HT4061 The phone exhausted power. I plugged in my charger and I am getting the following response: Power on and the apple icon is visible, it is quickly replaced by a blue screen for about 1 second andf then black screen with no other activity. What is

The power was exhausted on my Iphone 5S. I plugged it into my charger and turned it on. The apple icon comes on briefly followed by a blue screen for about 1.5 seconds andf then goes black. What has happened?

Leave the device connected to power for about 30 minutes.
Then, disconnect from power, and turn the device on. If no response, then press and hold both the Home button and Sleep/Wake button down for about 15-20 seconds. Make sure it is not plugged in while doing this.
See what happens.

Similar Messages

My Ipod touch just downloaded IO6 but when I press the music button it goes to an entirely white screen for about a minute then reverts to the main ipod screen. I cannot access my music or podcasts. Have restarted both. What should I do?

Computer and Ipod have both been restarted. Video has the same white screen problem. THIS IS NOT THE WHITE SCREEN OF DEATH - just when I press the music or video button.

- Try connecting to comutr and then try to restor.
- If still white screen, let the battery fully drain. After charging for an hour try the reset and restore again.

I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

Hi I have a MacBook Pro 2011 i7 and it stays on for about 4 hours then the screen go's fuzzy and I have to turn it off by the power button has anyone had this problem thanks mike

I Have a MacBook Pro i7 2011 it stays on for about 4 hours then the screen go's all fuzzy and I have to turn it off by the power button has any body else had this problem thanks mike

My guess would also be a failling connection between your logicboard and your GPU. See 2011 MacBook Pro and Discrete Graphics Card
For most users it starts with some random crashes and freezes like you describe it. And then it just gets worse and worse. There are still no "good" solutions, sadly. This is a hardware problem from the production.

Ipod touch 5th generation battery screen with lightning bolt locked cannot charge or restart. ive tried everything from new cables attempting to shut down but stays at screen for a few seconds then black screen again over and over

screen locked up and shows the battery with low red and ligtning bolt and cannot hard shut down or reset just stays there for a few seconds then black screen. hooked up to computer and itunes doesnt recognize it or even shows that it is pluged in. looked and made sure nothing is broken or metal in ligting port or on cable which would prevent it from accepting a charge. ipod is only a month old and seems like a waste of money if its so hard to try to get an explanation of why this is ive been tryning to get an answer from apple for a week now.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

While loging in my Facebook account apple logo shwed up then blue screen then black screen and my phone didnt work ever since . what is that

I searching my Facebook account when apple logo showed up then blue death scree then black screen after all white and black stripped screen . It happened for a few times the the phone went off and didn't work ever since . What was that ?
And how can it be solved ?

Back up and restore your software via iTunes. If the problem continues, restore as a NEW device. If this solves it, that means there is some corruption in your backup file, or maybe it's one of your apps causing the trouble. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.
For the charging problem:
Inspect the charging port area for dirt/debris/fluff build-up that may be preventing a good connection and use a wooden toothpick, soft clean toothbrush, or a can of compressed air to clean it. Also look for bent or broken pins. Try another cable and/or charger block (be sure to always use a genuine Apple certified brand) in a known good outlet. If you're using a USB port, try another port. If you're using a hub, try a direct connection. If you're using a USB port in the front of a desktop computer, try one in the back. If all these fail, make an appointment at your nearest Genius Bar to have the device evaluated.

When I boot up the iphone 5s after it being off it will load then as soon as it gets to the lock screen it goes to sleep right away it will show me the lock screen for a second if that

When I turn on the iphone 5s after it being off it will load then show me the lock screen for a second if that and then go right to sleep mode right away as soon as the lock screen comes on

Hi Apple user 789,
Welcome to the Support Communities!
The following article will provide some troubleshooting steps for your iPhone.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If that does not resolve the issue, refer to page 146 in the iPhone User Guide to Reset All Settings:
iPhone User Guide for iOS 7
manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
The final troubleshooting step would be to restore your device:
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition. Before restoring:
Verify that you are using the latest version of iTunes.
Back up your device.
Transfer and sync content to your computer.
I hope this information helps ....
Happy Holidays!
- Judy

My iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat, every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats??

hello my name is kirstie, i updated to firmware 4.2.1 .....my iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat, every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats the same problem?? (if i turn the phone off my pressing the two buttons it wont keep rebooting, its only when i leave it after turning it on)
I have reset the phone, full firmware restore, even downgraded back from firmware 4.2.1 to .3.1.3 official by using dfu mode and still doesnt fix.
(i correctly got out of dfu mode after the downgrade)
i can enter dfu mode and recovery, and update through itunes with no problem, but it doesnt fix the problem,
i have searched and found no answer to this problem, every option availible to try that i know of i have tried and failed. i dont care about preserving my content i just want a fix. i have a good understanding how to operate software on a computer and shouldnt be too confused by any advice given, so plz even if the answer is very complex i wish to try anything, please help me to get my iphone working.

Anyone have any suggestions? or is everyone else just as clueless as me !

HT4061 the screen is blank and the phone does not respond even after pressing the on/off and home button. the only reaction is the vibration felt when I plug in to charge the phone. What should I do?

The screen of my iphone 4 is blank and the phone does not respond even after pressing the on/off and home button, the only reaction is the vibration felt when I plug in to charge the phone. What should I do?

This is the ipod touch forum

I put my iPod charging, but it wont charge. The Apple logo appears on the screen for five seconds and then it goes off again. Afterwards, it does it again and again and again. I can leave it 1 hour or day charging and it will be doing this the whole time.

I put my iPod charging, but it wont charge. The Apple logo appears on the screen for five seconds and then it goes off again. Afterwards, it does it again and again and again. I can leave it 1 hour or day charging and it will be doing this the whole time. What should i do????????????????????????????????????????????????????????????????????????????? /

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
and
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

VMware View Session go Black screen for some seconds

Hi Guys,
Recently one of my client is facing issues that VDI Desktop session is going black screen for few seconds and automatically session comes back. I have increased PCoIP Configure the PCoIP session Bandwidth floor to 200. still facing same issue.
Note : All user facing this issue is in branches and we have 2 GBps pipeline Datacenter to Branches. Normally 40% is the network utilization.

Sorry, I was thinking the APEX 2800 cards were related to this, but that was a different ticket I was thinking of. So scratch that.
As far as this problem goes, I have seen this issue happen numerous times. It only happens with users with dual monitors. Here's a workaround: Control Panel > Mouse > Pointers > Scheme > Select a non Aero scheme
It took VMware quite a few months, but they finally generated a KB for it and closed my ticket: VMware KB: Zero client monitors will randomly go black for 1-2 seconds

My iphone 4 only turns on when its plugged into a wall and when it finally turns on it lasts for about a minute then it turns off and while its on the signal says searching, what should i do?

my iphone 4 only turns on when its plugged into a wall and when it finally turns on it lasts for about a minute then it turns off and while its on the signal says searching, what should i do?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. You likely have a bad battery.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one with a new battery for $79. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace yur battery for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery yourself if you are up to it. A replacement costs about $10
iPod Touch Repair – iFixit

Lightroom won't boot -I only get the splash screen for a second.

I do have the photographers version of the Creative Cloud which included Photoshop CC 2014 and Lightroom. Everything was working just fine until I upgraded to Lightroom version 5.6. Now when I try to load LR, the slash screen shows for a second then disappears and LR does not load. This occurs on both my Mac (a Mac Pro and a iMac). I uninstalled LR and had creative cloud reinstall but still the same thing is happening - Splash screen for a second then nothing. Again, this is happening on both Mac's. Photoshop CC 2014 I working just fine.
Before I call Adobe, any ideas here on this issue. BTW, Creative Cloud App states LR in up to date and installed.
Thanks
James

Hi PBAYARD,
I see that you are experiencing an issue with your iPod classic. Here is an article for you that will hep you through some troubleshooting steps regarding this issue:
iPod: No power or frozen - Apple Support
https://support.apple.com/en-us/TS1404
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Boot Camp won't boot Win 7 DVDs /Cloned disks - White cursor flashes once then Black Screen of Death.

Hi Guys,
I am having a serious issue with my machines ability to use boot camp. Here's what happend: I had Win 7 installed on the BOOTCAMP partition for a long while, then one day my HD crashed. So naturally I got my HD replaced from Apple and got Lion reinstalled and wokring flawlessly. Then I planned to get my Boot Camp going again, but my computer has a will against it I swear. So I run Boot Camp Assistant , create the parition and reboot. At this point I have my Win 7 disk burned using Disk utility in the drive, I am using a dvd disk image from Microsofts online store. I reboot and the computer hangs at the "pick a harddrive" grey for a second. Then the DVD drive spins up and I get a black screen, then for ever so slight a moment there is a flash of a white _ a the top left, then flash , nothing, the screen remains illumniated. Now I tried this multiple times , let it run over night , and nothing. Its almost as if my laptop will no longer boot the style of dvd that win 7 is.
Being a diagnostics first type of a person I tested all the variables, the win 7 cd works fine in other macbook pros. My computer boots other mac os x DVDs without a problem. I also tried using winclone to create a copy of another machines Boot Camp and flash it to my BOOT CAMP drive but this has the exact same result! Therefore it seems that the underlying system that runs my Macs ability to boot from Windows-style? partitions and dvd is broken. I also tried installing rEFIt, but that doesn't seem to help. I also tried booting off of an external USB drive with the same result. I tried zapping p-ram , scm and doing all software updates.
Has anyone expereinced anything like this? Anyone found resolution to a similar issue? Any other tricks related to Macs EFI and boot process that I could use to debug this? Anywhere that EFI stores logs possibly?
I went to the Apple's Genius Bar and they were stumped on my issue. I felt that they should be able to fix it considering it booted fine before I had Apple replace my HD.
Thanks to any responders, I'm really hitting my head on the table now and would love some help.

Have you reset the PRAM? It should usually be done when replacing any hardware. Have you got the latest EFI firmware for your Mac?
Not knowing what model /YEAR your MBP is (not that it would help me too much but the other fellas probably would) it's hard to guess as there are issue's for different models. The only thing I could find was it's usually caused by a non-conforming video driver. Microsoft had a page on it I found by accident and now I can't find it!
WinClone hasn't been updated by the original author in over a year, others have tweeked it a little to work with W7 but seems to be semi reliable, so the be aware.
Unless the other MBP's are identical in Model AND year your putting older or incompatible drivers on your MBP. Boot Camp, (especially if your using the drivers on the original install disks, like 10.6 and earlier) will only install for that specific computer. Just like the OS installer.
EDIT:
Oh yeah, are you sure you have the partition formatted the right way, thats another black screen problem.
Message was edited by: Jaygyver

[solved] Blank screen for few seconds between GDM and Gnome-Shell

Hi there,
I don't know if this phenomenon is "normal" or not, so I ask : I am using Gnome 3.6 and after I have logged in on GDM I see a blank screen for roundabout 3 seconds before the gnome-shell starts. The whole system is running fine - so this is no "real" problem -, but this 3 seconds of a black screen between GDM and the gnome-shell are somewhat annoying and I want to find out if this behaviour is normal or not .
Indeed, if I look into journalctl, I find this messages:
Dez 03 21:45:53 sushi gdm-simple-slave[272]: WARNING: Failed to give slave programs access to the display. Trying to proceed.
Dez 03 21:45:53 sushi gdm-launch-environment][305]: GLib-CRITICAL: g_variant_compare: assertion `!g_variant_is_container (a)' failed
Dez 03 21:45:53 sushi gdm-launch-environment][305]: GLib-CRITICAL: g_variant_compare: assertion `!g_variant_is_container (a)' failed
Dez 03 21:46:03 sushi gnome-session[311]: WARNING: Detected that screensaver has left the bus
Dez 03 21:46:03 sushi gnome-session[311]: CRITICAL: gsm_manager_set_phase: assertion `GSM_IS_MANAGER (manager)' failed
Dez 03 21:46:03 sushi gdm-simple-slave[272]: WARNING: Failed to remove slave program access to the display. Trying to proceed.
Dez 03 21:46:03 sushi gdm-simple-slave[272]: WARNING: Child process -311 was already dead.
Dez 03 22:00:50 sushi systemd-tmpfiles[1793]: stat(/run/user/1000/gvfs) failed: Permission denied
Actually, I don't know if this is relevant for my little "black-screen" problem (but it looks as if ...).
And
$ systemctl status gdm.service
shows nothing to worry about (as far as I can see):
gdm.service - GNOME Display Manager
Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled)
Active: active (running) since Mo, 2012-12-03 21:45:51 CET; 40min ago
Main PID: 266 (gdm-binary)
CGroup: name=systemd:/system/gdm.service
├─266 /usr/sbin/gdm-binary
├─272 /usr/lib/gdm/gdm-simple-slave --display-id /org/gnome/DisplayManager/Displays/_0
├─279 /usr/bin/Xorg :0 -background none -verbose -auth /var/run/gdm/auth-for-gdm-xTnD7p/database -seat seat0 -nolisten tcp vt1
└─440 gdm-session-worker [pam/gdm-password]
The hardware is an Asrock H77M-ITX board with an Intel GPU. Systemd is up and running well, no failing service units.
Any ideas, what's going on here?
Last edited by swordfish (2012-12-08 14:26:00)

Finally I found out what's going on - and it's so simple
It's just my monitor which is runing on a default resolution of 1920x1080. When I switched to 1600x900 using Gnome's system tools, the monitor needs roundabout two seconds to adjust to this resolution

HT4061 The phone exhausted power. I plugged in my charger and I am getting the following response: Power on and the apple icon is visible, it is quickly replaced by a blue screen for about 1 second andf then black screen with no other activity. What is

Similar Messages

Maybe you are looking for