HT6065 enhanced dictation stopped working after this update

Hey all,
After 10.9.1 enhanced dictation no longer works, fn fn pops up the mic, but as soon as it makes the connection it drops off. Regular dictation is fine. Anyone else having this issue/solved it?
Thanks!

I have not tried that lol, derp-da-derp.
didnt even think of that, the path if anyone is looking to try this. ~ System > Library > Speech > Recognizers folder and remove the folder called "SpeechRecognitionCoreLanguages."
Downloading at the moment, will see if it works!
Thanks Eric!!

Similar Messages

HT1222 Anyone having trouble with this update? My open / save dialogs stopped working after this update...

Affected applications seem to be Rosetta ones...
HT1222: Apple security updates

Security Update 2012-001 Bricks Rosetta programs
Restore method.
#1 Backup your personal data off the machine.
Backup files off the computer (not TimeMachine) and disconnect. If you don't have a external drive, get one and connect to the USB port and simply drag and drop copy your User folder to the external drive, it will copy all your files. But installed programs are more complicated and best left to reinstalling via original sources.
#2 Try Restoring from a TimeMachine or option bootable clone
If you have TimeMachine drive, or a hold the option key bootable clone use that to erase and restore from.
Note: A TM restore can take a awfully long time, a clone restore takes under 2 hours in most cases.
#3 Reinstall OS X 10.6 from disk
If no TM or bootable clone then:
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility to >Repair Disk and Permissions (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: If Disk Repair gives a error that is not repaired, then you have to consider erasing the drive (with Zeros) and try reinstalling 10.6 fresh or replacing the drive.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#4 Update to 10.6.8 without Security Update 2012-001
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001.
#5 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason.
If you get gray screen at any time when booting (possible it might occur when you reinstall old programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
#6 Learn how to have a OS X drive restore ability using TimeMachine or cloning software
Learn how to clone here
http://www.bombich.com/get_ready_for_lion.html
TM help here
http://pondini.org/OSX/Home.html
#7 Make copies of your original Snow Leopard
Learn how to make copies of your 10.6 disks here
http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
Learn how to make a bootable SL USB
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
#8 Deciding on upgrading to Lion?
Learn which programs ARE NOT compatible with Lion
http://roaringapps.com/apps:table
#9 Unverified hacks
Note: You may see a "hack" for this issue floating around, it has had mixed results as people's software is different.
You may want to try it, but it's at your own risk. It has worked fast for some and not at all for others, hopefully over time it will work for all.
The above methods I outline are Apple approved restore methods + based upon experience here and not a quick fix, but are sure to work as Apple recommends such steps themselves.
https://support.apple.com/kb/TS2570
If at any time you feel this is beyond your capability, please seek local professional assistance before you lose your data.
Please maintain at least a TM drive, just hook up a external drive and TM will ask you to make a backup
If your a bit more skilled, a option bootable clone is much superior than TM drive.
Good luck
<Edited by Host>

My wifi stopped working after a update last year and I have updated since, can this be fixe

MMy wi fi stopped working after a update early last year and I have just made do since then by using i pad at home. I was going to upgrade my phone but need to clarify if it was the upgrade that broke my wifi and can it be fixed? I have heaed of Apple replacing phones affected by this problem. Please help

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If those solutions don't work your iPhone 4s has developed a hardware problem. The permanent solution is to get it replaced. I have not heard of Apple replacing long out of warranty iPhones.
You can search the internet for heating and freezing solutions that might work (at least for a while).
For example, see here: https://www.youtube.com/watch?v=nj10bz5bI6A

BoardMaker plus 6 stopped working after OS update

My Boardmaker Plus stopped working after I update my system to OSi Yosemite. The disk just spins and spins and the program does not come up? Is anyone else having this problem? How can I fix it. I need to use the program for work.

I was worried about this, I still haven't upgraded. But while doing research I saw that there is now an online version, I wonder if it's the same ...

I have a brand new iphone 5 it just stopped working after i updated to the 7.6 help?

i have a brand new iphone 5 it just stopped working after i updated to the 7.6 help?

Connect it to iTunes on your computer and Restore it. See: http://support.apple.com/kb/HT1808

HT4650 My keyboard has stopped working after an update of Flash Player. Help! What can I do?

Why has my keyboard stopped working after Flash Player update?

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do things work in Safe Mode?

N95 Map stop working after firmware update

I have the N95, just update the firmware with the latest (04/25/09), the map App stop working today… it work after the update… it will not load and when I try to reload the map to the phone via Map loader it sees the phone the says it can’t read the license information…
Need help please.

have u tried reinstalling the maps application?
u can get the latest maps application update from http://www.nokia.com/maps
download the application associated with ur n95 and install it using the pc suite application
if my post helped u out, please click the Star next to it to add some KUDOS to my name

My Ipod touch email stopped working after installing Update

my Ipod touch email stopped working after installing the latest firmware update from Apple what should I do?

Hi, jewlssch.
Thank you for visiting Apple Support Communities.
If the Mail application will not launch, I would recommend processing any available updates on your Mac Pro and test launching Mail. If the issue persists, process a reinstall of Mavericks.
Reinstall OS X
http://support.apple.com/kb/PH10763
Make sure to backup all of your data prior to reinstalling OS X 10.9.
Back up your Mac
http://support.apple.com/kb/PH11371
Cheers,
Jason

Dictation stopped working after OS X update. Any idea why?

Mac was having dictation problems to the point where pressing the Fn twice would only lead to a "bing" and nothing more. I took it to the Apple store, they ran their diagnostics to the point of restoring the OS and it still didn't work. I had the Mac exchanged becasue Apple said it sounded like a hardware problem. It worked in the store but at home, after the OS X update and iPhoto update, dictation is back to being a "bing" sound.
I've read several threads about people who have it come up and then it goes away, and so forth. Mine doesn't even come up. I also tried different addresses in DNS and nothing works. Any advice/support would be appreciated.

If you us Webfoot, this may be this cause....from Webfoot website:
This solution addresses Webroot SecureAnywhere for Mac OS X 10.7 and higher
Due to the unique way in which keyboard shortcuts work on the Mac OS, the secure keyboard entry feature may prohibit shortcut functions in a variety of applications. This includes, but is not limited to, Adobe Creative Suite Products, Macro applications, or some built in features that are triggered by key combinations—such as Dictation and Speech.
This can be resolved by clicking the Webroot icon located on the top right of the menu bar, then clicking Pause Secure Keyboard Entry.
Once activated, you will see a checkmark next to the menu option. While this is selected, Webroot SecureAnywhere will not secure keystrokes against keylogging software, though it will still be actively protecting you against infections. It is important to ensure that this function is enabled when browsing the internet—particularly on secure sites that require a username and password.

Acrobat XI Stopped working after CC Updates

RANT: It's happened 3 times now, and I'm getting fed up of the Adobe support - very disappointing. I don't think they know how to handle issues, and sometimes wonder if they even know the basic difference between hold and disconnect. Numerous times I have contacted them, after chatting with them for a few minutes, they say that they have to trasnfer me to the technical support, and then I get disconnected. Then the next guy has to start all over again with the same questions. Horrible.
Ok, rant is over (for now), hopefully this forum is more helpful.
ISSUE: last few (3) times I have noticed that when I update my Creatve Cloud panel, my Acrobat stops working. I'm not entirely sure if this is related to the CC panel update, but that's what it seems to me right now. So, after numerous chats with the Adobe chats, and my own office IT, I (myself) figured out that the issue could've been because I see 2 Adobe Acrobats installed on my system. The screen cap below shows what I mean.
Last 2 times I uninstalled both, and reinstalled the Acrobat from the CC panel again, and it worked. But this time it just dind't. And I've been totally unable to solve the issue with my IT and Adobe's support so far.
So, what happens is that when I launch Acrobat, it asks for licensing information again, or it says it would launch as a trail version... Come on, I'm already paying for the whole package.
Desparely hoping that the Adobe Forum Community is more capable for such support...

I've had numerous chats with Adobe support agents, and with my own IT, and haven't had luck yet. It's been a terrible experience stuck between the two IT support departments as a user I'm the one who's suffering and not these support guys...
The issue here is that my Acrobat is not working as it can't find the internet connection, even though all the other Adobe products in the Creative Cloud work fine.
We use Proxy scrypts in my office, and even though all Adobe links provided to me by Adobe, have been white-listed by my IT, Acrobat still hasn't worked.
I've tried it all, installing, uninstalling, Adobe clean-ups, registery edits, preferential boots etc etc. Still no solution.
Is there no way to manually enter a serial number to get it working???? What if someone loses internet connection, does it mean the Adobe Creative Cloud products are useless in that scenario, even though one has paid for months...
Damn, I'm angry with myself for pushing for Adobe CC upgrade. Sigh.

Satellite A105 Shift Keys stop working after BIOS update

I have a stack of laptop boards from the A105 series (Intel chipset) that I received with bad BIOS's. Two worked, and I updated the BIOS's on them to fix CPU compatibility issues. After that, the shift keys stopped working, and pressing Shift-A causes the power light to dim. Reverting to ANY previous version BIOS, whether through the Windows program, CD, or Crisis Recovery floppy (magic key is "F", not "B", "Esc", or "U"), does not fix the keyboard problem.
To make things more confusing, I did notice that the one single BIOS that seems to actually correct the problem is version 1.50, which I haven't seen available for any Tecra A7 or Satellite A100/A105, except a couple A100's, but the BIOS file is much too small and can't be loaded.
Does anyone have any idea why these Intel-based boards are doing this? Or does anyone know where I can get a usable version 1.50 BIOS?
For the sake of this post, please consider my skill level to be high. (In other words, I would be thankful for people trying to help with "Replace the keyboard", but I have about a dozen keyboards, all of which I have tried, and all of which work on other laptops. Additionally, if you have just a theoretical solution, I'm definitely open to hearing it. Also, if a Toshiba tech would like to reply, I would very much appreciate it!)

Hi, thank you for your help.
Some motherboards were not in chassis when I got them. Is there a place the PSAAxx model number would be written on the boards?
Four PSAA8U (Two A105-S4334 and Two A105-S4014) - Intel Chipset, fingerprint reader. Tried BIOS Versions 1.40, 1.70, 2.00, 5.10, 5.60, 5.90, and 6.00. Shift keys do not work on either one.
Two PSAA2U (A105-S2091 and A105-S2031) - ATi Chipset. BIOS versions 1.50, 1.80, and 2.30. Keyboard works.
Another PSAA8U (A105-S4184) - Intel Chipset, no fingerprint reader. BIOS version 6.00. Keyboard works.
I noticed that so far all of the models with fingerprint readers have the problem. All of the ATi Chipset boards are working fine, but they have significant processor limits. I am in the middle of updating the BIOS in another Intel one using a Crisis Rescue Disc, so after that finishes I will try disconnecting the fingerprint reader to see if it has an effect.
I don't think the keyboard controller is faulty, because these boards all failed on the same day. I have tried updating the BIOS using WinPhlash, Phlash16 in DOS, the install CD, and a Crisis Recovery Disk. I set the defaults in the BIOS almost every time, and I also have tried holding the power button for 60 seconds with the power cord unplugged and the battery removed (as some people have suggested.)
The shift keys don't work in DOS, Linux, Windows, or even in the BIOS. I test it in the BIOS by using Tab to cycle through the fields in time of day, then Shift-Tab to cycle backwards. This works with a USB keyboard, and it also works on the ATi chipset models and the Intel chipset models that are still working.
Thank you for your reply. (-:

Win 7 Drag and Drop stopped working after iTunes update

I really hope that this is the right sub-forum for this.
Here goes:
A few days ago I finally upgraded to 9.1.1.12 and today I was in for a nasty surprise: I can't move MP3s from windows explorer into the iTunes window any more.
I often create playlists and then drag files I get from a few bands I follow directly into those playlists. This is an easy and painless process. My FTP client downloads the files into a prearranged folder whenever they get a new song up, and I then open said folder and drag and drop the file into iTunes.
I just got a new song to listen to today, wanted to drag it in an... Nothing. Just the black, crossed-through circle of "No".
It worked last week. It worked the week before. It worked the years before.
I got Win7 64 in April. It worked on it since then.
It stopped working today.
And no, I won't let iTunes consolidate or organize my media. It only organizes files bought via the iTunes store, nothing I rip from CDs or obtain otherwise, as those files have to be playable by two other players as well. But, again: Until this night it worked without a problem. And after the new update... Stopped.
Is there a new option I'm missing?

I was able to fix it.
I simply stopped running iTunes in Admin mode. For some reason, running it in administrator mode makes it behave "worse" than not doing so.
When I ran it as a normal program, I was able to drag files into it correctly again.
Which is weird, as the last version was also running in admin mode, but worked perfectly.

Bluetooth Mouse stops working after software updates

Hello,
I've been using a Bluetooth mouse with my X220 Tablet for several months now. After fiddling with device manager to ensure that the Thinkpad Bluetooth device does not have the "Allow the computer to turn off this device to save power" setting set, things were working perfectly.
However, after running through some windows & Lenovo updates, the mouse now seems to work for a while, but after any idle time, the mouse stops working. Turning the mouse off & back on seems to cause it to reconnect, and it works until the next time it goes idle for 2 minutes.
I've gone through device manager, and made sure both the Bluetooth & USB Root devices are set not to power down (per http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/Bluetooth-mouse-stops-working-from-time-to-tim... ), but still no luck.
The software updates applied from the Lenovo System Update tool were:
ThinkPad Power Management Driver: 1.67.04.05
ThinkPad Power Manager: 6.64.4
Lenovo Solution Center: 2.4.002
Intel G1/G2 Display Driver: 9.17.10.3347
Also, some windows updates which don't seem related (mostly security), but I can lookup the list of KB numbers if helpful.
Are there any known issues with the power manager updates that might affect this? If so, what's the best way to revert to the last working version?
Thanks!

Try doing a PRAM reset and see if that helps, also put in new batteries as that may make a difference.
OS X Yosemite: Reset your computer’s PRAM

Screen sharing stopped working after last update

Hello all,
I have run software update yesterday, and there were about 10 downloads (I run this weekely, so these must have been new ones). The thing is that after installing all the updates, one of the features that I use more frequently, screen sharing, stopped working properly. I have a Mac Book Pro and an I Mac, both running on Snow Leopard, and screen sharing has always worked just fine, but not after the latest update.
I checked passwords and they are all right, and also checked sharing properties and all seems to be fine. I can share files all right, but for screen sharing now is only possible by setting the option "anyone may request permission to control screen" (under sharing>screen sharing>computer settings) to on, and ask for authorization each time I need to share screens, not good, mainly if you have the computers in different rooms.
Finally, I own an Me account, so I tried sharing screen via Back to my Mac, but it didn't work either.
Can anyone help?
Thanks a lot,
Luis

Problem solved!
After working with Apple, I have an answer. It looks like the 10.10.2 update changed your firewall settings. Try this:
System Preferences>Security and Privacy>Firewall Options
Scroll down the list till you find "screensharingd". If it's marked as block in coming connections, change it to allow incoming connections.
Be sure to reboot your computer and you should be good to go!

Webcam Crystal Eye in Acer 7720, stop work after full update of Arch

hi
i have problem with my webcam in my acer 7720, camera work fin, but week ago i do full update, and after restart, that camer was stop working... Skype deteing) ct camera, because in setting (video setting) i se Acer Crystal Eye /dev/video but its not work... when i try
mplayer -tv driver=v4l2:width=640:height=480:device=/dev/video:fps=30:outfmt=yuy2 tv://
i see just green screen in Mplayer window.
So, how i can check what wrong, where is the problem, maybe i need some driver or something...
Thank

hmmm
I do not remember exactly when it happened, the system updates every day but I noticed that the log, 2 week ago v4l was change and maybe this is the problem of my reason...

HT6065 enhanced dictation stopped working after this update

Similar Messages

Maybe you are looking for