HTC Imagio Problems (Marketplace, CDMA Mode)

So I have recently changed from a Droid Charge to an HTC Imagio. The change was not ideal, but my Droid Charge was dying slowly and I needed an affordable smartphone.
I like the phone alright. However, every time I try to download new apps, the Marketplace won't open. "There may be a problem with the Marketplace service right now. Check your internet connection and try again later." I have received this message for the past week. I know my internet/data is fine.
I also try to use that handango or whatever for mobile apps... and that always gives me errors.
Final question/complaint... I put my SIM card from my Charge into the Imagio and it tells me that it is not a valid SIM card and to enter a Verizon SIM card. Then it goes into CDMA mode.
How can I get apps? How can I get out of CDMA mode since I am using a Verizon SIM card?
Thanks for all of your help!!!!

The SIM card isn't needed for service on Verizon Wireless. Can you try turning off the phone and removing the SIM card. Then reassemble and boot up to the phone to attempt the activation again.

Similar Messages

What equipment (HTC Imagio) do I need to return with the cell phone?

Hi,
I took a one month global travel program Imagio phone, and now need to return the equipment for credit. However, I can't recall all the pieces that came with it. So far, I have the htc imagio phone unit, along with the following:
one connection wire
one unit (the charger?) with a 2-prong plug built into it
one htc unit (adapter?) also with a 2-prong plug built into it
a teeny-teeny-tiny screwdriver
Does anyone know if I am missing any part? Sorry my memory is so lame. I know, I should have written it down! My bad.
Thanks, VeeMar

Just return the modem and its power cord/power pack. When they provide Ethernet cables, coax, and splitters, those items become yours.

Problem with Append mode in File Receiver

Hello,
I am facing some problem with Append Mode in File Receiver.
In channel config, i have given :
Construction Mode : Append
File Type : Text
Message Protocol : File Content Conversion
The size of the file which i am trying to send is about 9.5MB.
I got this error,
"Recovering from loss of connection to database; message
loaded into queue by recover job: System Job (Failover Recovery)".
So, it would seem that there was a loss of connnection to the database
while the file was being written.
Note - XI successfully recovered from the connection loss and
successfully wrote the file, however since the communication channel
was set to append, it appended to the partial file that was written
before the database connection loss. This is not correct. The file
should have been overwritten after the recovery even though the communication
channel was configured to append.
Can anyone help me on this regard.
Thanks,
Soorya.

Hi Venkat,
I would suggest u to split the file in to chunks if u face any problem in processing at a time in append mode and also
Memory Requirements are must 4 processing huge files:
Q: Which memory requirements does the File Adapter have? Is there a restriction on the maximum file size it can process?
A: The maximum file size that can be processed by the File Adapter depends on a number of factors:
o The most important one is the size of the Java heap, which is shared among all messages processed at a certain point in time. In order to be able to process larger messages without an out of memory error (OOM), it is recommended to increase the size of the available Java heap and/or to reduce the concurrency in the system so that fewer messages are processed in parallel.
o Another factor negatively influencing the maximum message size in releases up to and including XI 3.0 SP 13 is an enabled charcter set (encoding) conversion if the message type is set to "Text".
o Using the transport protocol "File Transfer Protocol (FTP)" also uses more memory for processing than the transport protocol "File System (NFS)" (up to and including XI 3.0 SP 13).
o If the Message Protocol "File Content Conversion" is used in a File Sender channel, consider that not only the size of the input file affects the File Adapter's memory usage, but even more the size of the XML resulting from the conversion, which is usually a few factors larger than the original plain text file.
To reduce the memory consumption in this scenario, consider configuring the setting "Maximum Recordsets per Message" for the sender channel. This will cause the input file to be split into multiple smaller mesages.
Plz do refer the following links:
U may plan the availability of ur communication channel using "Planning Availability Times" feature
http://help.sap.com/saphelp_nw04/helpdata/en/45/06bd029da31122e10000000a11466f/frameset.htm
/people/sravya.talanki2/blog/2005/11/29/night-mare-processing-huge-files-in-sap-xi
hi check the below links for reference
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10748ef7-b2f0-2910-7cb8-c81e7f284af5
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7086f109-aaa7-2a10-0cb5-f69bd2affd2b
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cc1ec146-0a01-0010-90a9-b1df1d2f346f
Regards,
Vinod.

[PXE][IPv6] WdsClient: There was a problem initializing WDS Mode‎

PXE/IPV6 show error after load boot image: WdsClient: There was a problem initializing WDS Mode‎ ; boot via IPV4 is pass and success to insall win8 to clent
1. Server 2012(DHCP+WDS): fail at some times
2. Server2012(DHCP)+Server2008R2(DHCP): fail always
The test environment is pass before, i don't know what happened or any setting is changed.
Hope your help, thanks.

Yeah, same here. Did you ever fix this?

Problem with Fullscreen mode

Hello. I have problem with Fullscreen mode in Pages 09. Let me explain it. I launch Pages 09 on space nr 4, than i activate fullscreen mode and now when fullscreen is active i switch for example to space nr 2. And what happens? Pages also moves to space nr 2, but i don't want to move my pages to space nr 2. I guess it is a bug in Pages 09. Thank you for your advice.

Hi There
By the sounds of this behaviour you haven't set any space options for Pages within System Preferences (Expose and Spaces Pane). After experimenting with different options this is what I experience:
1. Pages not listed in application assignment in spaces Preferences - Enter full screen in pages, switch from one space to another pages window will follow and exit fullscreen (this sounds like what you are experiencing).
2. Pages set to every space in app assignment - Enter full screen in pages, switch from one space to another and pages will follow but wont exit full screen.
3. Pages set to a single space in app assignment - Enter full screen in pages, switch from one space to another using control and arrow keys pages will pull me back into the space it is set to and will exit fullscreen. Using the control and number keys pages will stay in its set space but upon returning to that space pages had exited fullscreen.
I suggest you add pages to the the spaces application assignment in System Preferences by clicking the plus arrow under the list of apps and select a specific space for pages to open in, once open Pages will only move from this space if you move it manually.
You can send your feedback to Apple via http://www.apple.com/feedback/pages.html if you wish
Hope this helps
J.C

Problem with passive mode FTP server and NAT

Hi,
I have a problem with Passive mode FTP and NAT.
I am trying to run both an FTP server and sharing the Internet connection via NAT. I have by the way specified the passive ports to use in ftpaccess (65000-65534). Everything works fine until someone tries to connect via Passive mode. I have tracked the problem down to the firewall and the rule that handles NAT.
Firewall rule config without NAT:
00001 allow udp from any 626 to any dst-port 626
01000 allow ip from any to any via lo0
12300 allow ip from any to any
65535 allow ip from any to any
Firewall rule config with NAT
00001 allow udp from any 626 to any dst-port 626
00010 divert 8668 ip from any to any via en1
01000 allow ip from any to any via lo0
12300 allow ip from any to any
65535 allow ip from any to any
So, passive ports do not work when NAT is on. If I turn it off, Passive ftp works like a charm.
But how do I solve my problem? I have in my quest for the answer stumbled upon "-punch_fw" but do not know how to use it or if it even helps me at all?
Best regards,
Peter
B&W G3 Mac OS X (10.4.5)

Media/Lacrosse-1-tiny.3gp
I can't find the file on your server.
They may also need to edit the .htaccess file to allow the .3gp file extension be used. Call them.

HT2020 if you have internet sharing on imac with Mountain Lion its stil problem with sleep mode ! why ???

if you have internet sharing on imac with Mountain Lion its stil problem with sleep mode ! why ???

Log a bug with Apple, with whatever details you can provide. In the interrim, consider acquiring a router; either a repurposed x86 box running open-source networking or gateway software, or a commercial device.

Device limit problem in offline mode

Hello all :) I've got a problem with Offline Mode since few weeks. I saw that when the phone is rebooted with Offline mode activated, spotify had disconnected the session.
So OK click on "Connection" and he asks for turn off the Offline mode. So OK again, but after no music could be read ! Files are always here cause of XXX GO used but no read possible..
After three tries of reboot and synchronisation of one playlist, it says "you have reached the limit of 3 devices". Into my account i saw 3 times "Android phone" at the same date ! I'm not enough rich to have 3 Android phones :p This bug is happened when i have tried to Sync a third device (other computer). I have deleted all devices into account but it still annoying me. I have deleted files on Android in Application parameters, reboot, try to create an username instead of facebook connection.. I deleted Spotify application on my Android Phone but always nothing changed. I know Application Developpment is not so easy, but if I paid Spotify it's for have no pub and for Offline mode.. So please, I need your help :) No music is not possible, i've began to sing in my shower because there too much silence.. I assure it's so bad for my neighbourhood ;) Thanks you in advance,

Hope, this afternoon when i reboot my Phone.. and crash ! lol
This times got pictures of what i did exactly ! Sorry it's in French ;) Step 1 : After a reboot, i open Spotify and obtain this, I had never seen this before last week ! Usual it connects me at phone's start.. (Android widget of Spotify didn't work too after reboot, i need to open the application directly) Step 2 : i click on "Connection" and he asks me for the desactivation of the Offline Mode => this message appears twice. I need to quit Spotify and restart it to connect successfully. Step 3 : when i look in my "Playlists", the "Dub.Inc" one is not synced whereas before the reboot it was ! And proof in step 4.. Step 4 : when i look in "Parameters" of applications, i see this.. So i do not understand lol :p My playlist is here, in Exceptionnal quality. So as this bug was crazy, i tested on my ipod touch 4 with another version of Spotify. I synced it at the same moment as the Android. You see that after the reboot, playlist is always here ! It's not my account but other thing.. I've got a 64 GO memory card µSD maybe due to that ?! Card is here since one year and no problem detected on it. If someone can help, you'll welcome :)

What is the difference between LTE mode, CDMA mode, LTE/legacy 3GGPP mode, and Global mode in Preferred Network?

What is the difference between LTE mode, CDMA mode, LTE/legacy 3GGPP mode, and Global mode in Preferred Network?

Great question alczervik!
LTE- is our 4G network.
All CDMA/LTE Legacy are going to be related to our 1X, 3G/ EVDO network.
Global is GSM. Meaning you can use Internationally.
I hope this helps.
VanessaS_VZW
Follow us on Twitter @VZWSupport

HTC Rezound problems

Bought HTC Rezound in May--had intrnet connection for 3 hrs yesterday. Should've kept my BlackBerry. Any ideas?

Lemme guess.....4G icon dissapears and no internet.
Yeah many threads here on the "Verizon Support Forum" and no answers except for the standard: "were sorry for your trouble , try running in safde mode and delete all the apps thats not ours" Or some other copy and paste responce.
I'm a little frustrated to. We need to call in to support since this forum is a dead end. Many Many threads on this as being the major problem with the Rezound in the last 2 months and Verizon says nothing.

HTC Flyer problems

My Dad has an HTC Flyer. He can video call me on my laptop but can only voice call my mum on her netbook. Also when we try and call him it immediately hangs up and says he is busy when he is not. Is there a known problem that would cause this, or is there something in his settings he should be adjusting?
Thanks
Andrea

Lemme guess.....4G icon dissapears and no internet.
Yeah many threads here on the "Verizon Support Forum" and no answers except for the standard: "were sorry for your trouble , try running in safde mode and delete all the apps thats not ours" Or some other copy and paste responce.
I'm a little frustrated to. We need to call in to support since this forum is a dead end. Many Many threads on this as being the major problem with the Rezound in the last 2 months and Verizon says nothing.

Problem with "find" mode in adf/swing application

Hi all,
I'm working on ADF Swing application which uses MS SQL Server 2005 (JDeveloper 10g 10.1.3)
I think that my issue might be well-known…sorry if it has been already discussed somewhere else…
I have a problem with the “find” mode for a detail panel in a master-detail form…(To make it clear the “find” mode is switched on when clicking on the special button on a navigation panel).
So this mode works well in a master panel, but it demonstrates strange behavior on a detail panel, i.e. it takes me two attempts to find the necessary child object and it doesn’t switch back in a simple way from this mode to the normal mode….say if we are in the department 10 (Dept is a master form) we can’t simply find KING employee (Emp is a detail form)…is there any workaround for this?
Thanks in advance. Alex.

Hi Frank, please look this issue

Start up problems after sleep mode

Hi,
Half of the time when I put my mid 2010 MacBook Pro in sleep mode by closing the screen it won't restart once I open the screen back again (the screen remains black). This hasn't happened that many times before, but now its becoming more frequent. The only way I can restart my Mac is by holding the on/off button for a few seconds.
Does anyone had similar problems or knows who I could resolve this issue?
I would appreciate any help on the matter
I run:
OS X version 10.9.5
2.4 GHz Intel Core 2 Duo
4 GB 1067 MHz DDR3
mid 2010 MacBook Pro 13-inch

Step 1
Take all the applicable steps in this support article. That's the starting point for any further efforts to solve the problem. Please read the whole article carefully (some of it is hidden by disclosure triangles) and don't skip any of the steps, including the ones under the heading "Additional troubleshooting." If you don't understand any of the steps, ask for guidance.
Step 2
If you're running OS X 10.8.5 or earlier, from the menu bar select
           ▹ System Preferences... ▹ Accessibility
If the checkbox at the bottom marked
          Enable access for assistive devices
is checked, uncheck it and test.
If you're running OS X 10.9 or later, select
           ▹ System Preferences... ▹ Security & Privacy ▹ Privacy ▹ Accessibility
If any applications are listed on the right and have a checked box next to them, uncheck all the boxes and test. You may first have to click the padlock icon in the lower left corner of the window and authenticate as an administrator to unlock the settings.
Step 3
In the Energy Saver pane of System Preferences, uncheck the box marked
          Put hard disks to sleep when possible
Step 4
This and the next step must be taken as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that heading, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You may see one or more reports with a name that begins with "Sleep Wake Failure" followed by a date. Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
Step 5
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ Diagnostic and Usage Messages
In the search box in the window's toolbar, enter "powerd" (without the quotes.)
You may see one or more lines like this:
com.apple.message.signature: Platform Failure
If you do see that, and you did everything in the preceeding steps, then you're dealing with an internal hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

'Ñ' Problem in Character Mode Report

i made a report in Character Mode, using PRT.
The problem is, when i generate report directly to the Dot Matrix Printer it didn't print the 'Ñ' character in my output, a corresponding ASCII character is printed instead. What could be the problem in my report or is it the printer???
PLEASE HELP ME!!! I NEED YOUR FEEDBACK, THANKS IN ADVANCE!

Hi..
If you are directly giving Print from previewer..you need to set printer to 10 cpi (if you want bigger font) and 12 dpi to compress the larger font..
CPI is character per inch so in one inch 10 chr or 12 chr can fir acc to setting.
If you are uploading file on Oracle Apps then you need to set fonts if needed in concurrent manager,printer setting,Style,fonts ..
"But the hardware setting is vewry imp..set the font in DRAFT mode"..
tarak desai
[email protected]

Problem in Character Mode Report (Urgent)

Dear All
i m designing a character mode report
and when i preview it ,,, it will display
different report font which is big in size
and width so it is not fit in the designed columns
can any one help me ,, y this problem is exist
though i m using Dot matrix printer EPSON DFX-8500
printer.

Hi..
If you are directly giving Print from previewer..you need to set printer to 10 cpi (if you want bigger font) and 12 dpi to compress the larger font..
CPI is character per inch so in one inch 10 chr or 12 chr can fir acc to setting.
If you are uploading file on Oracle Apps then you need to set fonts if needed in concurrent manager,printer setting,Style,fonts ..
"But the hardware setting is vewry imp..set the font in DRAFT mode"..
tarak desai
[email protected]

HTC Imagio Problems (Marketplace, CDMA Mode)

Similar Messages

Maybe you are looking for