HT202157 with update 5.1 for ATV2, the learn remote issue

I've just updated my ATV2 to 5.1.  Now the learn remote "select" key stops working.  Now the learned remote can't click (it just gives an incorrect button error)

Thanks. I had that monster 30 some Mb update, and ended up with 9 permissions not repaired in the SUID area. I re-upped with the link you provided, and all is well, with the exception being the ONE SUID error/warning.
Thanx
F

Similar Messages

  • Hello Sir I have an iPhone 4 and when i updated that it got updated but now for restore the data it is showing me the message The "iPhone" could not be activated because an unknown error occurred (0xE8000004). Please try again later. please help me.

    Hello Sir I have an iPhone 4 and when i updated that it got updated but now for restore the data it is showing me the message The "iPhone" could not be activated because an unknown error occurred (0xE8000004). Please try again later. please help me.

    Hello Amarchand Sharma,
    Are you working with a Windows computer?  If so, the resource below may help you troubleshoot the issue you are having restoring your iPhone.
    iOS: Unknown error containing '0xE' when connecting to a Windows PC - Apple Support
    http://support.apple.com/en-us/TS3221
    Regards,
    Judy

  • HT1343 how to use the options with F10, F11, F11 for turning the sound up or down or mute?

    Hi, I'm Hannah. I'm using a Mac. Can you show me how to use the options with F10, F11, F12 for turning the sound up, or down or mute? Thank you very much

    Normally simply pressing them should do what you want, F10 to mute; F11 to decrease volume; F12 to increase volume. However, it's possible that you have a box ticked in Keyboard preferences which modifies the behaviour of the keys, requiring you to also hold down the Fn key (bottom left key on the keyboard) to enable the function.
    Check System Preferences>Keyboard to makes sure the box indicated in the image isn't ticked.

  • HT202159 Problem with Update on   It started, then the screen went white and the icons for the apps on the desktop were all blackened, 'waiting'.  What now?

    It showed a number of apps to be updated on my iPad, so I clicked 'update all' as usual.  It started, then the screen went white.  The icons for the apps on the desktop went black, as they do, with the first one half way around the little circle timer, and two marked 'waiting', with others not that far into the process.  They all stopped.  Now I can't stop the update process in the App Store, or use any of the apps.  What do I do next?  Help, please!

    Hello there, Rev Susi.
    From what I can gather you have a few apps that only display "Waiting". The following is a past discussion that dealt with a similar issue, the answer may help you as well:
    App updates won't download on my...: Apple Support Communities
    https://discussions.apple.com/thread/4111336
    Try tapping the App, so that it changes to Paused instead of Waiting, then tap it again to resume the install.
    Make sure you don't have any paused downloads in other apps either, like the App Store or iTunes Store.
    If that doesn't do it, try resetting or restoring the iPhone.
    via whatheck
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Issue with Update Rollup 5 for Exchange 2010 SP3 - Mailboxes that were auto mapped not working

    Below is  my response in another thread but creating a new one in the hopes that someone has the same issue and a solution besides mine below.
    Ever since we installed Update Rollup 5 for SP3 Exchange 2010 mailboxes that were auto mapped are not accessible. They all get the same error.
    Cannot expand the folder. The set of folders cannot be opened. The attempt to log on to the Microsoft Exchange has failed.
    What I have been doing is removing the users permission, then adding them back using the noautomap switch in Powershell. After doing that, the user manually adds the mailbox and all is well.
    Just a note here, I suspect it may have something to do with the version of Outlook 2010. We are running an older version here. I think only SP1 with no other incremental updates. Office is up to SP2. Also, one of the users I was working with could not access
    the mailbox no matter what we tried but she can walk over to another workstation and open Outlook and access the very same mailbox so that pretty much proves its software related particularly with Outlook.
    I cannot reproduce the problem on a workstation (XP) with a newer version of Outlook.
    This has been wearing me out and I suspected the Update Rollup all long. Now I am confident as others are having the same problem. If you find out anything on how to fix this other than the steps above, let me know.

    Not sure why it was suggested to use the auto mapping feature to grant permissions because that is the component that is causing the issue. Also, there is nothing wrong with the auto configuration because the user can access their own mailbox just fine and
    also select mailboxes in their Outlook that were NOT auto mapped.
    With that said, here is how I fixed them all.
    Remove the permissions using the Exchange Console. Don't forget Send As
    Wait about 15 minutes. The mailbox should disappear from the users Outlook
    Open an Exchange PowerShell window and run the following command:
    .\add-mailboxpermissionsnoautomap.ps1 -Identity mailbox -User user -AccessRights FullAccess
    Have the user add the mailbox to their Outlook using the manual process.
    All is well....
    If you don't have the PS script add-mailboxpermissionsnoautomap.ps1, you can download it. I stumbled across it a few years ago and use it all the time. If you can't find it, just use the Exchange built in command for adding mailbox folder permissions but
    specify automap $false.
    The idea here is to grant the user access without auto mapping.

  • Machine deployed from Windows 8.1 media with Update slipstreamed prompting for installation of KB2919355

    I'm preparing a "Windows 8.1 Update" OS deployment in SCCM and have encountered an issue.
    Here's what I did:
    Downloaded SW_DVD9_SA_Win_Ent_8.1_64BIT_English_-2_MLF_X19-49847.ISO from the Volume Licensing site
    Extracted install.wim from the ISO
    Mounted the WIM with DISM to add the KB2959977 package (as directed
    here, using
    these instructions)
    Deployed the image with SCCM
    After imaging a VM and booting it, I went into Windows Update and was prompted to install "Windows 8.1 Update for x64-based Systems (KB2919355)". It is my understanding the media I used should have the Windows 8.1 Update integrated into it. Can
    anyone explain why Windows Update is offering this update to be installed?
    Edit: Here's the output of "dism /image:mount /Get-Packages" ran against the WIM which confirms the KB2919355 package is applied to the WIM:
    Deployment Image Servicing and Management tool
    Version: 6.3.9600.16384
    Image Version: 6.3.9600.17031
    Packages listing:
    Package Identity : Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.3.9600.16384
    State : Installed
    Release Type : Language Pack
    Install Time : 18/03/2014 9:30 AM
    Package Identity : Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.3.9600.16384
    State : Installed
    Release Type : Foundation
    Install Time : 22/08/2013 2:46 PM
    Package Identity : Microsoft-Windows-Security-SPP-Component-SKU-Enterprise-GVLK-Package~31bf3856ad364e35~amd64~~6.3.9600.16384
    State : Installed
    Release Type : Feature Pack
    Install Time : 18/03/2014 9:51 AM
    Package Identity : Package_for_KB2919355~31bf3856ad364e35~amd64~~6.3.1.14
    State : Installed
    Release Type : Update
    Install Time : 18/03/2014 10:20 AM
    Package Identity : Package_for_KB2919442~31bf3856ad364e35~amd64~~6.3.1.8
    State : Installed
    Release Type : Update
    Install Time : 18/03/2014 9:55 AM
    Package Identity : Package_for_KB2932046~31bf3856ad364e35~amd64~~6.3.1.5
    State : Installed
    Release Type : Feature Pack
    Install Time : 18/03/2014 10:20 AM
    Package Identity : Package_for_KB2937220~31bf3856ad364e35~amd64~~6.3.1.0
    State : Installed
    Release Type : Update
    Install Time : 18/03/2014 10:20 AM
    Package Identity : Package_for_KB2937592~31bf3856ad364e35~amd64~~6.3.1.0
    State : Installed
    Release Type : Feature Pack
    Install Time : 18/03/2014 10:20 AM
    Package Identity : Package_for_KB2938439~31bf3856ad364e35~amd64~~6.3.1.0
    State : Installed
    Release Type : Feature Pack
    Install Time : 18/03/2014 10:20 AM
    Package Identity : Package_for_KB2938772~31bf3856ad364e35~amd64~~6.3.1.0
    State : Installed
    Release Type : Update
    Install Time : 18/03/2014 10:20 AM
    Package Identity : Package_for_KB2939471~31bf3856ad364e35~amd64~~6.3.1.0
    State : Installed
    Release Type : Update
    Install Time : 18/03/2014 10:20 AM
    Package Identity : Package_for_KB2949621~31bf3856ad364e35~amd64~~6.3.2.0
    State : Installed
    Release Type : Hotfix
    Install Time : 18/03/2014 10:20 AM
    Package Identity : Package_for_KB2959977~31bf3856ad364e35~amd64~~6.3.1.1
    State : Installed
    Release Type : Update
    Install Time : 16/04/2014 11:19 PM
    The operation completed successfully.

    This is explained in this KB article, where it states:
    The MSDN and VLSC updated ISOs do not contain the complete set of fixes that are offered from Windows Update. Therefore, Windows Update and WSUS will offer the KB2919355 update again to computers that are deployed by using the images in these ISOs. This
    is expected and does not result in the full reinstallation of the Windows 8.1 Update but only one smaller component of it. The rest of the update will not be downloaded or reinstalled.
    Hope this helps,
    David
    Windows Outreach Team - IT Pro
    The Springboard Series on TechNet

  • ADF Mobile updating a column for all the rows

    Hi Every one,
    This is My ADFMobile Usecase:
    In My use case, I created DB Webservices  and created a  datContol on it .
    I have few AMX pages in my Taskflow.
    1st page: Authentication page with userid and p/w.
    2nd page:Need to get DeptID as  LOV and a submit button.
    3rd Page:Need to get all Employees in that Department. Need to get Empl_name, Empl_Id, Empl_salary and Empl_ Attendence. and a SYNC Button.
    Up to now every thing is fine.
    But I need to change  Empl_Attendence Column As absent or Present . I used  SelectOneChoice. Default there will be PRESENT value in back end.So after Selecting  SlectOneChoice the value (Absent) should Automatically update in DB for that row.
    Requirement:
    So How to write logic for the SYNC button to update the Empl_ Attendence for all the rows at a time.
    Thanks In Advance
    Regards
    Varma.

    Hi Every one,
    This is My ADFMobile Usecase:
    In My use case, I created DB Webservices  and created a  datContol on it .
    I have few AMX pages in my Taskflow.
    1st page: Authentication page with userid and p/w.
    2nd page:Need to get DeptID as  LOV and a submit button.
    3rd Page:Need to get all Employees in that Department. Need to get Empl_name, Empl_Id, Empl_salary and Empl_ Attendence. and a SYNC Button.
    Up to now every thing is fine.
    But I need to change  Empl_Attendence Column As absent or Present . I used  SelectOneChoice. Default there will be PRESENT value in back end.So after Selecting  SlectOneChoice the value (Absent) should Automatically update in DB for that row.
    Requirement:
    So How to write logic for the SYNC button to update the Empl_ Attendence for all the rows at a time.
    Thanks In Advance
    Regards
    Varma.

  • So frustrated that updating software has lead to the most annoying issues I couldve avoided by NOT updating!!!!!!!!!!!!

    I reallllllllllllllllllllllly wish someone could help me out with this. My contacts are not syncing with phone calls or text messages. Im only getting the phone# and when I try to add a contact from a text message that's already in my address book, it repeats the #, one under "mobile" and one under "iPhone". ***?!?! I'm never going to do a software update EVER AGAIN, how in the world does trying to help make your phone better make it worse?? I've tried the iCloud thing, I've tried turning it completely off then on again, I've tried just about everything I can think of and NOTHING is helping. I've made another appt. to speak with an Apple customer service rep, but got nowhere when I spoke with one yesterday. I'm hoping someone can help me out with this...everytime someone texts me, I have to try and figure out who it is, I try to go into my contacts and start a search with the area code, but that doesnt help me because it wont search with the # only the name...I'm beyond annoyed with this situation and would greatly appreciate anyone's help!

    In earlier threads about other routers, this feature had to be disabled in order to log in:
    orange Firefox button ''or'' Tools menu > Options > Security tab
    ''Uncheck'' "Tell web sites I do not want to be tracked"
    But if it worked in Firefox 4, that probably isn't the problem...
    Can you check whether turning off saving of passwords helps with that second part?
    orange Firefox button ''or'' Tools menu > Options > Security tab
    ''Uncheck'' "Remember passwords for sites"
    You also could try Firefox's Safe Mode.
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Close Firefox and... hold the Shift key and restart Firefox. When you get the initial dialog, don't reset anything. More info:
    [https://support.mozilla.com/kb/Safe+Mode Safe Mode].
    Does that improve the situation?
    If all else fails, we might need help reviewing the bug fixes in Firefox 5 to see whether any might be related; it's a huge list:
    http://www.mozilla.com/en-US/firefox/5.0/releasenotes/buglist.html

  • Does the 1.1 Update offer any relief from the "random pause" issue?

    My iPod is exhibiting the "random pause" issue and is going to the Apple Store this weekend. In the meantime I'm going to install the v1.1 update, but just wanted to get some feedback on whether this fixed the problem for anyone else?
    Thanks.

    My iPod is exhibiting the "random pause" issue and is going to the Apple Store this weekend. In the meantime I'm going to install the v1.1 update, but just wanted to get some feedback on whether this fixed the problem for anyone else?
    Thanks.

  • Problem with Updated Webcam Software for Windows 7 (I AM NOT USING THE BETA VERSION OF WINDOWS 7)

    I have a dv5-1235dx.  HP posted new software for Win 7 (64) built in camera software.  The install seemed to go fine, but once you click to run the software, nothing happens, so it seems.  About a minute or so later, the application opens.  Why is it taking so long to open.  I have uninstalled/reinstalled multiple times and the problem still exist.  I have tried to go back to the old vista version of the software (running in cap mode), but now that software takes a long time to load.  I have done a restore, with no affect.  What happened?  Note:  I am using the full retail version, not a beta of Win 7 Ultimate.  None of the other Updated HP software has this problem.  HP won't help because Windows is not officially released yet.

    HP MediaSmart Webcam here
    Message Edited by Daniel_Potyrala on 10-17-2009 03:03 AM
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • What usb auto switch is compatible with OSX and Windows for sharing the same printer

    I just bought a new iMac for myself to replace my old Dell PC.  My husband still has his PC with Windows Vista and our work stations are set up to share the same MFC with a Belkin auto switch.   Unfortunately that software is not compatible with my OSX and I am having trouble searching for another auto switch that is compatible with both computer operating systems.  Can anyone recommend one to me?

    Hmmm, we bought a brand new V300 from Epson and hooked it up it didn't work. We went through all the steps, downloaded all the drivers, and after several days of frustration, it still did not work so we returned it.
    Apple hasn't been able to give us technical advice, Epson couldn't help. The only scanners sold locally are the printer/scanner combos.
    I was looking at the Fujitso ScanSnap 1500M earlier tonight... am wondering if I can get by with this scanner since most of my scanning nowadays has to do with business documents. It sure would be nice to organize clutter and the text said something about compatible with the "cloud" as well.
    I use my iPad all the time to show galleries & collectors the quality of my paintings... type up proposals, etc. Thanks for letting me know about it's compatibility with my iPad, iPhone and Mac.
    Thank you for your input, AppleMan1958. you are wonderful.

  • Problem with updating ABC indicator for Material

    Hi All,
    My client wants to run cycle count for one warehouse.Since the material master does not have ABC indicator in Storage view, Iam using MIBC for updating the Material Master. But after executing MIBC also ABC indicator is not getting updated in the Material master. Please help.
    Rgds
    Srinivas

    Hi, You need to have an history of at least several months of movements in order to do this analysis. You need also to flag "all articles held in stock" in order to select articles without ABC indicator. Rgds, Philippe

  • Help with update 5.0 for Bold 8520

    I've being trying to update my device software but it's impossible, not even downloading the archive from the web. 
    Everytime I plug in my phone and open the blackberry manager to do whaterver it gives me the message that I haven't installed the Blackberry Device Manager . I updated my desktop manager to version 5.0, and I tried to update my device software and it says that I don't have any updates, after that I have deleted the files device.xml and vendor.xml but again when I plugged in my phone it comes the message that the Blackberry Device Manager is not installed. I've uninstalled the desktop manager and it let me use once but again no update for my phone software and then again the same message that i haven't installed the Blackberry Device Manager
    My carrier company here in Ecuador wont help me cause I bought the phone in the USA, but anyways I have friends that have the same problem as and they have bought in Ecuador to Movistar (my carrier) the same phone and the update to 5.0 doesn't work. If you have any ideas of what should I do I'll appreciate it. Thanks

    Yes I tried that too. I uninstalled the Blackberry Desktop Manager and also following this instructions from this page   
    http://www.blackberry.com/btsc/search.do?cmd=displ​ayKC&docType=kc&externalId=KB02206
    I installed again the Blackberry Desktop Manager and again the same problem it just gives me the option for the Blackberry version 4.6.1.314 the one that I already have, and then when I try to download the update from the blackberry web page it sends me the message "The Application Loader Wizard requires the Blackberry Device Manager to be installed. Please contact customer support"
    I went to this page  http://www.blackberryfaq.com/index.php/BlackBerry_ Operating_System_Downloads as I saw it will help me download Blackberry's Operating System for my carrier and device, but my carrier it's not listed, it's Telefonica or Movistar Ecuador. I called customer support of my carrier and they wont help me as my phone was bought in the United States and not from them. I don't know the carrier was this phone bought from. 
    I really need your help, I being trying to get help from the blackberry help from twitter but I already done what the have told me to do and it didn't work. 
    Thanks

  • Problem with update of firmware for 5300

    Hi,
    I have following problem while trying to update my firmware from version 5.51 to 7.00 on my 5300:
    I am connecting the phone through usb cable to PC-suite 7.0.9.2 and the update starts normally. Works fine till it reaches exactly 15%. There it shuts down the phone and loses the contact with the phone. Now I am asked to reconnect the phone and click retry. Same thing again and again and... again........
    Note that I can not start the phone untill I disconnect the cable and take out the battery!
    Does any one know how to get over this point and end the update???

    EI! How come no one answered this topic? Help this dude please.. Coz i'm in the same case as he has.. oww, man..

  • Problems with updating MSN Messenger for Mac

    Install the MSN Messenger for Mac from Application. When I signed in, a message pop up asking me to get a new updated version or else I could not continue to use the MSN Messenger. During downloading, another message pop up saying that the Messenger.bin is neither compressed .... and I could not go any further,and as such could not use MSN Messenger. What's the problem here?

    nkmz02:
    Welcome to Apple Discussions.
    To download click here.
    Good luck.
    cornellius
    Message was edited by: cornelius

Maybe you are looking for