HT4993 I updated to ios 7, put in a password but now it does not recognize the password and will not let me get into my phone. what do i do?

Yesterday I decided to finally update my iphone 4S to the latest operating system 7. It asked me for a password when upgrading but now does not recognize the password and will not let me in. FRUSTRATED. What do i do????

Hi Rachel,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Cheers,
- Judy

Similar Messages

Whenever i click a song it take awhile to play? before i updated to ios 8 i never did that it was always fast. but then when i updated to ios 8 it became slow. But whenever i close out of the app and go back it it will go from slow to not slow?

Please help?

If you delete the YouTube app you will not be affecting your YouTube account. You can always reinstall it & see if that fixes the problem.
As far as Safari pages reloading between tabs, I have also noticed the issue after iOS 8 on my iPad 2. Updating to the latest iOS on older devices can see a degradation in performance within certain apps due to the limitations of those devices.
We made the choice to update & with the many benefits of the latest & greatest iOS there are bound to be some problems too,

I have the 1st generation ipod touch i installed an update which now it is 3.1.3 version i was able to put my apps on it but when i want to use the apps it will not let me use them. what do i need to do?

I have the 1st generation ipod touch i installed an update which now it is 3.1.3 version i was able to put my apps on it but when i want to use the apps it will not let me use them. What do i need to do?

Does it happen with the apps that came with the iPod?
Does it happen with all apps you have downloaded/installed?
Have you ried deleting the apps and redownload/install the apps? You will not be charged again if you are signed into the same iTunes account that originally purchased the apps.
Next would be to restore from backup
Last would be to restore to factory defaults/new iPod.

HT4623 i hav updated my ifone software to ios6.0.1 but now its apperaing a usb then aero and then itunes on the display!!!what should i do now???

i hav updated my ifone software to ios6.0.1 but now its apperaing a usb then aero and then itunes on the display!!!what should i do now???

NOTE:
The current iOS for the iPhone 4s is iOS 6.2.1
ahmedrhashmi wrote:
...now its apperaing a usb then aero and then itunes on the display!!!what should i do now???
You need to Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...

I PUSH TO UPDATE AND IT IS HUNG IN THE MIDDLE AND WILL NOT COMPLETE

On my IPAD 2 I started the UPDATE and is hung in the middle and will not complete. Bob Hopkins What did I do and I do not all the question you asked
<Edited By Host>

What is showing on your iPad's screen ?
If it's on the progress bar which hasn't moved for a while then try a soft-reset and see if that gets the update to complete : press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should reappear and it will hopefully boot up properly.
If it doesn't then try recovery mode and restore to your backup : If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
If it's showing something else ... ?
(For info you are talking to fellow users here on these forums, not iTunes Support nor Apple.)

I am unable to burn any info-photo ect on to a disk. I have a 27" I mac mid 2010 version. I put in a disk, hit burn, it runs for about 3 mins and ejects the disk sayiny there was an error with the drive and will not restart.

am unable to burn any info-photo ect on to a disk. I have a 27" I mac mid 2010 version. I put in a disk, hit burn, it runs for about 3 mins and ejects the disk sayiny there was an error with the drive and will not restart.

The optical drive has probably failed. It's a fairly common thing with these slim SuperDrives. Does it read any discs you put into it? You can try resetting the SMC and pram but I'll be surprised if it helps.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on
Resetting PRAM and NVRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

I changed emails. My user ID will not let me get into my phone to do any updates, but the user id is associated with an email address that no longer exists

I changed emails. My user ID will not let me get into my phone to do any updates, but the user id is associated with an email address that no longer exists

What a mess the Apple ID, and associating emails, ID etc has got itself in
I have a new iPad but after 2 days of trying all sorts still can't sync it because it is says it is associated to the other via the iCloud
I can't use my alternate email address to setup a new Apple ID account as it says it's already used or associated, but I haven't knowingly done anything
One message says "This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID."
I am at a complete loss on what to do

I have gone out of my way to buy an iPad 2 and you're telling me that I cannot have Siri, as you know iPad's are expensive, and you'd expect the newest updated whenever available. I am not a happy customer and will not but from Apple again.

I have gone out of my way to buy an iPad 2 and you're telling me that I cannot have Siri, as you know iPad's are expensive, and you'd expect the newest updated whenever available. I am not a happy customer and will not but from Apple again.

Lloyd Northover wrote:
I have gone out of my way to buy an iPad 2 and you're telling me that I cannot have Siri, as you know iPad's are expensive, and you'd expect the newest updated whenever available. I am not a happy customer and will not but from Apple again.
If you want to use the "newest updated whatever available." then you would have to buy the newest hardware that supports that. iPad 2 is not the newest hardware available and it can't/does not support siri.

I have bought and ipad first generation and i would like to put my ebooks on how can I do this please the Ibook app will not download on this ipad

I have bought a apple ipad 1st generation and I would like to put my ebooks on how would I do this the ibook app will not download on this ipad many thanks for any help offered

Try downloading the current version of the iBooks app on your computer's iTunes so that the app is in your purchase history. Then on your iPad go to the Purchased tab in the App Store app and see if you can download an older compatible version of it.
If the ebooks aren't ibooks, then unless they are digital-rights-management free epubs then you probably won't be able to add them to your computer's iTunes library (File > Add To Library) and sync them to your iPad - in they do have DRM on them then does the store that you got them from have their own app in your computer's iTunes ? If they then you could try the above and see if they have an iOS 5 compatible version available.

Now that i have updated to ios 6 on my ipad 2 a lot of my apps included the app store is not working properly! What could this be???

A lot of my apps are not running. I tried downloading an app from the app store and it give me a message saying "Cannont connect to iTunes store" and a few of the games and apps i downloaded wont open and/or load... This didnt start until i updated to ios6 how can i reverse this or what can i do to fix this error!!!?????

We have read that any apps that use the google map app (removed by ios6) will not work. We have lost a great camping app for this reason, and have heard that some weather apps are not working either. The company line we've been given is it's up to the app developer to rewrite their apps. ***** doesn't it.

HT201210 I was doing an update on my iphone and it stopped short of getting it all the way done. Now my phone is stuck with an itunes icon on the screen, and will not allow me to do anything with it. I tried shutting it down and restarting it...same icon

I tried to update my phone. The update didnt go all the way through, and ended up freezing the screen on my iphone with an itunes icon on it. I tried to reboot phone with no success...the icon stays on there with no other function of the phone available. Anybody know of a fix?

Put your iphone in dfu mode by doing this. Turn your iphone off. When its off, hold home and power button together for exactly 10 seconds, then release the power button and keep holding home button for another 10 seconds. Then open up itunes on your pc and plug your iphone to your pc. Itunes should recognize your iphone in recovery mode and it will tell you to restore it. Click restore, and your iphone will restore. Remember that, if you do this you will lose everything that was on your iphone. You can restore from backup later on. Hope I helped. If you have any questions or problems with this tutarial, you can contact me personaly on my email [email protected] . Hope I helped. Cheers

Help!- ipad was disconnected when updating software...now it won't recognize the ipad and can't complete a restore.It can't recognize the serial # or name,etc..

i was updating my ipad to the new ios software. the cable got disconnected just as it was completing the update. when it connected again it said i need to restore it. Once going thru the restore process, it said that Itunes can't recognize the ipad. one note, the ipad shows on my itunes as a "IPAD" and no name, serial #, etc... The ipad has a symbol on it telling me to connect to itunes

A System Reset cures many ills. It's easy, quick and harmless:
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
A System Reset does not remove any apps, music, movies, etc. nor does it cause any settings to revert back to default.
Also, you might wish to download the iPad-2 User Guide. Pay special attention to page 162. Note that this Guide also applies to the iPad-1 with IOS 4.3 except for those functions that are not supported by the hardware.
http://support.apple.com/manuals/#ipad
Finally, the User Guide can be downloaded at no charge via iBooks and a less comprehensive version of the Guide is included as a Safari bookmark.

Windows Update Error Code 80072F8F! I Did All The Steps And Will Not Fix Please HELP?

No one seems they can not help me fix this error code I did many things and not one person has really
helped me, I have a question at another forum but all they do is just ask me questions tell me steps to fix this but nothing worked at all, This happened on 8/30/2014 and ever since no one can help me fix this at all....I have no money to pay for the fix...I
am on very very low limited disability income, No credit cards nothing. I need help now I paid a lot of money for my Windows 7 Ultimate and now since 8/30/2014 I got that error code no one has helped me....PLEASE help me please....And I am not sure where to
go for help here thank you. I have done many things but nothing is fixing this issue. please help...And yes I did the clock and clock keeps perfect time, doing that clock did not fix this error code at all...

Hi Angelsims,
First I also want to get more information from you to help us to troubleshhot:
1.Did this error occur on a single update or multiple updates? please also post the update name in issue.
2.Please also post the steps you have followed to fix this issue.
In addition, please try to use the general steps to troubleshoot the windows update issue, and refer to the steps below:
The following outlines how to stop services pertaining to Windows Update, rename system folders, register related DLL files, and then restart the previously mentioned services. This troubleshooting generally applies to all Windows Update related issues.
Stopping services pertaining to Windows Update
1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2.     If you receive a notification from User Account Control simply click Continue.
3.     At the command prompt, type the following, commands and then press ENTER after each command.
        net stop wuauserv
        net stop bits
net stop cryptsvc
Please do not close the Command Prompt window.
Renaming folders pertaining to Windows Update
1.     At the command prompt, type the following commands, and then press Enter after each command:
2.     ren %systemroot%\System32\Catroot2 Catroot2.old
3.     ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
4.     Please do not close the Command Prompt window.
Registering DLL’s pertaining to Windows Update
1.     Please copy and paste the following text into a new Notepad document, and save the file as WindowsUpdate.BAT
2.     If saved correctly the icon will change from a Notepad file to BAT file which has two blue cogs as its     icon.
   -or-
3.     You can manually type each command at the command prompt:
         regsvr32 c:\windows\system32\vbscript.dll /s
         regsvr32 c:\windows\system32\mshtml.dll /s
         regsvr32 c:\windows\system32\msjava.dll /s
         regsvr32 c:\windows\system32\jscript.dll /s
         regsvr32 c:\windows\system32\msxml.dll /s
         regsvr32 c:\windows\system32\actxprxy.dll /s
         regsvr32 c:\windows\system32\shdocvw.dll /s
         regsvr32 wuapi.dll /s
         regsvr32 wuaueng1.dll /s
         regsvr32 wuaueng.dll /s
        regsvr32 wucltui.dll /s
         regsvr32 wups2.dll /s
         regsvr32 wups.dll /s
         regsvr32 wuweb.dll /s
         regsvr32 Softpub.dll /s
        regsvr32 Mssip32.dll /s
         regsvr32 Initpki.dll /s
         regsvr32 softpub.dll /s
         regsvr32 wintrust.dll /s
         regsvr32 initpki.dll /s
        regsvr32 dssenh.dll /s
        regsvr32 rsaenh.dll /s
         regsvr32 gpkcsp.dll /s
         regsvr32 sccbase.dll /s
         regsvr32 slbcsp.dll /s
         regsvr32 cryptdlg.dll /s
         regsvr32 Urlmon.dll /s
         regsvr32 Shdocvw.dll /s
         regsvr32 Msjava.dll /s
         regsvr32 Actxprxy.dll /s
         regsvr32 Oleaut32.dll /s
        regsvr32 Mshtml.dll /s
         regsvr32 msxml.dll /s
         regsvr32 msxml2.dll /s
         regsvr32 msxml3.dll /s
         regsvr32 Browseui.dll /s
         regsvr32 shell32.dll /s
         regsvr32 wuapi.dll /s
         regsvr32 wuaueng.dll /s
         regsvr32 wuaueng1.dll /s
         regsvr32 wucltui.dll /s
         regsvr32 wups.dll /s
         regsvr32 wuweb.dll /s
         regsvr32 jscript.dll /s
         regsvr32 atl.dll /s
         regsvr32 Mssip32.dll /s
Restarting services pertaining to Windows Update
1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2.     If you receive a notification from User Account Control simply click Continue.
3.     At the command prompt, type the following, commands and then
press ENTER after each command.
        net start wuauserv
        net start bits
        net start cryptsvc
   exit
Please try the steps above, if the step failed, please post the error or failure information.
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

HT4623 i updated my 5 and after i updated it asked me for a password i never had a password now i can't get into my phone what's up with that

I updated my 5 to ios7 after the install it asked me for a password i never had a password now i can't get into my phone

Hi,
Instead of using Adobe Reader try to convert your files through Export PDF.
Kindly refer to this link :https://cloud.acrobat.com/exportpdf
Please let us know if you require further assistance.
Regards,
Florence

TS2755 Since updating my iPhone 5 to ios7 my phone has trouble sending iMessages. Sometimes it won't send the message and will not automatically send it as an SMS despite this option being selected in settings. It's happening with 3 other people I know to

Since updating my iPhone 5 to ios7 my phone often fails to send iMessages. It won't automatically send as an SMS despite this being switched on in the settings section. This is also happening wig my partners phone and my mothers phone. I want to report it to Apple but I don't know how.
Firstly, is there a way this can be reported to Apple so they can fix the bug? And secondly, does anyone have any suggestions in relation to fixing this problem?
I usually love my phone but I am finding it unreliable at the moment and am wishing I didn't update it.

Restart your phone.
Apple Feedback http://www.apple.com/feedback/
Send a bug report via its Bug Reporter system.
To do this, join the Mac Developer Program—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that.
Once a member, go to Apple BugReporter and file your bug report. You get a response and a follow-up number thus starting a dialog with engineering.

HT4993 I updated to ios 7, put in a password but now it does not recognize the password and will not let me get into my phone. what do i do?

Similar Messages

Maybe you are looking for