HT203390 can anybody help have tried to restore my phone but error 3194 comes up saying unknown error anybodu got any advice

hi can anybody help me please have tried to restore phone but error3194 comes up

Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694#error3194

Similar Messages

  • I have an iphone 4 jammed in MDU mode, I conect to itunes and asked to restore, it went through all the steps and nearly completed it gives me an error message saying cannot be restored error -1.  Can anybody help me how to restore my iphone

    I have an iphone 4 started the problem saying no service, then when restarting asked to connect to itunes and became jammed in MDU mode, I connect to itunes and clicked on  restore, it went through all the steps and nearly completed it gives me an error message saying cannot be restored error -1.  Can anybody help me how to restore my iphone.  or what to do next, some reseller asked me to go the shop where I bought to replace it for me as this error cannot be restored by any shop.  It has to be returned to apple and get it replaced.  The warranty already expired and don't know what to do.
    Please help

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    http://support.apple.com/kb/TS3694#error1

  • HT201210 i have tried to restore my phone which isnt working, ive followed all the tips it tells you to follow but nothing is workin. everytime i try to switch my phone on i just get the itunes symbol and a usb cable symbol!! im stuck...can anyone help

    i have tried to restore my phone which isnt working, ive followed a few tips as to upgrade new version but it still isnt working.
    i just get a itues and usb cable symbol when i try to turn my phone on??

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    But... if the Device has been Modified / Hacked / Jailbroken... this will Not necessarily work.

  • So i tried downloading ios8 and my phone is stuck in recovery mode. i have tried to restore it in itunes and it continues to say itunes does not recognize my phone. i have all my systems up to date and i have tried restarting my computer. help

    So i tried downloading ios8 and my phone is stuck in recovery mode. i have tried to restore it in itunes and it continues to say itunes does not recognize my phone. i have all my systems up to date and i have tried restarting my computer. help

    Me too and I have 4 devices which are now not recognized by iTunes but were immediately before ios8 upgrade
    Come on Apple get your finger out and help us here please ?

  • HT4367 I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?

    I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?

    Welcome to the Apple Community.
    Are you following these instructions.
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Source list, and then click Restore.

  • HT201210 I,m trying to restore my phone but I keep getting Error code 21.... help please

    I,m trying to restore my phone but I keep getting Error code 21.... help please     iPhone 4S

    Take a look at this Apple doc -> iTunes: Specific update-and-restore error messages and advanced troubleshooting
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
    You could just update or uninstall the security software on your computer and then test again.

  • Recently I erased an iPhone 3 so that it could be passed on and used by someone else, using the erase all content and settings feature. This has killed my iPhone and it is now stuck on the Apple logo. I have tried a restore in iTunes but recovery fails.

    Recently I erased an iPhone 3 so that it could be passed on and used by someone else, using the erase all content and settings feature. This has killed my iPhone and it is now stuck on the Apple logo. I have tried a restore in iTunes but recovery fails. This is not a jailbroken iPhone. Anyone have any suggestions on how to proceed?

    If you haven't already tried, see if you can force it into recovery mode to restore it:
    http://support.apple.com/kb/ht1808.  If that doesn't work, the last thing you can try is to put it in DFU mode to restore it: https://discussions.apple.com/thread/2648467?threadID=2648467&tstart=0.

  • TS3694 i have tried to restore my iphone but keep getting error 1015 any suggestions

    i have tried to restore my iphone but keep getting error 1015 any suggestion

    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • I am currently using a Iphone 4.I have been trying for countless times to restore my phone but error 16 keeps on popping up.This happened after i updated to the latest IOS.Does anyone have any solutions other than jail-breaking.I have never jailbreaked.

    I am currently using a Iphone 4.I have been trying for countless times to restore my phone but error 16 keeps on popping up.This happened after i updated to the latest IOS.Does anyone have any solutions other than jail-breaking.I have never jailbreaked.I am deperate to restore my phone...Please help!!!!

    Most likely a hardware failure, & if so, you won't be able to restore/activte your phone. If you've tried at least two times, & are still getting this error, make an appointment at any Apple store, or call AppleCare.

  • My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?

    My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?

    Hi sunnylordz,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like you have no service on the iPhone. It looks like you have already done some troubleshooting. There is one step you did not mention trying that i think is worth trying. 
    If you see No Service in the status bar of your iPhone or iPad - Apple Support
    Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
    Cheers,
    Mario

  • Have tried to restore iPod twice but still showing only USB cable to be connect to iTunes..

    I have download and update iPod touch (4th generation) running firmware version 4.2.1 to iOS 5 or later through iTunes 11.1.5.5 so i have tried to restore iPod twice but still showing only USB cable to be connect to iTunes. Nothing is happening. so please tell me how to resolve it.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4
    Some users have reported as many as 8 or 9 attempts were necessary before success.
    If the issue persists...
    Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...
    Also see your other post >  After updating iOS iPod is showing only iTunes log with USB Cable..

  • I am trying to restore my phone but everyone I go to do it, it goes to Update which takes 2 and a half hours, and everytime it fails. Ive tried four times now. I'm trying to restore because it says my memory is full, when it is not. I'm so frustrated.

    I am trying to restore my phone, but when i go to do it on iTunes, it Updates to 4.3.3 however everytime the 2 and a half hour update finishes, it FAILS. So the update fails, and the restore fails. Its happened 4 ties.
    Im trying to restore my phone, because it says my memory is full when its not and an online solution says to restore. I cant restore because it wont let me update.
    Im so frustrated, i cant take any pictures, download any music or apps, and its really getting me down. Please can someone help.

    This error generally indicates a hardware failure.  Bring the phone to Apple for evaluation.

  • HT201413 i tryed to restore my phone but it turns of during the process and an error happens so what should i do

    i tryed to restore my phone but it turn off during the process and an error happens so should i do ?

    Hello there, VladlsSwag.
    The following Knowledge Base article provides some steps for troubleshooting your issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Particularly:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Recently got a new computer and downloaded iTunes.  All of my music has downloaded from the cloud witht the exception of one song.  I have tried transferring from my phone, but it won't work.  How do I get it back without having to download again?

    Recently got a new computer and downloaded iTunes.  All of my music has downloaded from the cloud witht the exception of one song.  I have tried transferring from my phone, but it won't work.  How do I get it back without having to download again?
    Thanks.

    If you do not have access to the iTunes Library on your Old computer... or its Backup...
    See these 2 Links...
    Syncing to a New Computer...
    https://discussions.apple.com/docs/DOC-3141
    Recovering your iTunes library from your iPod or iOS device
    https://discussions.apple.com/docs/DOC-3991
    If you do have access... See Here...
    iTunes: How to move your music to a new computer
    Or...
    From your OLD computer...
    Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
    Full Details Here  >  http://support.apple.com/kb/HT1751
    An Added Bonus is that you will have a Backup of iTunes.

  • I have tried to restore my iphone but all i get is error 1015 anyone help please

    i have tried to restore my iphone 3 but all i get is error 1015

    http://support.apple.com/kb/TS3694#error1015
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

Maybe you are looking for

  • How to find all values from Minimum to Maximum?

    Post Author: newcruser CA Forum: Formula @Minimum DatePart("h",(Minimum ())) @Maximum DatePart("h",(Maximum()))

  • How to get rid of the Login page in Portal?

    Hi Guys, I have a newly developed intranet portal project for my company which does not need login no more. I hope you can help me how to get rid of the login page in portal which is I know in every application you create, there should be a login. Is

  • How to upgrade tracks from NetWeaver 7.0 to 7.3?

    Hello! I'm trying to create a Web dynpro 7.3 track from a 7.0 track. It's for a sandbox install of 7.3 so I don't want to change the current track or SC but I want to include all my developed code for testing purposes. I've read about track migration

  • Maximize and minimize an application

    Hello, I`m trying to make an application and i need to be able to maximize and minimize other applications too. For example minimize and maximize Firefox. Could you provide me with an example how can i control other applications and minimize/maximize

  • How to write Decode ?

    Hi All, please tell me how to write below statement in using decode statement in a single query. if A1 IS NULL and A2 IS NOT NULL then C := 'NA'; elsifF A1 IS NULL AND A2 IS NULL then C:='Success'; end if; Regards, Subir