HT4864 problems with iCloud mail server on the mail, but it does not fix it when I put the password in, keeps asking me for password. When I go into iCloud to access it from safari, it accesses the icloud fine with my password. I have reset all the settin
I am running os x 10.7.5, on a macbk, I have been using all the apps fine and not changed anything or run any software updates, suddenly my mail dows not think it can connect with the outgoing server for icloud and requests my password, which I give, but it repeatedly asks again and again. I have tried re-setting all the mail for icloud up again, and it thinks its ok, except the box keeps flagging up can't access outgoing server. I have checked it all a number of times, and I can access the icloud stuff including mail from http when I log in there. Anyone know why my mac will not accept my icloud password? suddenly I cannot get any icloud mail in or out, but I changed nothing. Why does it do this and why can't i fix it?
No carrier "automatically" unlocks at end of contract - many won't do it at all, even if requested. I don't know what your carrier's policy is since you didn't say what country you're in.
However, if I understand you correctly, you didn't change carriers so it doesn't matter if it was unlocked or not. Try the following steps, as needed:
1. Reset phone - press both home and sleep/wake buttons for at least 19 seconds until the Apple logo appears
2. Settings > General > Reset > Reset Network Settings
3. Restore phone in iTunes using a backup
4. Replace SIM card (don't care what Telstra says)
5. Restore phone in iTunes as new, without using a backup
6. Take phone to Apple.
Similar Messages
-
I just installed this update and now I cannot access "Mail" at all. I tried reinstalling the program, but that does not work, either. Help!
Paldeng, thanks for the suggestion. I've done all that. I can connect to the server, but apparently they are not recognizing my ID and password. I can use the server program if I don't go through Mail (using the same ID and password). My mother in another state with another provider has had the same email issue, as also my husband on his laptop who uses the same internet connection I do. His worked fine until we had it repaired at the Apple store and all the original programs reloaded (with the required updates, I assume). We can receive email in Mail, we just cannot send.
I contacted my service provider, and we went over my connections. They said it was not their problem and connected me with Apple, resulting in a charge to me because my warranty is long expired. Apple swears it is not their problem, it is the provider, so here I sit. My son was able to fix my Mom's Mail (she's 97) and got my husband's working also, until mine went out, by tweaking connection descriptions and ports remotely. The thing is, we had not messed with any of those settings, so what changed? I just did not want to bother my son again, as he has many other demands on his time.
Since this fiasco with the Mail v4.6 update, I'm wondering if something else was updated that works well with Lion and Mountain Lion, but does not work well with Snow Leopard and Leopard. I think the problem I had with the Mail update was that my Mail program had been renamed to Mail (original), and therefore was not being recognized by the update. Perhaps they had another tweak in there somewhere that is affecting outgoing mail connections? -
I have an iPod and an Ipad and want to use FaceTime calling from the iPod to the Ipad but it does not work. I use the same iCloud accountedge
Did you set up different email addresses for each device?
iOS: Using FaceTime
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems -
Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.
1. Triple-click the line below to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu. An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test. -
Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?
Thank you for your response.
I had rebooted the router (several times, actually), to no avail.
I do not know the answer to whether MAC filtering is enabled on the router. Have tried to find info about that, but unsuccessfully. Router is an Arris TG852G, supplied by Comcast. I would be surprised if MAC filtering were the issue, since in addition to the computer, we have successfully connected several other devices to the wifi, namely an iPad, a Android phone and a Kindle Fire - all able to access internet pages through the wifi, and all without a need to add the device to a MAC address whitelist. To add to the mystery, the Comcast tech was able to connect his iPhone 4 to my network and access web pages. He was unable to connect my iPhone, however, after trying for some time.
I seem to recall reading somewhere that an iPhone cannot connect to a wireless "n" router, only "b" or "g". The Arris router is described as a n/g/b compliant router, and as noted the Comcast tech was able to connect his iPhone, so don't know why that would be the issue here.
By the way, my iPhone does connect wirelessly to my network at home. This difficulty is at a second home.
Any other thoughts would be appreciated. -
I cannot play music with my slideshows. I setup the music but it does not play, even with my older slideshows I hear no music.
This category is for iPod shuffle. Is that the type of iPod you have, because your description of the problem does not sound like it's about a shuffle? If it's not a shuffle, what is the iPod model...?
There is music there and I can play it connected to laptop.
Are you doing the playing using the iPod, or are you playing the music using iTunes on the laptop?
All mucis icons read "No music" and this is not correct
Do these icons with "No music" appear on the laptop's screen, or on the iPod's screen -
Is the printer compatible with iPad2? I want to print but it does not recognizes the printer.
Is the printer compatible with iPad2? I want to print but it does not recognizes the printer.
Which Printer?
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution" -
My iPhoto library has suddenly disappeared from my computer.
When i click on iPhoto it tells me to choose my library or create a new one. However no library option appears. I have searched the computer for the library but it does not seem to exist anymore. I did not have time machine set up, so there is no back up. Is there any way i can retrieve my library?
Here is a picture of what appears when i click on iPhoto:In terms of searching i have searched for photos on my finder. However, none of the photos that appear are from my iPhoto Library.
Search with FindAnyFile. You can download it here: http://apps.tempel.org/FindAnyFile/index.php
Search for any file with "ThumbJPGSegment" in the name. If you added at least one image to your library, the library should contain a file with this name, see OldToad's post: Re: Since I updated to iPhoto 9.5.1, my library is not listed or available. How can I find it? Can I use the time machine to restore it? -
How do I back up the calendar and contacts from my iPhone5 to my new macbook pro(10.8.3)? I have backed up the phone, but it does not transfer the calendar or the contacts. If I check them in the sync area and then back up the phone again will they transfer or be erased? I am a bit gun shy since my previous macbook pro committed suicide and I lost a ton of info there.
Copy everything from your backup copy of your old computer.
-
I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?
The Mac running Snow Leopard should be able to configure virtually any version of the AirPort Express.
Tell us what steps that you are taking to configure the Express and what happens after each step. -
hi, i tried to update my iphone 5s and now the only that shows me in screen is to plugged in with itunes. I am opening itunes but it does not installed with it or regognized it ... what i must to do ?
Read this
http://support.apple.com/kb/HT1808?viewlocale=en_US -
just got an iphone 4 from my dad and its his old iphone and i was gonna delete his account so i can put my account on the iphone but he does not remember the password so I couldnt delete it. I need help deleting it without a password.
If the iPad has Activation Lock - that is, it's asking for the previous owner's Apple ID and password to activate the device or to turn off Find My iPhone - then you will need that information. There's no way around it If your father can't remember the password, he'll need to recover it.
http://iforgot.apple.com
If he can't do it via that page, then he'll have to call Apple Support and ask to speak with Account Security.
If that's not the "password" you meant, please post back and clarify.
Regards. -
I can't transfer a PDF ebook from my computer to my iPad. I follow all the instructions in the manual, but it does not go to itunes
Scott
You can follow this method if you have the recovery cds with you.Use Lenovo's secure data disposal and wipe the entire HDD clean, then use your discs to restore to the default factory settings.
http://www-307.ibm.com/pc/support/site.wss/TVAN-SDD.html
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo -
Ihave a movie stuck in itunes for 3 weeks taking up 7 gigs of memory.I deleted it from the videos app but still remains on the ipad.I also tried deleteing it from itunes on the pc but it does not appear there.Dont want to reboot the ipad if possible .Thanks
That list includes all the apps that you installed to your device directly from iTunes on the computer, or which were purchased on the iOS device and subsequently transferred to iTunes on the computer.
If you right click on any item in that list and choose "Show in Windows Explorer" it will open your iTunes application installer directory on your computer, which should be:
C:\Users\User\Music\iTunes\iTunes Media\Mobile Applications
In there are all your saved application installers (*.ipa files). You need to delete those actual installer bundles and then make sure to NOT allow the "transfer purchased content" when you sync or backup in iTunes (as that will just put them back on your hard drive).
One caveat to removing those, is that if you ever wish to keep a specific release of a particular app, and the developer replaces the iTunes/App store version with something else, your sole source for your older version will be your own stored copy of it. So for example, when PDF expert released their iOS 7 update, and charged everyone full price for it, if you wished to keep using the previous version on your own devices, then you needed to keep a copy of the installer on your own computer as that older version is no longer available in the store front. -
my ipod touch will not connect to my home wi-fi internet which is locked,i've tried using the password on the router but it does not accept it.
i phoned talk talk for advice but unfortunately i would have been as well asking an axe weilding monkey high on cocaine...
appreciate any advice...
thanks.
martin.thanks for getting back so quickly.when i put password into ipod it comes up with message
"unable to join network"
the router is using AES incription.
my wi-fi is a secured connection WPA2,
i believe i should have WEP or WAP connection for it to work?
i have set up my daughters nintendo 3ds lite to internet no problem using existing connection.
talktalk said they do not support apple ipod touch sytem?
very confusing,particulary as i've bought 3 ipod touch ,,,,mmmmmmm!
thanks again.. -
When an image is inserted here using clipboard, it appears in the editor, but it does not appear in
when an image is inserted here in forum po editor using clipboard, it appears in the editor, but it does not appear in the post. When the image is inserted from a file, it works
Im not completely sure, why you are pointing out the very same thing I'm pointing out too. If you re-read my original post thoroughly, you will find - at its very end - the sentence "When the image is inserted from a file, it works". Since I'm not aware of the way how to insert the image from a file in a procedure other, then clicking the "camera" icon, I hold such a sentence for more then enough to point out, that the camera icon works fine for me (if you re-read my post thoroughly and pay detailed attention of my expression "using clipboard", then you shall definitely evaluate this expression as covering both ways an image can reach the cliboard, eg. Copying from a graphical editor/processor or dragging&dropping a graphical file).
However more then this, your post does in fact NOT reply to the fact, why the WYSIWYG editor box allows the insertion of an image from clipboard, but then fails to upload it and thus it is not displayed in the post.
For the sake of completness, I must also point out, that your last sentence of your post "And that's what it is there for" does not bring much clarity about that thing - while I fully understand, as one can observe from my "When the image...it works" sentence, the functionality, purpose and propper handling of the "camera" icon, I cannot agree with such a behaviour of the editor, that allows an operation to be done (What You See) that does not affect the outcoming result (Is What You Get).
From the theory of designing (G)UIs one may learn, that in such a case the operation should either fulfill completly (eg. display the clipboard-inserted image in the resulting post) or fail completly in the beginning (when Pasting the image into the text), either silently (just not displaying the image in the editor field) or with an error warning such as "Insertion of images/bitmaps from clipboard is not permitted". For Windows-like environments (such as, but not limited to, Microsoft Explorer, KDE, Gnome, IceWm....) the change of the dragging cursor to display a kind of "No way" or "no entry" pictogram, is also advisable.
For the sake of completness of my reaction I also might percieve your last sentence as a kind of irony or sarcasm, which however I definitely do not find appropriate behaviour, more over I might call it an "arogant rudeness" in case of such a "VIP" member with more then 9000 posts in the time when this post is being written, with a hint of overworking, malicous intends, inattention, ego-centricism or any other personal failure(s) or a combination of them, that you should - in case they are present - definitely pay attention to in your private life.
Moreover, let me please point out, that Im not much pleased about the way this forum works with its users, since I find the bug I have discovered, only a small one (a category B one might say in the A-B-C scheme, eg. a category, that does not directly influence or prohibit the execution of the main business cases, however it may result in discomfort, data loss or operation repetition, such a category would be most possibly a category C in the A-B-C-D scheme). Therefore I must explicitly express my annoyance that you have the guts to handle the post I did like this, when - in my opinion - the post has been written in such a manner that it was merly a polite point out of a small bug, thus it was kept as brief as possible, but fully covering the description of the scenario, alternate scenarios and their outcomes. Moreover, I'm definitely displeased, that you allow yourself to post such a post, that - instead of exploring the matter - throws the whole matter on the head and inside-out, or, one may say, kicks the bucket, and forces the original author, in this case me, for re-accounting for himself, moreover the ambivalency of your post opens such many possibilities to account for, that the time and resources the self-accounting autor has to spent, heavily overweighting the importance, significance and impact of the bug itslef.
So let me please advise you for the next time:
- to explore posts with more thoroughness, evaluating their expressions and sentences much more deeply, rather then just glance through on their surface
- think twice before answering and try to figure out how such answer might be percieved
- try to do less posts, but with higher quality
- try to employ more politeness and correct behaviour
- approach the matter with more humble and curious attitude rather then with a "I-know-everyting-better" standpoint
With regards
Lukas Plachy
Misstypes corrected by rheingold.
Maybe you are looking for
-
Purchase Order history is not updated with Invoice number
Hello Experts , Please suggest some inputs/solution for my problem. Scenarios is : PO --> SO --> Invoice I am creating the invoice with the medium EDI , when I click on Save button IDOC is generated with the message " IDoc 'xxxxxxxxxxxxx' was created
-
Duplicate control label preventing creation of unit test using UTF
Hello Everyone, I was trying to create a unit test for a VI using the unit test framework (evaluation version) to try out this tool. I have two questions regarding that. 1. Several sub-VIs are called by this VI. I wanted to create
-
Tax depreciation area and non-leading ledger
I want to know how to post assets retirement and transfer transaction into non-leading ledger. I setup one depreciation area 50 for local tax depreciation and accordingly one non-leading ledger ZZ for local satuary report. Depreciation area posting i
-
Delete a number range Group in internal order
Dear experts! Now, I'm getting some issue about maintain number range group in internal order. So I defined a number range group, after that I want to delete the number range group. How do I have to do? Best regards, Huy
-
How can I install the photoshop in windows vista
How can I install the photoshop in windows vista