Getting existing wireless solution working with Windows 7 client

A bit new to this so need some help
I have been asked to do some innovation around an existing operational wireless solution.
Setup is;
1. Wireless client - running Juniper Odyssey client. This authenticates user on logon to Windows using username / SecurID token / pin. Configuration via WAP / TKIP
2. Cisco Aironet Wireless Access Point
3. Cisco 4402 Wireless LAN controller
4. Cisco ACS v4.1 - configured as RADIUS server with connection to external RSA Authentication Manager 6.1
As part of a transformation programme I have been asked to investigate whether this existing wireless infrsatructure will work with Windows 7 as the client operating system. Also to look whether the wireless functions in Windows 7 will allow the Odyssey client to be removed.
I am unsure what client if any I need to install on the Windows 7 client in order to try and get this working. Do I need the VPN client from Cisco, the RSA EAP client or will Win 7 allow me to do this.
Any help appreciated.

I am still struggling with this concept of suplicants
I have tried to set this up with the wireless capabilities in Windows 7 to no avail. I see that Windows 7 only supports certin EAP types - how can I find out what my EAP type is on the ACS server?

Similar Messages

Can't get Palm Zire to work with windows 7

Can't get palm zire to work with windows
Post relates to: Palm Pilot

Please review the "stickied" threads near the top of this board, about syncing with Windows 7 and Vista. It's all there.
After you've been through and tried everything there is to try, and still have problems, please post back with specific info about exactly what you've tried, what version of Windows 7 you have (32-bit or 64-bit), etc.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Can the wireless printer work with window 7?

can the wireless printer work with window 7?

Will this wireless printer connect to the AirPort Express Base Station (AX) via a wireless or USB connection?

How can I get photoshop CS2 to work with Windows 8.1?

how can I get photoshop CS2 to work with Windows 8.1?

Have a look at
http://forums.adobe.com/message/4976720
Cheers
John

S10-3t bluetooth and wireless not working with windows 8

S10-3t bluetooth and wireless not working with windows 8. I tried everything but doesn't work at all. I don't know where to find the new drivers that are comatible with windows 8 ???!!! please help me to solve this problem because i tried everything....

Do you still have your windows7 install files ?
( installation image is usually in LENOVO_PART OKRBackup/Factory ) ? I lost them :\
if yes I fear you have to enable it in win7 and then use it in win8
http://rzr.online.fr/q/lenovo# g470 s103t (Please Contact me if your s10-3T is booting win7 or support bluetooth, 3g)
Lenovo S10-3t | Model Name : 0651 | Mfg Date: 2010/06/08
Lenovo G470 | Model Name : 20078 | M fg Date: 11/03/23 | BIOS: 40CN23WW(V2.09) 06/20/2011 | CPU: i5-2410M | Linux version 3.3.4lenovog470+ (root@lap) (gcc version 4.6.3 (Debian 4.6.3-4) ) #8 SMP Tue May 1 10:23:48 CEST 2012
OS:GNU/Linux/Debian

Cant get my printer to work with Windows Vista

I have a Deskjet 932C printer. I bought my computer 2 years ago and my printer worked just fine with Windows Vista. We just moved so I had to take everything apart and put it back together. Now I cant get my software to install that came with my printer and when I plug the USB cable in its not reading that there is new hardware. Can someone help me???

shortyk wrote:
I have a Deskjet 932C printer. I bought my computer 2 years ago and my printer worked just fine with Windows Vista. We just moved so I had to take everything apart and put it back together. Now I cant get my software to install that came with my printer and when I plug the USB cable in its not reading that there is new hardware. Can someone help me???
If the printer was installed previously then you would not detect new hardware when plugging the printer in. Go to Start, Control Panel, Printers and check for an existing Deskjet 900 series printer. If this printer exists in the list double click on it and check to see if the printer is shown as offline or paused. If so correct the issue by clicking the appropriate line.
If the printer does not show as installed then install it as shown here. If this does not correct the issue then unplug the USB cable, then go to the device manager and delete the ports associates with the USB printer and allow the system to rediscover the USB devices.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

U430 Touch: wireless not working with windows 7

My friend bought a U430 Touch with Windows 8. He hated Win 8 so I helped him downgrade to Win 7. Now the wireless dowsn't work. Ethernet works fine and we are able to get on the internet, but wireless does not work at all. I've been to Lenovo's site and downloaded the drivers from their support site, but nothing weems to work. Is there a special driver I'm missing?
Solved!
Go to Solution.

It's possible that they are shipping with Intel only at the moment, but the Hardware Maintenance Manual lists two non-Intel cards: a Liteon, and a "non-Intel", whatever that means.
Just sayin'
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Trouble with getting the wireless to work with HP Laserjet P1102w printer

Hi really struggling
I just bought the HP Laserjet P1102w as it was advised that it would run my apple products (Mac OS 10.6 Snow Leopard laptop and ipad).
I have mangaed to set up printer to work using the USB cable to the laptop. Success.
BUT i am finding it impossible to get it to work with wireless on any devices.
I get as far as network selection in set up and nothing is in the list (unlike USB which has the printer named) - so i click the 'create' button and input my network/SSID code , which is a BTHub. I assume this is correct? Or is it an address to be found elsewhere ? I have downloaded driver and software (update HP Firmware utility)
which I believe to be correct from the HP.com website for the operating sytem of the mac.
I have also followed a number of videos but often the process does not follow the video sequences.
I have tried to speak to PC Word 'know how team' who sold me the printer but they had no knowledge at all to help this situation. Any help would be much appreciated - this seems l ongoing problem for some other users.

Hi @bgriffiths60 ,
I understand that you are having issues setting up the printer over the wireless network. I would really like to be able to help you resolve this issue.
To check your network Encryption type, go to the Apple, System Preferences, Network, click the Advanced button/double click the network name. (shows WEP or WPA)
To check the network password follow these steps:
On the Apple menu bar, click Go, select Applications, Utilities, Keychain Access, double click the network name,
check the box to show the password, type in your Mac password to view it. (some networks have a shortcut password setup)
Make sure Safari is set as the default browser. Sometimes the Embedded Web Server won't open in other browsers.
Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
Restore the printer defaults: Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
Print out a configuration report and make sure the SSID and IPv4 address are cleared.
HP LaserJet Pro P1102 and P1106/P1108 Printer Series - Printing a Configuration Page.
Go to the Apple, System Preferences, Print and Fax.
Double click on the P1102w.
Open the Utility.
Click Printer Setup.
Click HTML config.
This should open the Embedded Web Server for the printer.
Click the Networking tab.
Click Wireless from the list on the left.
Under Communication Mode , click Infrastructure.
Select your network SSID from the Available Network Names (SSID) list and then click the << button so the network name moves over to other box.
From the Security Mode pop-up menu under Authentication , click WEP, WPA/WPA2 or open . Your selection depends on which Wireless Security Protocol your network uses.
Make sure you select either hexadecimal or alpha depending on your password. (very important)
Apply the settings.
In the confirmation box (changes have been saved), click OK.
You should get a solid blue light on the printer shortly.
Then all we have to do is delete the USB driver and add the network driver.
Click on the Apple.
Click System Preferences.
Click the Print and Fax icon.
Highlight the printer and click on the - sign to delete the printer. (USB driver)
Disconnect the USB cable.
Then click the + sign and select the printer from the list and click add. (P1102w Bonjour)
Test the printer.
If you have any issues with the HTML config opening then do the following steps:
Close any applications.
On the Apple menu bar, click Go, Computer, MAC harddrive, Library, Printers, HP, LaserJet, click on folder for your printer, click on EWS browser or HTML config, click the Networking tab, click wireless on the left and fill out your information. (make sure infrastructure is selected) Apply settings.
Then delete the USB driver and add the network printer.
If there is anything else that I can help you with just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Compaq Presario R3000 how to get the sound to work with Windows 7 RC

1) Download SP29586.exe: ftp://ftp.hp.com/pub/softpaq/sp29501-30000/sp29586.exe
2) Run it, Create a directory c:\ swsetup
3) Once all the Files are extracted DO NOT INSTALL
4) Now Goto the Start Menu Click on Devices and Printers, the Click on the Name you have called your machine this will be marked will a yellow triangle as the sound driver windows 7 has install already is a realtek ac 97 which is not working,
5) Once your Machinename you will see a general tab and and hardware tab select the hardware tab.
6) Look for the Realtek ac 97 under the Device functions, select that and click properties,
7) Now tab to the Driver, now click update driver,
8) Select the option let me pick from a list of devices drivers, now click have disk
9) Click on Browse select the following location Swsetup\SP29586\SMAXWDM\W2K_XP and click on smwdmCH6.inf
10)Now the Soundmax Driver should come up select ok and next. Now your Sound will work
This question was solved.
View Solution.

I am basicaly having the same problem with my labtop. I tried the following above and yet I still have not been able to get my sound to work. I have had some problems with my power and sound cards before but after I reinstalled windows my graphics card and sound card have not been working to their full potential. I thaught that it was a 64 bit graphics card, but now I am not so sure. I had to jostle the power cord in the back till I mannaged to find a perfect spot to keep the computer running. Before the reinstallation I had to put pressure on the left side of the computer to get the sound to work.. but even then it still came in and out.. "The sound that is." I can see the same driver in the codex menue and it is yellow but, what you stated above did not work.
It says (Cannot continue the hardware update) The wizard cannot find a better match for your hardware than the software that you curently have installed. and then tells me to keep the current software. My sound Icon does not show up when I go to the settings.... I can't play diablo 2 on this no idea why... But my screen is choppy when I scroll through internet sites and it did not do that before. I have a 400mbs connection .... here is my computer information. :Compaq Presario R3000 Intel pent4 2.80ghz 2.80ghz 1.12GB ram and im running on windows xp2 professional.

How to Get Your Inkjet Printer Working with Windows 8 Consumer Preview

The drivers for your HP Inkjet Printer are already included in the new Windows 8 Consumer Preview!
You do not need to download drivers to use the product. Keep reading to learn how to install the print driver included in Windows 8 Consumer Preview with your HP printer.
Getting started in Windows 8 Consumer Preview
HP designed a quick and easy tool that helps you find the best driver for your printer in Windows 8 Consumer Preview: the HP Printer Install Wizard.
Download Printer Install Wizard for Windows 8 Consumer Preview
NOTE:The HP Printer Install Wizard is not available for all printer. This tool is available only for Windows 8 Consumer Preview. The HP Printer Install Wizard works with products connected with a USB cable or with a wired (Ethernet) or wireless network connection. If you would like to connect your product wirelessly, but it is not yet on a wireless network, you need to temporarily connect the product with a USB cable to run the wizard.
Step one: Download the HP Printer Install Wizard
1.   Click the following link to download the Printer Install Wizard:
HP Diagnostic Utilites
2.   When the tool finishes installing, click Finish. The wizard opens automatically.
Step two: Run the HP Printer Install Wizard
1.   Press the Power button to turn on the printer, if it is not already on.
2.   Connect the USB cable to the HP printer and to the computer, if it is not already connected.
3.   Make sure that your computer has an internet connection. The wizard must access the internet to work correctly.
4.   Click Next to begin the utility. The wizard displays a list of detected printers.
5.   If the wizard detects more than one printer, select your HP printer from the list.
6.   The wizard automatically displays the best available driver for your HP printer.
If a full feature driver is available, the wizard detects it. Click Next to download and install the software. For full functionality, HP recommends installing the full feature driver if it is available.
If an included print driver is available, the wizard explains that the driver is already installed. It will also supply a link to more information about using an included driver.
JonW
I work for HP

This is GREAT! My printer has print drivers available.
If I have helped you solve your issue please mark it as solved .....
(I am an HP employee)

How do i get new imac to work with windows

I'm new to the imac world, how do I get it to work with windows

If you are talking about MS Windows then you need to launch either Boot Camp or run it in Virtualization app such as Parallels or VM Fusion. You also need a valid license of MS Windows.However if that is not what you mean then you must be much more specific. For example:
"I want to share some files between my PC running Windows 7 and my new iMac running 10.9.3, how do I go about that?"

Can't get quick time to work with windows thumbnail

When I purchased a new camera, unlike my old camera that saved files as .avi and which allowed me to use the files with all software and which allowed me to view automatically the thumbnails for the .avi file, my new camera used the garbage .mov from apple. Result: i can't see what the files contains... NO thumbnails in windows! I was told to buy QUick time Pro to be apple to do this. I did what the quicktime "help" (misnomer) said to do: set poster frame, resave the file (try to save it as is, or as quick time mover). THIS DIDN'T WORKED. There was Ø supplementary information. The only thing that works is MANUALLY converting all my .mov from the camera to .avi using quicktime pro. I paid CAD$39 FOR absolutely NOTHING. Any suggestions?
<Edited by Moderator>

Please review the "stickied" threads near the top of this board, about syncing with Windows 7 and Vista. It's all there.
After you've been through and tried everything there is to try, and still have problems, please post back with specific info about exactly what you've tried, what version of Windows 7 you have (32-bit or 64-bit), etc.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Why is RV082 PPTP no longer working with Windows 7 clients?

RV082 Firmware Version 2.0.2.01-tmRV082 Firmware Version 2.0.2.01-tm
I have successfully used the built-in Windows 7 VPN (PPTP) to connection to an RV082 (Firmware 2.0.2.01-tm) many times in the past. The Windows 7 client stopped working recently, now producing "error 691: the remote connection was denied because the user name and password combination is not recognized." I have the same problem from two different Windows 7 clients and Windows XP clients still work.

Hi Tad,
since this question is about a product in the Cisco Small Business / Linksys range, I suggest you move it to the community, where you will have a better chance of getting expert advice.
best regards,
Herbert
Cisco Moderator

Windows 8.1 DPI scaling does not work with Windows 7 client ?

I have a Surface Pro with Windows 8.1 and a PC with Win7 SP1 both fully updated including optional updates (RDP8.1 client for Win7, verified in about box).
Still, when I connect to my Surface from my PC everything is enlarged.
My PC has two monitors: primary 1920x1080 and secondary 1680x1050. I've tried opening connection on each one of them as well as on both (multi monitor). I've also attempted to use windowed mode with lower resolutions.
Surface is set to default DPI settings (slider moved to Larger and "Let me choose one scaling" is unchecked). Also, when I'm connected via RDP I cannot move the slider ("Some display settings can't be changed from a remote session") though
I can click "Let me choose..." but that requires a sign-out. Another oddity is that my remote desktop client does not have a "Smart sizing" window menu item.

Hi,
When you are within a session you should be able to check the option Let me choose one scaling level for all displays, change the scaling, sign out, then when you reconnect it will have the new dpi setting applied. This is the expected method for a
Windows 7 client.
-TP

Can't get Airport Express to work with Windows

I got a used Airport Express to use as a wireless print server. I got only the Airport Express; no manuals or CD's or anything. I have been reading through the manuals and everything online, but I can't get anything to work. It seems like I need to get the Airport Express Assistant, but I can't find it. I got the Airport Admin Utility, and that installed fine on Windows Vista. Then I installed what I thought was the Express Assistant, and it just seemed to change the Airport software in the start menu, but I still don't have the Assistant, only the Admin Utility. Anyway, I open the Admin Utility and it opens the Base Station Chooser. There is nothing there, so I rescan, and it seems to do nothing. It doesn't find anything anyway.
Where do I go from here? I am kind of stuck. I am trying this on a Windows Vista PC which is hardwired to a Linksys WRTSL54GS router. I have the airport express plugged in and the light is flashing Amber. I have a HP psc2410 plugged into the airport express that I would like to print wirelessly to.
Thanks for any help.

You don't necessarily need the AirPort Setup
Assistant, you should be able to set up the AirPort
Express Base Station (AX) with the AirPort Admin
Utility...as it is a much more powerful tool. You
need to make sure that you are using the version for Windows. At this
time, the AirPort software is only supported for
Windows 2000 or XP. A Vista-version has not been
released.
I suggest the following...
- First, perform a "factory default" reset on the AX to get
it back to it's original "out-of-the-box" state.
- Next, temporarily connect your computer directly,
using an Ethernet cable, to the Ethernet port on the
AX during the set up phase.
- Then set up the AX as a "wireless client."
I have this same problem. I have a Vista Windows notebook and I am trying to get airport working to play music wirelessly through my home stereo. The "base station chooser" software does nothing on my Vista notebook.
I used a friend's MacBook and was able to set up the airport as a client so I can see it listed in my Dlink router DHCP Client Table. The airport express box is plugged in, has a steady green light and everything looks good except there is no option to choose "computer" or "home stereo" speakers in my iTunes. i installed the airport express CD including the itunes it came with.
Any ideas how to get this working on vista? Previously i had the newer version of iTunes 7.1 installed and the airport express CD told me it couldn't complete the install because a newer version of iTunes was installed. I uninstalled the iTunes and reinstalled the CD including the iTunes version 4.
Help!
Sony Vaio Windows Vista

Getting existing wireless solution working with Windows 7 client

Similar Messages

Maybe you are looking for