HT2506 Suddenly Preview no longer saves altered images. Once you crop or adjust you image it no longer saves it jpg or any format. What's going on?

Preview was working fine then suddenly download images in any format could no longer be saved once I cropped or re-adjusted the image. All that appears on the desk top after saving (no matter what format, jpg, tiff etc.) is a blank.
Preview used to be a handy piece of software for quick editing. can't find any solutions right now.

Step one is to log into a newly created admin user account and see if the problem persists. If not, log back into the orignal account, remove the Preview plist file from your stupidly hidden users/Libarary/Preferencee/ directory, and relaunch Preview.

Similar Messages

When I use Preview,Photo Mechanic and Pages, all JPEG or RAW images appear corrupted. I thought my hard drive was failing and replaced it and migrated everything over but the problem still exists. Any idea what is going on?

When I use Preview,Photo Mechanic and Pages, all JPEG or RAW images appear corrupted.
I thought my hard drive was failing and replaced it and migrated everything over but the problem still exists.
It felt as if maybe a virus was at work but I ran Sophos and found nothing.
I store images on my Drobo Raid system but when I work from my Macbook Pro I have no issues, just on the tower.
Any idea what is going on?

First of all, why did you say yes to Nero Back up before researching what it does with files already on the HDD? When I install Nero, the Back Up is the first thing I disable, it is a nagging pain, there are much better backup programs available. There are several file recovery programs out there to recover deleted files, that is, if that is what happened. Also, if you haven't overwritten the files, so you should be able to find them.

TS3991 I am working on an article of over 7000 words... suddenly, Page, says that document cannot be updated and opened... I lost valuable time and text in the process! What is going on here?

I am working on an article of over 7000 words... suddenly, Page, says that document cannot be updated and opened... I lost valuable time and text in the process! What is going on here?

Pages used to make backups... It does no longer... I cannot even revert to a previous version not being able to open the document that I was still working on half an hour ago. Thank heavens, I made a copy by selecting all text and copying it into an email when the problem first occurred yesterday evening. I am now working on it as an email. I can't risk loosing text this way anymore thru Pages. This is very bad. I am truly disappointed by this... particularly having moved from MS Office to iWorks!

After doing a Google search, I click on a link and go to the searched web page. When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out". Any idea what is going on with the browser?

After doing a Google search, I click on a link and go to the searched web page. When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out". Any idea what is going on with the browser?

Type '''about:config''' in the Location (address) bar and press the "Enter" key. When you see a warning, click '''I'll be careful, I promise!''' button.
* Preferences that have been modified are shown as '''bold (user set)'''.
* Preferences can be '''Reset to the default''' or changed via the right-click context menu.
-> In the '''Filter bar''', type '''browser.sessionhistory.max_entries'''
* Right click the preference '''browser.sessionhistory.max_entries''' and click '''Modify'''
* Change value from 0 to whatever you want over 0 (Default value is 50)
* click OK
-> Close the '''about:config''' tab and then Restart Firefox.
See this post:
* https://support.mozilla.com/en-US/questions/860894#answer-229574
Check and tell if its working.

When I'm browsing on Safari, it all of a sudden cuts off and the screen turns blue. It turns blue for about 5 seconds and then returns to the desktop screen. Any idea what's going on?

When I'm browsing on Safari, it all of a sudden cuts off and the screen turns blue. It turns blue for about 5 seconds and then returns to the desktop screen. Any idea what's going on?

Anna...
Could be the graphics card.
Run the Apple Hardware Test

All of a sudden can no longer watch YouTube vids....What's up?

Within the last several days, more and more videos which I have saved to my Ipad2 watch list, and have viewed many times, have now refused to play. I keep getting "This video is not available on this device." At first I thought it was maybe some newer vids that I had added to the watch list but not viewed yet, but as I checked more and more of the ones I know I've watched, I realized that it is affecting most videos, if not all of them. BTW, I've been using the full YouTube site, not the mobile version (which I'm not really interested in using).
So, what the heck has happened to screw up my ability to view YouTube vids all of a sudden?? And don't tell me to use some other browser...it all was working fine until the past few days with Safari and PC YouTube site. So what the heck has gone kablooie ??

I won't tell you to use another browser. I will tell you that a few people have talked about this very same issue in the past few days and nobody seems to have a clue why that is happening.
I can't remember the exact discussions but you can do a search in the upper right corner of this site to see if you can find those discussions and see if anybody was able to figure it out.

Excel 2013 save as JPG/PNG graphic format?

Dear All,
For Excel 2013, is it possibe to save the sheet in JPG or PNG graphic file?

Hi,
Currently, Excel 2013 doesn't have the ability to save a sheet as an image.
The simplest way to accomplish this is to select and copy the worksheet cells containing the data, chart, etc. you want to save as an image (turn off grid lines if you don’t want them too), then paste it into your graphics editor, say Microsoft Paint.
Now you will be able to save it as any graphic formats as you want by using
Save as feature in Microsoft Paint.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Changing date (and sequence) of events by changing dates of photos no longer seems to work. Any idea what to do?

I am scanning in old slides and negatives (from the 1960s and 70s), and I want to get the resulting "events" in sequence from when the photos were taken, rather than when they were scanned. So I have been changing the dates of the photos, and previously this resulted in the associated event moving to the proper sequence. This definitely worked a month or so ago, both with prints scanned in on a flat-bed scanner, and also with slides and negatives scanned with a Veho scanner. That was faulty, however, and so it has been replaced with a Plustek 7500i scanner, using SilverFast scanning software, and importing the resulting images into iPhoto. I have recently tried to change the dates of the resulting events, and it doesn't seem to work as it used to. There has been an update to iPhoto 9.1.3 since my earlier success.
Take for example one event, CS73A. Hovering over the event in the "All events" display gives dates of 1 Apr 2011 to 2 Apr 2011; these are the dates the slides were scanned in. If I open the event and choose the Info tab, it gives the event date as 02/03/1973 (which is the approximate date that I changed it to). I had done a batch change on the event this time, so the date and time on the first slide is 2 March 1973 09:30:48. Each successive slide is 1 minute later, and the last is 2 March 1973 10:08:48 (38 slides). I asked for the dates in the files to be changed as well.
I don't know what I'm doing that's different from before. The only things I can think of are (a) something has changed in the iPhoto update, or (b) the SilverFast software stores the scanning date in some part of the EXIF that iPhoto can read but not change. I don't have tools to examine the EXIF unfortunately.
What to do?

Chris, I have run into the same problem.
Try this:
Open an event with more than one photo in it.
Adjust the date of one or more photos. The event date does not update.
Delete any one photo. The event date now updates to match the above date change.
Undo the delete photo. The event date stays matching.
Change the date of any photo again. The event date updates now every time.
If you close the event and reopen it, you have to start over with the delete one photo thing.
I don't understand it but it works here.
I also have had the problem of events not sorting themselves in order of the dates when VIEW, SORT, BY DATE is selected. This seems to affect only the events were photo date changes had been made. Using the delete thing seems to keep the events in order.
Another funny thing: When I put photos into iMovie the times in iMovie show as 7 hours off the photo time.
I think Apple owes us an update to iLife!

Ni-MAX no longer recognizes NI-5133 or any device if windows goes to sleep

I am running Labview 8.6 and MAX 4.6. There are three devices on the system, all using drivers from NI. They are an Agilent 33220A function generator, NI-5102 scope/digitizer and a NI-5133 scope/digitizer. The NI-5102 is PCMCIA and th NI-5133 is usb. The Agilent is also connected via USB. When the computer first boots up, NIMaX recognizes all the devices and they are all accessible via Labview. However, if the computer goes to sleep and wakes up, NIMAX no longer recogizes the devices. I either get an error message that NIDAQmx timed out or that the database is corrupted. the funny thing is that it only affects the NI-5133 which is now not accessible via labview. Labview programs can still communicate with the function generator and the 5102 scope.

Hi, Mark.
It seems as if you have a MAX Database Corruption error. Go through the steps provided in this Knowledgebase article. If removing the MAX Database Corruption error does not work for you, respond to this post, and I will do my best to find a solution for you.
I hope you're having a great day!
Regards,
Sara Lewandroski
Applications Engineer | National Instruments
http://www.ni.com/support

HT1551 When use AirPlay to watch hbo go from my iPad on through my tv using Apple TV suddenly it stops and I get an error message that it needs to be played back using hdcp something or other. Then I can't get it to come back on. Any ideas what is going

When I use airplay to watch hbo go through Apple TV it starts running. However for no apparent reason it will suddenly stop and the error message that I need hdcp something comes on and then I cannot continue watching it. It is so random happening after 40 min of viewing or 15 min or sometimes not letting it start at all. Support topics are no help. Any ideas?

When I use airplay to watch hbo go through Apple TV it starts running. However for no apparent reason it will suddenly stop and the error message that I need hdcp something comes on and then I cannot continue watching it. It is so random happening after 40 min of viewing or 15 min or sometimes not letting it start at all. Support topics are no help. Any ideas?

New tabs suddenly begin to open with "wleTab" in the URL bar , and the only way to stop them seems to be restarting Firefox. What's going on?

This doesn't happen completely spontaneously, but, rather, when I'm right-clicking highlighted text either to open it as a link or use the Context Search extension to search for the text on another website. It also doesn't ALWAYS happen--just frequently enough to be really annoying.

This doesn't happen completely spontaneously, but, rather, when I'm right-clicking highlighted text either to open it as a link or use the Context Search extension to search for the text on another website. It also doesn't ALWAYS happen--just frequently enough to be really annoying.

Filter previews don't match regular image display

I'm tearing my hair out trying to figure this out. I'm working on a new computer (MacBook Pro, running 10.5.5) and all my filter previews are more saturated than the image is "normally" in Photoshop. This is true for:
- Tiffen DFX
- Photoshop's built in "Spatter" filter (and other filters as well)
- PictureCode NoiseNinja Pro
- Mr. Retro Machine Wash 3
I have another Mac (Dual-core G5 running 10.4.11) which does NOT exhibit this problem.
As far as I can tell everything is the same between the two machines:
- Color Settings: North America General Purpose 2 (synced via Bridge)
- "Proof Colors" disabled
- Same image on both machines
- Same PHOTOSHOP on both machines (same copy installed on my home machine and laptop)
- Both monitors (external on the MacBook Pro) calibrated using Monaco Optix XR.
Any ideas what's going on?

>Sorry, but that is plain BS
Let's try to be a bit less flamey, shall we?
>For starters, in order to use the laptop's keyboard, the external monitor has to be way too high, or the laptop/keyboard way too low, since the darned laptop screen gets in the way.
True, but when using an external monitor (in the office) I also have my external keyboard and mouse. The laptop is on the left and behind, sitting on a riser so the bottoms of both screens are at the same level. External display is on the right. Both angled slightly inward towards me. The laptop overhangs the front of the riser (and the external keyboard) so the display is not too far away.
>Secondly, your scheme underscores the futility of using a laptop and takes away any portability advantage you may have had.
I don't see that. The screen IS profiled, just not as well as the external screen. It's plenty adequate for sorting/filtering shoots and preliminary editing, with more serious color correction, output sharpening, et. handled when back at the office.
>Third, you won't be generating much income doing photography or Photoshop work on a lousy laptop screen "in the islands", or at least not for long. You may have earned your vacation, but the laptop sure isn't going to "pay for it". You may permanently lose some clients instead.
I'll have to tell my clients that one. I'm sure they'll find it worth a chuckle. True the last trip was mostly spent coding and working in Flash, and the more critical Photoshop work I did needed a modest tweak once I got back to the good monitor, but it was pretty close and easy to fix. Technically I suppose working on a trip doesn't mean the trip is paying for itself, but rather than bleeding twice (traveling AND not working for a week) I'm only bleeding once. And I happen to enjoy work, so it's not a vacation killer.
> I stand by my fundamental aversion to laptops.
And I by my attraction to them.

Why do my layers disappear when I save a .jpg?

Photoshop has learned a new trick in my office today:
I arrange all of my text and layers the way I want them, get all ready to save and my group of layers becomes invisible. This is odd. They are all set to be visible in the layers window, soI select the group, use the move tool to wiggle them and they reappear. I put them back where they belong, all is good, I save my .jpg and the layers are not visible when I open the .jpg. They are, however, visible in the thumbnail version of the image in Windows Explorer. I go back to Photoshop and the layers are invisible again in spite of being set to visible.
I am at a loss. I have never experienced this before. I thought maybe it was my video card screwing up so I restarted my computer and the problem is still there. Has anyone experienced this before?

Maybe this will help. This is a screenshot of what I am talking about. All of the layers that I have circled in red should have a picture of a TV, some text, shapes, etc. All are marked as visible yet I can't see them.They are not off the drawing board, nor are they under the background. If I select the containing group and move it, they become visible again.
This is directly after trying to save a .jpg.
This is what it looks like when I try to view my .jpgs in Windows. This is the filmstrip view. When I open the .jpg in Windows Picture Viewer, all I get is the background image like the one here but if you look at the thumbnail, you can see what it is supposed to look like. I have never seen this happen before in 2 years of working with Photoshop.
Any help or direction with this would be greatly appreciated, I am at a loss as to what could be causing this.

How to save a invoice in Word Format

Dear Sd Gurus
Please tell how to save a invoice in any format like word format other than the printed stationery .This saved document will be used for mailing to the customer.
No interface with internet or EDI .
Hope for a reply soon
Satish Kullu

Hi Satish,
First, your SAP system must be configure by the basis people in order for you to send an external mail.
Whether it can send pdf or other file format will depends on the Mail Server you are using.
The basis people must also maintain the conversion parameters so that SAP knows how to convert the billing documents to be send as a pdf file or other desired format specified by your company.
Finally, you have define the IMG in Maintain Output Determination for Billing Documents (Output type MAIL)
Reward points if this helps.
Regards
Karan

How to save layout with ALV Pivot format

Hi
In ALV report I have 25 fields but I want to use 10 fields out of 25 fields in Pivot Table. My problem is how to save this layout with Pivot format for on going use. At every time execution of report I need not required to set Pivot Table.
Please help me.
-Sanjay

Hi,
Are you using FM REUSE_ALV_GRID_DISPLAY? If yes, then pass 'X' to the parameter I_SAVE while calling the fm.
if you are using Object Oriented ALV, then call the below method before calling the method for display
DATA : gr_layout TYPE REF TO cl_salv_layout,
       gr_layout_key TYPE salv_s_layout_key.
CALL METHOD gr_functions->set_all
EXPORTING
    value = IF_SALV_C_BOOL_SAP=>TRUE.
MOVE sy-repid TO gr_layout_key-report.
CALL METHOD gr_table->get_layout
    RECEIVING
      value = gr_layout.
CALL METHOD gr_layout->set_key
    EXPORTING
      value = gr_layout_key.
CALL METHOD gr_layout->set_save_restriction
    EXPORTING
      value = if_salv_c_layout=>restrict_none.
CALL METHOD gr_layout->set_default
    EXPORTING
      value = if_salv_c_bool_sap=>true.
Regards
Vinod
Edited by: Vinod Kumar on Jul 2, 2010 3:40 PM
Edited by: Vinod Kumar on Jul 2, 2010 4:43 PM

HT2506 Suddenly Preview no longer saves altered images. Once you crop or adjust you image it no longer saves it jpg or any format. What's going on?

Similar Messages

Maybe you are looking for