HT201406 I cannot get my touchscreen to work not even able to slide to turn on. tried resetting, waited for the apple and then the usb itunes disc/music note appeared then nothing.. is this ipod junk?

I cannot get my ipod touch touchscreen to wrok not even able to slide to turn on. Ive tried resetting, waited for the applie.. long wait then the USB plug appeared wit Itunes disc/music note then it just stayed there.. is this ipod junk?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

  • When attempting to open email I repeatedly get a message that my username or password is incorrect. I have tried everything to reconcile including deleting and reopening the account however nothing has worked.

    When attempting to open email I repeatedly get a message that my username or password is incorrect. I have tried everything to reconcile including deleting and reopening the account however nothing has worked. Any suggestions?

    If it is a POP account, there could be an issue with the outgoing server setting. It will not hurt to check this and make sure. Make sure that your username and password are in there.
    Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

  • Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error ,

    Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error , i try to restore with itunes restore mode and throws me error!, could anyone help? I'm going crazy!. Thank you!
    This is the mistake That I get up the logo and then reboots iphone and Continues to Appear;
    (NAND) _findflashmediaandkeepout: 601 physical nand block offset 1
    (NAND) start: 356 this 0x96959400 PROVIDER = 0x96b1de80 falshmedia = 0x96b1de80
    (NAND) WMR_Start: 149 apple PNN  NAND Driver, Read / Write
    (NAND) WMR_Start: 174 FIL_INT (OK)
    (NAND) WMR_open :371 vfl_open (ok)
    (NAND) s_cxt_boot:88 sftl: error, unclean shutdown; adopted 7775 spans
    (NAND) WMR_open:420 FTL_open      (ok)
    (NAND)_publishServices:642 FTL capabilities: 0x00000001
    (NAND)_ppnvflGetStruct:3469 checking borrowed blocks-count:23 max_count:23
    (NAND)_fetchBorrowedList:881 number of borrowed blocks 16

    Hi Guys!
    I'm German, so my english writing might not be perfect
    I had the same Issue on a 5 i bought. Exact same screen and writing. Battery was totally drawn, first thing I had to replace. The screen had been replaced and since then it wouldn't work anymore according to the previous owner.
    It took me a couple hours, after recieving a few errors like 4013 it just never completed the restore, got really hot as well. The Flexwire of the Dock Connector seemed damaged, replaced the dock, but that didn't help.
    I almost gave up, thought the Logic Board was bad.
    BUT! Then i deceided to check if it has anything to do with the Screen assembly, and it did.
    Long story short, on mine the front facing camera, and sensor assy were bad.
    Anyhow, the phone works ''perfect'' when i leave them unplugged. So I just ordered a new one and we will see if thats the problem or if the damage is in the Logic Board.
    If so, i can live without the sensor and front cam.
    Just wanted to share, good luck everyone.

  • Cannot get Air base to work- was even turned away by Apple tech support.

    I just recently purchased a used Airport Base Station-
    I am trying to set up a wireless network at home with my new iMac G5 and a PC running XP --
    My problems are: I can't get the PC to hook up and the admin Utility on the iMac wont see it- and keeps asking for a password - I have tried to reset the base station and get the admin Utility to allow me to make the changes but I keep getting vague error messages. So I can't change anything- Even during the whopping 5 minutes that are given to achieve anything when the station goes into reset mode--
    When in Admin It wont recognize the ability to change anything--
    Am I missing something? Should I attempt to upgrade the firmware? It says that it is in version 3. something It gets cut off no matter what...
    thanks for your help!!

    Had to purchase new wireless modem--
    Bought a belkin for $30!! Can't beat that!!

  • Cannot Get My Powerbook To Work With New Hard Drive

    My powerbook (1.67 ghz, 2 gb ram, 80 GB original hdd) was running out of room on the hard drive, so I purchased a WD 250 GB hard drive IDE to replace it. I haven't really done much on my powerbook prior to this, so I wasn't sure exactly if any problems had occured before I did this. But I replaced the drive and tried to boot from a CD and could not do it. I was using a Tiger Retail disc because I can't find my restore discs. I never had any problem reading my discs prior to this, as I have a DVD/RW drive and it has never failed on me. I tried booting from other discs as well and the same problem occured. So after several failed attempts, I connected my powerbook to my ibook through target mode and was able to install the OS on the partition of my powerbook. After completing the install, I was able to access the powerbook partition through the ibook and everything seemed fine. I unplugged the firewire cable and tried to boot my powerbook. The first time I did it, it took me past the white and grey apple screen and stuck on the blue screen, everytime after that, it hung up on the grey and white screen. I tried resetting everything through open firmware and zapping the PRAM, but no change. I tried booting into safe mode and it hung up at the grey and white screen. I was able to boot into single user mode and ran the check utility and everything came up ok. I reconnected the powerbook to the ibook and ran disk utility that way and repaired all permissions. It still has hung up on me. I've been trying to get this to work for almost 8 hours and nothing has worked for me. I'm starting to think its something really serious like a hardware failure. I don't know what version of tiger my powerbook shipped with and I'm not sure if having just 10.4 would cause this issue. I tried removing the added ram and everything as well. I hope someone can give me some things to try and hopefully get it to work. I'm pulling my hair out on this one. Any help would be greatly appreciated.

    One way to know if it is a hardware issue (or something you may have done in the DIY upgrade process, sorry) is to try putting back in the old stock 80GB drive and see if everything works well.
    If YES, then your PowerBook is fine and it is your new drive that is faulty. Return it or get a replacement under warranty (if relatively new, maybe you don't need to use the warranty).
    If NO, then something has happened during the upgrade process.
    That's my first diagnosis.

  • I cannot get wireless mouse to work in windows 7 using bootcamp

    I cannot get wireless mouse to work in windows 7 using bootcamp

    OK, that is a Bluetooth mouse so open Windows Devices and Printers>Add a Device Toggle the power (on the mouse) off and then on. he mouse should appear in the window, follow instructions to add it.

  • I just updated my iphone to IOS 7 and cannot get my imessage to work, it keeps saying "waiting for activation" nothing i have read online has helped me try to fix the problem. why is it doing this and how can i fix it?

    I just updated my iphone to IOS 7 and cannot get my imessage to work, it keeps saying "waiting for activation" nothing i have read online has helped me try to fix the problem. why is it doing this and how can i fix it?

    Here's a good troubleshooting article about imessage "waiting for activation".
    http://support.apple.com/kb/TS4268

  • Cannot get trackpad dragging to work

    I have gone to System Preferences -> Trackpad and checked off Tap to Click, Dragging, and Drag Lock. However, when I follow the same gestures that are shown on the demo video nothing happens when I try to drag using the trackpad.
    If I press the trackpad button I get dragging but if I double click dragging does not start. How can I get this working? I hate pressing the trackpad button!

    Well your comment got me to go look for the 3-finger dragging and it also works on my trackpad so I will try it out for a while.
    I'd still like to know why the other options simply do not work. I thought this was quite surprising for an Apple product but the more I look around the more I'm finding that sometimes "it just works" is not true at all.

  • Cannot get screen sharing to work long distance...

    I set up an AIM account for my mother-in-law so that I could remote screen-share her MacBook and help her with learning how to use it and trouble shoot it (it's a Late 2008 Aluminum MacBook hand-me-down from my wife).
    I've set up the account, but cannot get remote screen sharing working. Screen sharing works fine over bonjour, but no go over the internet using AIM. I can control my wife's MBA from my iMac and vice-versa, but neither of us can control her MacBook. When we choose "Ask to share users screen...", we get the pop up window stating "Waiting for response from user", along with the spinning gear icon. If she chooses "Share my screen with...", the pop up window appears on our Macs and we're able to choose accept. But then the pop up window switches to "User would like you to share his or her screen" and just sits there. Nothing happens. On her screen, she gets the message "waiting for response from user" and nothing else happens.
    After a long wait, my screen will say, "There was a communication error during your chat. Messages didn't receive a response from..." and gives me the option to report the details to Apple.
    What am I doing wrong?
    Her MacBook is running Mavericks, as are our machines.
    Message was edited by: pmpknetr21
    Message was edited by: pmpknetr21

    Hi,
    @mac.com and @me.com ID works as AIM Screen Names  (you add them like they are and existing name) but only if you are using Messages 7 or 8 plus later versions of iChat 6 in Lion.
    You should be able to use the Apple Issued IDs in Mavericks.
    If you using an AIM Registered name try using it without the @AIM.com or @AOL.com suffix (User Name only)
    As AIM can "read" the Apple Database it will think the Apple IDs exist already but may not tell you that is the reason you can't re-register them.
    Can you post the info being sent to Apple here ?
    However stop the log after about 10 lines of the Binary Images (I will not need it all).
    9:28 pm      Sunday; August 3, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • HT4557 Cannot get home sharing to work... When it has before

    I have new iPad latest os, windows vista w latest itunes update.. Cannot get home sharing to work.. Signing in and out, rebooting, reinstalling, has done nothing airplay works but no home sharing...???
    I had similar issues a few years back.. Signing in and out helped.. But not this time..

    Hello there, Mr Boggles.
    The following Knowledge Base article offers up some great steps for troubleshooting issues with Home Sharing:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/TS2972
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I Cannot get my organizer to work for Elements 13. "A problem caused the program to stop working correctly. Windows will close the program......" is the error I get. I've uninstalled and reinstalled the program and tried various other things based on the

    I Cannot get my organizer to work for Elements 13. "A problem caused the program to stop working correctly. Windows will close the program......" is the error I get. I've uninstalled and reinstalled the program and tried various other things based on the MANY other complaints with this same issue and nothing is working. How can this problem be corrected?

    Hi,
    Which operating system are you running on?
    Are you upgrading from a previous version of Photoshop elements or is this your first?
    Are you trying to load the organizer or the editor or do both fail?
    Brian

  • TS1574 I cannot get my sound to work! I have tried everything. Help?! :(

    I cannot get my sound to work. I have checked the system prefemces and nothing shows up, and nothing is editible.  I have rebooted and restarted it one million times, in safe mode too. When ever I try to adjust the volume a crossed out cirlce appears. I have no idea what people say about a red light, but I've checked and I cannot see one. I don't know what to do. Help? Thanks so much in advance.

    Have you tried a PRAM reset?
    http://support.apple.com/kb/ht1379
    Do the earphones work?
    Ciao.

  • I cannot get a slideshow to work on table version

    Hi
    I cannot get a slideshow to work on table version? What is the secret? I drop a blank slideshow and upload and not go? All I get is a gray box where the images should be or nothing at all?
    Please help. Pulling hair out.
    Thanks!

    I determined it has to do with motion and tablets. I placed slideshow on sub page and it viewed. I had scroll effects on home page and it does not work on tablets. However, I removed all scoll and motion but still tno appearing. I need to troubleshoot further. Here is link: http://ricci.lasso9.com/skinserenitymedispa.com/
    Any insight would be great for adding slideshow to home screen on tablet version.

  • I have installed Mountain Lion 10.8.2 but still cannot get email from my work exchange account. I'd appreciate any help.  Thank you.

    I have installed Mountain Lion 10.8.2 but still cannot get email from my work exchange account. I'd appreciate any help.  Thank you.

    You can go to the Apple online store and purcahse a copy of Mountain Lion.  This will give you a redemption code, which you can use to download Mountain Lion from the App Store.  Unfortuantely, I'm not aware of any other way to legally purchase it.  I have never seen Apple release Muontain Lion on DVD.
    In terms of Apple Service, they just need the serial number of the machine to check the purcahse date.  It is usually correct, to within a few weeks.  A quick Google search should give you the correct number to dial.
    I hope this helps.

  • I have installed Mountain Lion 10.8.1 but still cannot get email from my work exchange account. I'd appreciate any help.  Thank you.

    I have installed Mountain Lion 10.8.1 but still cannot get email from my work exchange account. I'd appreciate any help.  Thank you.

    I would delete the account and try to re-enter it. Also, you have to let your firm's IT department know that you want to sync work email on your personal devices before they actually work.

Maybe you are looking for