HT5022 After setting up, no longer appears in either version of Airport but DOES WORK! Why?
After setting up, no longer appears in either version of Airport but DOES WORK! Why?
Hey Bob...
So far, using wireless only on the AirPort Extreme... (No Ethernet Devices or USB connected)
Yes to "create a wireless network".
My Cable Modem is the latest Motorola Docis 3, The APE is M8799LL/A Model A1034
Yes both versions...
More detail.... If I reset the APE, it shows up just fine in 5.6.
I go through configuration. I choose APE name, new wireless network, enter Wireless Network name and password.
Set for WPA.
Anyway, Airport 5.6 claims success and restarts APE. Never finds it again, (unless I reset it again. Went thorugh this process 3 times with same results... )
Anyway. the utility cannot "see" APE but my devices, (iPads, iPods, iPhone, Macbooks, Android devices as well), All can see APE and connect to it.
So, NOT major issue except that in order to make ANY changes to the APE, I must do a reset..
It's just WEIRD!
Similar Messages
-
Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
Documents say
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
But I can't see my iPad Mini in iTunes.
And my Ipad (Settings, General, iTunes Wifi Sinc) shows a message :" Sync will resume when xxx(my PC with iTunes) is available "...
Both are in the same network,
Ipad mini is is plugged in to power
. iTunes is open on the computer
what can i Do ???Hi Skydiver119, and tks for four interest.
I have done exactly as you say, but it does not work for me.
You indicated " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
I disconnect the wire,
and my iPad disappears from my iTunes screen.
in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
So, I can not sync via wi-fi
I appreciate if you can help me. -
How to I set an internal link in a PDF document using Preview? After setting a link under the Tools/Annotations menu, the link doesn't work and no detailed instructions are provided via the Help menu other than it showing the pull-down menu selection to make.
No. I am able to use the other features such as underlining, highlighting, adding rectangles and oval and save those changes.
-
does anyone have any idea how one can keep their data on iPad after leaving icloud as it appears that you loose all data when doing this...its killing me!!!
rtilghman wrote:
telling me to buy a new router is NOT a solution.
And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle? -
When I click on the iPhoto a gray appears along with the perpetual wheel but does not load. Any recommendations?
Assuming you're using iPhoto 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
I cant find my Airport Express any longer under Wi Fi in my iPhone but it works in ipad and my imac?
I cant find my Airport Express any longer under Wi Fi in my iPhone but it works in ipad and my imac?
I also get a message that I cant listen to music from itunes in my speakers in the other room that have been worked before?I have fixed it so wi fi working in my iphone by doing my Airport Express to Zero by a nail in the little whole...but still has problem to get out my music from my iMac from ituens to my speakers in my other room that was working before...
-
Has anyone started having trouble with google calendar syncing / showing up on their iPhone 4s or iPad 2? As of today it no longer shows up. Thanks.
Let me re-qualify my issue. Under my Google Calendar account I have the main calendar I originally set up when setting up my account. I then set up several other calendars under this same account such as events, work, family and so on. All the calendars showed up on my iPhone and iPad with no problem and worked great for a year and a half now until yesterday. My main calendar does still show up but the others no longer appear on my devices. Going on line to look at my Google calendar/calendars everything is fine with all of them. Any thoughts as to why they no longer show up on my iPhone or iPad? Thanks again.
-
I have had my MBP for just over 3 months now! Yes, I made the switch and up until now I have been quite happy.
I now have my Time Capsule, Apple TV running and am generally getting used to life as a Mac user.............even bought Aperture and loaded all the family photos. Now time to make some Travel movies.
I have been working on a particular IMovie project for a few weeks now. Size is 365MB. Yesterday I closed IMovie and when accessing later that project is not available in the Project Library window. It does appear in the IMovie Projects folder but I cannot open it. I have copied the file to DVD just in case. All up I have 4 Projects, the other 3 are practice files, smaller but they do appear in the Project Library.
I have scoured the bulletin boards and tried many suggested fixes to no avail. Main suggestion was to remove the following files from Library/Preferences
com.apple.iMovieApp.plist
com.apple.iApps.plist
However, this did not sort out my problem. In the end I put back the original files.
Does anyone have a straightforward fix for my problem or is this one of those ongoing issues that that needs Apple's attention.
After all the file is there with the others. They are available.
I realise that I can restore from Time Capsule but I am missing the last three days thanks to 'drop out'.
Thanks.......Gweggie Boy wrote:
Yes, considering we have an ongoing 'glich' within an Apple program with no obvious solution, we should be able to direct it straight to an Apple rep. I will peruse this possibility when I get a moment.
You can report the problem by providing feedback to Apple. In the iMovie app, from the menu select iMovie > Provide iMovie Feedback. This will take you to an Apple page where you can complete a form and submit it to Apple.
The fix for this will probably turn out to be simple/easy.....................so why doesn't Apple comment and/or address it????
Other than the forum moderators, Apple doesn't normally monitor these forums, nor make comments on posts. So, it's up to us to report the problem to them directly (using the feedback form mentioned above).
As the problem has affected me just the one time (touch wood), I haven't bothered to report it as yet. But, after seeing your posts on this, I'm now reconsidering that. Something must be triggering it. My system is in pretty good shape, so I'm guessing it must be a glitch of some sort, either in Mountain Lion or in the iMovie app itself. Perhaps it's a 3rd party app causing the problem? It doesn't give us much confidence now, in that we may start worrying about losing other projects.
A good practice is to duplicate the project from time to time (something I'll be doing more of), although Time Machine backups also provide the necessary security. To duplicate, in Project Library view (where all the projects are listed) click on the project name so that it is highlighted, then select File > Duplicate Project. Alternatively, right-click (or Control-click) on the project name and select Duplicate Project from the pop-up menu. Of course, you may already know this. Duplicating probably won't guarantee that the copy will not also disappear from the Project Library, but is worth doing anyway.
As I mentioned in the post I linked to earlier, when the problem arose with my iMovie project I was using ProRes 422 clips I had imported from a Final Cut Pro X Event. My immediate thought was that ProRes 422 had caused the problem. But this of course may have been coincidental - reinforced now by your experience, where you are probably working with Apple Intermediate Codec (AIC) clips.
Anyway, glad to hear that you've recovered your project through Time Machine. Unfortunately, I had to start from scratch as I had Time Machine turned off during my editing sessions (that's a story for another day).
John -
After setting stage.transform.matrix3d, mouse event localX/Y stageX/Y do not work
Hello
Because i need to do 3d transformation on the whole stage, i set the stage transfromation.matrix3d.
I made one test application and find that mouse event doesn't work properly.
In my application, i simply add a sprite containing red circle and test the functions.
Besides, i scale the stage along x-axis half using stage.transform.matrix3D
The problem is that when i click on my red circle, the e.localX/Y and e.stageX/Y are all zeros.
But if i click on places rather than my red circle be, the e.localX/Y and e.stageX/Y work fine.
Here is my code.
public function init():void{
var m:Matrix3D= new Matrix3D();
m.copyRowFrom(0,new Vector3D(0.5,0,0,0));
m.copyRowFrom(1,new Vector3D(0,1,0,0));
m.copyRowFrom(2,new Vector3D(0,0,1,0));
m.copyRowFrom(3,new Vector3D(0,0,0,1));
stage.transform.matrix3D = m;
s.graphics.beginFill(0xff0000);
s.graphics.drawCircle(0,0,50);
s.graphics.endFill();
addChild(s);
s.x = (stage.stageWidth)/2;
s.y = (stage.stageHeight)/2;
s.z = 0;
stage.addEventListener(MouseEvent.CLICK, onStageClick);
private function onStageClick(e:MouseEvent):void{
trace("global" + e.stageX + " " + e.stageY);
trace("local" + e.localX + " " + e.localY);1. In the code, I think it should change the value of the "player" so that it reflects the right turn. E.g. after the user press the mouse, the player should be changed to "computer" and after the computer goes, the player should be changed to "you". Otherwise, the player stays the same value and the program will only print out one symbol, which in this case is "O".
2. To make the previous moves stay, the code has to get some way to remember the moves. So before the repaint, the program will record the context for the next paint method.
Regards, -
The "Download As" is no longer there below the video.
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
You can try to change the protocol in the URL from http:// to https:// -
My ipod classic no longer appears in itunes on my mac, but it does appear in finder
I have tried all the steps at this link: http://support.apple.com/kb/TS3540
As well as those suggested by turingtest2 at: https://discussions.apple.com/message/17776595#17776595 (Check your ipod with Diagnostics mode)
I had:
Retracts: 495
Reallocs: 11
Pending sectors: 0
So I figure that there isn't a problem with my drive. But then the next step requires you to open itunes and access the ipod summary. But obviously this is useless as my ipod does not show in itunes. Though it does in Finder.
I have tried reinstalling iTunes, the apple mobile device drive, I've deleted the com.apple.usbmuxd.plist~orig and AppleMobileDevice.kext files, restarting my Mac disconnecting my ipod and quitting itunes in between to no avail.
This is ridiculously frustrating.
Other ipods load in my itunes so I'm assuming it is a problem with my ipod not my mac or usb port or whatever else I've been advised to check a million times over.
Help, please. I beg you.Hi there,
No I didn't. Someone suggested in another thread that my iPod was registering as a disk instead of a device, so if I removed my iPod as a disk on Disk Utility then it would reload etc. and show up in iTunes. Which it didn't, and instead just cleared all my music (16,000 songs).
So frustrating.
Hope if you have the same problem you are able to find a better solution! -
[solved] Password no longer works at tty, but does work elsewhere
Hi,
The other day I could no longer log in to a tty; "Login incorrect", but other users are fine. You're probably thinking I forgot my password, but I can confirm it is correct as I can log in as "user2", "su - jsteel", enter the password and it accepts it! After doing that I can run passwd (it asks for my current password) and it accepts it there too. I have not proceeded to change my password (which may well fix the issue) as I am interested to investigate what the problem is exactly.
Does anyone have any idea what could be wrong?
Thanks
Last edited by jsteel (2013-06-18 22:08:28)/etc/shells showed /usr/bin/zsh whereas my $SHELL was set to /bin/zsh. Updating my shell to /usr/bin/zsh fixed the issue! I guess it didn't like the symlink, I wonder why.
-
Adobe icon for pdf download does not appear on a website w/ FF, but does w/ IE,AOL, Chrome. Why?
Have been accessing monthly statements for more than a year, by clicking on the adobe icon in the download statement column, most recently in mid September, 2010. On October 4 I attempted to access September's info and the icon did not appear. I went thru tech support for the site and it was suggested that it could be a flash problem. We tried several corrections, reloading Adobe flash, checking pop up blocker,etc. When Chrome was loaded and the icons appeared, it was determined that the problem was thru FF. I later tried successful access with IE and AOL.
Since I had been successful for so long thru FF, what might have caused FF to fail in this small but important function? Other than usual updates, nothing was done on my part that should have affected my FF browser.Are you using the official Adobe website to download Flash?
*http://www.adobe.com/software/flash/about/
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html -
Hi,
I'm experiencing a strange behaviour recently. I wrote a feature with an EventReceiver that sets the masterpage and alternate css file for the current spweb it is activated for. When I activate that feature manually it works like expected. But if I include
the same feature in a SiteTemplate and it is called during site-creation, it doesn't work. I debugged it and stepped through it. As far as I can tell everything looks right. It sets the masterpage and css file like it should and throws no error. But when the
site loads in the end, it suddenly still uses the v4.master and no alternateCSS. How can that be?
If I deactivate the feature then manually and activate it again, it works...
Here's the feature:
const string masterPage = MyOfficeProcess.master";
const string searchMasterPage = "MyMinimal.master";
const string alternateCss = "MyOfficeAlternateProcess.css";
public override void FeatureActivated(SPFeatureReceiverProperties properties)
SPWeb web = (SPWeb)properties.Feature.Parent;
using (SPWeb topLevelSite = web.Site.RootWeb)
string relativePath = topLevelSite.ServerRelativeUrl;
if (!relativePath.EndsWith("/"))
relativePath += "/";
if (web.WebTemplate == "SRCHCENTERLITE" || web.WebTemplate == "SRCHCEN" || web.WebTemplate == "SRCHCENTERFAST")
web.CustomMasterUrl = relativePath + "_catalogs/masterpage/" + searchMasterPage;
else
web.MasterUrl = relativePath + "_catalogs/masterpage/" + masterPage;
web.CustomMasterUrl = relativePath + "_catalogs/masterpage/" + masterPage;
web.AlternateCssUrl = relativePath + "Style Library/My/" + alternateCss;
web.UIVersion = 4;
web.Update();Hi,
You can put a copy of your master page within the template site, use that for the site's master page, and then save the site as a template then check whether it works.
Here is a similar thread for your reference:
http://sharepoint.stackexchange.com/questions/30699/featureactivated-not-called-for-site-template
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support -
When turns on now it goes to choose language page and is just like a brand new ipod except I have no way of being able to put music on as I always get told to restore which doesnt solve problem
Do the iPod Disk Diagnostic as posted earlier by tt2, it wont fix your problem, but helps in troubleshooting.
Have a nice day!
Maybe you are looking for
-
What is the impact of using a variant data type on performance, speed memory demands etc?
This is another one of my "lets get this settled once and for all" threads. I have avoided variant data types whenever possible to keep the performance of my apps up. From some observatsions i have made over the years, I am of the opinion that; 1) In
-
Adding CMP-fields to a EJB in sun ONE studio 5
I have a CMP EJB, and initialized its fields against a table in a database (PointBase). When I later try adding additional fields, these fields naturally doesnt exist in the database. Then i make a test-module for the CMP EJB. When I try mapping the
-
Apple id showing up as somebody elses on my iphone 4?
My i-phone 4 is still showing up as my old apple id and email address from last year, this has been changed since early 2013, my actual apple id is correct on my settings but I cannot get it to disappear and it will not let me do any updates as I can
-
"Unable to move message to Trash" when trying to delete message on Apple mail default app
I have tried deleting and reading the account multiple times however the issue still persists. We are using Office 365 Exchange server. I have also tried setting the trash folder to sync.
-
My download did not work. how do i get the app i bought?
How do I get the app I bought but download failed, but is marked downloaded?