HT3275 My backup disk won't mount on my desktop. The preferences window says it is not available. I am runng Lion on a late 2007 Macbook.

My external backup disk will not show up on my desktop anymore. Always did before. Using WD external backup disk.Any suggestions?

Try power cycling the entire network
That means powering off every device in any order that you want
Wait a few minutes
Start the modem first and let it run 2-3 minutes
Start the next device connected to the modem next, and let it run a full minute
Keep starting devices one at a time about a minute apart until the entire network is back up
Check the network for proper operation

Similar Messages

My time machine keeps saying the backup disk cannot be mounted. how do I fix it?

my time machine keeps saying that the backup disk cannot be mounted. we cannot figure out why this is happening. We have a 500GB time capsule /wireless router and using a Macbook . any ideas?

Try deleting your iPod Photo Cache folder. See:
http://support.apple.com/kb/ts1314

Backup disk couldn't mount

Hi there!
I'm one of those happy Apple users that's having huge issues with Time Capsule. I've tried just about everything, but before I disconnect it completely, I wanted to shout out a question to see if anyone's got anything to advise.
I had the restart problem and Apple's support line helped me out with this, but what happened next was that it keeps Preparing back-up forever and then I get this error message: Backup disk couldn't mount.
Being a above average skilled user, but useless at more technical issues, I have no idea what this means and what I can do to fix it. I've tried some different advice given in the forums and I've also tried to contact Apple, resulting in nothing but silence from their part.
Anyone recognize this problem?
Thanks!

I had the same problem and found out how to fix it
You can check the whole process here in a post I wrote for the Hardmac blog (it's rather long...):
How I saved my corrupted Time Machine sparsebundle image…

DVD-Ram disks won't mount on Dual 450 - help!

I've got a particular and pressing problem. I'm an audio engineer among other things. I have a lot of files archived temporarily on DVD-Ram disks from my old Dual 450. I have to retrieve some files pronto but suddenly the DVD-Ram disk won't mount. The drive spits out the disk as soon as I insert it. It will mount CDs but not these DVD-Ram disks. Please help. I need to back these up off of thse old disks. But more urgently I have pending sessions that require I get some files from these disks. This happens both under OS 9.1 and 10.2.8 the last revisions of this computer I did. But it used to work until a year or so ago.
I have so far repaired permissions, used Disk Warrior and sprayed around the dusty drive with compressed air. It seems that perhapos a mechanism is loose springing the disk out when it's not immediately recognized as a CD or DVD-R.
Help!

Probably your best bet is to dismantle the drive and try manually cleaning the lenses, which has made a difference for some users.
Other option is to replace the drive with a new one capable of reading (but not necessarily writing) DVD-RAM media. LG-4163B is one such drive, Pioneer DVR-110 can also read DVD-RAM. These drives are under $40 online in the US.

HT3275 Has anyone come across the red "i" message saying "The backup disk image "/Volumes/Chris...(the last bit being) iMac.sparsebundle" is already in use? This has prevented my time machine from backing up from this morning (5th Dec 2012).

Has anyone come across the red "i" message saying "The backup disk image "/Volumes/Chris...(the last bit being) iMac.sparsebundle" is already in use."?
As of yesterday (4th Dec 2012) everything was fine, no trouble or problems at all. Wake up this morning, turn on the computer and when it came time to backup itself, the message occurred above and this has prevented my time machine from backing up from this morning (5th Dec 2012) ever since then.
Everything on my computer is up-to-date but this problem still persists displaying this message practically every hour, on the hour and nothing is getting backedup!
If you know what is going on and more importantly, how to fix this, I would be indebted to you for sharing your knowledge with me on this subject.
Thank you.

Welcome to the Apple Support Communities
See > http://pondini.org/TM/C12.html

Dreamweaver CS6: Installation disk won't allow a change in the location of the installation folder

First, I hope the moderators will cut me some slack for making a duplicate posting. The comments below were posted in the "Creative Suites" community. I just noticed that there is a "Dreamweaver" community. I feel the issues I've raised below are more relevant to the latter.
I recently purchased a Dreamweaver CS6 installation disk and have a valid registration code. The Adobe website has recognized this code as valid.
I started-out by having the installation disk install into a folder on a high capacity (0.5 tb) external drive. This was done while my Gateway PC was still working properly. I did a duplicate installation onto this hard drive (into a separate folder) to accommodate any work I wanted to do on a Dell laptop I also own. For a few days things seemed to work ok on both computers. Then the cursor on my Gateway stopped moving. Several changes of mice failed to resolve the problem. I've written-off my Gateway as "dead." However the Dreamweaver CS6 installation MAY (I can't remember) be on a "local" folder on my Gateway and I am concerned I will have trouble installing Dreamweaver on the replacement I've purchased. I understand one is limited to 2 installations. If needed, can I purchase a license for a third installation? And what might that cost?
After turning-off my Gateway I then went to my Dell laptop to try to work with Dreamweaver there. I felt it was best to install on a "local" folder so I deleted all the Dreamweaver software from the folders on my external drive. Unfortunately the installation disk is still "pointed" to the folders on my external drive. To make matters worse I am now getting an error message which indicates I need to install into a folder on the "local" drive of my Dell laptop. But the installation disk won't allow me to change the path. On the installation disk the "path" to my external drive is faded-out and it will not allow me to delete and type-in a new path.
I've spent what, to me, are big bucks on this Dreamweaver disk. It's the only website building software that seemed to get consistently good reviews. However, for me, Dreamweaver is becoming a nightmare! I'm very much of a novice at website building. I don't know how, in the world, I will be able to a) Create something, and then b) Get Dreamweaver to put it onto what is now a blank webpage. I recently got "Dreamweaver CS6 The Missing Manual" and "Dreamweaver CS6 For Dummies." So far I haven't been able to find anything, in either of these two books, which addresses the issues I've raised here.
Somebody--please help!!
Don't know if my screen name will show up. So my name is JACK, near Old Faithfull.

Have you tried calling Adobe Customer service? They can deactivate one of your installations so that you can install and run on a new system. And perhaps they can help with your other problem, or send you to a tech support rep who can.
With regard to your use of DW, I'd strongly suggest that you take advantage of this downtime by learning as much HTML and CSS as you can absorb. Multiple sittings would be helpful. The more you know about those two, the easier DW will be for you when you eventually get it going.
Here are some tutorial sites that may be helpful -
http://www.w3schools.com
http://www.html.net

HT4718 I had a copy of Mountain Lion on my late 2008 MacBook Pro, having replaced Lion which it came with. But the drive,crashed, so I replaced the drive and reinstalled Lion from the original disks I had. How do I get another copy of Mountain Lion?

I had a copy of Mountain Lion on my late 2008 MacBook Pro, having replaced Lion which it came with. But the drive crashed, so I replaced the drive and reinstalled Lion from the original disks I had. How do I get another copy of Mountain Lion?

A 2008 Mac won't have originally shipped with Lion. You need to install 10.6.8 on the computer, log into the Mac App Store with the Apple ID you used to purchase Mountain Lion, click on the Purchases tab, and download it.
(121465)

Late 2007 Macbook and Leopard Disk

Hi,
Im trying to install Leopard on a late 2007 Macbook. I am using a original Leopard disk as I do not have copies of the original system disks to hand.
I assume this is because the Macbook shipped after Leopard and my leopard disk doesn't have the required drivers.
Does anyone know a work around?

You cannot use the install disks which came with another computer (if that is in fact what you are doing); you have to use a retail Leopard install set.

HT1349 Win 7 64 bit: iTunes won't install, get error code 2324 or installer says I am not logged on as administrator: only one user and it is an administrator user.

Win 7 64 bit: iTunes won't install, get error code 2324 or installer says I am not logged on as administrator: only one user and it is an administrator user.

Hey there k8ei,
Thank you for using Apple Support Communities
I found this article for you to help troubleshoot installing iTunes named Trouble installing iTunes or QuickTime for Windows found here http://support.apple.com/kb/HT1926.
Here is a general overview on where the troubleshooting will take you:
General installation troubleshooting
1. Empty your Temp directory and restart
2. Completely remove iTunes and related components
3. Install the latest version of iTunes
Additional troubleshooting
After performing each of the steps below, you will need to completely remove iTunes and related components and then install iTunes again to determine whether the issue is resolved.
1. Make sure you have administrator account access
2. Make sure your folder names don't contain strange characters
3. Get the latest Windows updates
4. Disable other conflicting software
All the very best,
Sterling

Whenever I try to log in to my Gmail account, the page redirects for a loooong time, then says that it won't load properly, and that the problem may be caused by not enabling cookies, but I have them enabled. Any idea what the problem might really be?

Whenever I try to log in to my Gmail account, the page redirects for a loooong time, then says that it won't load properly, and that the problem may be caused by not enabling cookies, but I have them enabled. Any idea what the problem might really be?

I did think about that and if I have to I will do that, however there are about 50 songs. I have closed and reopened iTunes several times and I am sure that I have the latest version. It fails right away but I can click on the cloud download icon and download the song that it failed on ... therefore it is not that song "or any one song" causing the issue. Any ideas?

I'm running Lion on a Late 2008 MacBook Air. With no other applications running, I can no longer Check for Software Updates. It gets abut half way through the checking process and then freezes. The MBA passes Disk Utility. Thoughts?

I'm running Lion on a Late 2008 MacBook Air.
With no other applications running, I can no longer Check for Software Updates. It gets about half way through the checking process and then freezes.
The MBA passes Disk Utility. Thoughts?
Thanks
Jim Taylor

How long do you leave it?
Mine can sometimes sit for quite a while (maybe 10 minutes??) before it finally finishes.
You could look at the relevant logs via Console (Utilities folder) to see if Software Update is complaining about anything.
charlie

I downloaded itunes to my hp, but it won't let me sign into the store and sometimes it will not recognize my tunes

I downloaded itunes to my hp, but it won't let me sign into the store and sometimes it will not recognize my tunes

Hi milpo!
Here is an article that will help you troubleshoot your connection to the iTunes Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

DMG backup image won't mount

name-lt.dmg won't mount and says "File too large" as the warning error. I used Disk Utility to make this compressed image for backup purposes and now I'm afraid I won't be able to open it. A friend told me to use HexEdit to edit headers on the image. Does anyone have any advice? It's a 125gb backup image. All other images I have made will mount and work fine.

The image was taken using my iMac (10.9) connected with a firewire to a macbookpro running 10.7.5

TIME MACHINE EXTERNAL DRIVE BACKUP DISK CANNOT BE MOUNTED

Hello,
Last week i brought a WD MY BOOK LIVE NETWORK DRIVE.
I hv 2 Windows PC and 1 MACBOOK. All data residing on these 3 computers i intend to back up.
One Windows PC i was able to successfully connect, 2nd Windows PC not yet connected.
Macbook connected on teh first day of WD installation. After that day it gives an error "THE BACKUP DISK IMAGE COULD NOT BE MOUNTED".
I hv tried various methods to rectify this error as discussed in many forums, but none seem to be helping.
Can anyone suggest how should i solve this.
I called WD, they told me to call APPLE as its a time machine problem.
I call APPLE and they are asking me to call WD.
i AM USING MACBOOK - MAC OSX VERSION 10.5.8

My book world
Check here
http://wdc.custhelp.com/app/answers/detail/a_id/8422/p/247,264/c/0
I just solve the problem after 45 minutes with the lervel 3 WD support. You have to return to firmware 1.02.06 since the 1.02.10 version has a network card driver error and in some configurations (a lot more) the disk just stay connected for a couple of minutes. To do that you have to manually return to old firmware but WD do not has the file as public so you have to call them. One way to stay connected a bit more is making a permanent ping to the disk.

USB disk won't mount on startup (have tried everything)

Hi!
I'm having big problems getting my USB disk to mount on startup.:(
It used to work perfectly by having 'mount /dev/sdc1 /media/disk' in rc.local (and umount in local.shutdown) but recently it started saying that 'filesystem type must be defined' (or something like that). So I changed the line to 'mount -t ext3 /dev/sdc1 /media/disk' but now I get a message that '/dev/sdc1 does not exist'.
So I decided to get this fixed in fstab once and for all.
I checked the designations of the disks with 'fdisk -l' and noticed that the USB disk would alternate between /dev/sdc, /dev/sde and /dev/sdd quite random on every reboot. In other words I couldn't mount it in fstab by using one of those paths cause I'd get the same problem with '/dev/sdc or -e or -d does not exist'. I figured the sollution must be to mount the disk by using UUID. I checked the uuid's and got the following (as you can see the USB disk is on this reboot registered as '/dev/sde'):
bash-3.2$ ls -l /dev/disk/by-uuid/
total 0
lrwxrwxrwx 1 root root 10 2009-02-07 11:56 6cf5e803-429a-44c3-bcf9-0f007df623f3 -> ../../sda1
lrwxrwxrwx 1 root root 10 2009-02-07 11:56 8ef6be20-ee30-4a00-8946-56a4d94a7245 -> ../../sda3
lrwxrwxrwx 1 root root 10 2009-02-07 11:56 947b3b86-8501-4011-9da2-4de45eb4ed60 -> ../../sda2
lrwxrwxrwx 1 root root 10 2009-02-07 11:56 94911fb3-def7-4440-b6a5-5e09f91b19f6 -> ../../sde1
lrwxrwxrwx 1 root root 10 2009-02-07 11:56 acd197d3-f63e-48f9-88de-41eff1b3b425 -> ../../sda4
lrwxrwxrwx 1 root root 10 2009-02-07 11:56 b6745703-bde6-44ef-865d-d09501ecc8ab -> ../../sdb1
I other words the UUID of the disk should be '94911fb3-def7-4440-b6a5-5e09f91b19f6' so I added that to the fstab file, but I still get the same error that the disk doesn't exist. How is this possible? Isn't the UUID supposed to be the same no matter what? When the disk is clearly labeled with this UUID every time I check it why can't it be used in fstab??
Here's my fstab (I've commented out the lines that I've been trying out):
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /mnt/cdrom iso9660 ro,user,noauto,unhide 0 0
/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0
/dev/sda1 /boot ext2 defaults 0 1
/dev/sda2 / ext3 defaults 0 1
/dev/sda3 /var reiserfs defaults 0 1
/dev/sda4 /home ext3 defaults 0 1
/dev/sdb1 /extra ext3 defaults 0 1
#/dev/sdc1 /media/disk defaults 0 0
#UUID=94911fb3-def7-4440-b6a5-5e09f91b19f6 /media/disk defaults 0 0
What am I doing wrong here? I've also tried to use different options like 'rw,auto,exec' but it won't work.

It seems I'm able to mount the disk from the terminal by doing '# sudo mount UUID=94911fb3-def7-4440-b6a5-5e09f91b19f6 /media/disk'.
But this only works when I do it manually. Adding 'mount UUID=94911fb3-def7-4440-b6a5-5e09f91b19f6 /media/disk' to rc.local only gives the error that filesystem must be defined and when it's defined I get the error that device is not found.
How can it work manually, but not in fstab or rc.local?
Here's my dmesg:
BIOS EBDA/lowmem at: 0009f800/0009f400
Linux version 2.6.28-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Mon Feb 2 22:22:59 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.4 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0x7fef0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f400 (usable)
modified: 000000000009f400 - 00000000000a0000 (reserved)
modified: 00000000000f0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007fef0000 (usable)
modified: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
modified: 000000007fef3000 - 000000007ff00000 (ACPI data)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000fec00000 - 0000000100000000 (reserved)
kernel direct mapping tables up to 377fe000 @ 10000-16000
RAMDISK: 7fe0e000 - 7fedf2e4
Allocated new RAMDISK: 0055f000 - 006302e4
Move RAMDISK from 000000007fe0e000 - 000000007fedf2e3 to 0055f000 - 006302e3
ACPI: RSDP 000F8600, 0014 (r0 HP-CPC)
ACPI: RSDT 7FEF3040, 0038 (r1 HP-CPC AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 7FEF30C0, 0084 (r2 HP-CPC AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 7FEF31C0, 3C55 (r1 HP-CPC AWRDACPI 1000 MSFT 100000E)
ACPI: FACS 7FEF0000, 0040
ACPI: SSDT 7FEF6F40, 01CA (r1 HP-CPC POWERNOW 1 LTP 1)
ACPI: SRAT 7FEF7180, 00A0 (r1 HP-CPC HAMMER 1 AMD 1)
ACPI: MCFG 7FEF7280, 003C (r1 HP-CPC AWRDACPI 42302E31 AWRD 0)
ACPI: APIC 7FEF6E80, 0068 (r1 HP-CPC AWRDACPI 42302E31 AWRD 0)
ACPI: Local APIC address 0xfee00000
1158MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00012000 - 00018f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 000055b520] TEXT DATA BSS ==> [0000100000 - 000055b520]
#4 [000055c000 - 000055f000] INIT_PG_TABLE ==> [000055c000 - 000055f000]
#5 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [000055f000 - 00006302e4] NEW RAMDISK ==> [000055f000 - 00006302e4]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
found SMP MP-table at [c00f46e0] 000f46e0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007fef0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007fef0
On node 0 totalpages: 523903
free_area_init_node: node 0, pgdat c0406600, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2318 pages used for memmap
HighMem zone: 294372 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
SB4X0 revision 0x11
Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
PERCPU: Allocating 36864 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519809
Kernel command line: root=/dev/sda2 ro quiet
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 2188.552 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Scanning for low memory corruption every 60 seconds
Memory: 2072040k/2096064k available (2227k kernel code, 22632k reserved, 1026k data, 332k init, 1186760k highmem)
virtual kernel memory layout:
fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc0433000 - 0xc0486000 ( 332 kB)
.data : 0xc032cfd9 - 0xc042db5c (1026 kB)
.text : 0xc0100000 - 0xc032cfd9 (2227 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 4378.48 BogoMIPS (lpj=7295173)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080926
ACPI: Checking initramfs for custom DSDT
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4379.66 BogoMIPS (lpj=7295468)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
Brought up 2 CPUs
Total of 2 processors activated (8757.15 BogoMIPS).
net_namespace: 768 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 18 io port: [0x4100-0x411f]
pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:12.0: reg 10 io port: [0xfe00-0xfe07]
pci 0000:00:12.0: reg 14 io port: [0xfd00-0xfd03]
pci 0000:00:12.0: reg 18 io port: [0xfc00-0xfc07]
pci 0000:00:12.0: reg 1c io port: [0xfb00-0xfb03]
pci 0000:00:12.0: reg 20 io port: [0xfa00-0xfa0f]
pci 0000:00:12.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f1ff]
pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x07ffff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff]
pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: reg 10 io port: [0x500-0x50f]
pci 0000:00:14.0: reg 14 32bit mmio: [0xfe02b000-0xfe02b3ff]
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
pci 0000:00:14.1: reg 20 io port: [0xf800-0xf80f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff]
pci 0000:01:00.0: reg 24 io port: [0xef00-0xef7f]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:02.0: bridge io port: [0xe000-0xefff]
pci 0000:00:02.0: bridge 32bit mmio: [0xfa000000-0xfcffffff]
pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:02:01.0: reg 10 io port: [0xdf00-0xdfff]
pci 0000:02:01.0: supports D1 D2
pci 0000:02:03.0: reg 10 io port: [0xde00-0xdeff]
pci 0000:02:03.0: reg 14 32bit mmio: [0xfdeff000-0xfdeff0ff]
pci 0000:02:03.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:02:03.0: supports D1 D2
pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:03.0: PME# disabled
pci 0000:02:04.0: reg 10 32bit mmio: [0xfdefe000-0xfdefe7ff]
pci 0000:02:04.0: reg 14 io port: [0xdd00-0xdd7f]
pci 0000:02:04.0: supports D2
pci 0000:02:04.0: PME# supported from D2 D3hot D3cold
pci 0000:02:04.0: PME# disabled
pci 0000:00:14.4: transparent bridge
pci 0000:00:14.4: bridge io port: [0xd000-0xdfff]
pci 0000:00:14.4: bridge 32bit mmio: [0xfde00000-0xfdefffff]
pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
PCI: Using ACPI for IRQ routing
pci 0000:00:00.0: BAR 3: can't allocate resource
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:09: mem resource (0xf0000-0xf3fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:09: mem resource (0xf4000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:09: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:09: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:09: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:09: mem resource (0x100000-0x7feeffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x228-0x22f has been reserved
system 00:01: ioport range 0x40b-0x40b has been reserved
system 00:01: ioport range 0x4d6-0x4d6 has been reserved
system 00:01: ioport range 0xc00-0xc01 has been reserved
system 00:01: ioport range 0xc14-0xc14 has been reserved
system 00:01: ioport range 0xc50-0xc52 has been reserved
system 00:01: ioport range 0xc6c-0xc6d has been reserved
system 00:01: ioport range 0xc6f-0xc6f has been reserved
system 00:01: ioport range 0xcd4-0xcdf has been reserved
system 00:01: ioport range 0x4000-0x40fe has been reserved
system 00:01: ioport range 0x4210-0x4217 has been reserved
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0x800-0x87f has been reserved
system 00:08: iomem range 0xe0000000-0xefffffff has been reserved
system 00:09: iomem range 0x7ff00000-0x7fffffff has been reserved
system 00:09: iomem range 0x7fef0000-0x7fefffff could not be reserved
system 00:09: iomem range 0xffff0000-0xffffffff has been reserved
system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:09: iomem range 0xfff80000-0xfffeffff has been reserved
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0: IO window: 0xe000-0xefff
pci 0000:00:02.0: MEM window: 0xfa000000-0xfcffffff
pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
pci 0000:00:14.4: IO window: 0xd000-0xdfff
pci 0000:00:14.4: MEM window: 0xfde00000-0xfdefffff
pci 0000:00:14.4: PREFETCH window: 0x000000fdd00000-0x000000fddfffff
pci 0000:00:02.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 io port: [0xe000-0xefff]
bus: 01 index 1 mmio: [0xfa000000-0xfcffffff]
bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 io port: [0xd000-0xdfff]
bus: 02 index 1 mmio: [0xfde00000-0xfdefffff]
bus: 02 index 2 mmio: [0xfdd00000-0xfddfffff]
bus: 02 index 3 io port: [0x00-0xffff]
bus: 02 index 4 mmio: [0x000000-0xffffffff]
NET: Registered protocol family 2
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 836k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1732
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: MSI quirk detected; MSI disabled
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:02.0: setting latency timer to 64
pcieport-driver 0000:00:02.0: found MSI capability
pci_express 0000:00:02.0:pcie00: allocate port service
pci_express 0000:00:02.0:pcie01: allocate port service
pci_express 0000:00:02.0:pcie03: allocate port service
aer 0000:00:02.0:pcie01: AER service couldn't init device: no _OSC support
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /class/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 332k freed
SCSI subsystem initialized
libata version 3.00 loaded.
pata_acpi 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf800 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf808 irq 15
ata2.00: ATAPI: HP DVD Writer 740b, ED24, max UDMA/33
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM HP DVD Writer 740b ED24 PQ: 0 ANSI: 5
sata_sil 0000:00:12.0: version 2.3
scsi2 : sata_sil
scsi3 : sata_sil
ata3: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 22
ata4: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 22
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/100
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-7: WDC WD2500JS-60MHB1, 10.02E01, max UDMA/100
ata4.00: 488397168 sectors, multi 16: LBA48
ata4.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA WDC WD2500JS-60M 10.0 PQ: 0 ANSI: 5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02c000
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02e000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02d000
sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
sd 3:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI disk
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
usb 1-7: new high speed USB device using ehci_hcd and address 5
usb 1-7: configuration #1 chosen from 1 choice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram
usb 2-2: new low speed USB device using ohci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
8139too Fast Ethernet driver 0.9.28
8139too 0000:02:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
eth0: RealTek RTL8139 at 0xf8182000, 00:13:d3:88:fb:ec, IRQ 20
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
lirc_dev: IR Remote Control driver registered, major 61
lirc_mceusb2: Philips eHome USB IR Transceiver and Microsoft MCE 2005 Remote Control driver for LIRC $Revision: 1.44 $
lirc_mceusb2: Daniel Melander <[email protected]>, Martin Blatter <[email protected]>
usbcore: registered new interface driver lirc_mceusb2
usb 3-1: new full speed USB device using ohci_hcd and address 2
C-Media PCI 0000:02:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
usb 3-1: configuration #1 chosen from 1 choice
input: Power Button (FF) as /class/input/input1
usb 3-1: reset full speed USB device using ohci_hcd and address 2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
lirc_dev: lirc_register_plugin: sample_rate: 0
lirc_mceusb2[2]: Philips eHome Infrared Transceiver on usb3:2
usb 3-2: new low speed USB device using ohci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
usb 3-4: new full speed USB device using ohci_hcd and address 4
usb 3-4: configuration #1 chosen from 1 choice
Linux agpgart interface v0.103
usbcore: registered new interface driver hiddev
scsi 1:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: Attached scsi generic sg2 type 0
input: Logitech HID compliant keyboard as /class/input/input3
generic-usb 0003:046D:C30E.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:13.0-2/input0
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
input: Logitech HID compliant keyboard as /class/input/input4
generic-usb 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:13.0-2/input1
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input5
generic-usb 0003:045E:0047.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.1-2/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nvidia: module license 'NVIDIA' taints kernel.
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x500, revision 0
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
input: PC Speaker as /class/input/input6
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
scsi5 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
ohci1394 0000:02:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fdefe000-fdefe7ff] Max Packet=[2048] IR/IT contexts=[4/8]
Error: Driver 'pcspkr' is already registered, aborting...
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 180.22 Tue Jan 6 09:29:08 PST 2009
EXT3 FS on sda2, internal journal
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000bc42b8]
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
scsi 5:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
sd 5:0:0:0: [sdc] Attached SCSI removable disk
sd 5:0:0:0: Attached scsi generic sg3 type 0
scsi 5:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 4:0:0:0: Direct-Access ST316002 3A 8.01 PQ: 0 ANSI: 0
sd 5:0:0:1: [sdd] Attached SCSI removable disk
sd 5:0:0:1: Attached scsi generic sg4 type 0
scsi 5:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
sd 4:0:0:0: [sde] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sde] Assuming drive cache: write through
sd 4:0:0:0: [sde] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sde] Assuming drive cache: write through
sde: sde1
sd 4:0:0:0: [sde] Attached SCSI disk
sd 4:0:0:0: Attached scsi generic sg5 type 0
usb-storage: device scan complete
sd 5:0:0:2: [sdf] Attached SCSI removable disk
sd 5:0:0:2: Attached scsi generic sg6 type 0
scsi 5:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 5:0:0:3: [sdg] Attached SCSI removable disk
sd 5:0:0:3: Attached scsi generic sg7 type 0
usb-storage: device scan complete
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
kjournald starting. Commit interval 5 seconds
EXT3 FS on sde1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
TCP(wget:15427): Application bug, race in MSG_PEEK.
TCP(wget:18681): Application bug, race in MSG_PEEK.
TCP(wget:4122): Application bug, race in MSG_PEEK.
TCP(wget:4275): Application bug, race in MSG_PEEK.
TCP(wget:19451): Application bug, race in MSG_PEEK.

HT3275 My backup disk won't mount on my desktop. The preferences window says it is not available. I am runng Lion on a late 2007 Macbook.

Similar Messages

Maybe you are looking for