I cant find my Airport Express any longer under Wi Fi in my iPhone but it works in ipad and my imac?

I cant find my Airport Express any longer under Wi Fi in my iPhone but it works in ipad and my imac?
I also get a message that I cant listen to music from itunes in my speakers in the other room that have been worked before?

I have fixed it so wi fi working in my iphone by doing my Airport Express to Zero by a nail in the little whole...but still has problem to get out my music from my iMac from ituens to my speakers in my other room that was working before...

Similar Messages

HT4587 Utility cant find the airport express, windows8

Utility cant find the airport express, windows8

3 common causes when this occurs:
1) The Windows FireWall is blocking the connection attempt between AirPort Utility and the AirPort Express
2) The PC anti-virus software is doing the same thing
3) Microsoft Security Essentials....if installed...is doing the same thing
Check the settings in each application to see if a "block" is occuring, so you can make an "exception" or "allow" the connection to occur.
It might help to try a direct connection from an Ethernet port on the PC to a LAN <-> port on the AirPort Express. If you can configure the Express this way, you can disconnect the Ethernet cable once the Express has been set up.
Although primarily used for printer communications, it is a good idea to install Bonjour for Windows, as Bonjour may help communicatons on the network.
Bonjour Print Services for Windows v2.0.2 - Support - Apple

My airport express is still providing a link to my wifi network but I can't find my airport express on my macbook and i can't link to my bose speakers through it ... any bright ideas?

My airport express is still providing a link to my wifi network but I can't find my airport express on my macbook and i can't link to my bose speakers through it ... any bright ideas?

I'm not sure what you mean. You can't find the express to set it up.. or you can't find the network created by the express?

My airport express no longer shows up in Airport Utility since I got a new router.

Hi all, I'm scratching my head at this one.
For years I've had an Airport Express and it has worked fine. I was using it simply to stream music from iTunes on my PC as well as my iPhone and iPad to my home theater which is in a different room. I had a Linksys WRT150N wireless router, and the Airport Express would join my existing network and stream music via Airplay.
A few days ago I replaced my Linksys router with a Netgear WNDR3800, and the Airport Express no longer connected. I assumed I had to set it up again, but it is not even recognized by Airport Utility, so I can't get to the setup screen. I tried performing a soft reset, hard reset, and attaching the Airport Express to one of my Netgear's LAN ports via Ethernet cable, but it still won't show up in Airport Utility. The amber light just flashes on the unit and I can't access any setup screens.
Am I missing something obvious? All of the help tips assume the Airport Express at least shows up in Airport Utility. In my Airport Utility there is nothing to select and it says "AirPort Utility was unable to find any AirPort wireless devices. Make sure the AirPort wireless device you want to set up is plugged in and in range of your computer, and then click rescan to try again."
I am running a PC with Windows 7 and using Airport Utility v. 5.6.1 for Windows.
Thanks for any help!
-Rob

Did you try temporarily connecting an Ethernet cable from your PC to the AirPort Express to see if AirPort Utillty could "see" the AirPort Express that way? This method will work virtually all of the time unless the Windows Firewall or the PC's anti-virus program is blocking the connection attempt from your PC to the AirPort Express.
If you want to configure the Express using wireless only, you need to remember that when you reset the Expess back to default settings, it is now producing a wireless network with a name like Apple Network xxxxxx.
You must log on to the Apple Network xxxxxx wireless network first....no password is required.....and then open AirPort Utility so that your PC will establish a connection to the AirPort Express.
Once the AirPort Express has been configured to join your Netgear wireless network, you can log back on to your normal wireless network and all devices will be working with one another.

IBook not finding my Airport Express

I'm hoping someone can please help me. I have an Intel iBook and I had a power failure at my house the other day and for some unknown reason it no longer finds my Network. It finds others in the units around me but not mine. I know AX is working because my G5 iMac has no problems finding my network. Can anyone help?

Both my intel based Macbooks seem to 'lose' AE, sometimes what I do is get a direct ethernet cable from the AE to the offending MB then go through the Airport Utility in Applications/Utilities just to make sure the AE is working properly and then go trough the settings.
is it on the correct password type etc.
Then have a look at system preferences/Network and make sure you have the same corresponding settings as the Airport Utility by selecting Advanced button the near bottom right.
Some people are saying that you should run a Hex Password but I'm not certain it makes any real difference as I did that and my MBP still managed to lose AE yesterday. People are also suggesting soft resets and hard resets downgrading the AE firmware, giving sacrifices to the local Gods and Deities etc..
If you do a hard reset (unplug press the grey button in, plug back in still holding the grey button until you get fast orange flashes), it does work, that is until you put your personal security back, then it will mysteriously play hard to get again.
What I have found is that you can spend hours & hours trying to find your AE to no avail, or you can unplug it and come back to it the next day and all is fine as I have today. I have learned the hard way that patience pays off, if your iBook can't find your Airport Express simply unplug your AE unit & come back to it tomorrow, it is likely to find it again. Let me know if it doesn't and I'll endeavour to take you through the more involved methods described before (excluding sacrifices of course)
Good luck!

Airport express no longer recognized by macs, but still seen by iOS

Hello,
I have two airport expresses that I've been using just for streaming audio to two stereo amplifiers. They were working fine a week ago, both with Lion and with Snow Leopard. I have five macs in the house right now, running either of those OS versions. All have suddenly refused to recognize my two airport expresses. I can't find them using Airport Utility 5.6.1, which I think was recently provided by software update, so I downloaded an earlier version and it doesn't see them, either.
I have made a few changes recently, but none in the last week when the problem has started. A couple of weeks ago I went to a Vizio wireless router, because the airport express that I had been using for my wifi internet had begun to drop its connection. About 10 days ago I downgraded back to Snow Leopard because my white macbook was not performing well with Lion. But after doing so, the airport expresses were working fine in conjunction with the new router. Another computer running Snow leopard also refuses to recognize either Airport express, and there's been nothing done with that except to upgrade Airport Utility to 5.6.1. The macs in the house running Lion have Airport Utility 6.0, and they can't find the airport expresses either.
I have tried rebooting computers, and unplugging/reconnecting the airport expresses.
So you might think the problem lies with the Airport Expresses, but why would they both fail at the same time? And to add to the mystery, I find that my iOS 5.1.1 devices, including an ipad 2 and an iphone, both can recognize either of the AEs.
Thanks in advance!

Ok, found a solution. the wireless router sets up two networks, one at 5 ghz and the other at 2.4 ghz. I had been connected to the 5 ghz network. When I switched over to the 2.4 ghz connection, the Airport expresses became visible again. So, I guess the airport card sets its speed to receive the wifi network and as long as it's using that, can't communicate at a different rate for other devices?

Airport Express no longer joins network

Greetings, I have a cable modem internet connection; I use an older Airport Extreme (802.11n, without Time Capsule) to make a local wifi network with WPA2 Personal security, and an older Airport Express (802.11 b/g, firmware 6.3) to connect a laser printer in a different room.
All was working well until two days ago when access to the internet disappeared. I reset the modem, confirmed that the cable connection was working by plugging a laptop directly into the modem by ethernet, determining that the problem was the Airport Extreme. I discovered the 7.5.2 firmware update which I uploaded, and all seemed well.
However, the 27" iMac upstairs only connected to Airport intermittently; it appeared to have been duplicated in name, as well as only recognized the Airport Express. I've since been able to correct that problem, however, now the Airport Express no longer connects to the Airport Extreme network.
I've tried soft resets (unplugging then plugging back in) and hard resets (pressing the reset button with a paperclip until the amber light flashes, then reconfiguring the device). I've tried setting the Airport Express both just to join the network (printer sharing) as well as extend the network; I also reverted the Airport Extreme's firmware to 7.4.2 which works perfectly well. However, now after each successive attempt to reconfigure the Airport Express to join the network, Airport Utility says that the Airport Express has been successfully updated and will restart, which it never does - it simply flashes an amber light, and Airport Utility eventually times out and says that it was unable to find the Airport Express after restarting, noting that the settings have been successfully updated, but that there is a problem re-joining the wireless network/finding the device. Notably, the Airport Express no longer appears in the left hand list of wireless devices in Airport Utility.
Help!!

Hi pslebow,
You make it sound like there was no change, then suddenly the Airport Express 802.11g lost connection to the wireless network and you can't get it back.
What network security is your wireless network using?
From the specification sheet, "…When joining an existing wireless network, AirPort Express only supports WPA-Personal."
AirPort Express - Technical Specifications
Please make sure your router security is set to match.
iOS and OS X: Recommended settings for Wi-Fi routers and access points - Apple Support
If you have older Wi-Fi devices on your network that don't support WPA2 Personal (AES), a good second choice is WPA/WPA2 Mode (often referred to as WPA Mixed Mode). This mode will allow newer devices to use the stronger WPA2 AES encryption, while still allowing older devices to connect with older WPA TKIP-level encryption. If your Wi-Fi router doesn't support WPA/WPA2 Mode, WPA Personal (TKIP) mode is the next best choice.
Best,
Nubz

Why can't my MB Air's Airport Utility find my Airport Express?

So I just got a Macbook Air for college and an Airport Express so I could have a secure connection to the internet, but after trying to set it up in my dorm, Airport Utility can't find it. I plugged in the Ethernet cable that is hooked up to the wall's Ethernet outlet in the WAN port and then I plugged the Airport's power cord into the power outlet and it's light turned solid green and it was ready to go. Then I go on my Mac and open Airport Utility and it tells me that no configured Airport base stations have been found, but it will continue searching. The Wi-fi on my computer is turned on, the Airport is in good range and is not anywhere near a radio or microwave or metal, and my college does not prohibit personal routers, there are tons already on my floor. How do I fix this? Class starts soon
If this is any help, I have Airport Utility version 6.3.1 and an Airport Express 802.11n wi-fi

In order for the AirPort Utility to find the AirPort Express it must be connected to either the Express' wireless network or to its LAN port. By default, the Express will broadcast an unsecured wireless network with a Network Name of something like: Apple Network NNNNNN. Can your MacBook Air see this network?

Airport Utility cannot find my Airport express on Windows 7

   I have a working Airport express with a static ip address. The static ip address has been hard coded in my main router. The airport express is connected to my network via ethernet cable. Airport Express Version 7.6.1. I am having conectivity issues from my new Windows Desktop. The airport utility 5.6.1 on my new desktop cannot find my airport express. The manual setup button has been greyed out. I can ping the device. I can click on "configure other" and configure the airport-express (which is how I set it up).    If I reboot my desktop and then quickly fire up the airport utility, it finds the device. On hitting rescan, in a few minutes everything gets greyed out again.
The airport utiltity on other computers is able to find that airport express.   I am able to stream music through the airport express from other computers in the network.
How do I find out what is blocking the airport utility on my new desktop. The Bonjour Service is up and running.   Any help/advice on trouble shooting this issue is appreciated.

The airport utiltity on other computers is able to find that airport express.   I am able to stream music through the airport express from other computers in the network.
You only need one computer on the network to access the settings in the AirPort, so unless you like to look for things, it is probably not worth the effort to try to troubleshoot the blocking action on the Windows 7 machine.
It is not always the Windows Firewall and/or the anti-virus program that blocks connection attempts like this, but that would be the first place to look.
In general, you have to get into the Firewall settings to create an "exception" for the AirPort connection. The same would be true for the anti-virus if that is what is blocking the connection attempt between the PC and AirPort.

Cant see my airport express

Hello, can somebody offer some advice?
I have a PC and a airport express which worked fine originally. They now dont like each other!? The PC seems to recognise the 'apple wireless network' but when using the admin utility (& set up assistant) I cant see my airport express.
Just the dreaded flashing amber light.
Have tried re-installing both my wireless network card and airport software but no luck.
Any advice?
Advent Windows XP

Found ip address solution in another site - ref allocating ip address manually (not dchp) see my other posts for details.

Airport utility can not find my airport express...

Airport utility can not find my airport express...
I was trying to connect a PC (Windows XP) laptop to my wireless network via the airport express.
I have a Mac with an airport that I use to get internet in my other room. I am trying to get internet on the laptop too.
I somehow manage to erase my network & now my airport utilities won't even scan/recognize my airport??
ANY help would be appreciated, mac helpline wanted $59 to help & I live in a small northern community where they do not have anyone that will address a Mac issue!!
Thanks for your time.

Thank you SO MUCH Tesserax for taking the time to help!
I powered everything down, slowly powered everything else up from the modem to the airport then the computer. I then reset the airport & rescaned it through utilities. I set up a new network & voila! wireless up & running again.
I am going to try to connect the laptop to the network now.....well, mabey tomorrow night, I've had enough for 1 evening!
I will update....or possibly be begging for more help...we'll see!
Thanks again for your time!

Airport utility cannot find my Airport Express, repeated rescans, nothing, even with direct connect via Ethernet. Help!

I use Airport Express to stream iTunes to my home stereo. This is the ONLY thing I use it for. It quit working and now Airport Utility cannot find the Airport Express unit, even after repeated re-boots of all components, resetting the Airport Express, even when connected directly to my router via Ethernet. I use a D-Link wirless router.
I downloaded the latest Airport Utility, but it will NOT work with XP (from the Apple website, not my words).
The Airport Express will achieve a solid green indicator after reset, but Airport Utility cannot find it. Until Utility can find and recognize the Airport Express hardware, I cannot adjust or reset any settings, etc.
Help!

I downloaded the latest Airport Utility, but it will NOT work with XP (from the Apple website, not my words).
The latest version of AirPort Utility.....5.6.1.....will only run on a Windows 7 machine.
Try AirPort Utility 5.5.3 for Windows (make sure that you have Service Pack 3 installed on your PC, otherwise the application will not run on an XP machine).
The Airport Express will achieve a solid green indicator after reset, but Airport Utility cannot find it.
After a "hard reset" or "factory default reset", the light will not be green.....it will be slowly flashing amber after it restarts. See this Apple support document for more information on various resets:
Resetting an AirPort Base Station or Time Capsule FAQ

My airport utility does not find my airport express device

My airport utility does not find my airport express device

In order for the AirPort Utility on your iOS device to find the Express, both need to be connected to the same Wi-Fi network. By default, the Express will broadcast an unsecured wireless network with a network name of something like: Apple Network NNNNNN. Can you iOS device find this network?

I have photoshop C6 on my MAC Pro and want to install it on my new MAC desktop. I sent the files with AirDrop but photoshop wont open I get an error message that it cant find the Library. Any thoughts?

I have photoshop C6 on my MAC Pro and want to install it on my new MAC desktop. I sent the files with AirDrop but photoshop wont open I get an error message that it cant find the Library. Any thoughts?

download the installation files and install using your serial number or adobe id,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

My firefox wont load any page. Says it cant find the server of any of them. I can view the same pages in safari. I just updated to 3.6.7 and now having this problem. What is happening?

My firefox wont load any page. Says it cant find the server of any of them. I can view the same pages in safari. I just updated to 3.6.7 and now having this problem. What is happening?
== This happened ==
Every time Firefox opened
== Today ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16

Read this somewhere else: Can't find it again so can't reference - apols.
fixed by entering
about:config into the nav bar
toggle dom.storage.enabled to 'true'
worked for me - but don't know what it does or why :)

I cant find my Airport Express any longer under Wi Fi in my iPhone but it works in ipad and my imac?

Similar Messages

Maybe you are looking for