HT4889 Used migration assistant to move from Lion to Mountain Lion and an entire user account did not move over.
The user name (account) was the same on the source and the new computer. Is this why the data could not move over? I did not see this user account in the list of users presented by migration assistant. Thought it was default so that is why it wasn't shown. I can move the data over manually, but this was a surprise. Any feedback on why this happened?
I migrated Office 2011 and other than forcing me to enter the license code again (all 2 million letters of it) everything went OK.
Note that when I tried to open Parallels desktop 6 it wouldn't open and said that it wasn't compatible with Mountain Lion and the icon had a sort of greyed out look. I upgraded to 8 and it started working. I wonder if there is any issue with Office 2008 and Mountain Lion? Probably not but it's a possibility.
You can buy an external superdrive too from Apple. I bought one for my 2010 Air. But CD sharing from another computer should work. I bring it with me when I travel to watch DVDs.
Similar Messages
-
I am trying to use migration assistant to move everything from snow leopard (10.6.8) to mountain lion (10.8.3) using a direct machine to machine ethernet cable connection but it stalls out at about 17 minutes remaining. Thoughts on how to proceed?
Have you set both to never sleep?
Is the source (old) Mac's software up to date (including the Migration Assistant for Mac OS X Snow Leopard update)?
Is the old Mac healthy? Have you run Verify Disk on it lately?
The estimates are wildly inaccurate under the best of circumstances. How long has it been stuck? -
Has anyone used Migration Assistant to move services from one system running Server to a new system?
So, I've purchased a Mac mini to replace my aging Mid 2009 mini on which I've been running Mavericks Server. In trying to answer the question of how best to move services from the old machine to the new, I've stumbled into the fact that Migration Assistant can apparently migrate not just user data for workstations and laptops, but also service data for servers. The problem is there isn't much detail in the docs about how good a job it does when going from one machine to another without changing OS releases. There's a very detailed document in the KB about going from older versions of Server to new (OS X Server: Upgrade and migration from Lion Server or Snow Leopard Server) and a general doc on migrating from another Mac under Mavericks (OS X: How to migrate data from another Mac using Mavericks) but that has no details about Server.
Has anyone used Migration Assistant to move services from one system running Server to a new system? Are there any details that are particularly important to get right? Are there things that require manual steps after Migration Assistant is done?
There are other ways I could tackle the problem, of course. I could simply swap drives between the systems, but the new system has two drives that are bigger, faster, and I intend to mirror them. That would complicate such an approach. I'd really like to keep the conversation constrained to a discussion of Migration Assistant as the primary method.yes. I migrated a server frm lion to mavericks following these notes a while back:
OS X Server: Upgrade and migration from Mountain Lion
i do not recall having any problems with it. -
i use migrate assistant to move files from my old pc to the new Mac , but it creates the user account. How can i delete the unwanted user account.
Welcome to Apple Support Communities
That's the classic behaviour after using Migration Assistant and that's normal.
To transfer the data from the new user account to your old user account, you can follow some steps. Here is all the information you need to do this > https://discussions.apple.com/docs/DOC-5472 -
When using Migration Assistant to move files from old PC laptop to new MacBook Pro, that has Windows 8 installed containing Outlook, will emails, contacts and calendar entries be moved to Outlook on the new MacBook or into Mail, Contacts and Calendar?
I doubt they will. But then I'm not sure as I used a migration program once about 18 years ago and totally FUBARed the system I had at that time and I've never used one again.
For me the reason to have a new system is to start fresh. Installing only program that I now use and manually copying data over from the older system.
Not sure your older version of Outlook, and the outlook mail boxes, are compatible with Office/Outlook for Mac 2011.
A better place to ask this question would be on the MS Office for Mac forums.
Hope it all works out for you. -
Using Migration Assistant to Move Data Files from one Account to New User
Is it possible or recommended to use Migration Assistant to move data files from an old user account to a new user account on the same volume/hard disk?
Migration Assitant cannot be used as a simple file transfer utility. MA can transfer an entire Home folder or entire Users folder but not individual files.
In general files in one user account cannot be moved to another user account as this would violate built-in security measures.
What you can do is to copy the files to an external device like a hard drive or flash drive. First log in to the old account. Then configure the drive to ignore preferences by Pressing COMMAND-I to open the Get Info window and check the Ignore permissions on this volume checkbox at the bottom of the window. Copy your files to the device. Log into the new account. Verify the external drive is still configured to ignore permissions (reset it, if not.) Copy the files from the external device into the Home folder of the new account. I would create a temporary folder for these files. If you still end up without the proper permissions you will need to make modifications that are easier done if all the files are in a single folder. -
secondly, i used migration assistant to move everything from old laptop to new. when i used pages on new machine, 10.8.5 operating system, there is no click for file save as in the menu, only flle save. why?
Hold down Option key while clicking on menu bar and Save as will appear.
-
Why can't I seem to use migration assistant to move applications from time capsule to iMac?
I just want to use Migration Assistant to move select applications to my new iMac. I can't seem to find a way to select only a limited number of applications to transfer. I want to move applications such as a Canon Utilities and Image browser applications that came with my Canon camera that I bought. I loaded the original software on to my Macbook Pro with the discs. I can't do that with my iMac (obviously) so I'm hoping to get my canon software onto my iMac through migration assistant. Please help!
It is not as fine grained as that.. you select all or nothing.. At least from my experience using it.
It works if you remember that all the applications will be imported to a particular user profile.. simple create a new user.. log in with that and accept what you have to to get the applications you want.. although I would suggest most things are available for download nowadays.
You can also keep using your old MBP if it is still working and simply copy the files on the CD to the new computer via the disk in the MBP. -
Used migration assistant to move office 2008 and now i cannot open it
I had an old MacBook from 2008, and now have a new MacBook Air. Was told to use migration assistant to move my applications. I did this and now when I go to open any programme from Microsoft Office 2008, it takes me to Microsoft Office Setup Assistant, over and over and over... Its saying that I don't need to register...
Any advice or help?I migrated Office 2011 and other than forcing me to enter the license code again (all 2 million letters of it) everything went OK.
Note that when I tried to open Parallels desktop 6 it wouldn't open and said that it wasn't compatible with Mountain Lion and the icon had a sort of greyed out look. I upgraded to 8 and it started working. I wonder if there is any issue with Office 2008 and Mountain Lion? Probably not but it's a possibility.
You can buy an external superdrive too from Apple. I bought one for my 2010 Air. But CD sharing from another computer should work. I bring it with me when I travel to watch DVDs. -
I used Migration Assistant to transfer from MBP (Leopard OSX 10.6.8) to Mac Mini (Lion OSX 10.7). Documents cannot be "seen" or "found". Ditto Music , movies, and pictures.Stumped!
System Preferences/Users & Groups shows you the various user accounts you have.
Look at your hard drive in the Finder sidebar. You should see Applications, Library, System, and Users. If you look in Users you will see a Shared folder. From the user Migration Assistant created, find the iTunes folder and drag it to Shared. Log out and log in using your normal user account, go to the same place and copy it to Music in your normal user account. Another option is to leave it in shared so any user can access it. You will have to tell iTunes where to find the music by going to iTunes/Preferences/Advanced.
Welcome to the world of Mac. Some ‘light’ reading to help the transition. I don’t recommend trying to get through all of this at once.
A guide for switching to a Mac
Anatomy of a Mac
Mac Basics—Tutorials on using a Mac
Mac OS X keyboard shortcuts,
Mac Basics – Mac Find Out How
Mac Basics – Switching From Windows
Mac OS FAQ
MacTips,
Quick Assist
Switch Basics
Switching to Mac Superguide
Switching to the Mac: The Missing Manual, Mountain Lion Edition
Take Control E-books
Welcome to the Switch To A Mac Guides -
I used Migration Assistant to setup my new MacBook Pro (Retina) and to transfer my user account from my 1-year old MacBook Pro. Both computers have the same harddisk (500 GB SSD), but the new one now only has 85 GB of free HD space, whereas the old one still has 168 GB free space.
The space seems to be from files that show up as "Others" on the HD, but the large folders (music, movies, photos, documents, system, library etc.) are the same size on both computers.
Does anyone have any idea where the extra data could come from? I assume that languages would be stored in the System or Library folders, so even if I had deleted all unused languages from my old computer (which I may have done a year ago, I am not sure), this should not result in a more than 80 GB difference in free space, should it?
I would be glad if anyone had an idea where all the data may come from or how to get rid of it. Thanks a lot.baltwo wrote:
I'd get an external, bootable FireWire enclosure, put the new HD into it, ensure it runs the MBP, and then swap.
One thing to consider going forward: the new MacBooks (annoyingly!) do not have a Firewire port, so it might be a good idea to consider dual Firewire & USB 2 external drives/enclosures for future purchases. It won't matter for this swap but it will help avoid buying something that can't be used with any new Macs that don't have Firewire.
An low cost alternative for those that just need a temporary way to mount an external drive for uses involving only Intel Macs are the newish bare-bones USB drive adaptors, such as the NewerTech USB 2.0 Universal Drive Adapter. The advantage to these gizmos, besides low cost, is that they work with both ATA & SATA drives. Some, like the NewerTech model, also support other devices, like some optical drives. -
I bought a new iMac today. I'm using migration assistant to move all my software, but the time just keeps getting longer. It says connect an Ethernet cable for faster data transfer. I did, but that doesn't seem to help. Any ideas?
m1doc,
Are you migrating from a Mac or a MS Window machine? Either way you probably should be in touch with AppleCare, you have 90 days of free AppleCare telephone support. They can usually help on issues like this. If you don't know the phone number please use http://support.apple.com/kb/HE57 to help find the number in your country. -
I used Migration Assistant to transfer from my VAIO Sony computer to my IMac. I can't find any of my photos or most of my music. I suspect it is in a folder called VAIO in Finder under Shared but it wants a password to open it that I dont have. I never had a password on the Sony computer and I have tried all the ones I can think of.
Any suggestions.This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
Regards. -
I used migration assistant to move all my programs to my new Macbook Pro - Now CC won't run
I used migration assistant to move all my programs to my new Macbook Pro - The programs would run but I had to enter my license key each time - I tried downloading and reinstalling CC but always get message to contact support. Any thoughts on next step?
Adobe programs need to be installed, migration/transfer does not usually work. Try using the Cleaner tool uninstall whatever you currently have on the machine and then reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
I transferred files and photos from MacBook to iMac via ethernet cable and using migration assistant. However every time I transferred, it created a separate user and it transferred all files and photos again and again. So now I have 3 users accounts with all files and photos saved 3 times on same iMac !! Any idea how to avoid this ?
Yes, you ran into a very understandable problem.
When you use Migration Assistant, it cannot over-write the account that you happen to be using at the time. Upon migrating accounts, it will tell you that it is going to create a new one, but that message is easy to miss.
If you have three identical accounts, log in to the account you want to keep, and delete the redundant ones in System Preferences > Users & Groups.
Now that you know, the easiest way to migrate accounts is to use Setup Assistant when you first get a new Mac. That eliminates any possibility for this to occur, but most people are so eager to use their new Mac that they elect to migrate later.
That's OK too, but in that case you would want to create a temporary account whose sole purpose is to run Migration Assistant so that you may migrate your old one with an identical name. Be sure to give the new account Administrator privileges. When that finishes you would log in to the newly migrated account, and delete the temporary account.
Maybe you are looking for
-
Hi all! When I compile my CVI Project I get sometimes the following message: "Error writing workspace file d:\.... (File already exists)", and afterwards the question to continue or not (see the pictures). When I continue, the existing .cws file will
-
Manual G/L a/c incase of purchase order and migo
how to maintain manual G/L acccount for purchase document. thanks in advance with regards
-
dear all, I have setup a new role and made adhoc query for users to be able to maintain, change etc...... You can set up authorizations in such a way, that certain end-users in a user group are authorized to maintain and execute queries, while other
-
I have a question. How do we export not only the thumbnail, and full sized rgb jpg for the gallery, but also export the edited cmyk tiff from which the thumb and jpg are created? Not only that, but we seem to be required to export that full rez cmyk
-
System Specs: Win 2000, Oracle 9.2, Running in High Availability I am really at a loss. I have been on this problem for almost a week now. Primary switches over fine. On Standby I issue the command: alter database commit to switchover to primary with