HT3669 invalid accounting ID with xerox workcentre 7535

I have a Mac 10.9 .. and a xerox workcentre 7535..
I cant print and its keep on getting "invalid accounting ID" ... For sure. I entered the correct ID.
I used the latest driver as well.

I got this with recent Xerox drivers on 10.8 already. I got it working with the older drivers found here (bottom of page, last post):
http://forum.support.xerox.com/t5/Security-Accounting-Auditron/Workcentre-7556-a nd-Mac-OS-X-10-8/td-p/20658

Similar Messages

Xerox workcentre 7535 print driver no longer works with Mavericks 10.9.2

Unable to change any settings in Print dialog pane for Xerox WorkCentre 7535. Xerox says its an Apple software problem. They have issed three revised drivers since Apple released Mavericks OS-X 10.9.2. Not only does latest driver (4-11-14) not work, their universal driver for Mavericks no longer works. Anybody else trying to print on a Xerox device?

I think I solved this. Our Canada office has a WorkCentre 7556, and it was having the same problem(s).
Here's what I found and did:
Log into the printer's web interface. Go to the Properties tab. On that page, expand General Setup. Then click Configuration Report.
Find and click the link for Machine Hardware. In that box, find a line item for Finisher Type. Scribble down or remember your finisher type (ours was Xerox Professional Finisher).
On the Mac in question, go to System Preferences, Printers & Scanners. Find your Xerox printer, click Options & Supplies, and then the Options button. Now on our machine, from a default installation, the finisher was set to OCT (Offset Catch Tray) and was greyed out. Changing this to the correct finisher mentioned above made all of our errors go away.
Cheers, good luck, and um, I guess mark as Answered if this works for you please?

Printing problem with 9.4 with Xerox WorkCentre 7435

I have just upgraded my reader to 9.4.0 and having problem with Xerox WorkCentre 7435 printer. I have no problem with this pointer before the upgrade. I got the following error dialog when I print:
Please help.
Thanks.

Try resetting the printing system.
OS X Mavericks: Reset the printing system

Help with Xerox Workcentre 7232 & Mountain Lion 10.8.4

I just updated to 10.8.4 today, and I lost the ability to print to both my Brother MFC-J6710DW (wireless connect) and Xerox WorkCentre 7232 (wired connect) printers. Any suggestions?

I have a DocuCenter-IV C4470, it was working fine till I changed my router and forgot to change the IP setting coresponding to my printer IP.... First thing I did was to delete my printer on my Mac (bad move); then once I realized I can just change the IP setting on my router but everything was too late. After I re-install the printer on my Mac, i can not print anymore, the printer kept telling me this JCL Syntax Error 016-749. I tried downloading the latest driver from Fuji Xerox for OS X 10.8, but it didn't work, still showing the same error. I looked everywhere I could, both in Chinese & English sites, nothing really help. After spending 6 & plus hours, I finally found a solution. I went back to Fuji Xerox web site, downloaded all the possible drivers that fit my printer model; tried install every one of them, finally I found this drvier named "Macintosh OS X printer driver", this is none of the recent drivers, and it seems like an genetic driver for all DocuCenter printers. However, it works!!! I do not know how many ppl have this same JCL error problem, but this solution works for me. By the way, I even call the service center and discussed a while with the tech support; what they've told me is pretty much we can find on the web; they suppose to send someone over to take a look tomorrow, but I guess I do not need it. Good luck to those who has the same problem, and hope my solution can reslove yours, too.

Batch printing Yosemite in with Xerox Workcentre 7545 - authentication fails

Hi,
I have been trying to figure out how to batch printing with Yosemite to our Xerox machine. I did not find anything that could help so far. I contact Xerox and Apple costumer service but no luck. The problem is that I have a lot of exams to print and I can only submit one by one using Yosemite. I use a software to prepare the exams and it produces files in pdf format. For example, this week I had 340 exams to print. Imagine open one by one to print and enter your passcode every time. I gave up when I realize I could not do batch printing anymore. I use to be able to do that with Mavericks or older versions. Now with Yosemite, when I go to the printer and look at the options there is nothing related to Authentication. If I select all the files to send then to print, it all fail because of invalid user id. What I do is to switch to Windows. I was wondering if there is any work around it? For example, in Windows when you go to the printers you can go the the options and select the Xerox printer and then under "accounting" enter your passcode. That feature is completely missing in Yosemite. Even in Linux I can print using the Xerox machine. You can select the Xerox features when printing a file, but not in batch. I could concatenate the files and print everything at once, but then I would have to staple them manually.
Any suggestion will be appreciated.
Thank you.

Looking at the log, the Xerox rep might be correct about permissions. As the log shows the psto7750ps is a filter located in the Mac HD/Library/Printers/Xerox/PDEs folder and for this managed account is failing. So check the permissions on this PDEs folder and the file to ensure all users have Read & Write. Even if Everyone is listed with R/W, it may help to add the managed account to the list.
As a test you could create another queue to this AD printer but set the Print Using to Generic PostScript. This printer will not use the psto7750ps filter so if it works then you know it has something to do with this filter. I would then print the same file from the local account and check that this filter is also being called and is not erroring.
Note that depending on what function this filter performs it may not always be called unless something special is selected in the print menu. This would usually be the case for plugins located in the PDE folder (which stands for Print Dialog Extension) but since this is a filter (but in the PDE folder?) then it may be called every time its queue is used.
PaHu

Booklet issues with InDesign CS3 on Mac, and Xerox WorkCentre 7655 booklet maker

I'm having several booklet making issues I'm hoping someone can help me with.
I am on a MacPro, OS X Leopard, InDesign CS3. We have a Xerox WorkCentre 7655 that has booklet making capability. The network server is a PC with Microsoft 2003 server on it.
The booklet I am making uses two 11x17 trays - one for cover stock for the cover and one for regular 24 lb paper for the insides. The layout is single pages rather than spreads - spreads did not work at all.
From InDesign using the printer, the cover pages come out backwards and mirror image. The inside pages are upside down and on only half the page. I did not not InDesign file/booklet because that seemed to create even more problems with the Xerox booklet settings, and I don't know how to try InDesign booklet and not the Xerox settings.
I tried making a pdf and printing booklets from that. On the Macintosh, I can't figure out how to tell it the pages are 11x17 so it keeps giving me an error that the printer is waiting for 8 1/2 x 11.
I actually did get the booklets to print properly using the pdf file and a PC, but any gray graphics came out lilac. The text was black, and the covers were the correct colors - only the inside graphics were the wrong color.
I hope this makes some sense - I really need help. I've tried everything I can think of. I spent a lot of time with Xerox 1st and 2nd level support, and they have washed their hands of this. So I'm posting here hoping someone has some ideas.
Any other information anyone might need for this issue? Thanks so much.

I have a similar machine configuration and have had many issues printing to an HP 9500mfp. Pages rotate, mirror, 2-sided both print on same side. I've lost the "bookletmake" function. Jobs will not recognize paper trays (meaning I have to manually tell it which paper tray holds the tabloid stock). I've tried using the "Page Setup" dialog box to no avail. On occasion, I can get some of the features to work with a pdf printing from Acrobat. Sometimes, that doesn't work either - never with any kind of predictability. Printing to the HP 4700 is more reliable. I've downloaded the updated "Leopard" compatible driver from HP, but it fixed no issues. When I tried contacting tech support for HP, the replied that this is an OS issues and not with equipment, leaving me SOL.

Has anyone found a workaround driver for using a Xerox WorkCentre PE220 Series printer with Mountain Lion?

Has anyone found a workaround driver for using a Xerox WorkCentre PE220 Series printer with Mountain Lion?

John -
My "Use" menu only contains Apple print drivers. And Canon drivers, from the location I set this machine up. None for my home use....which is a Xerox machine.
Not being on the menu, I don't know how to acquire this generic driver.
Any further helpful hints?
I appreciate your thoughts and help.
Lisa

Invalid Account Code when Adding Outgoing payments with WTholding Tax

Hello Experts
I am facing problem when trying to add an outgoing payment (DI) with WTHolding Tax and below is the error message;
Invalid Account CodeMessage 173-9
I have checked the WThodling Tax Account in WThodling Tax Setup.
I am Using SAP 8.8 PL 19
Please Help Me
Dixit Patel
Edited by: Dixit Patel on Mar 25, 2011 1:37 PM

Hi
Please Check all G/L Account Determination TAB. Check all accounts are determined.
Check this Thread It may help you.
[Invalid Account Code error when posting AP Credit Note]
Thanks
Balaji Sampath

How can I change the iCloud account associated with my iphone

I changed my e-mail address a few months ago including changing my Apple ID to reflect my new e-mail. For some reason, my iphone and my ipad are both stuck with the iCloud username of my old e-mail address. When I try to delete these accounts like other forums have indicated to do, it won't let me because every password possible comes up as invalid and the "forgot password" e-mail never comes. I was wondering if there was a way to delete the icloud account associated with my old e-mail without having a password and replacing it with the updated iCloud information.

if for some reason your old iCloud account does not accpte or you do not remember your password, you can try this:
Problems after changing Apple ID primary mail address

Printing to Xerox WorkCentre 7655 From Mac OS 10.4.9

I have a 1.5 GHz PowerBook G4 (1 GB RAM) and upgraded to Mac OS X (10.4.9) a couple of days ago. My printer (Xerox WorkCentre 7655, attached through Airport Wireless/Ethernet) will only print one copy, regardless of how many copies I request. If I request 200 copies, I still only receive one copy from the printer.
I noticed that one of the problem 10.4.9 "corrected" was the number of copies with the print server.
What gives? How do I get the number of copies I request to print out correctly?
I have shut everything down, re-set everything, reinstalled the printer drivers, and scoured the settings to make sure they are correct. This was clearly engaged when I upgraded to 10.4.9... Any helpful thoughts?
PowerBook G4 Mac OS X (10.4.9)

I have encountered the same problem -- only prints one copy, regardless of how many are requested -- with our Xerox WCP C2636. Xerox tech support reloaded and upgraded the software on the printer and I reinstalled the PPD on my machine. Choosing "collated" fixed the problem in Adobe InDesign CS2 and Adobe Acrobat Pro 7. But the problem persists in other apps, such as Word 2004, Preview and Pages. I spoke with Xerox level 2 sofware support; they were unable to reproduce the problem on their test Mac (I suspect it wasn't upgraded to 10.4.9).
I suppose that I am joining the increasingly large number of users who are eagerly awaiting a fix for this annoying and frustrating problem.

The printer page size setting is not working in Photoshop 5.1 with Xerox printer

I am attempting to print an output size larger than 8.5 x 11 and Photoshop will not change the size even though the printer setting is now at the larger size. Illustrator and other programs will print but but Photoshop fails. This is an issue in both the 32 and 64 bit versions. Help!

I found the following on the Xerox site...tip of the hat to T Robinson:
Re: Photoshop CS6 on Win 7x64 prints only letter size on Workcentre 7655
03-20-2013 12:28 PM
We have a Xerox WorkCentre 7435 PCL6, and I have been having a similar problem. I found a workaround in Photoshop CS5, which I will describe in case it is helpful to others. I just upgraded to Photoshop CS6 however, and the workaround no longer works with it. Instead I get an error message if I print a Job History Report. The message is partially cut off at the right margin of the page, but the part I can read says, "Completed with error(016-799): Print Instructi...on Fail detected in Decomposer." (The ellipsis indicates the part of the message that is cut off. What follows it appears on the next line down. I downloaded all updates to CS6 to see if that would help, but it did not.
Here is the workaround that worked for me on CS5:
1) Click on "Print Settings" in the Print dialog
2) On the pulldown Paper menu, select "Advanced Paper Selection"
3) Select the tray where your tabloid (or legal) sized paper is loaded
4) Click on the button at the right end of the "Paper Size" field to display the Paper Size dialog.
5) Click on the down arrow button at the right end of the "Original Document Size" field and select "Tabloid" (or "Legal") from the menu.
6) Click OK to close each of the open dialogs til you get back to the Print dialog and then print your document. The print preview should update to show you a preview reflecting the selected paper size. (This may take a few seconds to happen.)
This worked for me in CS5. Unfortunately, as noted above, it does not seem to work in CS6. The only workaround I can come up with for CS6 is to save the file as a PDF and then print it from Acrobat. This works without a problem, but it's a lot of trouble to go to every time I have to print something other than letter size.
If anyone finds a better workaround in CS6, please let me know.

G/L account substitution with invoice reverse

Hello Gurus,
We have posted an invoice which is replacing G/L account value with the help of substitution ( substitution name = 'FPD_FNL') in MR8M tcode in which we have used the user exit 'U408' with some fixed value say 'X' but when we are doing the reverse invoice in that case its not showing sustituted G/L account value.
Can anyone help are we need to use the different user exit for reversing the invoice apart from 'U408'?
In the code, user exit is triggering for invoice reverse but for that particular document type EBELN is coming blank and hence it wont enter in our code.
BR
Sumeet

Hi,
I doubt if above note can be used.
Please see below description from the note i.e the fields which can be used for the substitutio.
You can carry out a substitution for some fields. If invalid values are
substituted in this case, you may receive the wrong function o
r error messages in standard programs. However, these errors are not
particularly critical. You can currently release the following fi
elds for substitution:
BSEG-FIPOS, BSEG-HBKID, BSEG-MSCHL, BSEG-MANSP, BSEG-MADAT, BSEG-MANST,
BSEG-MABER, BSEG-RSTGR, BSEG-ZLSPR
But we want to substitute HKONT ( G/L account ) for the same.
BR
Sumeet

Invalid Account Code Message 173-9 when posting Outgoing Payment

When attempting to post an Outgoing Payment our customer recieves the following error: Invalid Account Code Message [173-9]. The local currency is CDN and Invoice currency is US. The error occurs only when back dating the outgoing payment to Jan 31, 2011 on Posting, Due and Doc Date. If the Posting/Doc date are left as the current date and the Due is set at Jan 31, 2011 then there is no issue.
I've checked the posting periods, G/L determination and BP setup.
Note: this exact process has been completed many times in the past.
Version:
SAP B1 2007A SP01 PL11
Any assistance would be appreciated.
I've seen another post with a similar question but the answer did not solve our issue.
Invalid Account Code when adding outgoing payments

Hi,
You may check this: Invalid Account Code error when posting AP Credit Note
Thanks,
Gordon

Urgent: Invalid account group

Hi All,
For mapping a new scenario we have created a new document type YNB (copied from NB).But when I try to create a PO using this document type I get an error as "Invalid Account Group". The error is NOT there if I change the document type and use NB. Is vendor account group related to document type of the PO anywhere?
Secondly if I do the plant assignment in the vendor master with document type YNB the error is NOT there. That means the vendor account group is directly or indirectly attached to the document type NB .
Can anybody please tell me if something is missing. Also can somebody please send a document that elaborates the config to be done related to new document type which I might not have done.
Thanks in advance.
Vishal

If you have copied it using document type NB, then no such error should appear. Just check whether you have copied it properly.
regards,
go4S

Invalid account assignment category for Service order

Hi Experts,
We upgrade in ECC. I suppose this topic is linked to this one. See more detail below.
On a repairing flow, central alerts by a complaint from customer. Operator creates a Repair request, next receive the broken machine (VRRE + VL02N). A inspection lot is automatically generated. When operator takes Usage decision, customizing allow to create a Service order according to the right UD code.
My issue is on this place. When operator take the usage decision, SAP displays the error message "Invalid account assignment category".
Data in standard customizing are missing in "Define account assignment cat. and document type for purchase requisitions". Only "Acct. Assgmnt Cat. Gen." is filled with "F" value (Order). 3 other are blank. If I tryed to save, SAP rejected and asked for values.
If I check in SAP help, SAP indicates that we don't have to change these values if new types of categorie are not customized. Also SAP detailled the right values. What is strange is that the flow is running without these values in production. Test in development environnement block the flow and the creation of the Service order.
Have you already heard some strange behavior like this one ?
Moreover if you have more detail on the impact on this customizing, I'm very interesting, and also the good way to solve this issue will be great.
Thanks a lot for your precious help.
Stéphane

Closed

HT3669 invalid accounting ID with xerox workcentre 7535

Similar Messages

Maybe you are looking for