HT201412 IPad doesn't respond
I have the first generation IPad, has been working pretty good, mostly, started weird things with e-mail a few months ago, now it's totally frozen, won't open at all.
Show's the logo and the wheel, frozen also, then draines the battery and I have to plug it in again.. Haven't been able to open for about a month, afraid it might be a goner, Apple store to far away.. Any help out there ???
Try and force it into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Similar Messages
-
TS3274 My iPad doesn't respond to home button prompting and locks on a screen.
My iPad doesn't respond to home button prompting and locks on a screen.
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
A have a problem with the videos app and iTunes home sharing on multiple iOS devices.
This is my setup. On my iMac 2006 with Snow Leopard I have:
- 100+ dvd's ripped in my iTunes movie section
- 600+ episodes ripped in iTunes TV-section in 35 TV-shows
- 1 apple tv, 1 iPad 2, 1 iPad mini
On an average evening my family is watching different tv-shows simultaneously on the apple tv, the ipad, an iphone, and an ipad mini.
This is done through home sharing on the one iTunes library.
All updated apps, software etc..
What happens on the ipads, after viewing for more than 10 minutes, the user interface doesn't show up when tapping the screen. The touchscreen doesn't respond, only the home button works. Clicking the home button closes the app, but the sound of the video keeps on playing. Opening up the videos app again gives a black screen with sound still playing and still no button or UI.
The only workaround which currently works is killing the videos app. Power off the ipad and power on again, reconnect to the shared library, wait until it has found all the content (1+ minutes) and startup the tv show again.
All in all, a nasty way to pause your viewing or switching to another movie of tv episode, or even wanting to finish viewing.
The problem has haunted me for a year now, patiently waiting and hoping software-updates would fix it. They didn't.
A fix would obviously hugely improve my user experience, getting it on par with Apples usual quality of service.
Anyone familiar with this problem? Apple: is it possible to fix it in an update?Same here for over a year now.
You cant imagine how happy i am that im not the only one with this problem.
many of frinds have the same setup as me (ipad 2, 27"imac, express, apple tv 2)
No problem
I had the problem on Snow Leopard, lion and now on mountain lion.
I'am also starting to get a new problem - sometimes when waching a movie on iPad or ATV it just quits the movie and you have to start it again
on the iPad most of the time it also shows the wrong cover art. I tried all the hints here, and i works for a day or two then its wrong again
I store my itunes library on an external drive - you ??? -
My iPad doesn't respond to wifi
I have wifi through AT&T. On my iPad 2, sometimes the page I am trying to access will not load. When this happens, I turn off my iPad 2 then turn it back on and it works fine. This happens at least once a day. Please help. What can I do to fix this.?!?
I have wifi through AT&T. On my iPad 2, sometimes the page I am trying to access will not load. When this happens, I turn off my iPad 2 then turn it back on and it works fine. This happens at least once a day. Please help. What can I do to fix this.?!?
-
My IPad Doesn't respond and let me pass the ICloud backkup note after I click the OK botton.
Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
BTW - backup the iPad like you should. That will keep the message from reappearing. -
My iPad seems "locked". Dialog msg says I haven't backed up on iCloud in 5 weeks. I touch "OK", but iPad doesn't respond?
Thanks a million Randers4, it worked !!!!
-
My iPad doesn't want to respond.It says:iPad not backed up.Should I rest it and how do I do that?
To Perform a Reset ess here...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
my iPad is frozen.. it won't shut off.. i can't do a forced restart by holding the sleep/wake and home button.... it doesn't respond to that either.. i can't connect it to iTunes because it needs passcode entered but again the iPad is frozen so i can't input the passcode… I also can't do recovery mode as the ipad won't shut down for me to do a recovery mode.... HELP
Erase iPad and setup iPad from scratch
1. Launch web browser on your computer
2. Sign in to www.icloud.com
3. Tap on Find My iPhone
4. Select the iPad to be erased
5. Tap Erase iPad
6. Message: All your content and settings will be erased. An erase iPad cannot be located or tracked
7. Tap Erase
8. Enter Apple ID and Password
9. Tap Next
10. Enter a phone number where you can be reached. It will be shown on your iPad after it has been erased
11. Enter phone number
12. Tap Next
13. Tap Erase iPad
14. This message will be shown on your iPad after it's been erase "This iPad has been lost. Please call 12345678"
15. Done
16. Erase started
16. OK
17. Remove from Account (this will allow iPad to be activated and used by another person)
Setup wiped iPad
1. Slide to unlock
2. Select English
3. Select Country
4. Choose Wi-Fi Network
5. Enter Wi-Fi password
6. Activate iPad
7. Apple ID and Password
8. Apple ID and Password
9. Enable Location Service
10. Select "Restore from iCloud Backup"
11. Enter iCloud password
12. Agree to Terms and Conditions
13. Choose backup
14. Select "Backup file in iCloud"
15. Hello (Welcome)
16. Slide to unlock
17. Update Completed
18. Continue
19. Enter Apple ID and Password
20. Updating iCloud
21. Select "Don't Add Passcode"
22. Welcome to iPad
23. Get Started
24. Restore Apps and Media. Your settings have been restored. Connect to power to save battery while apps and media are downloading
25. Sign in to iCloud -
I did all the options given up but my Ipad still doesn't respond. What am i suppose to do now?
My ipad wasn't responding. I restared it but still it didn't respond ... Got it checked, the person said the software crashed got the new software upgraded but it still doesn't respond. Only shows the apple logo. tried charging but it wouldn't charge too.
-
Any Ideas why my two day old ipad touch screen periodically doesn't respond to touch?
Any Ideas why my two day old ipad touch screen periodically doesn't respond to touch?
See what you missed here:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Please can you help. My ipad is frozen. A box is permently on in the centre of the screen saying not enought storage. When i press on the words CLOSE or SETTINGS it doesn't respond. It won't slide to unlock or close down. The ipad is 16GB and about a year old. Any suggestions.
AnnmarieTHis suggestion also worked for my iphone! After a few warnings, the screen on my iPhone froze. there was no way to make phone calls or manage my iCloud storage or even turn it off. I deleted all the photos on my iphone, checked storage and nothing changed. So I purchased more storage, did the backup and still the screen remained frozen. To be sure, I checked that the new amount of storage was registered, it was but somehow my Mac showed the backup I had just performed (a couple of times) not having happened (it show the last one some 2 weeks before). Weird but I followed your suggestion (wish I had seen it before I purchased new storage) and Ta DAH!!! I'm back in business too. thanks!!
-
Hello,
When I turn on my iPad 2 and go onto the safari and go onto google the wireless router cuts off and turns the Internet off and the Internet doesn't respond and then after I have to turn the router off and turn it on and then it is back to normal it has happening when I recently updated the new iOS 6 on my iPad since then it was been doing this please can you help and help me sort the problem out
ThanksSome things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
TS3274 iPad won't shut off. Display doesn't respond to slide motion.
iPad won't shut off. Display doesn't respond to slide motion.
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).
-
HT201412 My iphone 4s Doesn't respond or power on/off !!!!!!
My iphone 4s Doesn't respond or power on/off, The screen is like if it is turned off, no voice no nothing, but when I call it from another phone it doesnt say that it is off, I hear ringing but my iphone is dead with no voice or light or anything,
This happened to me before the iphone battery was 20% and after 5 min this happend, I connected it to the charger for more than half an hour but even the red battery light that indicate the recharging process didn't came up, after 3 hours when I gave up and was going to find someone to fix it I put on the charger for the last time and it WORKED so I thought maybe that was something with the battery and no problem, Than was 2 months ago, It happened again this morning I found the same thing and tried everything but nothing works .. after 3 or 4 hrs it worked again,
What is wrong with my iphone? it's new I bought it 4 months ago, never falls on the ground as I take very good care of it, what should I do?
The problem is that I Live in Kuwait, and when I searched for apple support in Kuwait I found nothing, What Do u guys think the problem is? what should I do about it ?Maxitrol_phd wrote:
Isn't this Apples's official forum? I mean 2 days, 49 reviews but no response? What is going on?
No, it is not Apple's official forum. It is a user to user forum. If no user knows the solution then no one will post an answer. Likewise if no one understands your question. -
My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom
Maybe you are looking for
-
Someone please help me to find a USA to US power adaptor for the Zen Mic
Help ! I recently received a 40th birthday present zen micro from a relati've in New York, however the plug is the USA 'two flat pin type'. I have detached it from the power supply to find two smaller pins underneath so please someone tell me where I
-
Importing Hi 8 video through Panasonic DVX 100
Here's my dilemma... I want to capture Hi 8 video. I have hooked up my original Sony Handycam camera as the player - feeding video into my Panasonic DVX 100 through the old school red-yellow-white cables. My Panasonic DVX 100 video out is a Mac Firew
-
CO Assingment to Change in Inventory A/c
User is trying to transfer finished goods from one plant to another plant and the system is giving message that "Change in inventory a/c requires a CO assignment.." I want to know what is the accounting entry generated at the time of stock transfer f
-
1 We are developing a Tabular Model. In this model there are likely to be about 15 dimension tables and 2 main fact tables. 2 One of the fact tables is very large approximately 70 million rows and will increase to 150 million rows in about 2-3 year
-
Can't insert to a table which has a trigger uses distributed transaction.
Hello! I'm using Oracle 8.1.6 and ODBC driver 8.01.0500. The trigger selects some data from an other Oracle database using database link. If I insert into this table with ODBC (from Access or from Oracle ODBC test app), I get an oracle error about PL