HT201412 MY IPAD DOESN T TURN ON ITS WRITTEN TO TURN ON ITUNES AND WHEN I DID ASKED TO RESTORE SO I DID AND IS NOT INSTALLING THE SOFTWARE
MY IPAD DOESN T TURN ON ITS WRITTEN TO TURN ON ITUNES AND WHEN I DID ASKED TO RESTORE SO I DID AND IS NOT INSTALLING THE SOFTWARE
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
Similar Messages
-
HT201412 My iPad doesn't turn on, what can I do with it? Can I sell it to apple?
I was updateing the new software
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
If I go into settings and physically touch the WiFi that has been used since his was new than after waiting for 2 to 3 min it finally goes on line. I never had any problems until this last update. It always went on line automatically with out having to go into settings. Just a pain. Once I do this it usually stays on line.
Tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
If that didn't help, try here > iOS: Troubleshooting Wi-Fi networks and connections -
On my iPad some of my album covers simply show a question mark and do not display the cover
I know this is probably some issue from downloading, but the covers used to show and it is only a select amount of album covers that display the "?" Any help? Thanks!
Try contacting Support in your country, after confirming your id and that it's your account they should be able to reset its password.
Contacting Apple about account security : http://support.apple.com/en-us/HT5699
If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html
When they've done that update the primary email address on the account to be an account that you have access to e.g. by tapping on it in Settings > iTunes & App Store and logging into it, via the Store > View Account menu option on your computer's iTunes, or via the 'manage your apple id' button on http://appleid.apple.com -
I have changed my Apple ID when I got a new email address and confirmed it. However when I go to my iPad to buy an app my old Apple ID comes up and will not recognize the password. I tried going into the settings on my iPad and tapping on the old Apple ID to go in to change it but it will not recognize it and I cannot get in on the iPad to change it. How do I change this ID on my iPad for the iTunes store?
JaylsworthHow did you fix this??
-
Ipad doesn't turn on after ios6 update
Hello
I updated to iOS6 yesterday and when I got it this morning it doesn't turn on anymore.
I let the update running during the night (because it was expected to last 3 hours) and when I woke up the iPad doesn't turn on. I tried to hold the sart button , the home button, long, short, but nothing worked.
Can you help me with that ?
Thanks a lot.
Best regardsCarioca23:
So glad the solution worked for you! I was panicking that my iPad (3rd gen, 4G LTE, wi-fi) was dead and started to search for solutions. I discovered after trying it a few times that the seemingly dead iPad came back to life and is now working full force with no problems. The battery was no where near dead, so that didn't cause the problem. It seems this problem is happening with iPad 2 as well.
I hope this solution helps many others who are experiencing this problem. I heard it worked for the iPhone too with this same problem. Good luck everyone! -
Why does my 1st gen iPad always turns itself off and goes back to the screen. Whether I'm reading news, iBooks, etc, suddenly it goes off.
If that doesn't help, the battery may be dying and need replacement. See here (tap on Battery Replacement): http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Alternately, might consider start saving for a new iPad. The newest iPad 6 should come out in the next few months. When it does, sellers will want to get rid of old inventory with good deals. -
So I got the ipad for christmas, turned it on & it worked fine. Later I entered a passcode. Now I can remember the passcode & the ipad is locked for 60 mins. The ipad was never configured to a computer at the beginning. someone help.
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup. If you do not have a
backup to restore, then restore as New. -
Hi, I bought an iPod 2 and I jailbreaked it before. I tried to download the iOS 5.0.1 from the Settings icon on my iPad 2 but then my iPad wouldn't turn on anymore and it kept on showing a screen with an arrow pointing to an iTunes symbol. I later learned that this was the recovery screen so I tried to put it out of the recovery mode by pressing the home button and power button simultaneously, but the screen kept on returning back to the recovery screen. I could not restore the iPad 2 on iTunes either, so I downloaded Tiny Umbrella 5.10.01 and tried to save the shsh. However, under the recovering devices section on the left side, my iPad did not appear and I only got a device titled ?18092..... I tried to save the shsh of this ?18902... anyways but this did not work. So, I clicked on the device and pressed the exit recovery but then my iPad2 screen went black with a white apple logo in the middle. This logo keeps on dimming and disappearing and even when I plug my iPad 2 to the computer, neither my iTunes nor the Tiny Umbrella notice it. I need urgent help!
eddiekero wrote:
Hi, I bought an iPod 2 and I jailbreaked it before. I tried to download the iOS 5.0.1 from the Settings icon on my iPad 2 but then my iPad wouldn't turn on anymore and it kept on showing a screen with an arrow pointing to an iTunes symbol. I later learned that this was the recovery screen so I tried to put it out of the recovery mode by pressing the home button and power button simultaneously, but the screen kept on returning back to the recovery screen. I could not restore the iPad 2 on iTunes either, so I downloaded Tiny Umbrella 5.10.01 and tried to save the shsh. However, under the recovering devices section on the left side, my iPad did not appear and I only got a device titled ?18092..... I tried to save the shsh of this ?18902... anyways but this did not work. So, I clicked on the device and pressed the exit recovery but then my iPad2 screen went black with a white apple logo in the middle. This logo keeps on dimming and disappearing and even when I plug my iPad 2 to the computer, neither my iTunes nor the Tiny Umbrella notice it. I need urgent help!
At this point only a restore will fix your issue. -
im trying to instal snow leopard on my macbook. its running tiger 10.4.11 and it meets all the requirements but it ask me for a restart to begin instalation progres, i restar it and it doesn't happen anything. anyone can help me?
I assume the restart was prompted during the installation process?
First of all, that restart will take several minutes while files are moved into place and should not be interrupted.
If it fails, or you have interrupted the process, you'll need to boot from the installer (hold down the C key on startup) and use Disk Utility to erase the drive prior to continuing the installation.
That will wipe all data on the drive, though, so if you didn't make a backup before beginning the upgrade, you'll need to get your data off safely before proceeding. That may likely require the use of another Mac to access yours in Target Disc Mode. -
Phone doesn't turn on. And keeps on blinking when connected to charger
Please help me.. Phone doesn't turn on. And keeps on blinking when connected to charger.. The logo keeps coming up and then vanishes..
Similar problem here. Iphone 5 32gb met iOS 8.1.2 keeps blinking apple logo when connected to the charger but doesn't start up. iTunes doesn't recognise it, but i managed to get it into recovery mode. But sadly the update stops with an unknown error 2001. Changing cables, ports or even laptops doesn't help. DFU mode gives similar results.
Any suggestions where to go from here? -
My iPad mini keeps turning itself off and then the apple logo keeps flashing constantly, i have charged it fully and restored it many times. what can i do?
If you have restored to factory settings and started as new, there is nothing more that you can do on your own. Make an appointment at an Apple Store and ask them for help. You might have a hardware problem and the Apple Store techs will be able to determine that.
-
My husband and I just bought a new Ipad 2. We turned it on and we are on the screen that says "Choose a Network" we would like to choose one of the free Wi-Fi networks but we cant go any further. We have tried tapping the button on the bottom but nothing happens - What do we do now?
Connect it to your computer via the supplied sync cable and restore.
-
I revive messages from everyone but one person on my phone I had my iMessage on my iPad but I turned it off and also off on my phone but I can't seem too receive messages from them but they get mine,?
They have an iOS device? If so, have them send as an SMS, not an iMessage.
-
After IOS 7.0.4 Updation My ipad 4 started to turn off frequently and i cannot use the ipad morethan 5 minutes, how to resolve this issue.
Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset.
Maybe you are looking for
-
Two signatures required on a document-one person applies both signatures and approves the document
Does anyone know how to disallow someone from putting two digital signatures on a document when one signature is for the employee and the other is for the supervisor's approval? We have never allowed digital signatures because someone raised this que
-
How do is get back to Read & Write permissions on HDs ?
Hi gang, I was trying to set up one central folder for 4 iTune users (accounts) in our household. One of the blogs said put in "Shared" folder and set permissions to "Read & Write". I tried but on "Everybody" is does not offer the "R&W" option, just
-
IPhone isn't recognized by iTunes or computer
Both my computers are running Windows 7 (one 64 bit) but the 64 bit version doesn't recognize my iPhone 4 running iOS4.0.1 but the 32 bit version works perfectly (both computers have iTunes 9.2.1. When I plug the phone into the 64 bit computer it mak
-
Could not open PDF Files with Safari using Lion - Solution
Two for one solution: After installing Lion on my Macbook Pro, I could not open PDF files on line via Safari and iPhoto 11 kept crashing. Well, the solution for bothy problems was to remove the "3ivx" file. The easiest way to do so is go to Applicat
-
Primavera P6 WebAcess "java.security.AccessControlException: access denied"
Hi, everyone. We try continuing evaluation and testing our P6 installation. We have deployment our "primaveraweb" on an WebLogic 11.g When try to access to our "activities": Dashboards -> Personal Workspace -> "my project" -> Activities of "my projec