HT1937 Why is It when I sighn In to my iTunes account and try to update it asked me to log in to someone else's iTunes account.

When I log into my iTunes account enter MY email & password then go to update my apps it asked to to enter a whole different iTunes account email & password of a current friend instead of my own. We put in her info then says to enter payment information but I don't want to enter my card information on her account. Please help.

This means the app or apps you want to update were downloaded with your friend's iTunes account or Apple ID.
All apps, all paid and free apps included DRM protection which is tied to the iTunes account or Apple ID that was used to download the apps.

Similar Messages

HT1320 Help! My ipod classic is frozen. Even when I attach it to a power source and try to reset it (as per the instructions above), the apple logo never appears. The only thing that happens is that the screen turns alternately light and dark. Thanks!

Help! My ipod classic is frozen. Even when I attach it to a power source and try to reset it (as per the instructions above), the apple logo never appears. The only thing that happens is that the screen turns alternately light and dark. Thanks!

If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
Spank your iPod
http://www.youtube.com/watch?v=3ljPhrFUaOY
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
My iPod ism’t resetting and isn’t being read by my computer
http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

When I try to buy or update an app on my ipad, a window comes up asking me for a password using SOMEONE ELSE'S apple ID which prevents me from buying the app. How can I get my ipad toprompt for a password using my own apple ID, like it does w/ itunes

When I try to buy or update apps, myipad asks me for a password using SOMEONE ELSE'S apple ID, which prevents me from buying/updating apps. But when I am buying songs on itunes, the ipad asks me for my password using MY OWN apple ID and everything works fine. HOW DO I GET MY IPAD TO REQUEST MY PASSWORD USING MY OWN apple ID WHEN I AM BUYING OR UPDATING APPS?

The apps you are trying to update were purchased with (and therfore permanently linked to) someone elses Apple ID. If you do not know the password then you need to delete the app and redownload/purchase it with your Apple ID.

I saved docs from a iMac to a flashdrive but when I plug the flashdrive into an iBookG4 and try to open the docs on the flashdrive, I get this message: Doc 2 cannot be opened. The required index.xml file is missing.

I saved docs from a iMac to a flashdrive but when I plug the flashdrive into an iBookG4 and try to open the docs on the flashdrive, I get this message: Doc 2 cannot be opened. The required index.xml file is missing. Does this mean that I can't use the info on the flashdrive with the iBookG4 or can I do something to get the required index.xml file?
Thanks
jt

It appears if you write the document with newer version Pages and try to open it older version Pages.

I have Photoshop CS6 Extended Students and Teachers Edition. When I go into the Filter/Oil paint and try to use Oil paint a notice comes up "This feature requires graphics processor acceleration. Please check Performance Preferences and verify that "Use

I have Photoshop CS6 Extended Students and Teachers Edition. when I go into the Filter/Oil paint and try to use Oil Paint a notice comes up "This feature requires graphics processor acceleration. Please Check Performance Preferences and verify that "Use Graphics Processor" is enabled. When I go into Performance Preferences I get a notice "No GPU available with Photoshop Standard. Is there any way I can add this feature to my Photoshop either by purchasing an addition or downloading something?

Does you display adapter have a supported GPU with at least 512MB of Vram? And do you have the latest device drivers install with Open GL support. Use CS6 menu Help>System Info... use its copy button and paste the information in here.

Hi - i have an ipod and when i connect to my pc and try to update the software, its says that cannot update as im not connected to the internet even though i am. what can i do?

hi - i have an ipod and when i connect to my pc and try to update the software, its says that cannot update as im not connected to the internet even though i am. what can i do?

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

I need help please. I have 6 apps updates shown on on the upper right corner of the app store icon. When i tried to open the apps store and go to updates, the apps that need to be updated were not appearing therefore i have no idea what those apps

I need help please. I have 6 apps updates shown on on the upper right corner of the app store icon. When i tried to open the apps store and go to updates, the apps that need to be updated were not appearing therefore i have no idea what those apps are so that i can update them. Please give some solutions please

isthisonetaken wrote:
I'm having this problem. It started yesterday. I have 2 updates, but when I open the App Store, they won't appear.
Do you have apps purchased with a differnt AppleID?
For example, mine shows 12 updates but only 2 show up as being available.
The others are on my daughters account.
I log out of my iTunes account and log in with hers and those updates show up.

When i signed in it recognized my name and password but then it asks formy password again but the email address i cant edit and it says like randompeoples from my buddy list it doesnt say mine so i cant enter my password

when i signed in it recognized my name and password
but then it asks formy password again but the email address i cant edit and it says like randompeoples from my buddy list i must of shared music or something with its so weird and it doesnt say mine so i cant put my password

Go to Settings>icloud, scroll to bottom of screen and tap Delete Account. Then log in using a different ID.

Glitch since installing OS X Yosemite. When I download a docx MS Word doc and try to open it the word icon flashes up and does not open.

Glitch since installing OS X Yosemite. When I download a docx MS Word doc and try to open it the word icon flashes up and does not open.

Step one is to log into a newly created admin user account and see if the problem persists.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Hello everyone, So When I use the eraser on a photo and try to save it as jpeg is makes is save it as a copy but the parts that I erased are replaced with a white background and thats not what I want

Hello everyone, So When I use the eraser on a photo and try to save it as jpeg is makes is save it as a copy but the parts that I erased are replaced with a white background and thats not what I want

That may not be what you want, but Jpeg images are flattened, without transparency. Every pixel has a color value, with the default background usually being white. If you want to crate an image that leaves the erased area transparent, you will need to use an image format such as .gif or .pnc.

When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.

When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.

It's a bit hit and miss, Walter. Sometimes the box to enter text shows up straight away in the inspector under "text". Other times, although you click "text" in the inspector, there's nowhere to actually write anything.... then what you have to do is move the trackbar over the Title Box until you see the text boxes in the main Viewer. In the Viewer, double click a text box.... you can enter text there, but it's a bit flaky, but when you've clicked in it, you'll find that under "Text" in the inspector, the box for inputting text has magically appeared!
I'm not sure if anyone else has this trouble, but it is a bit of a pain!

HT6012 While trying to update projects and events from a previous version of iMovie to iMovie '11, someone forced iMovie to quit. Now when I start iMovie '11 and try to update, a message says no projects or events can be found? Any suggestions?

While trying to update projects and events from a previous version of iMovie to iMovie '11, someone forced iMovie to quit. Now when I start iMovie '11 and try to update, a message says no projects or events can be found? I know there are previous projects and events, and they definitely have not been updated because they do not show up in my iMovie'11 library, events, or projects. Any suggestions?

I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul

I have a custom template. When I edit it and try to save it asks me to name it and then I end up with an additional custom template. How do I edit the template and save the changes without creating another template?

I have a custom template. When I edit it and try to save it asks me to name it and then I end up with an additional custom template. How do I edit the template and save the changes without creating another template?

Hi Atrec,
If you don't need your old custom template, save your changes with the same template name. It will tell you that this template exists and will ask you Replace? Say yes (if you do want to replace the old with the new!)
To delete unwanted templates, go to Finder > Menu > Go and press the option key. Your Library will show in the Go Menu. Navigate to Library > Application Support > iWork > Numbers > Templates > My Templates.
Delete any unwanted template by dragging it to the Trash or click on it then command-delete.
Having gone to all that trouble to find My Templates folder, right click (or control click) on it and Make Alias. Drag the Alias to any convenient place for a quick way to get back to that folder.
Regards,
Ian.

HT5622 My apple id is registered in my settings but when I want to update my App Store it comes up as someone else's Id, how do I fix this?

My apple id is registered in my settings but when I want to update my App Store it comes up as someone else's Id, how do I fix this?

Go to settings/itunes and app store. Sign out then back in with your apple ID then password!

I have iPhone 3G with ios 4 but now i update new version and my phone is not working.it is not activating..when i tried it says please insert sim and try again..any one plez hepl.

i have iPhone 3G with ios 4 but now i update new version and my phone is not working.it is not activating..when i tried it says please insert sim and try again..any one plez help

Try this article if you haven't already
This is the only possibility that came to my mind when reading about your issue:
"If an iPhone, iPad, or iPod touch is not recognized in iTunes on Windows, the Apple Mobile Device Service (AMDS) may need to be restarted"

HT1937 Why is It when I sighn In to my iTunes account and try to update it asked me to log in to someone else's iTunes account.

Similar Messages

Maybe you are looking for