HT4623 Iphone 5 is not working. Why the black screen?
Why would Iphone stop working suddenly? Just a black screen. Is there anyway to reset?
Hold down the home button and power button at the same time until you see an apple appear on the screen, then you can let go.
Similar Messages
-
My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back
I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!
-
My facetime on iphone 4 is not working after the update to IOS7
Hi guys, can you help me about my problem? My Facetime on Iphone 4 is not working after The update to IOS7 Thanks xxx
Hey Junie1387,
Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/TS3367
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
You may also want to reset your network settings:
Settings > General > Reset > Reset Network Settings.
Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
Thanks,
Matt M. -
Videofunction on iphone 4 is not working after the update to IOS7
Hi. The videofunction on my iphone 4 is not working after the update to IOS 7:
Anyone else experiencing the same problem?
Anyone with solutions?
Thanks!Hey Junie1387,
Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/TS3367
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
You may also want to reset your network settings:
Settings > General > Reset > Reset Network Settings.
Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
Thanks,
Matt M. -
GUYS MY iPHONE 4 IS NOT WORKING WITH THE SIM CARD IN ZIMBABWE,HOW DO I UNLOCK IT?
GUYS MY iPHONE 4 IS NOT WORKING WITH THE SIM CARD IN ZIMBABWE,HOW DO I UNLOCK IT?
Only the wireless carrier that the iPhone is locked to is capable of unlocking it. You'll have to ask them if they will unlock it. Some will, some won't.
Hope this helps -
After I installed mountain lion my back button frequently does not work because the prior screen does not appear iunder History. Apple tech support was not able to fix the problem. Does anyone have any suggestions?
lbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken! -
Cached credentials are not working on the lock screen (Windows 7)
Hello all,
We are having a difficult time trying to troubleshoot a problem with credential caching seemingly not working on the lock screen for our laptop users. Users are instructed to logon to the laptop while connected to the domain to cache their credentials. The
user then leaves the network, and is able to log in to the laptop using cached credentials. The laptop locks either due to a manual lock, or due to an inactivity timer. The user tries to relog and is presented with the error “no logon servers available to
service the request.” Users are reporting the problem from both home and public networks. We have been able to recreate the issue by logging on the laptop while in the office and setting our internal wireless network to manually connect, and then simply clicking
start > shutdown arrow > lock. Many users have reported that they were able to get back into the laptop after a hard shut down, but would be unable to log in again if they returned to the lock screen. One user has reported that selecting other credentials
> switch user > other user while on the lock screen and then entering in his DC credentials would allow him to get back into the laptop. I was unable to recreate this workaround on our test machine. I also tried to logon using the switch user account
with the “.\username” method to see if that would look for cached credentials. One user has reported that he was unable to hard shut down the computer to get back in. He also reported that he tried to pull the battery and give it time before trying again.
We have set the value for “Interactive logon: Number of previous logons to cache” to 50. The status of “Interactive Logon: Require Domain Controller to unlock workstation” is disabled. We have tried to turn the Wi-Fi switch off and then back on while on
the lock screen. Error logs that we think are related to the problem include – Event ID:5719, NETLOGON and Event ID:4343, NlaSvc error 0x4C6 and error 0x51
I have a slightly sinking feeling it has something to do with NLA thinking that they are connected to a domain while on the lock screen, but this is pure speculation. Thanks for reading my post and any potential solutions are greatly appreciated!I'd try them over here.
Windows IT Pro forums on TechNet
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
When I swipe up from the bottom of the screen to use control center I am not able to use the music controls for music or podcasts and music controls do not work on the lock screen either is anybody else having this problem???????
Not really sur easy you would be having that problem. Mine works. You might try RESET DEVICE
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost). Then try again and see if it makes a difference -
Has anybody experienced the iPhone off switch not working all the time.
I have an iPhone 5, it's about 16 months old and it has experienced an annoying issue. The off button does not work all the time, sometimes I have to press it multiple times and other times it just works. The worst case is when it does not work at all, very frustrating. I didn't expect this type of issue for a phone that is not even a year and a half old.
I did some searching on the internet and there are 2 schools of thought, the first is that this is a hardware fault and Apple know about it but won't admit it because it would cost them too much to repair/replace phones with the issue. The second school of thought is that it is a software issue and a backup/reset/restore will fix it; I tried doing this but it did not resolve the issue.
Further digging seemed to suggest that it was really a hardware fault and the only option was to get a refurb from Apple for a ton of money, not cool.
Anyway, if anyone has any more information that could help me resolve this issue I would greatly appreciate it.
//*eggbox23@diesel vdub, thanks for your suggestion, I setup an appointment with the Genius Bar and found out in about 5 minutes that everything I have read up on so far is true.
Firstly the technician admitted that there is a sporadic fault on the iPhone 4s and iPhone 5 switches, something to do with the design of the switch that included a rubber element that rolls up (whatever that means) and causes the switch to fail. He then indicated that the iPhone 5s does not have the issue because the switch has been completely redesigned.
Since I was stupid enough to not take out the extended warranty the only options he gave me were to purchase a new phone or to get a refurb for $269, not cool. Why would anyone think that a phone would not work correctly for 2 whole years when the phone only cost about $600!
Since I have about 7-8 months left on my phone contract I am not prepared to pay for either option. I find it amazing that a phone can develop this type of issue in such a short time and then expect the customer to pay for their failures. Apple supposedly sells a very high quality product for a very high price, looks like they have taken a step back from this philosophy.
I am disappointed in the options that he gave me (I don't blame the technician) but I suppose I expected more from Apple in terms of quality and service.
//*eggbox23 -
I've updated my iphone 4 to ISO 5. I could not connect to icloud yet however does this expalin why some of the features of ISO 5 are not working like the camera lock screen feature?
Thanks
Cto see the camera icon, double-click the home button when you are on the lock screen. this will show the music controls and the camera icon. double click the home bgutton again to close them.
-
My new iPhone 4S speaker not working why?
my iPhone 4S iOS 7.0.3,model MF266HN/A,8GB one speaker not working why? What can I do?
All iPhones are mono. Stereo is only available on Earphones.
Bottom left is mic and right is the speaker. -
My iPhone 4S suddenly quit working. The screen will only show when it is plugged into power. It will not connect with my service provider. Its like the phone has been reset or something.
Sounds like you need to bring the phone to Apple for evaluation.
-
i can´t sync my music to my iphone beacause it do not appears on the itunes screen, i have do all the itunes support but it doesn´t help me.
Please Click on the 'Print Screen' for better view.
-
Does not return to the Home screen after you press the Home button
The buttons do wear out, and when they do you'd need to get the phone serviced.
-
I use Safari Mt Lion and when I view Bookmarks, the entire list of bookmarks show uo but on the display portion only the black screen witht the Safari icon shows while other bookmarks show the actual photo of what that bookmark is so unless I click on the bookmark on the blank ones I can not see what it is, it is inconvient because I have hundreds of bookmarks and I can not remember what I was bookmarking it for unless I can see it
Hi
I understand - sorry to have missed your point before now.
Some sites don't display those previews in safari - secure pages (https) for one, and also sites that are redirected.
Taking the example in your screenshot, the site http://fabulouslyartsy.blogspot.com/ actually redirects to http://www.fabulouslyartsy.com/ and Safari (rather annoyingly) doesn't 'follow' the redirection & show the appropriate preview. See the image below - the blank preview is for the blogspot address, and the one visible to the right is from going directly to the site.
Maybe you are looking for
-
Phone switches to husbands apple id when I go to update apps.
My phone says I have updates, but when I go to update them it has switched to my husband's apple id and wants his pw. We share a comp but have different user accounts to keep our itunes seperate. Everything else is signed in under my apple id. HELP P
-
DYNAMIC_CALL_FAILURE - ABAP Proxy Inbound
I have the following error when I try to test a proxy interface with the data coming into ECC 5.0 System. <b><?xml version="1.0" encoding="UTF-8" standalone="yes" ?> - <!-- Call Inbound Proxy --> - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Messag
-
HT1420 Re-installing on an older computer
I got a virus on the computer where itunes is installed. I had to do an complete re-install of Windows. When I click on the itunes icon it states I need to uninstall and re-install itunes. Will I loose music loaded from my personal cds?
-
hi, i bought an ipod 5th gen 16gb and want to get the 32 gb instead, if i break my ipod will my insurance allow me to get the 32gb with additional fee??
-
I am very new to java, i am taking it as a course for my IS major. We have an assignment to create a program that takes in two coordinates and uses them to calculate various distance formulas. I was wondering if there was a way to make it so that two