HT4097 please my ipad in recovery mode after last update and i tried the previous steps and it is same condition in recovery mode please i need your help

please i need your help i made update to my ipad to the last version then i find it in recovery mode and tried to restore it using i tunes but it the same in recovery mode please i need your help to solve this problem

If you followed these instructions and you were unable to enter recovery mode, I'm still leaning toward a hardware problem.  Also, since you have IOS-7, read this.  It might help.

Similar Messages

  • Can't open Keynote files after last update. I created the files with Ipad 2, the same Ipad which won't open the files now. No Mac involved. What can I do to habe access again?

    Can't open my Keynote files after last update on Ipad 2. I created the files on the same Ipad. No Mac involved. What can I do to open and use the files again?

    Finally, this helped me:
    https://discussions.apple.com/message/23602871#23602871

  • My iPad closes apps frequently after last update to iOS 5

    I have an iPad 2 and before I've done the update to get iOS 5 it hasn't happened. I think it is a problem with the new system.
    My sister says the same thing happens with her iPad too.
    Does anyone knows how to fix this?

    You could try closing all apps completely and then do a reset and see if that helps. To close all apps : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    To reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • IPAD 2 is blocked after last update - Help

    After I instaled an update yesterday night.
    On the screen I see iCloud Backup says the IPAD hasn't been backed up for 33 weeks etc... Usually I press ok and I can use my IPAD. But now it is stuck!
    I tried switching on and off. I tried to  slide to unlock. Nothing works.
    Help

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • Ipad 3 randomly reboots after last update

    Last night I updated the IOS to 6.1
    now the Ipad randomly reboots
    Even when it sits idle

    Same issue with my iPad 3.  Happened with 6.1.3 and still happens after upgrade to 7.
    It's nearly full, perhaps that's contributing to the problem.  Apple doesn't seem to know how to do memory management properly, nor QA, for that matter.
    Also, they conveniently forego the troubleshooting tools present on other platforms.  So the only way to get some insight is to bring it to the "Genius".  Problems with that approach are: most often, the "Genius" isn't that bright a bulb and won't find (or won't be willing to spend time to search for) the root cause.  Also, they now require an appointment, and that's a major PITA.  I just don't have the time to deal with them and their ways to disguise shortage of qualified support resources under fancy terms..  My next portable device will be a slate!

  • HT1414 My ipad has gone into recovery mode after an "error occured" whilst trying to update it. Will it come out of recovery on its own? There is a lot of data I want to save

    My ipad has gone into recovery mode after an "error occured" whilst trying to update it. Will it come out of recovery on it's own? There is a lot of data I want to save before restoring it to factory settings

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • IPad in recovery mode after recent update

    Is there any way to get my iPad to turn on after latest update caused the iPad to go into recovery mode?

    RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • IPad 2 stuck on RESTORE (not recovery) mode after iOS7 update

    My update to iOS7 seemed to go OK, now I got to "Restore from backup/iTunes" and here's where things turned sour.  I actually SAW glimpses of iOS7 on the iPad and went through the Hello screen and WiFi setup etc.
    It's now stuck on the black screen with white Apple in the middle and little white line progress bar under it - but that progress bar has only made it about 1/8 of the way to the end and seems completely froozen.  It's not a 500TB iPad - this should only take a few minutes at most.  something is wrong.
    The only USB items I have connected are my keyboard and iPad 2 - nothing else.  And they are direct into the Mac.
    So yea, updating to iOS7 bricked my iPad.

    It took multiple attempts but this finally just resolved itself.  go figure.

  • Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

    Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

    In the article Resolve iOS update and restore errors this is what it says about error 14:
    Check your USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
    If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
    To narrow down the issue, you can also change up your hardware:
    Use the USB cable that came with your device, or a different Apple USB cable.
    Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
    Try a different computer.
    If necessary, resolve any further issues with the USB connection, then with your security software.
    If you're still seeing the error message, check for hardware issues by following the next section.

  • HT4157 I have a cellular data account on my iPad. Almost immediately after I signed up, my e-mail was hacked and had to be cancelled. I cannot get into my AT&T cellular data account now to change the billing and account to my new e-mail. Please help.

    I have a cellular data account on my iPad. Almost immediately after I signed up, my e-mail was hacked and had to be cancelled. I cannot get into my AT&T cellular data account now to change the billing and account to my new e-mail. Please help.

    According to the AT&T Wireless web site, you can manage your iPad data plan either from the iPad, or by using a web browser:
    From the website
    Log in to your account at att.com/iPadlanding using the email address and password you used during activation.
    Your account information will display. Select the desired account change option then tap Next.
    Read the Terms of Service, and then tap Accept.
    Review the Payment Summary to ensure the details are correct. Use the Back button if changes are required, otherwise tap Submit.
    Read the Confirmation message then tap OK.

  • TS1363 my iPad air cannot reconnect to my computer and it has  the iTunes logo with a plug picture on a black screen, PLEASE HELP!!!!

    I was updating my iPad air  and in the middle of update it suddently cannot reconnect to my computer and it has  the iTunes logo with a plug picture on a black screen, PLEASE HELP!!!! I did try steps from http://support.apple.com/kb/HT1808?viewlocale=en_US    - IT DOES'N WORK!

    Yes, that is your only option.Yes.  You have to restore.
    Try the following if you have difficulty restoring.
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • HT1212 my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spell

    my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spelling.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. If you did not do step 4 properly, start all over again.

  • I just bought a new ipad 2, but cannot use it as it only shows the itunes logo and a cable. This means it's telling me to connect to itunes. I've done this and performed sync, still no way out. I have been told by friends to "unlock" it. Please how?

    I just bought a new ipad 2, but cannot use it as it only shows the itunes logo and a cable. This means it's telling me to connect to itunes. I've done this and performed sync, still no way out. I have been told by friends to "unlock" it. Please how?

    Have you already activated the iPad? That is what the screen is telling you to do - connect to the computer with the supplied cable and run iTunes while connected - and iTunes should guide you through the set up process. If you have already set up the iPad and you are still getting thos screen message - restore your iPad. You must be running iTunes 10.5 on your computer as well.
    Restore iPad
    If you can't restore this way, you will need recovery mode.
    Unable to Restore

  • I was using my ipad it was under 10% but no under 4% it turned off then i pluged the charger in and flashed on then showed apple sign after i turned it on. now its going back and forth from the apple sign and battery symbol ive changed chargers its not on

    hey please help!
    i was using my ipad it was under 10% but no under 4% it turned off then i pluged the charger in and flashed on then showed apple sign after i turned it on. now its going back and forth from the apple sign and battery symbol ive changed chargers its made no differnce its been like 3 hours ive tried to do that reset thing holding lock button and home button for 10 seconds at the same time. WHAT DO I DO?

    Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
    http://support.apple.com/kb/TS2802
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    iPad: Charging the battery
    http://support.apple.com/kb/HT4060
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • HT201263 How to access Recover Mode after selecting Update rather than Restore during reset?

    Looked like I screwed things up on my iPad badly.  My iPad no longer recognized my passcode (I know it was right since I use my iPad many times daily) and became disabled.  I followed the instructions for the factory reset, however, I selected update rather than restore in hopes that it would purge the password and get me back in.  The result, my iPad is still disabled, holding the sleep/wake button no longer exposes the slide to power off the iPad, and holding down the home button does not get me back to recovery mode.  Any suggestions would be greatly appreciated!

    Hey eng513,
    There is another method to getting your iPad back up from being disabled. If you have an iCloud account signed in, you can erase it from iCloud.com and then go through the setup steps to get you back up and running. Take a look at the article below to help you out.  
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled
    http://support.apple.com/en-us/HT1212
    Take care,
    -Norm G. 

Maybe you are looking for

  • Getting existing wireless solution working with Windows 7 client

    A bit new to this so need some help I have been asked to do some innovation around an existing operational wireless solution. Setup is; 1. Wireless client - running Juniper Odyssey client. This authenticates user on logon to Windows using username /

  • JMS using JBoss !!!

    Hey, ich just have a problem realizing jms over the jboss server. Actually, if you want to implement a JMS-Producer or JMS-Consumer you need to define a �*-servie.xml� file which hast to be copied in the deployed directory of the server and it has to

  • IBooks Author crashes when I add video.

    Every time I try to add a video file to iBooks Author it crashes. I have tried uninstalling and re-installing the software as well using different video formats. It does not seem to matter, the program still crashes. Any suggestions?

  • FLEXENT-791 - Is this bug resolved for sdk 3.0??

    I know this bug http://bugs.adobe.com/jira/browse/FLEXENT-791 is resolved in flex sdk 3.4 onwards. I am using flex sdk 3.0. The workaround mentioned here is not working for me. Please let me know is it possible to use the 3.4 automation swcs with fle

  • DPM 2012 VSS Errors

    We have our DPM 2012 R2 installation on Windows 2008 R2 servers. We encounter failures some of the time on our Full Express Backups on Friday evenings where we get VSS errors in the event logs.  Event 12298 Event 12289 We haven't encountered these is