed to be addressed with hotfix KB2509007. I followed the instructions
here to install the hotfix on my site server. I then added the PATCH= argument to my "Setup windows and ConfigMgr" step in my TS. But still my TS was hanging in the same spot.
Then I found
this page, which says that there is another known issue with KB2509007, and the order in which it is installed along side other hotfixes (such as R3). So I followed those instructions, and confirmed that UpdatesHandler.dll is at version 4.00.6487.2188,
and BOOM, the updates installed and I captured my gold image. This was about a week ago.
Well, since then, we have had a patch Tuesday, and I am trying to run by Build & Capture TS again to integrate the latest updates into my gold image, but now my TS is hanging at 0% again! I have confirmed that UpdatesHandler.dll is at the correct version,
so I am unsure what the issue could be now.
Does anybody have any experience with this issue? Thanks in advance for any help!
UPDATE: I re-ran my TS, and now the updates are installing. I'm not sure why the behaviour is so inconsistent though...

PROBLEM WITH INSTALLING UPDATED INSPIRATION BROWSER

I have uninstalled Adobe Photoshop.com Inspiration Browser and cannot reinstall. When I install, the Adobe AIR Installer keeps returning "A download error occurred". How can I continue and install the update for Inspiration Browser.\?

Adobe has stopped supporting IB in PSE11 and is moving towards cloud sharing via Adobe Revel. In view of this I wouldn’t worry too much about installing or updating.
All of the tutorials can now be found on Adobe TV.

Problem with installing CUCM on MCS-7816-I5

Hi to all.
I have a problem with installing CUCM 8.6.1 on new MCS-7816-I5 (IBM) hardware. The problem is that installation loops in restart after upgrading MCS firmware. Actualy, installation does not sucessfully upgrade firmware, so every time it detects old firmware and trying to upgrade it.
I also tried update MCS firmware with downloaded Firmware Update Utility 3.6.5 CD from Cisco downloads, but it also fails.
Does anyone have idea what's going on? Is this a Cisco failure or IBM server failure?
Here is some details from log file generated with this Firmware Update Utility 3.6.5:
==============
Initial Selection
Machine Type: 4251 OS: SLES 10 Arch: 64 bit
IsPartition: 0
Update:   IBM System x uEFI update for x3200 M3 /3250 M3
Severity: Critical
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_uefi_gye142a_linux_32-64 Requisite:None
Version: 1.08 (GYE142A)
Install: 1.06 (GYE135A)
Select:    Yes
Update:   IBM Dynamic System Analysis
Severity: Recommended
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_dsa_3.20_dsyt75x_linux_32_64
Requisite:None
Version: 3.20 (DSYT75X)
Install: 3.01 (DSYT60K)
Select:    Yes
Update:   IBM Online SAS/SATA Hard Disk Drive Update Program
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_hdd_sas-1.08.01_linux_32-64
Requisite:None
Name:     WD2502ABYS-23B7A0 (/dev/sg0)
Version: 02.03B07
Install: 02.0
Select:    Yes
Update:   Integrated Management Module Update
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_imm_yuoo84c_linux_32-64 Requisite:None
Version: 1.22 (YUOO84C)
Install: 1.10 (YUOO57H)
Select:    Yes
IBM Command Line IMM Flash Update Utility v1.05.03 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
LAN-over-USB device not configured.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 3
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
(C) Copyright IBM Corp.2010. All Rights Reserved.
FdrvWL -- Flash Drive(s)                                     3.10.08.19
   1 Ada:0 SID:0   PN:44E9172:42C0463 SN:1J242783 FW:02.03B07              T:13 FW:Ok
AdaNbr(Type)      DevFnd Flashed(SAS SATA) NbrFailed
0(onBoard)           1       0   0    0          0
                       1       0   0    0          0 Error(s)
Update completed successfully. <-- THIS SUCCESS, BUT EVERY TIME IT UPGRADEING AGAIN FROM OLD VERSION, LIKE NEVER REALY UPGRADED TO NEWER VERSION
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
===========================
Thanks,
Sinisa.

Hi Sinisa,
It almost sounds like this bug;
CSCtn81201
Incorrect "Hardware Configuration Error" due to hardware setup errors
Symptom:
Refresh upgrade stops with IMM device detection, and then server being reported as unsupported
Conditions:
in-band USB interface was disabled, which is configurable via IBM system X or IMM (browser) interfaces.
Workaround:
change the in-band usb interface settings to enabled.
Related Bug
Status
Fixed
Severity
4 - minor
Last Modified
Aug 17,2011
Product
Cisco Unified Communications Manager (CallManager)
Platform
Dependent
Technology
nav
1st Found-in
8.6(0.99081.3)
Fixed-in
8.6(1.96000.1), 9.0(0.95070.38), 9.0(0.95070.39), 8.6(1.99989.1), 8.6(1.95050.1), 9.0(0.96000.1), 8.6(1.97011.2), 8.6(1.95190.40), 8.6(1.97011.1), 8.6(0.95180.9), 9.0(0.95010.1), 8.6(1.95020.1), 8.6(1.95040.1), 8.6(0.98000.50), 8.6(0.98000.17), 8.6(0.99981.2), 8.6(1.10000.1), 8.6(1.99986.1), 8.6(1.95020.58), 8.6(1.96000.51), 8.6(1.10000.43)
Cheers!
Rob

Problems with FlashPlayer Update.

Problems with FlashPlayer Update.
after download, install begins, but when the progress bar ends a typical Windows error message displays showing :
(literal translate from spanish):
" is not found the enter point of procedure SetDIIDirectoryW into the dinamic Links Library KERNELL32.dll "
ihave: windows32, XP + FlashPlayer Ver: 11.1.102.55 + MozilaFirefox10.0
flash works ok, but i can't complete a new update since Version: 11.1.102.55
please help me, Thanks

Microsoft Windows XP Professional Version 5.1.2600 Compilacion 2600
(looks like old windows98 / 2000 style but it's XP (i choose the old look in display preferences)
i think it's Service Pack 1 beacause there were problems with SP2 updates with some programs, so this version works Ok with all my software... until now. i Know there's a SP3 and it is an obsolate OS but i like it and works well in this PC.
Do you think that it's the problem? i must install SP3?

Problems with gunnerz update

"Waiting for ICloud" after my Gunnerz update. Any solutions from anyone. Supposedly there's an update coming but I won't hold my breath?

Microsoft Windows XP Professional Version 5.1.2600 Compilacion 2600
(looks like old windows98 / 2000 style but it's XP (i choose the old look in display preferences)
i think it's Service Pack 1 beacause there were problems with SP2 updates with some programs, so this version works Ok with all my software... until now. i Know there's a SP3 and it is an obsolate OS but i like it and works well in this PC.
Do you think that it's the problem? i must install SP3?

Problems with installing Xcode through App Store

Hey guys,
So trying to install Xcode on my Late 12 Macbook Pro with the ML update for a project with work.
Everytime I try to install through the app store, I get the Grey Screen of Death. Anyone else having this problem or what could it be? I've had no other problems with installing programs through the App Store.
I am currently downloading through the developer portal, so hopefully that works.
Hope someone can guide some light on this.
Thanks guys!

Hello,
For you problem with the Mac App Store you can contact the support here :
http://www.apple.com/support/mac/app-store/
(choose Account and Billing; you can change the country at the bottom of the page if you prefer dutch and go back to the support page).
For your problem with Mail and iCloud you can read this page :
http://support.apple.com/kb/TS4002?viewlocale=nl_NL (Troubleshooting iCloud Mail).
Hope this will help.

Problems with installing CS5 extended

Hi, I'm in the process of setting up a new computer and had no problems with installing Lightroom but installing photoshop CS5 is proving to be a real pain. At first it refused to install itself and after many hours of trying it finally did but then I found out I needed to update camera raw so I downloaded that but that one now is refusing to install itself. At first it told me the Applications manager needed to be updated so I did that and still it refuses to install itself. I have tried to get help from Adobe but not a single person is responding to my requests for help so I am now trying the forums so does anyone know what is going on with it?
Thanks!

Do a search on adobe's site for the specs of cs5 and make sure your system will support it. Also see if your OS is listed as being supported. It is possible that cs5 is too old for your system.
For now all we can do is guess. Maybe someone else will have an idea.

Problems with installing Win 2000 on MS6380

Hello,
I have a problem with installing Win 2000 SP 2 on a PC assembled with a MS 6380 (Kt 266 pro) mainboard.
The setup starts but the system blocks just after the boot, when showing the message "Detecting Hardware configuration" .
The configuration is the following:
Athlon TB 800
MS 6380
128 MB DDR
Matrox G200
20 Gb Quantum Fireball CX HDD
Intel Ethernet card 100 pro + S
I tried to update the Bios to the latest version (1.90) and set the most conservative settings on the RAM timings. I have disabled ACPI, too.
Could someone please help me with solving this problem?
Thanks

You have format the BootCamp partition during the Windows installation, since OSX can only do a preformat using FAT32 (MS-DOS) and Windows 7 needs NTFS as file system.
See page 7 of the BootCamp Installation Guidehttp://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
Stefan

Equium P200-1ED - have problem with installing VGA driver

Hello
I have problem with installing vga video driver, each time in installion it stops on
Version: 6,14.10,4833 and there is error poping up.........
Please help!

Hello
What error message is it exactly?
Make sure that the chipset driver and SP2 is installed at least.
I had a similar issue that I cant install the display driver. The error message was something like the hardware is not supported
But it was very easy to solve this problem. I installed the driver via device manager. I have selected the graphic card and choose update driver. Then I did choose the advanced installation to choose the directory by myself.
Anyway, after restart the driver was installed and it worked. :)
Greets

HT4993 problem with software update

I need help how to reslove problems with software update on my iphone 4s.

Reset your device and try it again: hold down the home button along with the sleep/wake button until you see the apple, then let go.(No data loss)
Also make sure you have enough free space on the device for the update file - usually requires 2 to 3 times the actual size of the file to be able unpack & install.

Recent problems with Windows Update with Thinkpad 8

Since last week I've started having problems with Windows Update on ny Thinkpad 8. It seems to be related with some recent update. At first I received different error codes. As I don't have many programs on my tablet, I refreshed it and set up Windows and Office again. I ran WU, and after the first update (with 100+ updates) WU was working ok. However, after a second set of updates (probably the most recent) I've started receiving error messages again. Most recently I am receiving code 80070002, and the error seems to affect only the installation of Windows Defender definitions through WU -- other WU updates install correctly, and most of the time I can install Windows Defender updates through Windows Defender. I have already tried the Windows Update Diagnostic tool, but the problem persists.

thanks farby

Problems with installing new programs

Dear all,
since the update to OS X Yosemite, I have some problems with installing new programs.
I tried to install the Fitbit App to connect my Fitbit to my Mac but the program can't be started after installation. I have the same problem with Blackberry Blend, too. I am able to install it but it doesn't start running.
Does anybody have an idea what's the problem?
Thank You,
Lisa.

Did you receive any errors during the installation itself or does this happen when you try to open Photoshop?

I am having problems with installing Itunes 10.5 .With the windows installer

I am having problems with installing Itunes 10.5.It's the first time i dowload it,but every time het gives me an error message that a programm that was needed for installing didn't run.
What can i do???

When I attempt the download for Itunes 10.6, I get an immediate response of ""Files shared by these updates" has an invalid signature. The download has been removed."
That's suggesting that the AppleApplicationSupport.msi is getting damaged during the download via Apple Software Update for Windows.
Are you able to get the 10.6 update to go through if you use an iTunesSetup.exe (or iTunes64Setup.exe) installer file from the Apple Website?
http://www.apple.com/itunes/download/

HT1926 problems with installing updates

Similar Messages

Maybe you are looking for