HT4623 how can I get into my Ipad when I have forgotten my passcode

Someone in the family has changed the passcode to my Ipad - It could have been me - but no one remembers doing it. We are now locked out of the Ipad. How can I get back in!

Connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808

Similar Messages

  • HT1349 How can i get into my iPad when i forgot my password?

    How can i get into my ipad when i forgot my password?

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

  • How can i open my iphone 4s when i have forgotten my passcode ? without deleting everything on it

    how can i open my iphone 4s when i have forgotten my passcode ? without deleting everything on it

    Put it in recovery mode to restore, you'll get the option to reset the passcode during this process.
    iOS: Wrong passcode results in red disabled screenand iOS: Recovery mode
    If you have previously synced your device with iTunes
    You may be able to reset the passcode by restoring the device.
    Connect the device to the computer with which you normally sync and open iTunes.
    Note: If iTunes prompts you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes", below.
    Right-click the device in the left column and select Back up.
    When the backup is complete, select Restore.
    When finished, restore from your most recent backup.
    If you are using Find My iPhone, you can use Remote Wipe to restore your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode.
    Message was edited by: Ingo2711

  • How do i get into my phone if i have forgotten my passcode

    I have chnaged my passcode on my phone and I cannot remember it, what should i do?

    If you cannot remember the passcode for the Screen Lock, you will need to Restore the device...
    1)  Connect to iTunes on the computer you usually Sync with and Restore...
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download

  • How can I get into my ipad if I don't have the password or the original computer to reset or resynch? It's locked now since the passwords I thought are not correct. What can I do?

    How can I get into my ipad if I don't have the password or the original computer to reset or resynch? It's locked now since the password I thought was set is not correct. What can I do to get back in or reset? Thanks

    http://support.apple.com/kb/ht1808

  • I forgot my passcode, how can i get into my iPad?

    I set a passcode and cannot seem to remember it.  How can I get into my iPad without resetting it?

    Force iPad into Recovery Mode
    1. Turn off iPad
    2. Connect USB cable to computer only
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times.

  • How can i get into my ipad if i forgot my password

    how can i get into my ipad i forgot my password?

    If you've forgotten your passcode, then if you connect it to the computer that you normally sync to you should be be to reset the device and then re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808

  • How can i get into my iPad?

    How can I get into my iPad?  I can turn it on, but the keyboard won't pop up for me to enter my passcode

    Glad that helped.
    Wow, the thought of an iPad as a frisbee is ugly indeed.
    Enjoy your iPad and I hope it continues to work successfully for you.

  • How can I get into my i-pod if i forgot the passcode?

    How can I get into my i-pod if i forgot the passcode?

    connect your ipod to your mac and the summary page on itunes will show up. On the middle of the page it will say restore, click on it follow the prompts and you should be good:)

  • Forgot my passcode Ipad is Disabled, how can I get into my iPad?

    Forgot my passcode iPad Air is Disabled, whay can i do to get into my iPad? I have not synch the device.

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • HT4061 how can i access my iPhone 4 when I have forgotten passcode

    my grandson forgot his passcode and doesn't want to loose what he has on it, how can we get into the phone

    You don't if you forget. That's what passcode is for to protect without the correct passcode.
    Forgot or Wrong Passcode
    http://support.apple.com/kb/HT1212

  • How can I get into my iPad touch without my password?

    My daughter has put a password on her iPod touch by mistake and now we can't get into her apps or settings. Anyone have any suggestions for us?
    Please help!  Thanks.

    Place the iPod in recovery mode and then restore the iPOd via iTunes on  its syncing computer. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • How do you reset your ipad when you have forgotten your passcode

    I have forgotten my passcode to my ipad 4th generation ... I need help?

    Here's a link to what to do when you forgot your passcode.
    http://support.apple.com/kb/HT1212

  • How do you get into your ipad when forgotten the passcode?

    I have forgotten my main passcode help?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How can I erase data on iPad when I have a dead screen?

    I have a 32g 3g original version iPad.  The screen is dead but I when I hook up to iTunes I can still see my data and sync etc. so the insides are working fine.  I want to permanetly errase all the my personal data and settings.  How can I do that when I can't see the ipad screen.  A simple reset from iTunes will not do that will it?

    You can restore it "as new device".  Plug it into iTunes, press and hold the on/off and the home button at the same time until iTunes pops up saying it has detected a device in recovery mode.  The restore it as a new device - that will wipe everything off it and return it to essentially the way it was once activated right out of the box.

Maybe you are looking for

  • Adobe muse not working!

    i have paid for the month to month with adobe muse but when click the download button NOTHING happens!!! this has been for 2 days now and NO ONE can help over the phone. ALSO, how is there NOT an option to make an image larger on your website? when y

  • Unable to log in to iCloud

    Strange issue... Recently I am unable to log in to iCloud from my computer at work. In addition, my calendar and contacts no longer sync with my iCloud. Instead, I am getting an error message stating that 'iCloud encountered and error while trying to

  • What is difference between Documanage and Documaker?

    Guys.. We are new to ECM, one of our customer is using both Documaker(Distributed) and Documanage for their vendor document management. So just I would like to know what would be the reason to use both? Instead can they use only documaker? Thanks in

  • Upgraded to 7.3.1 and audio files are corrupted -- missing vocal tracks

    Just upgraded a work computer to itunes 7.3.1 and my music files are now playing without vocal tracks and very poor audio quality. it's a cheapo work computer, HP with a celeron processor. Any suggestions?

  • 2:30 QuickTime Movie in Presentation

    Greetings, We are using Keynote 08 as an electronic kiosk. When we add the movie it will not play the entire 2:30 before transitioning to the next slide. Only see an option for :60...how do you instruct Keynote to play the entire 2:30 QuickTime movie