HTML 5 output not working at all (just a loading gif)
Hi there I have had a problem with the HTML5 output,
Basically it doesn't work at all, all I get is a continuous loading giff that goes on for hours.
I have tried pretty much every combination of settings, including non-scalable HTML5 output, lower quality and preloader at 1%.
What is strange is that this is a new problem, everything was working fine on the first draft. All I have added since the is more images and a few more advanced actions.
I ran the HTML5 tracker and there was nothing there.....
Any help would be appreciated.
Thank you in advanced
Follow the process of elimination explained in this post to debug:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
Basically you just need to take a backup copy of your project file and then hide large groups of slides before republishing and testing. If you hide first one half of the slides and then publish, and then the other half and publish, you should be able to see if this issue is being caused by something on the slides somewhere. If hiding slides does not resolve the issue at all, start deleting out any Advanced Actions to see if they may be gumming up the works. Eventually you should be able to get back to some situation where it doesn't stall like this. Then work back to find out what caused it.
Similar Messages
-
Updated to new version 3.6.6 now browswer doesn't work. Just gives me a untitled tab. Bookmarks nor google button work either.
== This happened ==
Every time Firefox opened
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; StarBand Version 4.0.0.2; SearchToolbar 1.1; .NET CLR 2.0.50727; StarBand Version 4.0.0.2; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; StarBand Version 4.0.0.2)On my previous post I said:
"When upgraded to FF 3.6.6, due to Norton 360 v.4, everything froze.
My solution was to downgrade to FF 3.6.4, because with that version i had no problems, and now again everything works fine.
Not the best solution but it is better than downgrading to FF 3.5.x as I saw many users did."
Now I want to add that, after running FF 3.6.4 for 3 days, i got again the security warning to upgrade to FF 3.6.6, so I did.
Now am running FF 3.6.6, and even with Norton, everything works fine, no bugging, freezing, refreshing, blank pages...
I can't figure out why the problem still persist for other users. Now maybe it is not due to Norton any more? -
Flash player file working in HTML but same HTML code is not working in JDEV
Hello,
I have a flash player file which is working just fine in a plain HTML. But not working at all in Jdeveloper's .jspx file. I have no idea what is the issue. Please help.
Below is the code snippet. There is no way I can format the code snippet for more visual clarity in this editor. So I have to live with all minified code when it displays on the posting. Sorry :(.
Thanks, Ruchir
<html version="-//W3C//DTD HTML 4.01 Transitional//EN">
<link href="css/jdeveloper.css" rel="stylesheet" media="screen"/>
<link href="css/oracle.css" rel="stylesheet" media="screen"/>
<body bgcolor="Black">
<br> </br>
<table align="left">
<tr>
<td>
<object classid="CLSID:D27CDB6E-AE6D-11cf-96B8-444553540000"
codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,22,0" ID="IncrediFlash" Width="560" Height="270">
<param name="movie" value="cxs.swf?317338960"/>
<param name="bgcolor" value="#000000"/>
<!--<embed name="IncrediFlash" src="cxs.swf?317338960" bgcolor="#000000" width="560" height="270" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer">-->
</object>
</td>
</tr>
</table>
</body>
</html>Don't have an answer for you, but you can put tags around your code so it's more readable... just use left-bracket code right-bracket and left-bracket code slash right-bracket around your code like this:
<html version="-//W3C//DTD HTML 4.01 Transitional//EN">
<link href="css/jdeveloper.css" rel="stylesheet" media="screen"/>
<link href="css/oracle.css" rel="stylesheet" media="screen"/>
<body bgcolor="Black">
<table align="left"> <tr> <td>
<object classid="CLSID:D27CDB6E-AE6D-11cf-96B8-444553540000"
codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,22,0"
ID="IncrediFlash"
Width="560" Height="270">
<param name="movie" value="cxs.swf?317338960"/>
<param name="bgcolor" value="#000000"/>
<!--<embed name="IncrediFlash"
src="cxs.swf?317338960"
bgcolor="#000000"
width="560" height="270" type="application/x-shockwave-flash"
pluginspage="http://www.macromedia.com/go/getflashplayer">-->
</object> </td> </tr>
</table>
</body>
</html>John -
My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?
I know how to use about:config & have had the usual problems with newtab page tiles but this is more like a bug- using 33.0.1. Doesn't show tiles icon in top right corner just shows a gear that is used to hide the empty tiles that I can't fill with sites. First it would only show 2 rows of 4 columns even though I had it set to 5 & 6 then few days later for no reason they went empty with a serrated line around the tiles & can't drag from the bookmarks---- really bloody annoying!!!!!!! Possibly a setting in the about:config but i can't fig it out?Reset Firefox to its default state
If you're having major problems which you can't resolve, start fresh with only your essential information.
Troubleshooting Information
This page contains technical information that might be useful when you're trying to solve a problem. If you are looking for answers to common questions about Firefox, check out our support website.
Application Basics
Name Firefox
Version 33.0.1
Update History
User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0
Profile Folder
Enabled Plugins about:plugins
Build Configuration about:buildconfig
Memory Use about:memory
Multiprocess Windows 0/1
Crash Reports for the Last 3 Days
Report ID Submitted
All Crash Reports
Extensions
Name Version Enabled ID
Adblock Plus 2.6.5 true {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
Adblock Plus Pop-up Addon 0.9.2 true [email protected]
Skype Click to Call 7.3.16540.9015 true {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
Trend Micro BEP Firefox Extension 8.0.0.1173 true [email protected]
Trend Micro NSC Firefox Extension 6.8.0.1120 true {22C7F6C6-8D67-4534-92B5-529A0EC09405}
Trend Micro Toolbar 7.0.0.1243 true {22181a4d-af90-4ca3-a569-faed9118d6bc}
Graphics
Adapter Description Intel(R) HD Graphics
Adapter Drivers igdumd64 igd10umd64 igdumdx32 igd10umd32
Adapter RAM Unknown
Device ID 0x0046
Direct2D Enabled true
DirectWrite Enabled true (6.2.9200.16571)
Driver Date 1-30-2013
Driver Version 8.15.10.2993
GPU #2 Active false
GPU Accelerated Windows 1/1 Direct3D 11 (OMTC)
Vendor ID 0x8086
WebGL Renderer Google Inc. -- ANGLE (Intel(R) HD Graphics Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote true
AzureCanvasBackend direct2d
AzureContentBackend direct2d
AzureFallbackCanvasBackend cairo
AzureSkiaAccelerated 0
Important Modified Preferences
Name Value accessibility.blockautorefresh true
accessibility.typeaheadfind.flashBar 0
browser.cache.disk.capacity 358400
browser.cache.disk.smart_size_cached_value 358400
browser.cache.disk.smart_size.first_run false
browser.cache.disk.smart_size.use_old_max false
browser.cache.frecency_experiment 1
browser.places.smartBookmarksVersion 7
browser.sessionstore.upgradeBackup.latestBuildID 20141023194920
browser.startup.homepage www.google.com
browser.startup.homepage_override.buildID 20141023194920
browser.startup.homepage_override.mstone 33.0.1
browser.tabs.loadInBackground false
dom.mozApps.used true
extensions.lastAppVersion 33.0.1
font.internaluseonly.changed true
gfx.direct3d.last_used_feature_level_idx 1
keyword.URL http://www.bing.com/search?FORM=UP97DF&PC=UP97&q=
media.gmp-gmpopenh264.lastUpdate 1413750166
media.gmp-gmpopenh264.version 1.1
media.gmp-manager.lastCheck 1414375733
network.cookie.prefsMigrated true
places.database.lastMaintenance 1414404204
places.history.expiration.transient_current_max_pages 102059
plugin.disable_full_page_plugin_for_types application/pdf
plugin.importedState true
plugin.state.npmedia 0
plugin.state.nptimegrid 1
print.printer_Canon_MG2100_series_Printer.print_bgcolor false
print.printer_Canon_MG2100_series_Printer.print_bgimages false
print.printer_Canon_MG2100_series_Printer.print_colorspace
print.printer_Canon_MG2100_series_Printer.print_command
print.printer_Canon_MG2100_series_Printer.print_downloadfonts false
print.printer_Canon_MG2100_series_Printer.print_duplex 3997817
print.printer_Canon_MG2100_series_Printer.print_edge_bottom 0
print.printer_Canon_MG2100_series_Printer.print_edge_left 0
print.printer_Canon_MG2100_series_Printer.print_edge_right 0
print.printer_Canon_MG2100_series_Printer.print_edge_top 0
print.printer_Canon_MG2100_series_Printer.print_evenpages true
print.printer_Canon_MG2100_series_Printer.print_footercenter
print.printer_Canon_MG2100_series_Printer.print_footerleft &PT
print.printer_Canon_MG2100_series_Printer.print_footerright &D
print.printer_Canon_MG2100_series_Printer.print_headercenter
print.printer_Canon_MG2100_series_Printer.print_headerleft &T
print.printer_Canon_MG2100_series_Printer.print_headerright &U
print.printer_Canon_MG2100_series_Printer.print_in_color true
print.printer_Canon_MG2100_series_Printer.print_margin_bottom 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_left 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_right 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_top 0.5
print.printer_Canon_MG2100_series_Printer.print_oddpages true
print.printer_Canon_MG2100_series_Printer.print_orientation 0
print.printer_Canon_MG2100_series_Printer.print_page_delay 50
print.printer_Canon_MG2100_series_Printer.print_paper_data 1
print.printer_Canon_MG2100_series_Printer.print_paper_height 11.00
print.printer_Canon_MG2100_series_Printer.print_paper_name
print.printer_Canon_MG2100_series_Printer.print_paper_size_type 0
print.printer_Canon_MG2100_series_Printer.print_paper_size_unit 0
print.printer_Canon_MG2100_series_Printer.print_paper_width 8.50
print.printer_Canon_MG2100_series_Printer.print_plex_name
print.printer_Canon_MG2100_series_Printer.print_resolution 7602290
print.printer_Canon_MG2100_series_Printer.print_resolution_name
print.printer_Canon_MG2100_series_Printer.print_reversed false
print.printer_Canon_MG2100_series_Printer.print_scaling 1.00
print.printer_Canon_MG2100_series_Printer.print_shrink_to_fit true
print.printer_Canon_MG2100_series_Printer.print_to_file false
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_bottom 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_left 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_right 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_top 0
privacy.sanitize.migrateFx3Prefs true
privacy.sanitize.timeSpan 2
storage.vacuum.last.index 1
storage.vacuum.last.places.sqlite 1412311800
Important Locked Preferences
Name Value
JavaScript
Incremental GC true
Accessibility
Activated false
Prevent Accessibility 0
Library Versions
Expected minimum version Version in use
NSPR 4.10.7 4.10.7
NSS 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSSMIME 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSSSL 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSUTIL 3.17.1 3.17.1
Experimental Features
Name ID Description Active End Date Homepage -
I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawal or what!! Lol
Hi there,
Firstly, try a hard reset. Hold the sleep/wake and home buttons together until the Apple logo appears.
If this doesn't work, try restoring your device. Put it in recovery mode if iTunes doesn't recognise it, and restore it from there. I have linked to instructions below.
Recovery Mode and Restore - Apple
Let me know if this helps,
Nathan -
I was trying to do an update on my Ipad2 and it looked like it was getting ready to load, but then I received an error message. Now my ipad is not working at all. The only thing that appears on the screen is the apple logo and a loading bar. I tried to turn it off, but it just wont do anything. Help!
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
my ipod classic got wet back in August.. it seemed to work fine for about a month, but recently is not working at all..screen appeared to get cloudy and then it just stopped working. thanks.
Most likely, water damage.
You can try putting your iPod in a tupperware, half filled (maybe half inch) with rice grains, close the cover for about a week.
If you have done this, as soon as it got wet, higher chances of success, now looks like the water moisture is getting to the LCD screen.
Then you can always bring it to Apple Genius bar, for a an overhaul. (may cost you half the price of a new iPod classic.) -
Just downloaded Firefox 4 on Windows Vista 32-bit and its not working at all.
So I just downloaded Firefox 4 on Windows Vista 32-bit, and it's not working at all. I open up Firefox and there is not tab bar, and all the command buttons are repeated 3 times, and are on 3 different bars. This only happens with Firefox 4 and not Firefox 3.6.10. Also, when I go the menu bar and I try to click soething, nothing happens. I'm not sure why this is going on. Help anyone? Here is a link to a screenshot of my browser.
http://img683.imageshack.us/i/firefox4y.jpg/I have this too, but doesn't even startup now? I downgraded to the previous version and all is OK. I also have a 64 bit version of Vista and it seems to work "a-OK" on that machine.
Seems to me to be 32-bit issue.
Editing this post:
I just seen a possible answer...Do you have roboform installed (in the taskbar also)? If so, try disabling it or removing it and try to start again. I said above that I have 2 units and on the one (32-bit) I have Roboform installed and it crashes, but on the other one I don't...so go figure.
According to the report I read, if you upgrade Roboform it should be OK, although I have not tested as of yet...I am still at work...
Hope that helps... -
HT3180 I just updated my Apple TV 2 and now it is flashing and not working at all. Help
I just updated my Apple TV 2 and now it is flashing and not working at all. Help
I just did the update to version 5.2 on our ATV2 and now I'm having the exact same problem as the OP- all attempts to access any iTunes services i.e. Movies or TV result in dropping back to the ATV Main menu. Per Winston's suggestion, I logged out of iTunes and then tried to log back in. I am getting a message "the server is not responding- please try again later".
FWIW- all my non-iTunes services on the ATV are working fine- i.e. Netflix and YouTube.
Sounds like the update has overwhelmed the Apple servers.
Dave -
I have just updated my iPhone to version 5.1. After the update, the camera button next to the "slide to unlock" button does not work at all. It used to function well before the update. It happens to my friends as well. What should I do? Can someone help?? Thanks!!!!
Slide the camera button up
-
I've just edited all my apple id information and my iMessage will not work at all, can anyone help?
Try tapping Settings > FaceTime, turning FaceTime Off, editing the Apple ID associated with FaceTime, and then turning it back on.
If that doesn't do it, take a look at this Apple doc -> iOS: Troubleshooting FaceTime and iMessage activation -
Oil got into my ipod and now it will not work at all is it worth fixing or should i just replace it with a new one ?
Replace it.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
i updated my ipad 3 to latest version of system upgrade and now it is not working. All black screen with Itunes logo. I tried restarting
Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
$19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard. -
Shockwave flash plugin not working at all!! HELP
So, here is my problem, I have windows 8.1 64bit and running the latest mozilla firefox.
I've had a lot of problems with flash player (32bit), videos not working properly, loading very slow.. (i have fast internet, working good) then i updated flash and it totally stoped working.
Resetting Firefox does not work for me. Flash player is not working at all, so i had to uninstall it. i uninstalled both flash player and shockwave player. i tried having only flash player - still not working.
I've already tried these too:
-Uninstalling and re-installing flash player
-Uninstalling and re-installing in Safe Mode
-Turning off hardware acceleration in both Firefox and flash player
-i have updated all drivers on my computer
Still not working at all! WHY?This add-on will prevent Flash from running on the web page until you want.
'''[https://addons.mozilla.org/en-US/firefox/addon/flashblock/ Flash block]''' {web link}
Never be annoyed by a Flash animation again! Blocks Flash so it
won't get in your way, but if you want to see it, just click on it
If you have problems with current Shockwave Flash plugin versions then check this:
* see if there are updates for your graphics drive drivers
'''https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration'''
* disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
'''https://forums.adobe.com/message/4468493#TemporaryWorkaround'''
* disable hardware acceleration in the Flash plugin
'''https://forums.adobe.com/thread/891337'''
See also:
* '''http://kb.mozillazine.org/Flash#Troubleshooting'''
Notice, Adobe just updated the Flash Player '''v16.0.0.257 https://www.adobe.com/products/flashplayer/distribution3.html''' -
Image map links not working in all browsers
Hi, I develop HTML marketing emails once a week and my boss
has recently informed me that some, not all, of the image mapping
links do not work in all browsers or emails i.e. MacMail, Opera,
Safari, etc. He's positive there's something in Dreamweaver that
makes the links universally accommodated no matter what email/web
browser you use, but I haven't been able to find a solution as of
yet.
Any help on this would be appreciated, thanks!
:music;Let's start with the least critical issue. Your boss and his
boss are
simply wrong. An HTML link is just an HTML link, whether
created in DW or
in Notepad.
Now, on to the meat. When you upload this page to the web, do
the links
work? And when you say that they don't work, what do you
mean? Do you mean
that when you click on them, you are not taken to the linked
page? Which
links are not working?
Finally, why do you have your mapped image also within an
anchor tag?
<a href="
http://www.beyondthewall.com/xcart/giftcert.php"><img
src="Slice.jpg" width="263" height="58" border="0"
usemap="#Map" /></a>
Is that the one where the link doesn't work?
Can you post a link to this page on the web, please?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"blaise napolitan" <[email protected]> wrote
in message
news:[email protected]...
> Thanks for the reply, and that's what I would have
figured but in this
> case the
> entire thing is an image map so there's no absolutely
positioned elements
> that
> would overlay the links. It's just a simple table with
the main picture
> mapped
> out with a few links. I'm assuming it either has to do
a) the image not
> being
> displayed correctly due to a built in email security
feature or b) my boss
> and
> his boss are mistaken (which wouldn't surprise me). I'll
post the code
> just in
> case, thanks for all the help.
>
>
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
> <title>Untitled Document</title>
> <style type="text/css">
> <!--
> .style42 {
> color: #000000;
> font-weight: bold;
> }
> .style29 {
> color: #FFFFFF;
> font-family: Verdana, Arial, Helvetica, sans-serif;
> font-size: 18px;
> font-weight: bold;
> }
> -->
> </style>
> </head>
>
> <body>
> <table width="767" border="0" align="center"
cellpadding="0"
> cellspacing="0">
> <tr>
> <td><a
> href="
http://www.beyondthewall.com/xcart/beyond_the_wall_posters_prints.html"><i
> mg src="Logo.jpg" width="288" height="58" border="0"
/></a><a
> href="
http://www.beyondthewall.com/xcart/giftcert.php"><img
> src="Slice.jpg"
> width="263" height="58" border="0" usemap="#Map"
/></a><a
> href="
http://www.beyondthewall.com/xcart/beyond_the_wall_posters_prints.html"><i
> mg src="pay.jpg" width="216" height="58" border="0"
/></a></td>
> </tr>
> <tr>
> <td><img src="main.jpg" alt="main" name="main"
width="767"
> height="513"
> border="0" usemap="#mainMap" id="main" /></td>
> </tr>
> <tr>
> <td bgcolor="#FFFFFF"><div
align="center"><a
> href="mailto:[email protected]"
class="style42"
> style="text-decoration:none" border="1">*To
Unsubscribe Click
> Here*</a></div></td>
> </tr>
> <tr>
> <td bgcolor="#7e0997"><div
align="center"><a
> href="
http://www.beyondthewall.com/xcart/beyond_the_wall_posters_prints.html"
> class="style29"
>
style="text-decoration:none">www.beyondthewall.com</a></div></td>
> </tr>
> </table>
>
> <map name="Map" id="Map"><area shape="rect"
coords="78,33,79,34" href="#"
> /></map>
>
> <map name="mainMap" id="mainMap">
> <area shape="poly"
>
coords="10,7,376,16,369,227,211,218,177,92,122,85,12,109,13,118"
> href="
http://www.beyondthewall.com/xcart/posters_prints_novelty_sex.html"
> />
> <area shape="poly"
coords="13,117,121,90,174,99,216,270,9,294"
> href="
http://www.beyondthewall.com/xcart/six-pack-24x36.html"
/>
> <area shape="poly"
coords="219,225,393,251,347,469,174,407"
> href="
http://www.beyondthewall.com/xcart/david-beckham-arm-st4514-24x36.html"
> />
> <area shape="poly"
coords="226,489,14,496,13,303,199,283,168,410"
> href="
http://www.beyondthewall.com/xcart/tension.html"
/>
> <area shape="poly"
coords="394,16,674,16,668,241,387,238"
> href="
http://www.beyondthewall.com/xcart/colin-egglesfield-24x36.html"
/>
> <area shape="poly"
coords="407,251,665,254,661,501,403,492"
> href="
http://www.beyondthewall.com/xcart/daniel-24x36.html"
/>
> <area shape="rect" coords="681,15,761,508"
> href="
http://www.beyondthewall.com/xcart/beyond_the_wall_posters_prints.html"
> />
> </map></body>
> </html>
>
>
Maybe you are looking for
-
I was having trouble with my network/internet connection and made a big mistake. On the settings page I said "forget this network" and thought I could rejoin my network after entering security info, etc. No such luck. Can I recover my network sett
-
LOGO image not appearing in infoview
Hi, I am using web inteligence for my BO report creation. I have saved my logo in the image folder (C:\Program Files\Business Objects\BusinessObjects Enterprise 12\Images). I have used the logo in my WEBI report by using BOIMG:// and it is appearing
-
Dear All, I developed an scat, when i choose flat file and start executed, instead of taking the values from flat file, my recording only getting executed again and again, where could be the error... Regards, Suresh Patipati.
-
Can we add customer logo in performance document printable page in Fusion Performance management Release 9
-
I am having trouble talking to Watlow EZ-Zone PM controllers with labview. I cannot get the ENET to RS-485 to show up in Max. I discovered that this is due to 64 bit windows? However I can talk to the ENET to RS-485 using VISA Resource Name: ASRL::xx