HT4654 setting proxy websites in osx 10.8.2

setting proxy websites in osx 10.8.2

Thank PapaSmurf (?)
My problem was that in Sound settings was not indicated the Head-Set device, although existing, but BoomDevice, that greatly enhances the sound level. So what I had to do was first change from BoomDevice to the Head-Set, and then I changed down to Internal speaker and then again chose BoomDevice. That way, I could turn off the Head-Set without getting the error message, and yet maintain the internal speaker through the BoomDevice.
I had a feeling that I had to do something with the sound settings and your reply made me experiment and succeed! Thanks once again!

Similar Messages

How we set up multiple websites on OSX Server

BACKGROUND
After fiddling and futzing around for weeks (actually since last year) I've finally figured out how to set up multiple websites (virtual sites) using one port and one IP address. While there seems to be lots of discussion on this topic, it seems that the basic assumption is that one knows everything about websites, DNS and all that stuff, which I do not.
When our network was originally established the engineer set up a wiki and also configured webmail, so we had two sites, one secured for mail and the other open for Calendar and the wiki. We were not hosting any websites locally because our school website is hosted by a company in New England.
This year I wanted to set up websites for teachers and students. As great as the wiki is, there are some things it just can't do as well as a website. So I figured if I set up the sites teachers could link back and forth from one to the other. In addition kids could now start to use a real website instead of the cobbled together file mess I had when we ran a Windows network. Also iWeb is a much more accessible tool than FrontPage.
SERVER SIDE:
Snow Leopard Server - 10.6.4
There are two - actually three pieces if you want your iWeb clients to connect to the server: Server Side Web Services, DNS and, in my case, FTP.
================================================ SERVER SIDE - WEB SERVICES
If you haven't turned on Web services, you'll need to open Server Admin and do that. If you don't know how to set up web services - just reply and I'll step you through that as well.
Once web services are set up and turned on, you'll see it listed under your server’s name in the Server Admin sidebar. Click on "Web" and then click on the "Sites" tab at the top of page. This is where you list all your sites.
Click the plus button and enter the fully qualified name of your site, for example: "students.myschool.org". Don't use the defaults here (no name) - that's what got me in trouble before. BE SPECIFIC!
You'll be looking at the "General" tab (the other tabs, "Options", "Realms", etc. we'll deal with in a second).
On the "General Tab", the default IP address ("any") and port (80) is just fine. We'll run everything over port 80. (Apache figures all the virtual site stuff out - you don't need your rocket science degree for that.)
"Web Folder:" is important because this is how you'll "segment" your websites. While I would NEVER do this again, we have a solid state hard drive for the OS and a RAID array for our data files. IF you have that, make sure you do NOT use the default "Web Folder" because it will store all your files on your solid state drive. There may not be enough room, over time, on that drive. I've not experienced it yet, but it's my understanding that if the drive fills up, the server shuts down.
I store my web sites on a folder on the RAID array.
Everything else on that tab can be left as the default. (Just make sure that you have an "index.html" or "index.php" file in your web folder root, but iWeb will take care of that for you.)
I would put in your email address in the "Administrator Email:" field.
Under "Options" you really don't have to put anything. I've tested making websites with iWeb and it doesn't appear that anything needs to be checked.
Nothing needs to be entered in "Realms" as well from what I see working w/ iWeb.
The defaults in "Logging" are fine.
You can leave "Security" alone, but we do have a (self-issued) certificate listed for our webmail site.
"Aliases" is important. Under "Web Server Aliases" you enter how you want the site to respond to when users type in a URL in their web browsers.
When our web server was initially set up the engineer set up "wiki.myschool.org" on port 80 and "mail.myschool.org" on port 443. In the aliases section was nothing but a "*" (the wildcard character). That means, from what I can figure out, that the webserver will respond to these sites regardless of what is typed in the URL. (Well, something like that - point is, if you create OTHER websites, you'll NEVER get to them because the wildcard character in the "Aliases" section, in effect, grabs those web requests and redirects them to the sites that are already there.
In my case I deleted both of those wild card characters. For my "wiki.myschool.org" site, I entered "mail.myschool.org". That means if you type EITHER "wiki." or "mail.", go to the site that’s stored in the “Web Folder” we set up when those sites were created.
For "mail.myschool.org" I just DELETED the wildcard character. I wanted that site (since it was secured) only to respond to "mail." - nothing else. (You're not going to that secured site for any other reason than to get your mail.)
"Proxy" can be left blank. Have no idea what that does. As time permits I'll do some research and figure out what it's used for.
"Web Services" is if you want to provide any MORE services to this particular site. Most likely you'll want to uncheck all the boxes. For our "wiki." site, we have checked "Wikis", "Blogs", and "Calendar". For our "mail." site we have those checked PLUS "Mail".
I would create a separate "Web Folder" for each of your sites. I don't know if that's a requirement but for housekeeping purposes, I would keep the sites separated. And I SUSPECT that it's "best practice" to separate your wiki from your other websites.
SERVER SIDE - DNS
OK...now you have to make your site reachable and the only way to do that is to set up DNS so that folks don't need to type in the IP address of your web server. You need to set up DNS inside your network and, if you want folks in the outside world to reach your website, you'll need to set up an external DNS as well. I'm going to cover INTERNAL DNS - if you don't know how to set up EXTERNAL DNS - reply or email me and I'll post those instructions.
Most likely you have already created Zones for you network...all you really need to do is create "Aliases" so that when you type "students.myschool.org" your web browser will know that site resides on IP address XXX.XXX.XXX.XXX.
If you've set up Zones then you already have a "Machine" setting that translates your server’s name to an IP address and vice versa.
All you need to do is create an "Alias" (CNAME) record for, in this case, "students". You’ll see the choices for types of records when you click the "Add Record" button.
There are only two fields to configure for a record: "Alias Name" - in this case "students" and "Destination" - in this case "servername.myschool.org". (You've already entered a machine record that says "servername" = 192.168.1.x.)
That's it for Internal DNS.
SERVER SIDE - FTP
Now you have to get iWeb to communicate with the webserver.
There are only three ways iWeb will communicate with webservers: MobileMe, Local Folder and FTP Server.
Local Folder is really only practical if you want to host a website on a laptop (I was blown away initially when I found out that all Macs had a built-in web server - how neat is that?). I think there are some very cool things teachers could do with configuration, and, of course, you wouldn't need to set up any web services on the web server, but that's for another discussion. You need to set up FTP services on the web server.
Turn on and enable FTP on your webserver.
You can leave the defaults for "General", "Messages" and "Logging". "Advanced" is the only thing you want to set. I set "Authenticated Users See:" to "Home Folder Only". I set the "FTP Root" to the same root folder in which I plan to store my web sites (/VOLUMES/RAID Array/WebServer/Documents). This setting sets that folder only to be accessible via FTP.
I would suggest returning to your DNS settings and adding one more "Alias". Set "ftp." to point to your webserver. Why? So folks can edit their sites from home (see below).
CAVEAT: If you are running FTP on other servers, make sure that the settings here do not conflict with the settings on the other servers. For example, I'm running FTP on my file server so that my scanners can communicate with it. However, I configure my FTP settings by machine name and NOT "ftp.myschool.org".
================================================
CLIENT SIDE - CONFIGURING iWEB
Now you have to configure iWeb so that it will communicate with your server.
Click on the "Site" icon so that "Site Publishing Settings" appears.
Publishing:
"Publish to:" = "FTP Server"
You can set the "Site name:" and "Contact email:" to whatever you want. But see below!
FTP Server Settings:
"Server address"=ftp.myschool.org (you could also enter in servername.myschool.org or the IP address. However, if you want folks to be able to work on the site from home, you will need to configure external DNS for that. If you use the IP address, you're out of luck for remote access to the site. (You can do it but it's beyond the scope of this discussion.)
"Username" & "Password" should be your user's network login credentials.
"Directory/Path" - this is important. Remember, you set your "FTP Root" to be "/VOLUMES/RAID Array/WebServer/Documents". If you leave this field blank then the website will be dumped into this folder. If you are only setting up one site, that may be OK. However I wanted to set up a "students" site folder, a "faculty" site folder and a separate site for our literary magazine.
THEREFORE: I have, in my ..../Documents folder (on the server), a "students" folder, a "faculty" folder, and a "litmag" folder.
SO...in my "Directory/Path:" field, I have "/faculty". That means the full path to this website is "ftp root/faculty" or "/VOLUMES/RAID Array/WebServer/Documents/faculty" (You don't need a trailing "/" character. iWeb will automatically append the folder for you user depending on what you entered in "Site Name:" in the "Publishing" area.
Website URL:
This is the root website depending on whether it is "students" or "faculty". Since iWeb will append the site name to this root website, I accomplished what I hoped to accomplish in this post (http://discussions.apple.com/message.jspa?messageID=12288561#12288561).
Faculty sites will be @ http://faculty.myschool.org/username. Students @ http://students.myschool.org/username. PERFECT!
iWeb is such a GREAT tool - NOW the kids can start using it!
I want to reiterate that this works for our school but it should work for you as well. There may be better ways to do this but it works for us.
Hope this has been helpful and you won't have to spend weeks trying to figure this all out by yourself!

OK...here's how we did it.
To get access to the website you created from outside your network there are a couple of steps.
First, you have to have a STATIC IP address from your ISP. If you have a T1 circuit, no problem...you usually get a couple of static IPs you can use. However, if you have a cable modem circuit, most likely you have a dynamic IP address which changes when you connect to the internet. Usually a static IP will cost a bit more because the ISP has to go through a couple of steps to set it up for you. But once you have the address, you now have a way for folks outside your network to connect with you.
(I’m also assuming that you use a router of some sort through which traffic flows out to the internet and that you aren’t using connection sharing or something like that.)
The next thing you need to do is have your new static IP address associated with the server on which you are hosting your website. You've probably already done that if your website works inside your network. However, you've associated a private ip (192.168.x.x, etc.) to your web server. That doesn't mean anything to folks on the outside because private IP addresses are just that - private - folks can't access them. (I won't get into VPN because that's a whole other topic.)
The way you associate your new static IP address to your web server is through some sort of dns application from your ISP. For example, we use TierraNet to manage our external DNS information. They have a web interface control panel that is very similar to the DNS interface for XServer. You can create CNAME records (aliases - other ways that folks can access your servers).
Basically you create an "A" (CNAME) record with a fully qualified domain name (e.g. webserver.myschool.org) and point it to your public IP address (XXX.XXX.XXX.XXX) which you just got from your ISP. It's going to take a while (24-48 hours) for this change to take effect. BTW, you can create as many “A” records as you want. For example mail.myschool.com and wiki.myschool.com could point to the same place.
You want to make sure that the fully qualified domain name you enter in the external dns utility matches the name you used when you created your internal dns records on your XServer.
OK...so now folks can get to your domain - but, remember, you have a private network IP scheme between them and you. You now have to tell your router that when web traffic arrives, allow it inside the network and direct it to your web server.
Let's say your public IP address is 205.100.112.50 and your web server is 192.168.0.5.
You have to create, in your router’s "Security Zone" (router companies call them different things) a couple of rules. Usually the first rule is: "Let everything inside the network get out to the web." You've probably already done that if folks inside the network can reach the internet.
You then have to tell the router to allow web traffic (port 80) into your network AND redirect that traffic to 192.168.0.5.
We use AdTran routers and they have a web interface which allows you to write "rules" affecting public and private traffic. Public is folks outside the network, private is folks inside.
AdTran calls them "Security Zones" and you modify those zones with policies.
So my "Policy" would say, in the above example, redirect traffic from my public IP (205.100.112.50) -> to my web server -> (192.168.0.5).
THEN you have to modify this policy with what AdTran calls "Traffic Selectors". You've said, OK, you can get in, but WHAT can get in?
The "Traffic Selector" is written to say: "Permit" "TCP" traffic from 205.100.112.50 only through Port 80. (That's the port that web traffic goes over. If you wanted a secure website, you'd add another traffic selector that opens port 443, for example.)
I'll tell you I'm no genius when it comes to this. I called AdTran and had them configure my router for me. I told them what I wanted done, they remoted into the router and configured it. But then I could go to the web interface and see what they did and then added rules later on when I wanted, for example, to get access to the network via Apple Remote Desktop or VPN into the network on my iPad.
I'd bet that your router has a maintenance agreement that includes this service and if it doesn't it should have.
I did find that I still had issues when I tried to set this up originally and it had to do with the ORDER of the policies. I can’t remember exactly what the issue was, but, effectively one of the policies highjacked traffic before the policy that I wanted got triggered. Simply moving them around in the list fixed that issue. So if you have this set up but still can’t access the site, check the order of your rules.
I don’t know if that helps or not, but I try to think about this stuff conceptually and then get someone to help me with the details. I work with this stuff so infrequently that I forgot how I did something 6 months or a year ago. I’m in the process of creating a wiki for the school which documents all this stuff, but that’s a major undertaking.
Cheers,
John

How to set proxy authentication using java properties at run time

Hi All,
How to set proxy authentication using java properties on the command line, or in Netbeans (Project => Properties
=> Run => Arguments). Below is a simple URL data extract program which works in absence of firewall:
import java.io.*;
import java.net.*;
public class DnldURLWithoutUsingProxy {
   public static void main (String[] args) {
      URL u;
      InputStream is = null;
      DataInputStream dis;
      String s;
      try {
          u = new URL("http://www.yahoo.com.au/index.html");
         is = u.openStream();         // throws an IOException
         dis = new DataInputStream(new BufferedInputStream(is));
         BufferedReader br = new BufferedReader(new InputStreamReader(dis));
      String strLine;
      //Read File Line By Line
      while ((strLine = br.readLine()) != null)      {
      // Print the content on the console
          System.out.println (strLine);
      //Close the input stream
      dis.close();
      } catch (MalformedURLException mue) {
         System.out.println("Ouch - a MalformedURLException happened.");
         mue.printStackTrace();
         System.exit(1);
      } catch (IOException ioe) {
         System.out.println("Oops- an IOException happened.");
         ioe.printStackTrace();
         System.exit(1);
      } finally {
         try {
            is.close();
         } catch (IOException ioe) {
}However, it generated the following message when run behind the firewall:
cd C:\Documents and Settings\abc\DnldURL\build\classes
java -cp . DnldURLWithoutUsingProxy
Oops- an IOException happened.
java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
at java.net.Socket.connect(Socket.java:452)
at java.net.Socket.connect(Socket.java:402)
at sun.net.NetworkClient.doConnect(NetworkClient.java:139)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:402)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:618)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:306)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:267)
at sun.net.www.http.HttpClient.New(HttpClient.java:339)
at sun.net.www.http.HttpClient.New(HttpClient.java:320)
at sun.net.www.http.HttpClient.New(HttpClient.java:315)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:510)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:487)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:615) at java.net.URL.openStream(URL.java:913) at DnldURLWithoutUsingProxy.main(DnldURLWithoutUsingProxy.java:17)
I have also tried the command without much luck either:
java -cp . -Dhttp.proxyHost=wwwproxy -Dhttp.proxyPort=80 DnldURLWithoutUsingProxy
Oops- an IOException happened.
java.io.IOException: Server returned HTTP response code: 407 for URL: http://www.yahoo.com.au/index.html
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1245) at java.net.URL.openStream(URL.java:1009) at DnldURLWithoutUsingProxy.main(DnldURLWithoutUsingProxy.java:17)
All outgoing traffic needs to use the proxy wwwproxy (alias to http://proxypac/proxy.pac) on port 80, where it will prompt for valid authentication before allowing to get through.
There is no problem pinging www.yahoo.com from this system.
I am running jdk1.6.0_03, Netbeans 6.0 on Windows XP platform.
I have tried Greg Sporar's Blog on setting the JVM option in Sun Java System Application Server (GlassFish) and
Java Control Panel - Use browser settings without success.
Thanks,
George

Hi All,
How to set proxy authentication using java properties on the command line, or in Netbeans (Project => Properties
=> Run => Arguments). Below is a simple URL data extract program which works in absence of firewall:
import java.io.*;
import java.net.*;
public class DnldURLWithoutUsingProxy {
   public static void main (String[] args) {
      URL u;
      InputStream is = null;
      DataInputStream dis;
      String s;
      try {
          u = new URL("http://www.yahoo.com.au/index.html");
         is = u.openStream();         // throws an IOException
         dis = new DataInputStream(new BufferedInputStream(is));
         BufferedReader br = new BufferedReader(new InputStreamReader(dis));
      String strLine;
      //Read File Line By Line
      while ((strLine = br.readLine()) != null)      {
      // Print the content on the console
          System.out.println (strLine);
      //Close the input stream
      dis.close();
      } catch (MalformedURLException mue) {
         System.out.println("Ouch - a MalformedURLException happened.");
         mue.printStackTrace();
         System.exit(1);
      } catch (IOException ioe) {
         System.out.println("Oops- an IOException happened.");
         ioe.printStackTrace();
         System.exit(1);
      } finally {
         try {
            is.close();
         } catch (IOException ioe) {
}However, it generated the following message when run behind the firewall:
cd C:\Documents and Settings\abc\DnldURL\build\classes
java -cp . DnldURLWithoutUsingProxy
Oops- an IOException happened.
java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
at java.net.Socket.connect(Socket.java:452)
at java.net.Socket.connect(Socket.java:402)
at sun.net.NetworkClient.doConnect(NetworkClient.java:139)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:402)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:618)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:306)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:267)
at sun.net.www.http.HttpClient.New(HttpClient.java:339)
at sun.net.www.http.HttpClient.New(HttpClient.java:320)
at sun.net.www.http.HttpClient.New(HttpClient.java:315)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:510)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:487)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:615) at java.net.URL.openStream(URL.java:913) at DnldURLWithoutUsingProxy.main(DnldURLWithoutUsingProxy.java:17)
I have also tried the command without much luck either:
java -cp . -Dhttp.proxyHost=wwwproxy -Dhttp.proxyPort=80 DnldURLWithoutUsingProxy
Oops- an IOException happened.
java.io.IOException: Server returned HTTP response code: 407 for URL: http://www.yahoo.com.au/index.html
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1245) at java.net.URL.openStream(URL.java:1009) at DnldURLWithoutUsingProxy.main(DnldURLWithoutUsingProxy.java:17)
All outgoing traffic needs to use the proxy wwwproxy (alias to http://proxypac/proxy.pac) on port 80, where it will prompt for valid authentication before allowing to get through.
There is no problem pinging www.yahoo.com from this system.
I am running jdk1.6.0_03, Netbeans 6.0 on Windows XP platform.
I have tried Greg Sporar's Blog on setting the JVM option in Sun Java System Application Server (GlassFish) and
Java Control Panel - Use browser settings without success.
Thanks,
George

A specific set of websites will not load.

Operating a Time Capsule behind a cable modem, I now find a very specific set of websites (those that I manage) will not load. We had a power outage yesterday which did something to my home network I think.
I have rebooted modem and Time Capsule a number of times. I have tried access from 2 mac mini's, one iPad and one iPhone.
IF I direct connect a mac mini to the modem with a cable, I can access the sites. If I leave the house and work on another wireless network, I can access the sites. I checked the sites from that network -- they are NOT blocking any IP's.
If I try to access the sites through the Time Capsule, I cannot.
I think I just (inadvertently) did a full reset of the Time Capsule -- I had to re-define my network. (Although it seemed to remember some things ... )
SO, I have concluded there is something with the Time Capsule and likely DNS that is preventing my access. I tried simply changing DNS to public DNS servers (like Google) but that did nothing.
Best thoughts on how to overcome this?

Your best bet may be to purposely reset your TC to factory defaults and then set it up again.
One thing to try from within your home LAN to see if DNS or connectivity is a problem is to simply open a terminal and "ping" the IP address of your webserver. If you can ping the webserver by IP then you are able to reach it on the Internet. Then try to ping the webserver by fully qualified server and domain name (i.e. www.example.com). If ping resolves the name to the IP of your web server then you are fine with DNS as well. If either of those basic tests fail to resolve the server and receive a reply, then you indeed have some other issue with your TC or internal network.

Why can't I just right click on the thumbnails and set the websites I want?

I love the thumbnail idea, but why can't I just right click on the thumbnails and set the websites I want?
Why do i have to wait for a recent one to come up?
Of the 9 available, I would like to set 6 to website i can input by right clicking it and leave the rest for the recently visited.
I ho[e you include that feature in your next update.
Thank you
P.S. 2 more issues
1. Firefox is the only browser that always give me trouble attaching files in gmail. I still use firefox for all browsing but for mail attachments, I use others. And yes, I have done the "Clear cookies, reset, reinstall, clear cache, etc etc etc... none worked for more than a few days. no such problem with other browsers.
2. Your new updated search bar (Top right hand corner) is nice but can be very irritating for the following reason:
I like to highlight - copy (a word or phrase) - and paste it in the search bar. was fine with the older version, but now as soon as I right click to past, the menu pops up for me to select a search engine. Very irritating since I have yet to paste the copied word or phrase. I rather paste it and then have the option to click on the drop down menu. If you see this as not something masses would want, please place an option in setting for us to stop the suggestion for search engines coming up automatically when we try to right click in the side search bar to paste.

You can change the order of the boxes on the about:newtab page and drag an item to a different tile to pin it to that position or you can remove a website by clicking the close X to block that URL.
You can drag a bookmark or history item and drop them in a tile on the about:newtab page to pin them and have your own favorites sites showing.
Changes made manually on the about:newtab page are stored in prefs that you can find on the about:config page.
*browser.newtabpage.pinned stores websites that you have pinned to a tile.
*browser.newtabpage.blocked stores websites that you have removed by clicking the X button in a tile.
So you can reset those prefs via the right-click context menu to reset changes made to the about:newtab page.
*http://kb.mozillazine.org/about:config

How to set proxy while deploying a bpel proxy?

Hi All,
How can i set proxy while deploying a bpel process. I'm trying to deploy an async bpel process that requires proxy to be set coz to access one of the xsd file requires to go thru a proxy. I have actually set proxy in the following files, setenv.bat and bpel-install.properties under location soa_home\bpel\bin and soa_home\bpel\system\services\install\ant-tasks respectively. When i try to deploy the process through obant.bat, it compiles file but gives an error while deploying stating that it is not able to access the xsd file. While compiling, the proxy setting is taken from setenv.bat and hence compiles successfully, but while deploying it doesn't seem to take the proxy setting set in bpel-install.properties file. Can anyone help me out as to how i can set proxy while deploying???? I'm using soa suite 10.1.3.3.
The following is the log file of obant execution :
C:\JDeveloper\jdev\mywork\Async\PSFTAsyncCalcClient>SETLOCAL
** OBANT is now deprecated. This will be removed in
** the next release. You should use ANT instead.
Buildfile: build.xml
Trying to override old definition of task customize
pre-build:
validateTask:
[echo]
[echo] --------------------------------------------------------------
[echo] | Validating workflow
[echo] --------------------------------------------------------------
[echo]
[validateTask] Validation of workflow task definitions is completed without errors
compile:
[echo]
[echo] --------------------------------------------------------------
[echo] | Compiling bpel process PSFTAsyncCalcClient, revision 1.0
[echo] --------------------------------------------------------------
[echo]
[bpelc] validating "C:\JDeveloper\jdev\mywork\Async\PSFTAsyncCalcClient\bpel\PSFTAsyncCalcClient.bpel" ...
[bpelc] BPEL suitcase generated in: C:\JDeveloper\jdev\mywork\Async\PSFTAsyncCalcClient\output\bpel_PSFTAsyncCalcClient_1.0.jar
deployProcess:
[echo]
[echo] --------------------------------------------------------------
[echo] | Deploying bpel process PSFTAsyncCalcClient on 10.176.162.42, port 8888
[echo] --------------------------------------------------------------
[echo]
[deployProcess] Deploying process C:\JDeveloper\jdev\mywork\Async\PSFTAsyncCalcClient\output\bpel_PSFTAsyncCalcClient_1.0.jar
BUILD FAILED
C:\JDeveloper\jdev\mywork\Async\PSFTAsyncCalcClient\build.xml:79: A problem occu
red while connecting to server "10.176.162.42" using port "8888": bpel_PSFTAsync
CalcClient_1.0.jar failed to deploy. Exception message is: ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "P
SFTAsyncCalcClient" (revision "1.0"): BPEL validation failed.
BPEL source validation failed, the errors are:
[Error ORABPEL-10902]: compilation failed
[Description]: in "bpel.xml", XML parsing failed because "undefined part element
In WSDL at "http://localhost/PSIGW/PeopleSoftServiceListeningConnector/ASYNCPSFT
CALC.1.wsdl", message part element "{http://xmlns.oracle.com/Enterprise/Tools/sc
hemas/PSFTCALCRESPONSEMESSAGE.V1}PSFTCalcResponseMessage" is not defined in any
of the schemas.
Please make sure the spelling of the element QName is correct and the WSDL impor
t is complete.
[Potential fix]: n/a.
If you have installed a patch to the server, please check that the bpelcClasspat
h domain property includes the patch classes.
at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.j
ava:285)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(Deployment
Manager.java:862)
at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(Deploymen
tManager.java:728)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainMana
gerBean.java:445)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.
java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoin
PointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationC
ontextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSIntercept
or.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationC
ontextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASIntercep
tor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:646)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterce
ptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationC
ontextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxReq
uiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationC
ontextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSIntercept
or.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationC
ontextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.ja
va:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(Stateless
SessionEJBObject.java:87)
at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:
319)
at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:3
41)
at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.jav
a:65)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispat
cher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequ
estDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandl
er.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler
.java:453)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandle
r.java:221)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketRead
Handler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAc
ceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHa
ndler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSo
cketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableRes
ourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Total time: 44 seconds
C:\JDeveloper\jdev\mywork\Async\PSFTAsyncCalcClient>obant >>C:\log.txt
BUILD FAILED
C:\JDeveloper\jdev\mywork\Async\PSFTAsyncCalcClient\build.xml:79: A problem occu
red while connecting to server "10.176.162.42" using port "8888": bpel_PSFTAsync
CalcClient_1.0.jar failed to deploy. Exception message is: ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "P
SFTAsyncCalcClient" (revision "1.0"): BPEL validation failed.
BPEL source validation failed, the errors are:
[Error ORABPEL-10902]: compilation failed
[Description]: in "bpel.xml", XML parsing failed because "undefined part element
In WSDL at "http://localhost/PSIGW/PeopleSoftServiceListeningConnector/ASYNCPSFT
CALC.1.wsdl", message part element "{http://xmlns.oracle.com/Enterprise/Tools/sc
hemas/PSFTCALCRESPONSEMESSAGE.V1}PSFTCalcResponseMessage" is not defined in any
of the schemas.
Please make sure the spelling of the element QName is correct and the WSDL impor
t is complete.
[Potential fix]: n/a.
If you have installed a patch to the server, please check that the bpelcClasspat
h domain property includes the patch classes.
at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.j
ava:285)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(Deployment
Manager.java:862)
at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(Deploymen
tManager.java:728)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainMana
gerBean.java:445)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.
java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoin
PointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationC
ontextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSIntercept
or.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationC
ontextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASIntercep
tor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:646)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterce
ptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationC
ontextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxReq
uiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationC
ontextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSIntercept
or.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationC
ontextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.ja
va:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(Stateless
SessionEJBObject.java:87)
at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:
319)
at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:3
41)
at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.jav
a:65)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispat
cher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequ
estDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandl
er.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler
.java:453)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandle
r.java:221)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketRead
Handler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAc
ceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHa
ndler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSo
cketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableRes
ourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Total time: 39 seconds
C:\JDeveloper\jdev\mywork\Async\PSFTAsyncCalcClient>ENDLOCAL
Thanks in advance...

Hi all
I want to connect a secured web service from BPEL 10g. There are no compilation errors. I am getting getting while deploying to BPEL Console.
I am attaching the full console log.
I am using JDeveloper 10.1.3.4. I am not getting any error when i deploy from my home PC. I am getting problem in my office only. There may be some blocks for some external URL. I am not able to find out how to resolve the issue.
I am looking into it... Can you please help me out????
I am attaching the console log from JDeveloper
======================================================================================
Buildfile: D:\Debarshi\AllWorkspace\CRMOnDemandApplication\AccountObjectProject\build.xml
[java] Java Result: 1
validateTask:
[echo]
| Validating workflow
[validateTask] Validation of workflow task definitions is completed without errors
deployProcess:
[echo]
| Deploying bpel process AccountObjectProject on CTSINCALSDV8, port 80
[deployProcess] Deploying process D:\Debarshi\AllWorkspace\CRMOnDemandApplication\AccountObjectProject\output\bpel_AccountObjectProject_1.0.jar
BUILD FAILED
D:\Debarshi\AllWorkspace\CRMOnDemandApplication\AccountObjectProject\build.xml:78: A problem occured while connecting to server "CTSINCALSDV8" using port "80": bpel_AccountObjectProject_1.0.jar failed to deploy. Exception message is: ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "AccountObjectProject" (revision "1.0"): BPEL validation failed.
BPEL source validation failed, the errors are:
[Error ORABPEL-10010]: unresolved element
[Description]: in line 57 of "C:\product\10.1.3.1\OracleAS_1\bpel\domains\default\tmp\.bpel_AccountObjectProject_1.0_c395168db42709156a3350fd7efbeaeb.tmp\AccountObjectProject.bpel", XML element "{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security" of variable "SecurityHeaderVar" is not defined.
[Potential fix]: Make sure the XML element "{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security" is defined in one of WSDLs that are referenced by the deployment descriptor.
If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.java:285)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:804)
at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:670)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:445)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:620)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:317)
at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:339)
at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Total time: 12 seconds
=========================================================================================
Thanks in advance
Deb

Can i set particular website loading slow?

i need to set some website loading too slow , is it possible ?

Hi, if one site is slow to load try Ctrl + F5. If that doesn't do it, open Options (cog wheel) - in the 3-bar menu unless you've moved it, > Advanced tab (Network tab) > Cached Web Content > Clear Now.
Hope that helps.

Setting proxy-user credentials

Hi!
I'm trying to make database reads through the proxy account ('main' proxy user)
and writes through 'normal' proxy user depending on what user is logged in application and make this writes. Proxy user is authenticated by name and password.
1) I've created accounts for proxy users in Oracle DB.
2) I've implemented session event handler for the preLogin event like in the reference:
http://www.oracle.com/technology/products/ias/toplink/doc/1013/main/_html/dblgcfg008.htm
3)Then I need to acquire all client sessions of any logged in application user
with their own proxy-user credentials, but
a) there is no such event as preAcquireClientSession;
b) when this is done in postAcquireClientSession it has no effect (all writes are performed by the 'main' proxy user).
How to solve 3)? Is there any class or event in TopLink where I can set proxy-user credentials?
Hints or ideas will be so helpfull.
By the way, I'm using TopLink 10.1.3, Spring 2.0.

Thanks for reply. I've already read that, very usefull thread. But before today I could not get where interaction with server is.
Now I think I should investigate in org.springframework.orm.toplink.TopLinkTransactionManager, the key to solve my problem not only in TopLink but in Spring also.

I want to install CCPL ,but it is not taking PAC file proxy.So please suggest an alternate way to set proxy for this exe file..

I want to install CCPL ,but it is not taking PAC file proxy.So please suggest an alternate way to set proxy for this exe file..

That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.

How to set proxy for 3G connection?

Can anyone tell me where to set proxy for 3G connection?
I think I've checked every section in Settings but failed to find anything.
Thanks for your info.

It's part of the cellular settings, and is usually set up by your 3G provider. You can't choose your own proxy server

How to set proxy to javamail?

Hi friends:
I want to receieve email using javamail. I use code:
Properties prop=new Properties();
       prop.put("mail.pop3.host",host);
       prop.put("mail.smtp.auth","true");//
       Session session=Session.getDefaultInstance(prop);
       session.setDebug(true);
       Store store=session.getStore("pop3");
       store.connect(host,name,password);
       Folder inbox=store.getDefaultFolder().getFolder("INBOX");
       inbox.open(Folder.READ_ONLY);
       Message[] msg=inbox.getMessages();
       FetchProfile profile=new FetchProfile();
       profile.add(FetchProfile.Item.ENVELOPE);
       inbox.fetch(msg,profile);When I run it, I get exception:
DEBUG: getProvider() returning javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsystems, Inc]
POP3: connecting to host "pop.163.com", port 110
javax.mail.MessagingException: Connect failed;
nested exception is:
     java.net.ConnectException: Connection refused: connect
     at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:106)
     at javax.mail.Service.connect(Service.java:234)
     at javax.mail.Service.connect(Service.java:135)
     at com.developcentry.mail.MailTest.getMail(MailTest.java:44)
     at com.developcentry.mail.MailTest.getMsgList(MailTest.java:65)
     at com.developcentry.mail.MailTest.main(MailTest.java:60)
Exception in thread "main" It maybe I am in the intranat,so It is limited by proxy. Is there any method to set proxy to javamail? For example:
session.set("proxy","address");
If it has ,how to do it? THKS!

Hi Athos,
Please refer to the help document below:
Proxy authentication support for Creative Cloud products
Hope that helps!
Regards,
Sheena

How to set proxy credentials to access wms services in Oracle Mapviewer

Hi,
I use Oracle Mapviewer v. 11_1_1_4 and I want to access WMS service but my LAN uses a proxy server that requires authentication.
The mapviewer configuration file doesn't allow setting 'user' and 'password' proxy parameters. Other threads report this problem like the following:
https://forums.oracle.com/thread/620366
The previous thread is five years old. Are there other solutions now? Does last mapviewer allow users setting proxy authentication?
Can anyone help me?
Thanks,
Arturo

go to commons-httpclient-3.1\docs\tutorial.html. In the left hand side you will get a link named as " user guide" and under that "Authentication Guide" link. check it out.

How to set proxy in code by JDK1.4 ?

Here are two ways to set proxy in 5.0,
1, public static void init() {
    Properties prop = System.getProperties();
    prop.put("proxySet", "true");
    prop.setProperty("http.proxyHost", "10.10.10.14");
    prop.setProperty("http.proxyPort", "8080");
} 2.Proxy proxy = new Proxy(Proxy.Type.HTTP, new InetSocketAddress(("host"), 8888));
URL url = new URL("http://forums.sun.com");
HttpURLConnection con = (HttpURLConnection) url.openConnection(proxy));Now, method 2 could not use in 1.4, and I don't want use method 1.
Please help me provide a method can use it by jdk1.4 just like No.2
Thanks!

prop.put("proxySet", "true"); That does nothing. Try setting it to 'false' and see. This property is an urban myth.
Now, method 2 could not use in 1.4, and I don't want use method 1.So you are out of choices.
Please help me provide a method can use it by jdk1.4 just like No.2There isn't one. Obviously.
What you should do is upgrade to 1.6. 1.4 is past its End of Life and hasn't been supported for some years.

Setting Azure Website General Settings through Powershell

Hi,
I am looking for information on how to set the website general settings through powershell cmdlets. When I create a new Website through gallery and choose Apache Tomcat 7 it default selects the .net framework. I would like to set those off and use Java version
Don't see any commands to set that default while creating a website.
Also, how can I set an SSL certificate and traffic manager end point to my website using powershell cmdlets.
Thanks in Advance.
Trupt

Hi Trupt,
Based on my research, you can configure the Type to AzureWebsite when you use
Add-AzureTrafficManagerEndpoint or
Set-AzureTrafficManagerEndpoint cmdlets. Although the article below is for cloud service, you can change the type and follow it:
http://azure.microsoft.com/blog/2014/06/26/azure-traffic-manager-external-endpoints-and-weighted-round-robin-via-powershell/
In addition, based on my experience, you can create a SSL certificate via Azure PowerShell, however, there is no way to add it to a web site in Azure PowerShell.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

HT5361 Can I set the mail in osx 10.9.1, not when i first set, but now does not.

Can I set the mail in osx 10.9.1, not when i first set, but now does not.

I am not sure I understand you question, but if you are attempting to set up an iCloud email account, you can start in System Preferences > iCloud > Account Details. Establishing the details of your iCloud (a.k.a. Apple) ID there automatically creates the account in Mail

HT4654 setting proxy websites in osx 10.8.2

Similar Messages

Maybe you are looking for