HT4755 I followed the instructions and when logging into the disk there are no files to be displayed?

I am setting up a shared hard drive via airpot extreme base station. I followed the instructions to set up user accounts to set privileges to the disk and upon completion and logging in no files are showing up on the disk?

You have to declare your intention to keep the disk appendable each time you write something, or the last thing you wrote is the last it will accept.

Similar Messages

I just downloaded itunes, and when i go to music there are two options. You can either go to the itunes store or scan for media, and when I click on scan for media it does nothing. Help?

I just downloaded itunes, and when i go to music there are two options. You can either go to the itunes store or scan for media, and when I click on scan for media it does nothing. Help? (I tried deleting itunes and re-installing it but apparently itunes was still on my computer so it asked me if I wanted to just check and see if there were any issues or missing software, so I did that but i still had the same problem.)

Hi jbserious,
Welcome to the Support Communities!
It doesn't sound like the iTunes software and its components installed completely. The article below will walk you through some troubleshooting steps. Is this your first time using iTunes, or do you have an iTunes library from another computer that you want to move to this one?
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Adding music and other content to iTunes
http://support.apple.com/kb/HT1473
Cheers,
- Judy

My macbook pro keeps saying I have 450 gigabytes out of 500 that are used. But when I look on finder there are no files that are anywhere close to that amount. I went through and deleted files from my mac and now I only have 10 gs free

My macbook pro keeps saying I have 450 gigabytes out of 500 that are used. But when I look on finder there are no files that are anywhere close to that amount. I went through and deleted files from my mac and now I only have 10 gigabytes of additional space free. My mac now says I have 440 gigs of other that is used. But does not make sense, do I have a virus?

Since you have not identified the OS your MBP is using, these extract may or may not assist you.
http://pondini.org/OSX/LionStorage.html
http://pondini.org/OSX/DiskSpace.html
You may also download from the Internet OmniDiskSweeper (free) and open it it will show all of the files on your MBP and the respective sizes.
ciao.

Has anyone had this issue. I created my song from itunes to garage band, took my iphotos to create a slide show and when I burned to idvd there are several pauses during playback?

Has anyone had this issue. I created my song from itunes to garage band, took my iphotos to create a slide show and when I burned to idvd there are several pauses during playback?

Hi
SlideShow in iDVD has a 99 photo limit - more than this and all sorts of error occures.
One can have more than one SlideShow on a DVD = X times 99 photos.
or assemble SlideShows in a movie editor (no limit at least not under 650 photos)
(only limit is Time in iDVD (movie time + MENU time --- 60 min or 120 min on SL-DVD and about twice on DL.-DVD )
I use
• iMovie up to HD6 - or -
• FinalCut any version
As they will give a better quality than iMovie'08 or 09 or 11 can do.
Yours Bengt W

Hi, I am trying to launch illustrator after downloading it onto a Mac. I go to apps in finder and click on Adobe Illustrator but there are no files - such as configuration etc. What should I do?

Hi, I am trying to launch illustrator after downloading it onto a Mac. I go to apps in finder and click on Adobe Illustrator but there are no files - such as configuration etc. What should I do?

Thanks for responding, I downloaded the Creative Cloud Installer which is sitting under Devices in my Finder and then installed the Ai app which is appearing under Applications in the finder. I notice that in the launch tutorial there is the Adobe Creative Cloud sitting in the Apps folder above Ai - I don't have this. Hmm what to do?

I have a new imac (10.7.3) and when I download CDs, if there are 21 tracks, I get 21 albums all with just one track. HELP!

I have a new imac computer(10.7.3) and now when I import from cds, if there are 21 tracks, I get 21 albums all with one track. Can anyone help please?
Jim

Steve MacGuire aka turingtest2 - iTunes & iPod Hints & Tips - Grouping Tracks Into Albums - http://www.samsoft.org.uk/iTunes/grouping.asp (older post on Apple Discussions http://discussions.apple.com/message/9910895)
Quick answer: Select all the tracks on the album, File > get info, and either give them all a single "album artist", or check the "compilation" flag (as in https://discussions.apple.com/message/17670085).
If these are from multiple-CD sets you may also need to enter the appropriate information in the disc number fields.

Regarding no party no technical system, or anything when log into IR

Hi all:
Technical systems(ABAP type) and business systems(ABAP type) have been created in SLD, however when log into Integration Repository, there is nothing on object Panel, no technical system or party , totally empty, could you please tell me how to import or the possible reason for this ?
Thanks in advance!!!

HI Sony,
Can you confirm r u in the Integration Directory or in Integration Repository??
You can not find the Business System and Party in IR.
If you are in ID you need to create the Scenarion and then you can get the party, servicewithoutpary,receiver determination, Interface determination, sender agreement and receiver agreement.
Now you can assign the Business systems from the SLD to the Business System under servicewithoutparty-> Business Systems.
YOu cannot findout the Technical Systems in the ID also.
Regards
Sridhar Goli

Error File missing when try to run iTunes on windows. No more info. Uninstalled following support instructions and reinstalled - same message while reinstalling.

Error "File missing" when try to run iTunes on windows. No more info. Uninstalled following support instructions and reinstalled - same message while reinstalling.

Hi there slklug43,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
-Griff W.

Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a quesitonmark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-key

Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a question mark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-keylogger in ZA (an old, and no longer successful fix). Can anyone help? I need my question marks at work.
Thanks!
PS. my keyboard language is not set to French.
== This happened ==
Every time Firefox opened
== I tried to type a "?" in a work email using remote access.

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
Check and tell if its working.
May not be related to your problem but some of your Firefox Plugins are out-dated
* Update All your Firefox Plugins -> https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent problems when logging into some websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop compuHelp

For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent problems when logging into some websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop computer. The wifi unit is a iinet BOB 2 unit. The other computer works completely fine. The only problem is with this apple iPad? I have rebooted iPad and rebooted BOB 2 wifi unit but this has made on difference to the problem?
Can anyone suggest any HELP
Thank You

For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent problems when logging into some websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop computer. The wifi unit is a iinet BOB 2 unit. The other computer works completely fine. The only problem is with this apple iPad? I have rebooted iPad and rebooted BOB 2 wifi unit but this has made on difference to the problem?
Can anyone suggest any HELP
Thank You

Cannot download OSX Maverick? My current system is Snow Leopard 10.6.8 and even when logged into the app store I'm getting the message that I can not download at this time. Try Later?

Cannot download OSX Maverick? My current system is Snow Leopard 10.6.8 and even when logged into the app store I'm getting the message that I can not download at this time. Try Later?

Are you connected via wifi? If so, and it is an option, try connecting using a ethernet cable. It sometimes seems to help as it can give a more reliable connection for the 5.3gb download.
If you do manage to download it you may want to make a copy of the installer file - which gets downloaded to the Applications folder - before running it as it self-deletes on successful installation. It may save you another monster download in the future.

HT201263 Since my iPhone 4S was stuck on the connect to iTunes screen after updating to iOS 7, I followed these instructions and restored. But nothing changed! I still have the same picture of a plug with arrow to iTunes.

Since my iPhone 4S was stuck on the connect to iTunes screen after updating to iOS 7, I followed these instructions and restored. But nothing changed! I still have the same picture of a plug with arrow to iTunes.

It is restored now. Thanks for the comment about disabling firewalls - we did that and tried again and it worked.

I was trying to restore my itouch and when i pressed "restore" and then pressed "restore and update", another sign popped up saying "The ipod "ipod" could not be restored. The disk you are attempting is full. Removing files and empty the recycle bin

i was trying to restore my itouch because it showed on my itouch the itunes bar on top and the charger on bottom so i went on itunes and when i pressed "restore" and then pressed "restore and update", another sign popped up saying "The ipod "ipod" could not be restored. The disk you are attempting is full. Removing files and empty the recycle bin will free up additional space. What do I do?!?!?! please help me ASAP

Hi
I followed this guy's instructions and it worked:
http://evsiphone.blogspot.com/2009/05/iphone-iphone-could-not-be-restored.html
I did disable the security (AVG and Zone Alarm) when I tried on my own PC. My wife's laptop which eventually got it working also uses AVG and Zone Alarm but on an XP O/S whereas my PC is Vista - maybe this is why.
Cheers for you help.
Andy
Message was edited by: bigbadandy

When I try to update itunes, I get the following: The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package iTunes64.msi in the box..

When I try to update itunes, I get the following: The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package iTunes64.msi in the box below.
This leads me to another dialog box that says: The file .......is not a valid installation package for the product iTunes. Try to find the installation package iTunes64.msi in a folder from which you can install iTunes.
That doesn't work either. What to do?
Dean

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

HT4755 I followed the instructions and when logging into the disk there are no files to be displayed?

Similar Messages

Maybe you are looking for