HT4571 problem! connecting 3G network with new Ipad (verizon)

device: new Ipad verizon, 16gb
problem: I got the device from US and I never activate it's original Verizon sim card yet. I tried to use a 3G data sim card outside US.
              the dvice get antenna and bring the carrier name on top corner also say 3G beside it.
              but when I try to use safari for browsing the net, it says : " could not activate cellular data network"
              how can i fix it?
              my carrier says the sim card is activated and working (the 3G sim i mean not Verizon)
any suggestion?

Why are you using Windows print sharing with your nice network printer? This mode only supports printing, not scannning or faxing. The better way to do this is to attach the printer to your router with Ethernet or wirelessly so that all PCs (regardless of how they connect) can use all of it's features. Disconnect the USB cable and run the Wireless Setup Wizard (if you want to connect it wirelessly, otherwise, plug the Ethernet cable in to the printer and router) from the front of the printer (Setup >Network menu), then run the HP software to "Add a Device" on each PC.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Problems connecting IOS devices with new Comcast wireless cable modem?

Just installed a new cable modem from Comcast, it is their new high speed unit manufactured by Cisco. of the three IOS devices I've tried, all running currently the OS , are having problems connecting with the error "Unable to join the network " Home-XXXX" if you keep asking it may connect but I have to be persistant. My Devices are iPad 4 g Retna with 30pin connection, an iTouch ,latest model with camers, and current iPad mini. is it me or the modem?

You have probably already solved this issue, but I would hide the comcast wifi network (dont broadcast ssid) and make the password very hard. Make sure that put it on channel that does not conflict with your Airport Extream.
Connect the Comcast modem/router to the airport extream's wan port with an ethernet cable.
Comcast usually ships the DHCP enabled. Use the comcast DHCP server for your airport.
Configure the airport extream to "create a network" set the network to "bridge mode".
Name your network, broadcast the ssid all on the airport. Now all your devices will connect everytime. Use can use the Comcast "private" wireless network for maintenance, etc.
Just some thoughts... good luck

Cannot connect to wifi with new iPad or iphone5

Everything was fine before ios6 update? Do I need a new router or what? This is very frustrating and it seems apple is doing nothing! Not acceptable!

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Problem connecting bluetooth headset with New MacBook Pro and OS 10.10. MBP did not recognise the headset (Platonic BeatBack Go2)

I have been using Plantronic bluetooth head set (BackBeat GO2 produced by Platonic) without any problem with my old Macbook under OS 10.6.8. When I bought a new Macbook Pro Retina (MBP) loaded with OS 10.10 and a MacAir (MA) also loaded with OS 10.10, I have problem connecting the head set. Both MBP and MA could not recognise the head set. Can some one help ..... I can't do without the bluetooth head set...

I have been using Plantronic bluetooth head set (BackBeat GO2 produced by Platonic) without any problem with my old Macbook under OS 10.6.8. When I bought a new Macbook Pro Retina (MBP) loaded with OS 10.10 and a MacAir (MA) also loaded with OS 10.10, I have problem connecting the head set. Both MBP and MA could not recognise the head set. Can some one help ..... I can't do without the bluetooth head set...

Problem printing thru network with new 8500A all-in-one

I installed a new Officejet pro 8500a plus on my network. I have 3 computers on the network set up this way: DSL modum connected to Linksys router, all 3 computers connected to the router, PRINTER is connected to main COMPUTER and other 2 computers print through the main computer.
I installed the printer sucessfully and ran the HP network wizard following the dialogs for connecting through another computer. I can print, and fax fine from the main computer but not from the other computers. I configured the printer as "shared" on the main computer and the other computers recognize the printer and set it as the default printer. But when I try to print form the other computers nothing happens. When I go into control panel - printers - properties - ports on the main computer, the printer is listed as USB002 but when I click on "configure" I get "An error occured during port configuration. This opperation is not supported".
Main computer is running Windows Vista with current updates
Other computers are running Windows XP SP2 with current updates.
Any ideas?
Thanks, Jim
This question was solved.
View Solution.

Why are you using Windows print sharing with your nice network printer? This mode only supports printing, not scannning or faxing. The better way to do this is to attach the printer to your router with Ethernet or wirelessly so that all PCs (regardless of how they connect) can use all of it's features. Disconnect the USB cable and run the Wireless Setup Wizard (if you want to connect it wirelessly, otherwise, plug the Ethernet cable in to the printer and router) from the front of the printer (Setup >Network menu), then run the HP software to "Add a Device" on each PC.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Wifi problems with new ipad

I'm trying to learn how to correct wifi problems with new iPad. It is the wifi only, 64GB model. I want to be able to use it at work, where we have a great wifi network. I can usually connect to our network with no problem, but after an hour or so my iPad loses the network. When I try to reconnect, I see that the network is showing full strength reception, but I get the error message from the iPad that I am "Unable to join" the network. My iPhone connects to the same network seamlessly, as do all of the other iPhones of my co-workers and the older generation iPads that some of our staff has.
At other locations, I typically have no problems (home, apple store, etc.) but I have had the same situation pop up at a coffee shop where I could see that there was a wifi network available, but I could not join it even though it was the shop's free wifi.
I have tried turning the iPad off, turning off wifi and turning it back on again, and forgetting the wifi network in question. I can't think of any other methods that are available to an end user to correct the problem.
I have already gone to the Apple store to swap out the unit, and the newer one is having the same symptoms.
Can anyone offer any advice here? This is quite frustrating.

No problem! Have a read at this most interesting article which has special significance as regards your models!
http://edition.cnn.com/2012/04/05/tech/gaming-gadgets/ipad-wi-fi-issues/index.ht ml
However, I attach an extract from another thread for your perusal. You can disregard any suggestions/links you have already explored -
created by Texas Mac Man in Using iPad - View the full discussion
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom ;)

I can no longer connect to the available wi fi networks with my ipad 1

For some reason I can no longer connect to the available wi-fi networks with my ipad...help

If no change after powering your iPad off and on and/or after a reset which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release, try resetting network settings on your iPad at Settings > General > Reset > Reset Network Settings. This will erase all saved wi-fi network settings from your iPad. This will require rejoining every wi-fi network your iPad has access to when returning within range of such a network.
If no change after this, try restoring your iPad with iTunes as a new iPad or not from your iPad's backup.
If no change after restoring as a new iPad, your iPad has a hardware problem.

I have just converted from PC to iMac. Yay. But pls be nice to me; I am back to newb! Running Lion. Have connected a Time Capsule as both a backup and WAP. I want to be able to join the network with my iPad, iPhone, iPod to print. How can I do this?

Can I do this using the Time Capsule. I am not tech, so bear with me. Can I get the iPad to connect wirelessly to the TC, which connects wirelessly to the Canon MP495? Or, can I connect/network the iPad to the iMac to print?
Either way, or if there is any other solution, I would appreciate if someone would walk me through it, or point me to a plain-speaking resource.
Thankyou.
Actually, one more: I would like to connect my HP laptop as well. I have heard this is not simple, but possible.

You can create a wifi network with your TC, and you can join this network with your iPad. However, your printer does not support the AirPrint protocol, so you will not be able to print from your iPad, unless you load additional software.
These are the steps:
1. (You may have completed this step already) Set up your TC to create a wireless network. You can do this from AirPort Utility on your Mac or from the AirPort Utility App on your iPad (free download from the App Store).
2. From your iPad, go to settings / wifi and join the network.
3. Download the Canon iPhone App from the App store on your iPad
4. You can now print photos from your iPad to your Canon printer.
If you want full functionality, (not just photos), there is software for your Mac that makes your printer available to your iPad through AirPrint (Printopia). The downside is, you have to purchase it, and you have to have your Mac running when you want to print from your iPad.
Good luck!

I can not connect the wi-fi network with my iPad Air

I can not connect the wi-fi network with my iPad Air

Hi there maurobats,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
-Griff W.

HT4972 can't connect to network with linksys e2500

Can't connect to network with linksys E2500. Can anyone help me?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I am unable to join my existing wireless network with new AirPort Express

I am unable to join my existing wireless network with new AirPort Express.
I am using a DLink DI-524 Router, Windows 7 (64), and the AirPort Express.
AirPort Utility will not recognize the AEX wirelessly, it will only recognize it when it is connected by Ethernet. I can then configure the AEX and verify that the settings stick once disconnected and then reconnected. However, even after that, it will not recognize the AEX once disconnected from the Ethernet cable.
I followed the suggestions of several other threads on these forums. But I am unable to get the AEX to work.
Any suggestions? Thanks in advance.

Welcome to the discussion area!
It's almost always a security setting that causes problems when the Airport Express (AX) tries to join a third party wireless network. The AX usually does not "join" correctly and that's why you can't see it on your wireless network using AirPort Utility.
Using an ethernet cable is still the more reliable way to configure and adjust the AX, but if you are want to try to configure it using wireless, you must return the AX back to factory defaults as follows:
Power down the AX
Hold in the reset button +and keep holding it in+ as you plug the AX back in to power
Release the reset button after 10 seconds
When it is set to factory defaults, the AX broadcasts a wireless signal with a network name like "apple network xxxxxx" where the "x's" are either letters or numbers. You must look for this network by clicking on the fan shaped Airport icon at the top of the screen. If you don't see this network, then click Join Other Network to search that way. Unless you connect to this network, you will not be able to configure the AX using wireless.
Do you know the exact security type that your D-Link router is using? That is the key element in the process.
Open AirPort utility, click Manual Setup
Click the Base Station tab to establish a name for the AX, device password and adjust time zone settings
Click the Wireless tab
Wireless Mode....Join a wireless network
Wireless Network Name...must exactly match your D-Link wireless network name
Enable ethernet clients if you want the port to be active (your D-Link must be compatible with ProxySTA for this to work)
Wireless Security...exact setting of the D-Link network. WEP security causes a lot of issues. Try to use WPA/WPA2 Personal, which is far more secure.
Wireless Password...must match the D-Link network
Click the Music icon to enable AirTunes
Click Update to save settings
Any luck?

TS1398 Can't connect to hotspot with my iPad, picks it up but unable to connect. Any sugestions?

Can't connect to hotspot with my iPad, picks it up but unable to connect. Any sugestions?

When Access Connections fails to connect it asks if I want to configure the network and there's a bunch of settings. Connection type: infrastructure or Adhoc, Wireless security type "use static WEP keys", "Use Wi-Fi protected Access - Pre Shared Key (WPA-PSK)" - I choose it and under Properties there's more options. Access point authentication, WPA-PSK or WPA2-PSK; I've tried it both ways. Data encryption: TKIP or AES, I've been using TKIP. Under Pre-Shared Key, there's the only box I see to enter a password, so I enter the password there.
Chances are pretty good that the problem is the network configuration of your PC and not the AirPort Extreme Base Station (AEBS). What configuration options you choose will depend on how you set up the AEBS's wireless network, but the following can be used as a guideline:
o Connection Type: Infrastructure
o Wireless Security Type:
AirPort Setting = PC Setting
o WEP = WEP
o WPA Personal = WPA-PSK w/TKIP
o WPA2 Personal = WPA-PSK w/AES

TS3899 Cannot send email with new iPad air. Works fine with old iPad and iPhone.

Cannot send email with new iPad air. Works fine with old iPad and iPhone. I have deleted account and reinstalled.

Thanks. I got the problem fixed. Spent time with the Apple folks and was kicked up to a senior advisor. It seems the problem was with my internet provider - Tmie Warner. Remember I could use the old ipad and the iphone to send mail. I checked all the specifics between the three units. It seems that TW is changing over from the RR.com to TWC.com. Since the new ipad air was just set up, it fell under the new TWC mail specifics.

How do I connect a network printer to ipad 3. I have a HP LaserJet P2035n. It is a network printer. Not Wireless.

How do I connect a network printer to ipad 3. I have a wireless router on my LAN. I have a HP LaserJet P2035n which is a network printer and it is connected to the LAN. The printer is not on the AirPrint list. The printer is not wireless.

Hello,
I am using a Mac with this router. Any ideas how I can set it up to print wireless. Im not a tech person so this gets confusing for me sometimes.
Thanks!

I am unable to join my own wifi network with new iphone 5

I am unable to join my own wifi network with new iphone 5. It has the latest software downloaded too. Keeps saying unable to join network after I type in the password. All my other devices are able to join but just not the iphone. I've called Verizon and my internet provider and they have been unable to help. I had no problems with my iphone 4 with this very same issue. Please help or I'll be forced to return this phone. I have 13 days left.

Try power-cycling your router (unplug for 15 seconds, then plug back in), then on your phone go to Settings>General>Reset and tap Reset Network Settings, and try joining your network again. Note: resetting network settings will erase passwords for previously joined networks on your phone.

HT4571 problem! connecting 3G network with new Ipad (verizon)

Similar Messages

Maybe you are looking for