HT201263 I'm so disgusted! I just realised I will lose the photos of my daughter's birth... And why??? because I pushed a stupid button for a software update???? Apple,..I need a solution. I haven't paid this device to have this kind of issues.
I'm so disgusted! I just realised I will lose the photos of my daughter's birth... And why??? because I pushed a stupid button for a software update???? Apple,..I need a solution. I haven't paid this device to have this kind of issues.
My Iphone is still in the recovery mode and I don't know if there is a way to restart it without losing my photos? I made the last backup months ago...:(((
I'm a little confused. At what point did the phone go into Recovery mode? Did you just leave it alone for awhile after you clicked the update button? I just updated my phone, and after the initial download, the phone restarted itsef a couple of times, installing the update in the process. When you do an update, you need to leave your device alone until it is completely done.
As far as your photos go, sorry, but if you have not backed them up, and you are truely in Recovery mode, then you won't have any way to restore them.
Are they in your Photo Stream in iCloud by any chance?
If not, and you have to do a Recovery, then you won't be able to restore them from a backup.
But if they were so important, why wouldn't you have backed them up?
You cannot blame Apple for this. What if your phone had been stolen, or you had lost it? You would be in the same boat - you would lose your photos.
So, two things:
Are you sure your phone isn't just completing the update? Have you let it do it's thing for 20 or 30 minutes? If not, leave it alone and see if it is in the same condition in 30 minutes.
If you have, then determine if you have those photos in your Photo Stream. If you do, then they should still be there when you restore your device and sign back onto iCloud.
Cheers,
GB
Similar Messages
-
Aperture 3 shuts down every time I try to use it after only using it for one minute. Aperture closes then a pop up screen asks if I want to reopen Aperture. If somrone at Aperture didn't keep pushing a stop button for it to close,Apple wouldn't need to ask the stupid question"Do you want to reopen Aperture?" to begin with. Anyone out there having the same annoying problem?? I like Aperture or used to anyway,but if this nonsense continues, I will be forced to buy some other editor besides "No hanging fruit - Adobe photoshop CS5" or "I don't like you so I'm shutting down - Aperture".
Hello,
sorry to hear about your troubles, but we will need to have more technical information about your problem to be able to help you:
There may be several reasons that can cause Aperture to crash on start up:
You may have imported an image (or video) in an encoding that Aperture does not support, or that is larger than 2 GB, or that is corrupted and Aperture cannot process it
Your Aperture Library or Preferences may have been corrupted
Or you are having a system wide problem with your machine.
Or you may simple be running out of disk space.
It would help, if you could post the crash log from your last crash. Also, more details on your Aperture Library: Is it managed or references? how large is it? Is it on your system drive or on an external drive?
What have you done, shortly before the trouble started? Have you imported new images or videos? Did you install any plug-ins or any new software, lile Final Cut?
Try, if you can get Aperture to launch, if you defer the generation of Previews: Hold down the SHIFT-key immediately after you start Aperture to prevent preview generation for that session. If a damaged image in your library is preventing normal opening, this may allow you to start Aperture. If this succeeds, try to identify the broken image or video among the images you recently imported and remove it from the library.
Regards
Léonie
Don't you think your user name is a little bit tactless in an Apple provided forum? -
Just realised iCloud has no MobileMe photo gallery equivalent. Mmmmmm ...?¿
Just realised iCloud has no MobileMe photo gallery equivalent. Mmmmmm ...?¿
If there is a question in there somewhere this page may help to answer it:
http://rfwilmut.net/migrate4 -
After doing a software update for iPhoto, some of the photos in my library appear distorted and stretched. I have tried repairing the library, rebuliding and repairing the thumbnails but they are still distorted. Has anyone else experienced this and found a solution?
What upgrade did you apply? As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
OT -
I am a newby at this beast. While most of it is self ex.the FaceTime problem of not signing in and asking to check network connection is driving me crazy. there seem to be as many solutions as I have years. There must be an easy way to check where the problem is??????
That is a legitimate Mozilla newsletter. As it says in the email:
You're receiving this email because you subscribed to receive email newsletters and information from Mozilla. If you do not wish to receive these newsletters, please click the Unsubscribe link below.
Unsubscribe https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/
Modify your preferences https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/ " -
hi..i just bought an iphone 5 yesterday 32GB..and now when i am trying to update the software..it says the following: unable to check for update/an error occurred while cheking for a software update...please help me..is it a problem in my new iphone??or it's just an temporary error in the apple software center???
Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card. -
i cant imagine that we are facing this kind of issues with Apple, it is the 2nd time i am writing to you with no reply. i bought my iPhone 6 from Dubai on March first then it stopped working on March 12th, i gave it to you authorized re-seller here in Egypt and they replaced it in 24 days ... after another 6 days the new phone ALSO STOPPED working, i went back to them they said sorry we will replace it again.
i really cant imagine that i paid more than US$850 2 months ago and until now i didn't use the mobile for more that 2 weeks.
i really appreciate your help and responseThis is a user to user forum - you are not talking to Apple here, only to other users like yourself. You will need to take this up with Apple directly: http://www.apple.com/eg/support/contact/
-
i just plugged my iphone in to download some pix to my computer and my phone is now showing a plug with the itunes icon and its telling me I have to restore my phone and will lose all my data. *** is going on and how can I go back?
"I have logged in to my itunes account on a different computer and none of my purchased music is showing up."
Correct. it does not magially appear in other places. It will only be where you put it.
"I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where I sync everything. "
Correct as well. Iphone will sync with one computer at a time. Syncing to another will erase the current content.
You need to copy everything ( itunes library/contacts/pics/calendars/files/docs) from the old computer, or your backup copy of the old one, to the new one. -
Software update says I need to download MacOS 10.6.7. Each time I try, I have tried 6 times, the software downloads, it has me restart the system, it then writes the files to disk and then I get an error measage that "there was error in installing the softare. Anybody have this problem and how do you fix it? I am running 10.6.6
Try this before trying to install the update.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If you still have a problem then I suggest you download the 10.6.7 Combo Updater and install it. -
I Installed Lion and now my USB modem will not work to send a PDF fax? Do I need a new USB modem to send faxes or is there a software update that I need? Also can I change the picture of the login screen? That grey mat looks ugly!
As posted by Ham on July 29 @ 9pm on this thread <https://discussions.apple.com/message/15786976#15786976>.
Official statement from Apple:
http://support.apple.com/kb/ht3152 -
I would like to connect a printer that requires OS 10.6 or newer. My MacBook is currently using OS 10.5.8. In searching for a software update, I am told no updates are needed (and am given no option for updating my OS). How can I upgrade my OS to 10.6 or newer?
You have to understand the difference between an Update and an Upgrade.
An Update is a free change to add to the base code or as a bug fix within an existing Operating System. Such as the .8 added to OSX 10.5 or the .11 added to OSX 10.4..
An Upgrade is a complete new Operating System that must be purchased. Such as 10.5 Leopard to 10.6 Snow Leopard.
10.5 Leopard was written for Power PC Macs with code added to force it to run on Intel processors.
10.6 Snow Leopard has completely rewritten code and only runs on Intel Macs.
10.7 Lion ($19.99) used some 32 bit which allows it to run on Late 2006 through Early 2008 MacBooks and a lot of 64 bit code.
10.8 Mountain Lion ($19.99) is pure 64 bit, which excludes more systems than Lion did. It can only run on the Late 2008 through Mid 2010 MacBooks. It's not something you can add memory to, for example, as it involves the base architecture.
10.9 Mavericks is pure 64 bit and is a free download from the App store.
The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard After you’ve installed that then download the 10.6.8 combo updater to finish it off. http://support.apple.com/kb/DL1399 You will need to be running 10.6.8 to access the App Store to order Lion, Mountain Lion or Mavericks which are downloads only.
System Requirements for 10.6:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply. -
After my last software update I can no longer access my mail. message displayed says "you have mail version 4.5 this cannot be used on Mac OS X Version 10.6.8 . How do I fix this???
See possible fixes here.
https://discussions.apple.com/message/19760703#19760703
https://discussions.apple.com/thread/4311280?tstart=0
https://discussions.apple.com/message/19710911#19710911
Some have reported success simply by reinstalling the update.
http://support.apple.com/kb/DL1586
Or download and apply, or reapply, the 10.6.8 Combo update first, then apply the Security Update again.
http://support.apple.com/kb/DL1399
I'd suggest starting with the simplest of these fixes, so look them over first. -
What do I do. I just turned my iPod touch 5 on for the first time in about two months and it telling me that it is disabled for 23,079,134 minutes please help anything would be good I also have not backed it up for a while now
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If you previously synced to the computer then you may be able to recovery use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer. -
i only have one computer assigned to our ID and am trying to authorize my other computer for home share but it keeps telling me to deauthorize other computers. we do not have any other computers hooked up to the account. how do i get past this?
Understanding Home Sharing
Troubleshooting Home Sharing -
im trying to restore my iphone and itunes doesnt allow it to restore without updating. problem is that i have the latest update on my iphone so why is it forcing me to wait for a 7hr update download when i already have the update and only need to restore?
Sadly, the iPhone 3G can not be upgraded beyond iOS 4.2.1.
Maybe you are looking for
-
Why does my iPad disconnect from wi-fi?
why does my iPad intermitently disconnect from my home wireless network?
-
PLS_INTEGER v/s Other Numbers ?
Hi Gurus. Following is a excert from Doc. "When you need to declare an integer variable, use the datatype PLS_INTEGER, which is the most efficient numeric type. That is because PLS_INTEGER values require less storage than INTEGER or NUMBER values, wh
-
SCCM 2012 Client Installed - Console Shows No Client Installed
Can anyone help me to figure out why in world clients are not reporting back to console. In the pc I can see configurations manager installed but then again in console it say no client. I have bounderies ip are config, and I extended the AD schema. I
-
Hello !! I am detecting rising and falling edge of a square wave in a loop.......but i am not able to do it.....kindly help........sample code is... Case 1 : do Val = readhardware(channel number); if (val >2) break; }while(1)
-
When I am trying to run th demo scripts of advanced queing it gives me message 'feature not enabled' I have installed advanced queing feature and also set the init.ora file parameter aq_tm_processes = 1 Thank you for the help