HT6446 My Health Data is showing my total steps for Daily average....

specs:
Using Apple Health App, with the Withings Health Mate and My Fitness Pal as the only 2 sources.
Using an iPhone 5s with 26.7 GB capacity 4.2 GB available
Model Number NE299LL/A
OS Version 8.1 (12B411)
I Updated all my Apps. I have gone into the Health Apps "all Data, and cleared all" this reset my dashboard to 0 steps. then after closing and opening both apps. I am right back to where i started. my "Daily Average" is showing my total steps. (or possibly dividing by 1)

Well, I have just completed a full restore of my iPhone. It was not smooth at first. The restore froze about 10% through and I ended up having to hard reset the phone and start over. The second restore went smoothly but unfortunately, this did not solve anything. All 3 iPhone measuresble components (flights climbed, steps and walking + running distance) still show "No data". I always had the option to enter manual data points, but I never actually tried to as I have no way of determining these 3 things.
I will call Apple support back, but their only option will be to replace the phone. I really don't want to do that, not only because I don't want to have to set up the device for a third time, but I dont want some white box device; I want my brand new, immaculate one. Besides, it's clearly a software issue and likely to happen again with a new device. I guess Apple won't look into this as a software issue until enough people call in about it. That said, please take a few minutes and call Apple about this if you're one of the people affected.
I will report back after speaking with Apple, but as I said, I doubt they're going to have anything other than a device replacement as a solution.

Similar Messages

Showing Sub-Totals only for Specific Column in PowerView

Hi,
Is there a way of showing the sub-totals only for specific columns in a PowerView Matrix?
I am only aware of showing the sub-totals for all or non of the columns.
Thanks and Regards,
Justin

Hi Justin,
According to your description, you want to get sub-totals specific columns within columns group. Right?
In this scenario, we can use IIF() function in expression to achieve your goal. The expression will only return the total value when the column value is a specific value, otherwise we can make it return nothing. Try the following expression:
IIF(Fields!Column.Value="[specific value]",Sum(Fields!Total.Value),nothing)
We have tested this scenario in our local environment. Here are screenshots for your reference:
Reference:
Expression Examples (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Data Form showing wrong total after Planning Refresh

Hi. My end users are having an issue in Planning after a refresh.
Existing projects (budgets) display correct information through data forms. However, when opening a data form to input numbers for a new budget, the data form is populated with the sum of all budgets, instead of showing the expected $0 dollar values.
In an attempt to fix the issue, we've run a few data refreshes through the Planning Desktop. They run without error, but do not fix the problem.
Any suggestions will be greatly appreciated.
We are using planning version 9.2.0.2.

The data form should show exactly what is in essbase so if you query essbase with the Excel Add-in you should see the same number.
Seems like either your data is not what you expect it to be or the form definition is incorrect.
Regards,
-John

My windows volume alias now shows only total drive size, not available?

Recently I wanted to take my FAT32 windows partition and convert it to NTFS. I also wanted to expand the space allocated to that partition. I didn't want to lose certain programs that I had on the windows drive.
Someone on these boards recommended a particular command line that is used to convert the FAT32 to NTFS. Then, from there I could use WinClone to clone the drive, expand it, and then put this image back on.
That all worked fine but now on my Mac desktop, I see the icon/alias for my mac drive and the windows drive. But windows shows only the total allocated hard drive space, not the available space. Is there a way I can have this show available like it used to do?
Thanks.

Clayton Rhoades wrote:
Recently I wanted to take my FAT32 windows partition and convert it to NTFS. I also wanted to expand the space allocated to that partition. I didn't want to lose certain programs that I had on the windows drive.
Someone on these boards recommended a particular command line that is used to convert the FAT32 to NTFS.
I wonder how you did that. AFAIK, this is completely impossible from OS X and can only be done from windows. or do you mean a command line in windows?
Then, from there I could use WinClone to clone the drive, expand it, and then put this image back on.
That all worked fine but now on my Mac desktop, I see the icon/alias for my mac drive and the windows drive. But windows shows only the total allocated hard drive space, not the available space. Is there a way I can have this show available like it used to do?
AFAIK, OS X always showed just total capacity for bootcamp partition formatted NTFS when you view it on the desktop. I don't know why that is but I've never seen it different. just a hunch but maybe if you make the NTFS partition writable by using NTFS-3g or NTFS for Mac by Paragon it will show used space too. I suspect Finder might be reading that info from some metadata it stores on the drive itself.
Thanks.

Health app not showing heart rate data?

The built-in Health app is not showing data from my heart rate monitor (HRM).
I'm using a bluetooth 4.0 HRM (Wahoo Blue HR) on my iPhone 5S (iOS 8.3) The HRM shows as "Connected" in my Bluetooth settings and shows my heart rate within the Digifit and Wahoo Utility apps, so I know the HRM is working correctly. I've enabled Heart Rate Read/Write data for the Digifit and Nike+ Running apps within the Health app.
The heart rate data never shows up in the Health app's Dashboard (or anywhere else in the Health app). Since it doesn't show up in the Dashboard, the data doesn't flow over to the Nike+ Running app, so my heart rate is blank there too. The Digifit app is set to write the heart rate data in the Health app, but that is not happening.
How can I get the Health app to receive my HRM data?

I take it you have already gone into the Health app and set up your Medical ID card, correct?
The Medical ID card will show up on the Lock Screen password entry screen when Emergency option on the bottom left-hand side of the screen is clicked.
It does not show up anywhere if you do not have a passcode lock on the screen.
Cheers,
GB

Expense Report Summary page does not show any totals - only zeros

Hi All,
On creation of Expense Report in the portal When entering a billable expense report, when you get to the summary page is does not show any totals - only zeros for other two schema's its working fine like displaying totals
we are surprised that any custom development is hitting or anything relates with configuration
Provide valuable inputs to proceed further
Regards
Jaipal

Hello vetsrini.
Thanks a lot for your kind reply. As i said, i'm new to this and sometimes i just cannot pass over some problems. Here are the fields i have inserted:
<?for-each:LIST_G_SETUP/AS_OF_DATE?>
<?end for-each?>
<?for-each@section:G_CUST_INV?>
<?for-each:G_1?>
<?INVNUM?>
<?INVOICE_TYPE_INV?>
<?DUE_DATE_INV?>
<?sum (C_INV_BALANCE)?>
<?sum (C_INV_B0)?>
<?sum (C_INV_B1)?>
<?sum (C_INV_B2)?>
<?sum (C_INV_B3)?>
<?sum (C_INV_B4)?>
<?sum (C_INV_B5)?>
<?end-for-each-group?>
<?TOTAL_INV_AMT_DSP?>
<?TOTAL_INV_B0_DSP?>
<?TOTAL_INV_B1_DSP?>
<?TOTAL_INV_B2_DSP?>
<?TOTAL_INV_B3_DSP?>
<?TOTAL_INV_B4_DSP?>
<?TOTAL_INV_B4_DSP?>
<?end for-each:G_CUST_INV?>
In the header of the template i also have <?CUST_NAME_INV?> and the report date. When i try to enter the <?AS_OF_DATE?> it is not printed and also the header is not shown any longer. Once again, thank you for any help,
Octavio

How to create a graph that shows individual totals plus cumulative ones as well?

Hi,
I use Numbers regularly in the most basic way possible but I'd love to create a chart/graph that shows individual totals but can also show cumulative ones.
For example, Tune A was written in 2004 and earnt £5 that year, £7 in 2005, £8 in 2006, £9 in 2007.
Tune B was written in 2006 and earnt £5 in that year, £2 in 2007, £3 in 2008 and £4 in 2009.
Tune C written in 2007 earnt £1 that year, £3 the next year etc.
I want to be able to see how each Tune is earning across the years but also see how much I earnt from all three Tunes in 2007, 2008 etc.
Can any tell me whether it's possible, whether such thing already exists (free or paid for template is fine) or how to in simple terms?
Many thanks.
A.

Setting up one simple data input table and using SUMIFS and COUNTIFS to extract summary data can be easier and more flexible than using long LOOKUP functions with multiple data input tables.   For example, this one Data table can be used to as the source for the other tables, each of which has only one formula which can be copied to other body cells:
In B3 of 'Tune A Earnings by Year', copied down:
      =SUMIFS(Data::$C,Data::$B,$A3,Data::$A,$A$1)
(This table can be cloned for other tunes by copy-pasting it and changing the value in A1 to the relevant tune name.)
In B2 of 'Total Earnings by Year', copied down:
      =SUMIFS(Data::$C,Data::$B,$A2)
In B2 of 'Total Earnings by Tune', copied down:
     =SUMIFS(Data::$C,Data::$A,A2)
In B2 of 'By Tune by Year', copied right to column D and down:
      =SUMIFS(Data::$C,Data::$B,$A2,Data::$A,B$1)
SUMIFS and COUNTIFS work using column-condition pairs. They are not affected by sorting or filtering the data table and update results automatically as new rows are added to the data table.
SG

How to show the total in group footer in group header?

Hello,
I am having difficulties while showing the total of a group footer in the group header. The total in the group footer is correct, but when i am placing the formula in the header it is giving me 0.
I am having 2 formulas to get the total which i placed in the footer:
1.
whileprintingrecords;
numbervar sumpctx := sumpctx + {@Sum OB};
2.
whileprintingrecords;
global numbervar sumpctx;
numbervar DispSales;
DispSales := sumpctx;
sumpctx := 0;
DispSales;
now, I want to add the 2 formula in the header, but it is giving me 0 value, But in the group footer it is showing the correct value.
I tried to do:
Sum ({@Sum OB}) and it is giving that the field can not be summarized.
The group Name is @Entity which is grouped by.
@Entity :
if {Customer.NAME}="NONE" THEN
" OB"
ELSE {Customer.NAME}
Thanks in advance for yopur help.
Regards

Hi,
What i was trying to say there is a hierarchy in report design and records are processed in that way.
Report header/footer - only once
Page header/footer -once in a page
detail -n no of times ,n-no of rows of data
First report header will be processed,then page header n detail,after that report and page footer.
If u insert a group,then the order will be-
report header,page header,group header,detail,group footer,detail,report and page footer.
When u r in group header,all the records are not processed,that results the sum as zero.
But when u create a formula,it calculates the sum first and then u put it there.
I hope this time it will be helpful for u.
Regards,
Misra P.

Date fields are showing as / / in DSO for blank dates or no dates

We are loading flat file data to DSO and the date fields are showing as / / in DSO for blank dates or no dates in the flat file source system. We don't want to see this / / and instead of this, we would want to this field in DSO to be in blank. Please help how to achieve this. Is there any way to do this transformation. If yes, then can you please provide the sample coding.
Advance Thanks,
Christy

I have added the code and data loading is successful. while DSO activation, it is failing. The error message is,
Value '#' of characteristic 0DATE is not a number with 000008 spaces.
It seems that we need to change the code. Can you provide me the corrected code please. Thanks.
Christy

Showing the total in the alv

Hi,
I have an ALV that I have displayed in a view , the ALV contains few columns , I want to show the total of the fields. Please suggest how to do it.

hi
have a look at following [article|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/4063c42a-2549-2c10-fab6-a8c99d98b9b5]
might help you.
regards
manas dua

After upgrading to iOS 8.1 my health data is missing!

I am a diabetic and I was using the health data for tracking my Blood sugar levels in iOS 8.0 . How ever after upgrading to iOS 8.1 all the previous recordings are gone!! Can somebody tell me why this is so?? I am using iPhone 5.

FIRST, back up the phone to iTunes, then sync it. A sync will frequently reduce the size of Other. If that fails, connect the phone to your computer, click on its name in iTunes, and click Restore iPhone. First time, restore your backup. If Other does not get smaller then you will have to restore again and set it up as New, then manually add back your apps and music. You will lose any app data, however. It may help to understand what Other actually is. See: What is "Other" and What Can I Do About It?

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date is created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD

SSRS pulls data from ESSBASE cube, data not showing

Dear Experts,
We are connecting SSRS 2012 to Essbase 11.1.3 to pull data from the cube, and having some issues with some members data not showing in the query designer and report, while some have no problem. And we couldn't find a pattern on which members won't show. We are wondering if this is a known issue and if there is a way to solve the problem.
Thanks very much.
Grace

Hi ,
Check the following:-
1 Check whether you have made the joins properly.
2 Check data at multiprovider level .
3 is data available for reporting in both the cubes
Regards
Rahul

Obiee 11G - Show grand total in chart

I have three measures in my table.
Measure 1 - Rolling balance from the current and previous month.
Measure 2 - PeriodRolling revenue for the last three months including current month
Measure 3 - Calculation using measure 1 and measure 2 and the number of days.
I have created all three measures in the RPD.
The table is by state. So it could be Texas, New York, Illinois and so on.
Month
State
Measure 1
Measure 2
Measure 3
1
Texas
17565
9898989
45
1
New York
97848
8748575
43
2
Texas
85768
8734874
33
2
New york
94855
3234442
23
The chart shows the trend of Measure 3 by time for each state. I need a line on the chart to show the total by month. Do I have to create a sum() formula in the RPD? Appreciate any ideas that you can throw at me.

I created a new group in the selection step and included all the states in it. That seemed to work. The Graph shows a line for grand total. Thank you for your help.
The requirement is to create a line chart. I don't think a bar would work as well here.

TS3579 I found this useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up

I found this (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

HT6446 My Health Data is showing my total steps for Daily average....

Similar Messages

Maybe you are looking for