HT5760 I am not getting the Leave Conversation option in Group Messaging in iOS 8

I am not getting the "Leave Conversation" option on Group Messaging on some group messages.

Hello tchadden,
This option is only available if there are more than three people in the group iMessage or if the group message uses MMS.
Leave this Conversation might not be available if there are only three people in the group iMessage or if the group message uses MMS.
Send a group message with your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5760
Cheers,
Allen

Similar Messages

Not getting the leave details in the WF12300111

Hi all,
Am using the standard workflow 12300111 for the leave reuest in ESS.
The supervisor of the workflow initiator getting the leave request but he is not able to view the leave details and the leave type. The supervisor is getting only the employee details.
can anyone guide me to resolve dis issue?
Thanks,
Ravi.

Hi Ravi,
Kindly check that in the Binding you are passing all the required data that needs to be transferred from 1 container to another. The Supervisor is not able to see leave Details because you have not passed them correctly in the Binding.
Let me know if it helps and even if you have any doubts
With Best Regards,
Kanika

After purchasing an Adobe PDF Pack, I do not get the Content Editing option in the Tools bar of my PDF I use a MacBook Pro- please advise

I use a MacBook Pro
After purchasing an Adobe PDF Pack, I still don't get the Content Editing option on my Tools bar
please advise

Thanks Sara, however my understanding is what I purchased enabled me to
convert pdf into word for editing, please see screen shot attached. I
believe this shows that in the PDF Pack which i have purchased I am able to
do this.
Please further advise
Cheers
Therese
Therese S
[private information removed by moderator]
On Thu, Mar 12, 2015 at 5:48 AM, Sara.Forsberg <[email protected]>

Hp all in one 19-2013w and 19-2113w , that in the Bios i am not getting the legacy support option

i want my system to be boot from the USB Drive - but Legacy support is not avialable in the Bios and that i why in the boot menu i am not getting my USB option Model no : Hp all in one 19-2013w and 19-2113w

Same here. My computer was "born on" Aug 13th, 2014, so today it's exactly only 2 months old. Since Windows 8 was so sluggishly slow i decided i was going to wipe the drive and install Linux. I had already been successful doing the exact same thing with a new HP laptop about 1 year ago.. it also was a Windows 8 preloaded machine, so i am very aware of the UEFI "Secure Boot" methodology and what it took to disable secure boot mode and enable legacy mode. I am happy to say that laptop ran Linux beautifully and without any issues. So now, i have the HP AIO 19-2113w machine preloaded with Windows 8.1, which has been wiped. I have converted the GPT to MBR and attempted to disable secure boot mode and enable "legacy mode". The Legacy mode option says i must first disable secure boot mode, which i've done several times. (When restarting after doing so, i get a prompt to type in the 4 digits on the screen and press enter, which i've done several times now). Going back into bios after doing this... i STILL can't get past the "You must disable secure boot mode before using this option... blah blah.". So i decided to look up if there were any lawsuits against Microsoft and/or HP reguarding UEFI bootloading issues, and there are. Right now i am sitting on a 2 month old computer with NO operating system and no recovery partition. The money i spent on this computer could have gone towards a different brand, such as an Asus which has never given me trouble. You guys need to contact me ASAP with a fix, or you'll get plenty of free negative advertising.

Why can I not get the green widget to activate on messaging?

On my i pad mine when messaging the green widget will not activate so I can only do i messaging which means my non apple friends are not contatctable.

You may want to try 3rd party apps like TextMe for your non-Apple friends.
https://itunes.apple.com/sg/app/textme-free-texting-international/id338088432?mt =8

9500hdn. I can not get the two sided option to appear while printing booklets MAC

laserjet 9500hdn How can I get twosided to appear in booklet printing. Not duplex.

Hi,
I assume you are using a Mac based on the post title... please clarify your Mac OS version if those steps does not apply for you.
While launching the Print Dialog, click the lowest selection box (Usually will be listed as the Application name, from MS Word will appear as Copies & Pages)
Click Layout.
Set Two-Sided as Long-edge for protrait printing.
Click Booklet Printing.and set the references according your needs.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Why do I not get the checkout option for a pdf type document when clicking on the document link in the SharePoint workflow task?

We are trying to use workflows to review and edit pdf files in sharepoint 2010. We are having a couple of issues and am hoping someone has the answer.....
1) When myself and coworkers click on the pdf document in the library, we get the check out option as expected. However when we click on the document
link in a workflow task (on the sharepoint site), the pdf opens as a temporary file and we do not get the check out option. Why does this happen?????
2) The same thing happens when we click on the document link in the workflow task email; HOWEVER, one of our co-workers does get the
check out option when clicking on the link in the email task. Why would she get the checkout option using the email and not when clicking on the link in the task list on the sharepoint site ???? We have compared our internet settings and adobe
settings to ours and found no differences.
We are using Sharepoint 2010, Windows 7, IE8, Adobe Reader X or XI. Some of us have Adobe Pro X and have the same issues.

Hi,
According to your post, my understanding is that you could not get the checkout option for a pdf type document when clicking on the document link in the SharePoint workflow task.
I try to reproduce the issue, however, no matter when I click the pdf type document in the library or click on the pdf document link in the workflow task email, it download the pdf doucment and then I can open it.
It will be better if you can descript how you
get the check out option as expected when you click on the pdf document in the library.
Then I upload a
word type document to the library, no matter when I click the word type document in the library or click on the word document link in the workflow task email, I can open the word document directly and get the check out option as expected.
I recommend to use the other type docuemts to check whether the check out option works.
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Why do I not get the checkout option when clicking on the document link in the SharePoint workflow task?

We are trying to use workflows to review and edit pdf files in sharepoint 2010. We are having a couple of issues and am hoping someone has the answer.....
1) When myself and coworkers click on the pdf document in the library, we get the check out option as expected. However when we click on the document link in a workflow task (on the sharepoint site), the pdf opens as a temporary file and we do not get the check out option. Why does this happen?????
2) The same thing happens when we click on the document link in the workflow task email; HOWEVER, one of our co-workers does get the check out option when clicking on the link in the email task. Why would she get the checkout option using the email and not when clicking on the link in the task list on the sharepoint site ???? We have compared our internet settings and adobe settings to ours and found no differences.
We are using Sharepoint 2010, Windows 7, IE8, Adobe Reader X or XI. Some of us have Adobe Pro X and have the same issues.

No the person who can check out using the link in the email has the same permissions as me. We have looked at all kinds of settings, profile etc and nothing evident can be determined to explain the reason. However, one difference we did notice is that this person does not have a default web browser set and thus when clicking on items to open, it always pops up a dialog box asking which program to use to open it with. This person chooses Adobe Reader and it opens on the Sharepoint server as it should and she gets the checkout option in a dialog box just like clicking on the document in the library. My theory is that this step of choosing the program to open with is interrupting the typical way a pdf file is handled when clicking on URL links to the document, which is…. it is opened as temporary internet file rather than on the Sharepoint server. Hopefully someone can figure this out ☺

FAGL_FC_VAL in ECC 6.0 M not able to get the dynamic selection options

Hi
While executing the transaction FAGL_FC_VAL in ecc 6 we are not getting the dynamic selection option same as ecc 5 we need business area as selection option.
Please provide solution.. if any note to be applied we will do that. we have recently migrated to ECC 6.0
Regards,
Abhijeet

Sorry. This typo was only in this forum message. Within the BPEL process it's :
<from expression="ora:countNodes('inputVariable','payload','/ns1:Transmission/ns1:TransmissionBody/ns1:GLogXMLElement/ns1:Release') "/>
Still 0 count.

Leave conversation option unavailable

I was sent a group message from a unknown number and there are 10 other strangers in the message. I want to leave it but I can't. I have a new iPhone 6 so it has iOS 8 but the leave conversation option isn't there? Some people have the option greyed out but the button isn't there at all..
Why can't I leave and how can I fix this?
Is anyone else having this problem?
Thanks

Hello cchau13,
Thanks for using Apple Support Communities.
To leave a group message in iOS 8 please do the following:
Leave a group. Tap Details, then tap Leave this Conversation.
Send and receive messages
Take care,
Alex H.

DO NOT Get The Service With This Company IF You Want to Receive a Good Customer Service

It is really a pain, dissatisfaction, and a lot more when you have Verizon as your service provider. I have been having service for my cellphones with Verizon for over 3 years, and did not have any major problems, so when I moved to my new place I thought it’s better to get the Fios, and have one bill for my all Verizon services. I went online and started to order my products online. During ordering, the chat session opened and I started chatting with the Customer Service Rep in order to get help through the process. When we were in the step that I could order the home phone plan, I saw the International World Plan, and I asked the lady to give me some information about this plan. I asked her that I want to call to my country and I mentioned my country’s name to her as well. I asked her that if this service is available for my country, and she said “Yes” you can call to over 100 countries with this service and she encouraged me to get the 300 minutes service. Since the plan sounded good to me I decided to get the 500 minutes instead of 300 min, and after I ordered my plan, I started calling overseas, and happy that I am paying less than the Phone cards with this plan. On March 26 I received my bill, and saw that Verizon charged me 142 $ for the less than 200 minutes that I called to my country, and there was a Letter “N” in front of each phone calls. I checked the guide to see what does “N” mean, and I saw that it said N means “Denoted calls are NOT listed in World Plan”. Well, thanks to the lady who gave me the wrong information while I was ordering my plan online, but she or the Verizon company is not that much lucky because I printed my chat session the day I ordered my plan since I wanted to have the information of what I actually had ordered. That time I did not think that I may get in trouble like this. Since March 27th, I have been calling Verizon every other day, and I have explained my issue to more than 10 Customer Service Reps, and each of them asked me to fax my chat session to them. I have been faxing that to all the numbers that they gave me, and I am keep faxing them, but do not get any respond. One of the Verizon’s Supervisors, whose name is Mark, called twice on my home phone number during the daytime, around 3 pm, and he left massages. On his second massage, he said that he checked the plan and my country is not listed in the International World Plan. He just said this, and he said that he was going to call me back, but never happened. He also did not leave me any phone number that I could call back. Also, since my cellphones are listed in the same bill as my other products, he could easily see the other numbers that he could call and reach me, but he did not bother himself to do so. I have even changed my home voice mail greeting addressing to Verizon, and left my cellphone number in voice mail greeting. I am so sorry that I have to say this, but this seems a definite fraud to me. I did not know about this plan, and I asked the Customer Service Rep to help me. She was responsible to check my country, or at least let me know how I could find out about the coverage. This is ridiculous, and if Verizon cannot take over this problem, my lawyer will take the action over, and takes the issue to their corporate court. I am not going to give up about this, and I decide to give Verizon about a week or so to solve this issue, but I won’t wait more than that. Just a friendly advice to people who want to get the home service through Verizon: DO NOT Get The Service With This Company IF You Want to Receive a Good Customer Service. There is nothing about taking care of customer in this company, and you are going to be stuck with what you get.

Mahsa21,
We are glad that we were able to resolve the international calling plan issue for you. If you need assistance,please reach out to us.
thanks,
Tonya D.

I can not get the ringer symbol off of my home screen on a frequent basis.

I can not get the ringer symbol removed from my home screen on a frequent basis. I have tried pushing the volume keys and the mute button, but nothing helps.

Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.

Refernce Nav igational Attribute is not getting the data in Infoprovider

Hi,
I am facing the issue with Reference Characteristic which is a navigational attribute for which data is not getting populated in the cube.Please find the below scenario.
We have three characteristics 0RECV_WBS_E , 0WBS_ELEMT, ZPSBUSA .Char 0RECV_WBS_E is reference of 0WBS_ELEMT.
0RECV_WBS_E__ZPSBUSA,0WBS_ELEMT__ZPSBUSA are the Navigational attributes of ZPSBUSA, these two are maintained as Navigational attributes in the cube and at info object level. The Nav Attribute 0RECV_WBS_E__ZPSBUSA is not getting the data in infocube where as 0WBS_ELEMT__ZPSBUSA is getting the data .The data is available for the two Nav attributes in the info object ZPSBUSA .Can you please suggest why this reference Nav attribute 0RECV_WBS_E__ZPSBUSA is not getting data in the infocube.
Thanks,
SUbhash

Hi,
I am facing the issue with Reference Characteristic which is a navigational attribute for which data is not getting populated in the cube.Please find the below scenario.
We have three characteristics 0RECV_WBS_E , 0WBS_ELEMT, ZPSBUSA .Char 0RECV_WBS_E is reference of 0WBS_ELEMT.
0RECV_WBS_E__ZPSBUSA,0WBS_ELEMT__ZPSBUSA are the Navigational attributes of 0WBS_ELEMT, these two are maintained as Navigational attributes in the cube and at info object level. The Nav Attribute 0RECV_WBS_E__ZPSBUSA is not getting the data in infocube where as 0WBS_ELEMT__ZPSBUSA is getting the data .The data is available for the two Nav attributes in the info object 0WBS_ELEMT .Can you please suggest why this reference Nav attribute 0RECV_WBS_E__ZPSBUSA is not getting data in the infocube.
Thanks,
SUbhash
Edited by: MarkSubhash on Dec 9, 2011 11:11 AM

I am not getting the data in Bex from the cube

Hi Experts,
i am not getting the data from the cube to Bex,
cube having the data, but i am not able to see this data in the Bex result area.
Can any one help me.
Best regards,
Bhaskar

Hi
In the manage cube, is reporting symbol is there for your requests
If you have any red requests delete them and refresh
If all requests having reporting symbols you may check the BEx without any filters or selection criterions
Regards
N Ganesh

Iam not getting the data on screen after using the user exit zxpadu01

Dear Freinds
            As per my requirement when the user enters value Ansal it should get defaulted to Amount field (bet01 ) based on the wage type
i have written calculation ( q0008-bet01 = ansal/100) before it getting defaulted to bet01, i found that value is not getting default on the screen for bet01 once i enter value for Ansal , please any body correct my code
in   ZXPADU02 i have written the code as below :
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.   -- HERE I GOT ALL THE DATA EXCEPT BET01
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- HERE I CAN SEE EVEN THE BET01 IS FILLED
IMPORTING
prelp = innnn.         --- HERE I CAN SEE LGART BUT NOT AMOUNT VALUE
endif.
when others.
endcase.
IN ZXPADU01 I HAVE WRITTEN AS BELOW:
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008   --- I CAN SEE ONLY WHEN I COME AGAIN
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
Now my problem is as follows :
               i have entered the value for Ansal (ex: p0008-Ansal = 1000) ..........and i say enter then i should found the calculated value for the ansal through my coding
and it should display in bet01 as 10 ( q0008-bet01 = p0008-ansal /100)
but i dont find the value 10 being displayed for the field bet01 on the screen when
user enters Ansal as 1000 .........even then i have saved it to test the scenario......
now i came in displayed mode (pa20 ) for the infotype 008 for the same personnel no for the same dates .....where i created the record........i found that the value
bet01 is there i.e i can see the value bet01 as 10 ( my requiremnt here matching)
but when the user say enter during the time of creation of the record the value
bet01 is not getting defaulted with 10 .........why iam not able to understand
PLEASE ANY BODY HELP ME IN THIS REGARD
regards
shanti.

Hi Pranesh,
               i have used the logic which you hav given as below
in ZXPADU02
FIELD-SYMBOLS <fs> TYPE ANY.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount . --- amount as (ansal /100 i.e 1000/100 = 10) 10
endif.
still iam not getting the data for the field bet01
this is the coding i am using
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
FIELD-SYMBOLS <fs> TYPE ANY.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount .
endif.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
please help me as iam still not getting (value in bet 01) when i press enter once i enter value in ansal feild.
regards
shanti.

HT5760 I am not getting the Leave Conversation option in Group Messaging in iOS 8

Similar Messages

Maybe you are looking for