HTML Article with YouTube iframe gets an error

I am coding the articles in the folio using HTML and CSS. When I upload the article to the folio producer I receive an error that the article is "Missing or unable to load layout." When I try and download the folio using the Adobe Viewer app I receive an error that I am unauthorized to view the folio. By deleting each element and re-uploading I was able to discern that this was the offending code:
<iframe class="no-print movie-frame" src="http://www.youtube.com/embed/xSKoL9DZj_k" frameborder="0"></iframe>
I have styled it according to other discussions, and I have used same code for other videos but only when I have completed the article within InDesign. The classes resize the element based on the viewport size and hides the element when printing, I have removed the classes and still receive the error.

On a whim, the next action I tried worked.
I used the code straight from YouTubes embed tab, which removes the http: from the src.
<iframe class="interactive movie-frame" src="//www.youtube.com/embed/xSKoL9DZj_k" frameborder="0"></iframe>

Similar Messages

When I sync my iPhone with iTunes I get an error message that says "iTunes could not sync calendars to the iPhone because the sync server failed to sync the iPhone"

When I sync my iPhone with iTunes I get an error message that says "iTunes could not sync calendars to the iPhone because the sync server failed to sync the iPhone" How do I fix this?

I had the same problem. I found this site http://itprokb.blogspot.com/2010/10/itunes-could-not-sync-calendars-to.html
It worked for me. Good luck!

HT1338 when i try and upgrade my macbook pro with retina i get an error message that is not compatible

when i try and upgrade the OS on my new macbook with retina i get an error message that it is not compatable

Hello, i have the same problem i have my brand new MacBook Pro retina display with mountain lion, but i can´t upgrade any app or installing from App Store, because all that app are compatible with 10.8.2 and not with 10.8.1 i ´ve been downloaded the upgrade from this link http://support.apple.com/kb/DL1581?viewlocale=es_ES, and i try to install it and they said that my Hard Disk is not compatible with this software. ***!!!! is the last new machine and i can´t upgrade!!!! please i need a solution, or a link whatever. i tried to re-install the mountain lion and is the same problem, today at the afternoon i will try with my time machine hard drive to see what happened beacuse in my ex macbook air 2012 i have the last O.S.

TS4268 I am able to imessage from my ipad all phone numbers in contacts but one. With it a get an error message that say "number is not registered with imessage". However I am able to imessage that number from my iphone. Any suggestions?

I am able to imessage from my ipad all phone numbers in contacts but one. With it I get an error message that says "number is not registered with imessage". However, I am able to imessage that number from my iphone. Any suggestion?

Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David

Whenever I try to sync my iPod Touch 5th gen with iTunes I get an error message saying "The iPod "*****" could not be synced because the sync session failed to start". Is there any way I can fix this?

Whenever I try to sync my iPod Touch 5th gen with iTunes I get an error message saying "The iPod "*****" could not be synced because the sync session failed to start". Is there any way I can fix this?

B-rock, thanks for posting the above. I actually have the same issue, running Windows XP and I don't have that backup location, \Application Data\Apple Computer\MobileSync\Backup\. When I go to Documents and Settings\(username)\ there's a AppData folder followed by:\LocalLow\DataMngr\ .
I have the latest update, 5.0.1 and I have the iPod Touch 3rd gen.
I have tried removing itunes and all that is associated with it then reinstalling and keep getting the same message. I've reset my ipod thinking that would help but still, no backup.
In iTunes, Edit, Preference, Device there are no backups.
What am I doing wrong, can you help?
Thank you!

I have Os Lion on my mac book pro, im not a fan of this because i cant run many games, i have the disk for snow leopard my machine came with but i get a error saying "unable to unmount disc" when i try erase my hard drive i just want OS SL back any help?

I have Os Lion on my mac book pro, im not a fan of this because i cant run many games, i have the disk for snow leopard my machine came with but i get a error saying "unable to unmount disc" when i try erase my hard drive i just want OS SL back any help?
many thanks Carl.

You must boot from another drive in order to erase the system drive.
Try starting up with Snow Leopard DVD inserted and C depress. That should get you booted from the DVD. Then start Disk Utitlity from DVD and erase the disk then you should be able to install Snow Leopard.
Remember that everything will be removed from the disk when you erase it and install Snow Leopard so backup first.
Allan

Whenever I try to view a video on youtube, I get "An error occurred. Please try again later."

I am using the latest version of Firefox (4.0.1) and Shockwave Flash plugin (10.3.181.14) on a Windows Vista machine. Whenever I try to view a video on youtube, I get "An error occurred. Please try again later." If I restart in safe mode, everything works fine. I figure that the problem stems from a extension incompatibility, but cannot figure out which one. I haven't installed a new plugin recently.

Do you have an example of such a video?
If you went to m.youtube.com did you switch to "Desktop" mode at some point? If so, switch back to "Mobile version" (at bottom of page).

Edge crashes when used with Youtube iframe API - how to solve this?

As Edge is the thing which makes mobile interaction design possible, it would be necessary to use the youtube iframe api for youtube videos (the usual Youtube JS API operates with flash and therefore is no go for mobile useage).
As soon as i integrate the iframe API Code in any manner into a Document that runs Edge (paralell or within Edge), Adobe Edge crashes.
Anyone there with experience in this?
Thanks so much,
Andy

Hi Hemath,
here the project:
http://www.jungeroemer.net/projekte/ytapi/edge.zip
i used the yutube api as here:
https://developers.google.com/youtube/iframe_api_reference?hl=nl#Getting_Started
for now edge does only crash if i use the youtube code in the html file<script> tag when having an edge file running in the same html.
When i paste the code into edge it keeps running but it seems like onYouTubeIframeAPIReady() is never being called because
the code can not proppelry be loaded into the website within Edge Animate..
If loaded successfully i would try to identify the player div for the youtube api and try to place the player iframe in an edge div.
Thanks for help,
regards,
Andy

As soon as I login with iChat, I get an error from MobileMe!

Hey, I've had this issue for a while, and my work around for it was just not using iChat. However, I want to use iChat now so I need a proper resolution. Now I have mobile me with my [email protected] address, and I have my iChat account with [email protected] (created before my MM subscription).
When I log into iChat for the first time, within minutes I get an error from MobileMe saying "You've entered an incorrect password for MobileMe, please try again"... I didn't do anything though.
If I go to MobileMe in System Preferences, it says: "Your password has changed. Enter your new password.
If you have not changed (or reset) your password contact MobileMe support."
If I enter my password in and get that fixed, the next time I start up iChat it says: "Your login ID or password is incorrect"... soo I'm confused.
The password for my @me and @mac addresses are different, is it possible they are sharing the same keychain? I do have the check box ticked to remember the password.
Any idea's?

Hi,
I would not repair at this time.
In the list of password you should find the one for iChat Or possibly several for iChat if you have different Account/Screen Names list by their Account names.
Double click on the one that is causing you issue.
In the new window that pops up put a tick in the Password Box. You will probably have to confirm with your Admin Password to Allow Once.
Does this show the right password ?
If not change the Password.
If it does then click the Access Tab and see if iChat is Allowed (Or Allow All is being used)
Either change to Allow All or add iChat to the List.
7:45 PM Saturday; April 3, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Scrubber Thumbnails for HTML Articles - How Do You Get them to Actually Appear?!?!?

Hi Gang,
My apologies if I asked this last month, but it's really driving me nuts.
The cover of our magazine is an HTML article, and it appears as a blank screen in both the TOC and BROWSE modes. The former is easy to fix by simply creating a thumb image and inserting it via Indesign or the Folio Producer. It's the browse mode that is the conundrum. I've followed the following instructions provided by ADOBE and updated my HTML article but to no avail.
Creating scrubber thumbnails for HTML articles
For InDesign articles, the viewer automatically generates the thumbnails that appear when you drag the scrubber. However, generating thumbnails for HTML articles takes more time, sometimes resulting in poorly rendered thumbnails. To improve thumbnail performance in HTML articles, you can manually add image files to the HTML article folders.
Create png files that are named "scrubberthumbnail_h.png" and "scrubberthumbnail_v.png" (you can also use _l and _p suffixes). Add these files to the HTML article folder. There is no size restriction for these images, but note that they are scaled down proportionally to a height of 166 pixels. As a point of reference, when thumbnails are generated, landscape thumbnails are 221x166 pixels, and portrait thumbnails are 125x166 pixels.
What am I doing wrong? My folio is portrait (vertical)-only and I put my .png filed named "scrubberthumbnail_v.png" in the parent directory (same level as the "cover_v.html" file targetted) of the HTML article. Should it be put somehwere else in the article folder?
I'm hoping there is a simply solution.
Thanks in advance!

Thanks guys, but that doesn't address my problem. It's an HTML article, not a web content overlay.
Yes, I know I could redo the cover within InDesign using a web content overlay spanning the entire 'page' and use a MSO as pointed out, but the cover starts off empty and then items begin to appear (ie) image and then the magazine title followed by the article titles. The latter which are linked (navto:) to their respective article. The problem is that navto links do NOT work in web content overlays, which is why I resorted to creating an HTML article. But alas, the scrubber thumbnail problem...
The instructions above do not work for me, unless I've done something wrong such as placing the thumb image in the wrong location within my HTML folder, which in this case is a published EDGE ANIMATE project.
And yes I could still go the MSO/InDesign web content overlay route and insert invisible frames over my link text as delayed MSOs, but that seems unecessary since I should be able to create the scrubber thumbnail for an HTML article as explained above.
Any advice regarding the creation of the scrubber thumbnail? Or does it simply not function as intended at this time? I'm using InDesign CS5.5 using v.26 tools.
Thanks in advance!

No matter what I do with pacman, I get Server error

error: directive 'Server' with a value not recognized
error: config file /etc/pacman.d/mirrorlist, line 274: problem in options section
error: failed retrieving file
Comment off line 274 in the mirrorlist and the next uncommented line is the problem, no matter what I'm trying to install or remove.

I'm new to arch and pacman, but I've been a linux user for years. I installed archlinux a week or two ago and I have been adding and deleting various packages with pacman with no issues until today.
I won't waste space here with the entire mirrorlist, but here is an example line where the error occurs of the line is uncommented...
#Server = http://mirrors.xmission.com/archlinux/$repo/os/$arch
and here is the /etc/pacman.conf file...
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl -C - %u > %o
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
## Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
#[community-testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs

My safari keeps crashing and my youtube keeps getting playback errors. Help!

I am currently usin an iPod 4th generation with IOS 6.1.5. Whenever I open up the safari app, it will stay blank and crash after about a minute or so. Following, I cannot watch videos on my YouTube app beecause it keeps receiving a playback error. I have already shutdown my iPod as well as reseting all settings. I have tried nearly everything but nothing has changed. Please help!

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Safari and Clear Cookiers, Histoiry and Data
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
For YouTube:
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

I'm trying to use kerberos V5 with ActiveDirectory but get an error

I'm trying to use kerberos V5 with ActiveDirectory im using simple code from previuos posts but
when i try with correct username/password i get :
Authentication attempt failedjavax.security.auth.login.LoginException: Message stream modified (41)
when i try incorrect username/pass i get :
Pre-authentication information was invalid (24)
Debug info is :
Debug is true storeKey false useTicketCache false useKeyTab false doNotPrompt false ticketCache is null isInitiator true KeyTab is null refreshKrb5Config is false principal is null tryFirstPass is false useFirstPass is false storePass is false clearPass is false
Kerberos username [naiden]: naiden
Kerberos password for naiden:      naiden
          [Krb5LoginModule] user entered username: naiden
Acquire TGT using AS Exchange
          [Krb5LoginModule] authentication failed
Pre-authentication information was invalid (24)
Authentication attempt failedjavax.security.auth.login.LoginException: Java code is :
import javax.naming.*;
import javax.naming.directory.*;
import javax.security.auth.login.*;
import javax.security.auth.Subject;
import com.sun.security.auth.callback.TextCallbackHandler;
import java.util.Hashtable;
* Demonstrates how to create an initial context to an LDAP server
* using "GSSAPI" SASL authentication (Kerberos v5).
* Requires J2SE 1.4, or JNDI 1.2 with ldapbp.jar, JAAS, JCE, an RFC 2853
* compliant implementation of J-GSS and a Kerberos v5 implementation.
* Jaas.conf
* racfldap.GssExample {com.sun.security.auth.module.Krb5LoginModule required client=TRUE useTicketCache=true doNotPrompt=true; };
* 'qop' is a comma separated list of tokens, each of which is one of
* auth, auth-int, or auth-conf. If none is supplied, the default is 'auth'.
class KerberosExample {
public static void main(String[] args) {
java.util.Properties p = new java.util.Properties(System.getProperties());
p.setProperty("java.security.krb5.realm", "ISY");
p.setProperty("java.security.krb5.kdc", "192.168.0.101");
p.setProperty("java.security.auth.login.config", "C:\\jaas.conf");
System.setProperties(p);
// 1. Log in (to Kerberos)
LoginContext lc = null;
try {
lc = new LoginContext("ISY",
new TextCallbackHandler());
// Attempt authentication
lc.login();
} catch (LoginException le) {
System.err.println("Authentication attempt failed" + le);
System.exit(-1);
// 2. Perform JNDI work as logged in subject
Subject.doAs(lc.getSubject(), new LDAPAction(args));
// 3. Perform LDAP Action
* The application must supply a PrivilegedAction that is to be run
* inside a Subject.doAs() or Subject.doAsPrivileged().
class LDAPAction implements java.security.PrivilegedAction {
private String[] args;
private static String[] sAttrIDs;
private static String sUserAccount = new String("Administrator");
public LDAPAction(String[] origArgs) {
this.args = (String[])origArgs.clone();
public Object run() {
performLDAPOperation(args);
return null;
private static void performLDAPOperation(String[] args) {
// Set up environment for creating initial context
Hashtable env = new Hashtable(11);
env.put(Context.INITIAL_CONTEXT_FACTORY,
"com.sun.jndi.ldap.LdapCtxFactory");
// Must use fully qualified hostname
env.put(Context.PROVIDER_URL, "ldap://192.168.0.101:389/DC=isy,DC=local");
// Request the use of the "GSSAPI" SASL mechanism
// Authenticate by using already established Kerberos credentials
env.put(Context.SECURITY_AUTHENTICATION, "GSSAPI");
env.put("javax.security.sasl.server.authentication", "true");
try {
/* Create initial context */
DirContext ctx = new InitialDirContext(env);
/* Get the attributes requested */
Attributes aAnswer =ctx.getAttributes( "CN="+ sUserAccount + ",CN=Users,DC=isy,DC=local");
NamingEnumeration enumUserInfo = aAnswer.getAll();
while(enumUserInfo.hasMoreElements()) {
System.out.println(enumUserInfo.nextElement().toString());
// Close the context when we're done
ctx.close();
} catch (NamingException e) {
e.printStackTrace();
}JAAS conf file is :
ISY {
     com.sun.security.auth.module.Krb5LoginModule required
debug=true;
};krb5.ini file is :
# Kerberos 5 Configuration File
# All available options are specified in the Kerberos System Administrator's Guide. Very
# few are used here.
# Determines which Kerberos realm a machine should be in, given its domain name. This is
# especially important when obtaining AFS tokens - in afsdcell.ini in the Windows directory
# there should be an entry for your AFS cell name, followed by a list of IP addresses, and,
# after a # symbol, the name of the server corresponding to each IP address.
[libdefaults]
     default_realm = ISY
[domain_realm]
     .isy.local = ISY
     isy.local = ISY
# Specifies all the server information for each realm.
#[realms]
     ISY=
          kdc = 192.168.0.101
          admin_server = 192.168.0.101
          default_domain = ISY
     }

Now it works
i will try to explain how i do this :
step 1 )
fallow this guide http://www.cit.cornell.edu/computer/system/win2000/kerberos/
and configure AD to use kerberos and to heve Kerberos REALM
step 2 ) try windows login to the new realm to be sure that it works ADD trusted realm if needed.
step 3 ) create jaas.conf file for example in c:\
it looks like this :
ISY {
     com.sun.security.auth.module.Krb5LoginModule required
debug=true;
};step 4)
( dont forget to make mappings which are explained in step 1 ) go to Active Directory users make sure from View to check Advanced Features Right click on the user go to mappings in secound tab kerberos mapping add USERNAME@KERBEROSreaLm for example [email protected]
step 5)
copy+paste this code and HIT RUN :)
import java.util.Hashtable;
import javax.naming.Context;
import javax.naming.NamingEnumeration;
import javax.naming.NamingException;
import javax.naming.directory.Attributes;
import javax.naming.directory.DirContext;
import javax.naming.directory.InitialDirContext;
import javax.naming.directory.SearchControls;
import javax.naming.directory.SearchResult;
import javax.security.auth.Subject;
import javax.security.auth.login.LoginContext;
import javax.security.auth.login.LoginException;
import com.sun.security.auth.callback.TextCallbackHandler;
public class Main {
    public static void main(String[] args) {
    java.util.Properties p = new java.util.Properties(System.getProperties());
    p.setProperty("java.security.krb5.realm", "ISY.LOCAL");
    p.setProperty("java.security.krb5.kdc", "192.168.0.101");
    p.setProperty("java.security.auth.login.config", "C:\\jaas.conf");
    System.setProperties(p);
    // 1. Log in (to Kerberos)
    LoginContext lc = null;
    try {
            lc = new LoginContext("ISY", new TextCallbackHandler());
    // Attempt authentication
    lc.login();
    } catch (LoginException le) {
    System.err.println("Authentication attempt failed" + le);
    System.exit(-1);
    // 2. Perform JNDI work as logged in subject
    Subject.doAs(lc.getSubject(), new LDAPAction(args));
    // 3. Perform LDAP Action
    * The application must supply a PrivilegedAction that is to be run
    * inside a Subject.doAs() or Subject.doAsPrivileged().
    class LDAPAction implements java.security.PrivilegedAction {
    private String[] args;
    private static String[] sAttrIDs;
    private static String sUserAccount = new String("Administrator");
    public LDAPAction(String[] origArgs) {
    this.args = origArgs.clone();
    public Object run() {
    performLDAPOperation(args);
    return null;
    private static void performLDAPOperation(String[] args) {
    // Set up environment for creating initial context
    Hashtable env = new Hashtable(11);
    env.put(Context.INITIAL_CONTEXT_FACTORY,
    "com.sun.jndi.ldap.LdapCtxFactory");
    // Must use fully qualified hostname
    env.put(Context.PROVIDER_URL, "ldap://192.168.0.101:389");
    // Request the use of the "GSSAPI" SASL mechanism
    // Authenticate by using already established Kerberos credentials
    env.put(Context.SECURITY_AUTHENTICATION, "GSSAPI");
//    env.put("javax.security.sasl.server.authentication", "true");
    try {
    /* Create initial context */
    DirContext ctx = new InitialDirContext(env);
    /* Get the attributes requested */
    //Create the search controls
    SearchControls searchCtls = new SearchControls();
    //Specify the attributes to return
    String returnedAtts[]={"sn","givenName","mail"};
    searchCtls.setReturningAttributes(returnedAtts);
    //Specify the search scope
    searchCtls.setSearchScope(SearchControls.SUBTREE_SCOPE);
    //specify the LDAP search filter
    String searchFilter = "(&(objectClass=user)(mail=*))";
    //Specify the Base for the search
    String searchBase = "DC=isy,DC=local";
    //initialize counter to total the results
    int totalResults = 0;
    // Search for objects using the filter
    NamingEnumeration answer = ctx.search(searchBase, searchFilter, searchCtls);
    //Loop through the search results
    while (answer.hasMoreElements()) {
            SearchResult sr = (SearchResult)answer.next();
        totalResults++;
        System.out.println(">>>" + sr.getName());
        // Print out some of the attributes, catch the exception if the attributes have no values
        Attributes attrs = sr.getAttributes();
        if (attrs != null) {
            try {
            System.out.println("   surname: " + attrs.get("sn").get());
            System.out.println("   firstname: " + attrs.get("givenName").get());
            System.out.println("   mail: " + attrs.get("mail").get());
            catch (NullPointerException e)    {
            System.err.println("Error listing attributes: " + e);
    System.out.println("RABOTIII");
        System.out.println("Total results: " + totalResults);
    ctx.close();
    } catch (NamingException e) {
    e.printStackTrace();
}It will ask for username and password
type for example : [email protected] for username
and password : TheSecretPassword
where ISY.LOCAL is the name of kerberos realm.
p.s. it is not good idea to use Administrator as login :)
Edited by: JOKe on Sep 14, 2007 2:23 PM

Trying to sync iPhone 4 with itunes and get an error message PLEASE help

I am currently using and iPhone 4. This morning I had synced my iPhone with itunes and it was working fine. I came home and wanted to add some music and such to it and all of a sudden i will plug it in to itunes and i,t looks like its going gets to step 2 of 6 (which is the back up process) and then an error message comes up saying itunes has stopped working, my only option to do is exit the window..
Any ideas why this would be the case? its really frustrating me. I am also not the most computer savvy.
Thanks

Try reinstalling iTunes http://www.apple.com/itunes/
If that doesn't help, if you are using a Windows based computer, could be your anti virus software or your firewall that's preventing the sync.
iTunes for Windows: Troubleshooting security software issues

When syncing my iPhone with iTunes, I get the error, "some items did not sync, see itunes for help", but can't find any helps for this in iTunes. Where can I find out what is not syncing?

When syncing my iPhone with my iPhone, I get a message that 2 items did not sync - use iTunes for help.
But I can't find any help information in iTunes at all, let alone when items are not syncing.
How do I figure out what is not syncing?

Since it seems App related, I'm not sure what to offer you. I guess the only suggestion I have is for you to reboot your iPad and then try again. To reboot, hold the power and home buttons at the same time for at least 10 seconds (keep holding past the swipe to shut down bar if it appears) until the Apple Logo appears, then let go of both buttons and your iPad will restart. You won't lose any settings or data, so it's worth a shot.

HTML Article with YouTube iframe gets an error

Similar Messages

Maybe you are looking for