HT4972 My iPhone 4 does not allow me to update my phone there is no "software update" selection in general settings
My iPhone 4 does not allow me to update to ios5. There is no "software updates" listed under settings and general where this is usually found?
You will need to connect the iPhone to the computer and iTunes and update in that fashion. Since the OTA update ability was introduced in iOS 5, if your device has an iOS of less than iOS 5, you will have to do it that way. After updating, you will be able to do subsequent updates OTA.
Connect to iTunes, select the phone in the device pane and select update. Also, you will not be able to update to iOS 5, you can only update to the latest iOS, which for the iPhone 4 is iOS 6.1.3.
Similar Messages
-
My iphone does not allow me to select the Wi-Fi setting. It is all grey and says no Wi-Fi. How can I fix this problem?
Thank you for that. I've been on the web trying to work it out and resetting my phone etc and no luck. Thank you so much for your help. Guess I'll be making plans for a trip into Apple.
-
My calendar app (Tuesday 1 Calendar) does not allow me to add events. There is not a (Calendars or +) at the top of the application. Previous iPhones I have had had this feature. Please advise
Go to Settings>iCloud, turn Calendars to On.
-
My iphone showed to the settings that there is an update available, so there was a software update and i did it , but i don;t like this version ,and I want to go back .How can i do it
You cannot go back.
-
I just receive my new ipad mini. After turning on, there is not apps to do any setting. There is a picture of a world map with either Chinese or Japanese language.
How do I get to do the set up?Setup new iPad
1. Turn on iPad
2. Set Language; tap arrow on top right
3. Set Country; tap Next
4. Enable Location Service; tap Next
5. Setup WiFi (connect to internet)
6. Setup as new; tap Next
7. Sign-in with Apple ID
8. Agree with Apple Terms and Conditions
9. Enable iCloud
10. Enable Find My iPad
11. Register iPad
12. Start using iPad -
My ipad is dissabled as it does not recognise the passcode i have put in after updating the software . How can i unlock ?
I updated my iPhone 4S to IOS 7.0.2 then tried to use a complex password instead of 4 numbers.
Even though the password was verified and correct, I am now locked out of my device.
Unfortunately I do not have a recent backup of my device and, as far as I know, a restore from backup is the only solution to the problem. -
I can record voice notes no problem, but when i make calls the recepient cannot hear me.
I did a full restore and had one succesful call and that was it.
tried calling with and without the cover no luck.
phone is only two weeks old,problem only started once i did the latest software update. vs5.1.1
any idea's?Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
If you've gone through ALL the troubleshooting steps and you're still having problems, there's really not much left to recommend. You'll need to bring your phone into Apple for evaluation.
Best of luck.
GDG -
Hello,
A day before got new IPAD mini (Wifi-Cellular). When trying to look forpasscode enable option, it ended with nothing to avail. Would like to know if there is any such priviledge or not. Secondly, when the iPad is left idle for awhile ,say, 5 minutes,, a poor screensaver pops up and continues to play IPad advertisement, which we usually find in DEMO products @stores. Doubtful, if seller has handed over bad/demo stuff to me. Please suggest. It took whole of last night to figure out on Google, but no success.
ThanksMorning driving,
Thanks for using Apple Support Communities.
You can configure a passcode for your iPhone, iPad, or iPod touch using Settings > General > Passcode Lock.
iOS: Understanding passcodes
http://support.apple.com/kb/ht4113
If you are unable to modify certain passcode settings, there may be a configuration profile that requires these passcode options.
You can find out if a profile is installed by tapping Settings > General and looking for the Profile setting between Accessibility and Reset.
Best of luck,
Mario -
System does not allow change to matrial master as there is open transaction
Hi,
I am trying to change an existing material master (MM02 of account view 1) to split valution, however, I encounter the following log message which prevent me to change the valuation category.
Message Log
The Valuation Category Cannot be Changed for the following reasons:
Production Order (basically IW33 PM refurbish order) already exist.
PlantOrderItem
1000-4018111--1
Suprisingly the PM order is closed and it has the following status:
CLSD, PCNF, DLV, GMPS, MANC, PPRT, PRC, SETC.
May I know how to resolve this so that I can update my material master to split valuation in accounting view?
Thanks.
TuffHi
When you are getting error while changing the valuation category for any material in MM02, you can see one icon of display error, please click on that and here you can see all details about what you need to do.
Split valuation
Valuation Category change in accounting view in material master
Valuation type - Removal
http://help.sap.com/saphelp_470/helpdata/en/90/ba6228446711d189420000e829fbbd/content.htm
Hope this will help you to solve your problem
Regards
Praveen P C
Edited by: Praveen Chirakkel on Aug 2, 2011 11:34 AM -
Currently the iPhone does not offer video out capabilities
Currently the iPhone does not offer video out capabilities. Will there be a software update enabling the iphone to have this feature ? And wll the myvu universal work with the iphone if there is an update available ?
Hey unclescotty,
The iPhone does support video out with the 1.1.1 update. You'll just need an Apple Component AV Cable.
http://docs.info.apple.com/article.html?artnum=300233
Just update the iPhone through iTunes.
http://docs.info.apple.com/article.html?artnum=305744
Jason -
TS1702 iphone apps not allowed
iphone does not allow download of apps. Says to delete videos and photos. Have no videos and very few phtos. Any suggestions?
It sounds like you are using a different computer than the one you last synced the phone to. The iPhone can only sync to one computer; if you try to sync to a different one all of your content will be deleted and replaced with content from the new computer.
-
After upgrading to a new iMac 27 my iPhone does not sync with iTunes
After having the Apple Store migrate all my data and programs from an older iMac to a new iMac 27" my iPhone does not sync. After connecting the phone it begins and goes to about steps 3 or 4 and then the "apple" appears indicating it is finished - however new pictures have not been transferred to the phone and updates for apps have not happened. Any ideas?
Your music/movies, etc will only be where you put them.
Copy everything fom your old computer or your backup copy of your old computer to your new one -
How to block a payment in F110, when the system does not allow us to block
Hi all
Blocking of a payment happens in the following areas :
1. In a single document Fb02 transaction we can block a document by giving A as option for not paying for that document before going to F110.
2. We can also block a vendor through Vendor master area
3. We can block a Vendor from paying through Xk05.
Now my doubt is that.... i had saved a proposal in F110, after saving it, now i want to block a payment for a vendor. But the system does not allow me to block it. Why the system does not allow the block. Or is there any type of error like this, that system does not allow the block after setting up the proposal for payment.
Can anyone help me out in this...
thanks and regards
SLDear,
Even you set payment block after saving the proposal system will execute that payment. So better you delete this proposal and then set payment block in the vendor line item. Thereafter system will pick that bill for payment.
Regards,
Chintan Joshi -
Blackberry Link - not recognizing device and does not allow synching calendar and contacts
I cannot get Blackberry Link to work properly on my laptop running Windows 8.1 Pro. It takes a very long time to open and it does not allow me to sign in saying there is no internet connection and I cannot get around resolving this issue. That is problem 1. Problem 2, Blackberry Link sometimes recognizes the device and sometimes it does not. Problem 3, when I do get Link to recognize the device, (it can backup), synching the calender and contacts on the device to Outlook does not work. I try to do a one way synch from the device to outlook and it processes but Outlook is not updated (outlook has no contacts or calendar events as I want to pull them off my device).
Any ideas? Thanks.Hello RankinWilbur44
Welcome to http://supportforums.blackberry.com/
Visit this Article ID: KB34374
Check this information
I hope it's a good help to your problem.
Via: sdgardne
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/How-To-OTA-Sync-BB10-and-non...
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I -
OK, I have a great iPhone 3G issue for you. Here it is...
In order for me to retrieve my voice mail messages on my office land line, I have to call my office direct dial phone number. After that outgoing message begins to play, I have to press ** on my iphone keypad to prompt the voice mail phone system to let me know dial my extension number and password. On my old iphone 2G, it works fine. But with the new iphone, it does not. Another words, when I press **, it does not allow me to the part where I dial my extension number and password. It instead instructs me to dial my extension number and leave a message (not enter my password). Possibly the ** tones from the new phone are too short? Not sure? There are two other people at my company that are having the exact same issue on their 3G phones as well. I even went to the AT&T store and tested it on the display iphones there. Same problem...I was on the phone for an hour today with tech support. I spoke first to a tech support agent and next to an iPhone product specialist. Neither had heard of this issue, but I referred them to this thread and they now know it is an issue.
The product specialist tried to solve the problem and could not. He told me he was emailing the engineers to determine a workaround. He told me he would call me by Tuesday at the latest. His name is Richard and I will continue to update our progress in fixing this issue as I receive information.
If we can't access our land line corporate voicemail I don't see how I can keep the iPhone even though it otherwise works well and has many positive benefits over the Windows-based smartphone I was using (and may have to go back to).
Maybe you are looking for
-
How can I have an apple ID without Credit card details?
Hello, I recently bought a VISA 3prepaid voucher and now I cannot download anymore apps because the card is out of date and it says "Sign in required" and I don't want to add my Credit card details. Please help me because it has no "NONE" option anym
-
Need urgent help on file download servlet problem in Internet Explore
I have trouble to make my download servlet work in Internet Explore. I have gone through all the previous postings and done some research on the internet, but still can't figure out the solution. <br> I have a jsp page called "download.jsp" which con
-
Migrating from CFv.4.5 to MX7
I am experiencing the following error after migrating code from v.4.5 to MX7. ***This code: <cfif isDefined("URL.Add")> <cfinsert DATASOURCE="eval" TABLENAME="tblGeneralEval" FORMFIELDS="SCHD_ID,date,class,instructor,rotrain_id,stuname,GQ1,GQ2,GQ3,GQ
-
Does anybody have any experience with Forte and MSMQ integration??? Here are the details: We are currently deployed on Windows NT and Windows 3.1 for the Client partition. Our server partitions are deployed on UNIX (AIX). We also have WEB access buil
-
Enterprise services regarding Purchase Orders
Hello, We want to use following enterprise services: PurchaseOrderCreatedInformation_Out PurchaseOrderChangedInformation_Out The services are sent by activating following events in SWE2: CL_SE_PUR_PO_WF_OUT - CHANGED - WS53800008 CL_SE_PUR_PO_WF_OUT