HTML code appears corrupted - anyone run into this problem?
Using RH8 HTML - All of my topics have unusual spacing in the html code. This happens with a brand new project - starting right from the menu to select a new project. As soon as the project is created I go into the first topic and look at the html code and it looks something like this:
OK, even though it's hard to read, you can get the jist of it. This happens with old or new projects.
I am hoping I do not have to have our IT staff perform a uninstall/install. Any feedback is greatly appreciate.
Rob
Just want to add that the usual trick of restoring the default font to Courier at 100% does not work as the dropdown is blank when Robert accesses it.
Also this applies to any project Robert opens, including the samples.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge
Similar Messages
-
When I plug my iPhone 4s into my PC, I get a message that says iTunes needs a newer version of Apple Mobile Device Support. It wants me to uninstall both the AMDS and iTunes and then reinstall iTunes. iTunes won't recognize my phone and so I can't synch it. Has anyone else run into this problem recently and how did you resolve it? Thanks!
Thank you both. I suppose I should have prefaced my question with the concern that I've read a number of other posts from people who have had a similar issue and when they tried to follow the directions, they ran into a multitude of other problems. As you might imagine, I'm hoping to avoid the creation of new problems as I try to solve this one. Thanks again.
-
The iPhone cannot be synced. Unknown error (13019) - anyone run into this?
The iPhone cannot be synced. Unknown error (13019) - anyone run into this?
Stephen's got you covered.
I've also seen the following reported cause/workaround:
After several Google searches I found the iPad syncing problem to be caused by iPhoto 9.4 not handling the & correctly in names. It's not recognizing them as & which is causing problems with XML. You can manually change them or wait for Apple to issue a fix to iPhoto 9.4. I started to do the manual fix & I just have too many to change.
(Manual renaming isn't going to be an easy/good workaround for a bunch of folks, though.) -
Has anyone run into the problem of downloading or opening an E.pdf file? I am running on 10.6.8 and am unable to open the file. Any suggestions?
That crash appears to be casued by the Facebook plug-in.
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account. -
I am trying to use the brightness adjustment on a grayscale photoshop CS6 file. The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment. I have run into this problem before, although rarely, with some other files over the years and with earlier versions of CS. I would like to know how to overcome this problem?
Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.
-
Browse in iBooks on my iPad does not work. When tapping on the author name nothing appears. Is anyone else having this problem?
it does not show up in photostream in iphoto on my imac. Everything is activated and turned on.
Just in case, on your iMac, open System Preferences > iCloud
Make sure Photo Stream is switched to on.
If it was already on, switch that off. Restart your iMac, restart your iPhone.
See if photos sync between the iMac and iPhone. -
Has anyone else run into this problem?
I am developing a combined java and flex project, and it was working fine as a web app. Usinf flash builder I converted it to a desktop air project, and now it fails to send messages to java. eg, My test code just calls a java class's hello() method when i click a button, and an alert shows "hello", which is what the java class returns. However I get an error in the air version, when I click the button it gives an error saying:
faultCode:Client.Error.MessageSend
faultString:'Send failed'
faultDetail:'Channel.Connect.Failed error
NetConnection.Call.Failed: HTTP: Failed: url:
'http://ombination.swf/Combination/messagebroker/amf''
I can see the problem there, my project is called Combination, as is the swf file but for some reason it is looking for "ombination.swf". Weird problem any ideas? I tried changing the name of the swf file to ombination as a quick fix, but then the air can't load it.As I originally said, 'with the best will in the world', and that is not a narrow minded approach. More, had you spent a little time on the net you could have located this link ...
http://www.lmp-adapter.com/site/index.cfm?nodeRoute=d05&step=2f322&l=1&vsprache= en&id_art=80839&plainerr=1
And if this is not enough, if you will oblige us with details of the item you complain about, I will try to locate more info for you.
But frankly, I think you should try a little harder to help yourself. -
does anyone know what password they are looking for when asked to backup phone? tried apple id and keyboard lock password but no luck ? was asked after update said backup not complete please enter password?
I think it is asking for the password for your encrypted backup.
Encrypted backup
http://support.apple.com/kb/ht4946 -
I have tried restoring my backup and repeating the Mavericks and server upgrade and have the same result.
How long have you let it go? My initial upgrade seemed to hang at the same spot, but it ended up moving on after about 30 minutes.
Be sure to repair disk permission and check for errors before getting started. -
Long story short, I'm trying to progress from my first gen iPhone to my iPhone 4s. I sync my first gen as directed to create a backup, and then restore my 4s to the first gen backup. However, once this is done (and it does successfully transfer my first gen phone apps, photos, texts, calendar, etc-etc to my 4s), my 4s phone no longer has 4g data like it did prior to syncing - it doesn't recognize my data plan at all. The only way I can access the internet is through my wi-fi. So then I have to reset to factory settings and re-plus my personal settings into the 4s but then I lose everything from the first gen transfer. Any thoughts and/or recommendations/suggestions? Many thanks.
Long story short, I'm trying to progress from my first gen iPhone to my iPhone 4s. I sync my first gen as directed to create a backup, and then restore my 4s to the first gen backup. However, once this is done (and it does successfully transfer my first gen phone apps, photos, texts, calendar, etc-etc to my 4s), my 4s phone no longer has 4g data like it did prior to syncing - it doesn't recognize my data plan at all. The only way I can access the internet is through my wi-fi. So then I have to reset to factory settings and re-plus my personal settings into the 4s but then I lose everything from the first gen transfer. Any thoughts and/or recommendations/suggestions? Many thanks.
-
First time submission. Sorry if I'm doing it wrong.
Others have reported that problem.
If you want Apple to know report it at: http://www.apple.com/feedback/ipad.html -
I uploaded photos from my iPhone.
When I try to edit them on my Mac, nothing happens. I can move all the adjustment bars (brightness, shadows, highlights, etc., but nothing happens to the photo.I had the same problem, it never happened in iPhoto.
Simple solution: quit Photos and start again, it will work. -
Can't get it to work...anyone else have this problem?
First off, it takes a very long time to boot up. Maybe that's normal. Then I get taken to the choose language screen, then the choose format screen. After this, it takes me to the apple recovery screen. I can't get off this screen without choosing either restart, run diagnostics, or factory reset. Everytime I restart, it takes me right back to this screen. If I choose run diagnostics, it says everything is fine. When I do a factory reset, it errors out telling me that it can't perform this action. Has anybody else run into this problem? I have tried pulling the plug and everything else I can think of. Maybe I just have a defective unit.
You should call AppleCare or visit the Genius Bar (by appointment only) at your Apple Store. Sorry.
-
There is no "deactivate" function and the technical support person I chatted with recommended I come here. Can I just use the serial number again? How can I deactive? Has anyone else run into this? How can I get Dreamweaver 8, which is no longer being activated by Adobe, on a new computer? Is it even worth doing or do I need to get a new version. What are the killer features I'm missing?
If you manage to get it installed on your current OS, don't forget to install the 8.02 update.
Adobe - Dreamweaver Support Center : Updaters
Nancy O. -
I am using a PC and installed the latest update of all the CC programs I use (AI, PS, AE, etc.) and within Illustrator I've noticed the Shape Builder Tool doesn't behave exactly as it did in the past. (And not in a good way.)
Previous versions allowed me to edit/add/remove shapes from one another without issue (leaving all shape paths as they were before the editing while making the desired alterations), but the newest behavior seems to alter existing paths once shapes are merged/deleted making the tool almost non-usable.
Not sure if there's a check box I'm missing or what, but have done some brief research on the problem and haven't found anything helpful. If anyone has run into this issue and/or knows a way to correct it, I would greatly appreciate it
Thanks!Please show a screenshot before and after.
Maybe you are looking for
-
I was moving my laptop while the iPod was plugged in and I accidently pulled on the cord halfway out of the iPod's plug. I pushed it back in but all of my music wsa deleted and even after trying to restore the iPod to factory settings I cannot get an
-
My headphones only work if I use the front port, however I want to talk and listen through my headphones and it's not letting me do this
-
Control CRM- R/3 BP replication based on BP status
Hi Experts, In Our scenario all BP's created in CRM gets "Not released" flag by default. And it goes through a workflow cycle to release the flag. We want to replicate the BP's to R/3 only once the "Not released" flag is removed. Can you please shar
-
I bought an rca cable to connect my ipod to my stereo reciever. but by accident i plugged it into the rec out jacks on the reciever and tried to play a song. did this damage my ipod?
-
Users do not appear out of OID in weblogic
I want to do SSO for webcenter Do as it is written in Oracle ® Retail Accelerators Guide for WebCenter 11g. You must add the OSSO Identity Asserter to a WebLogic domain. In addition to the OSSO Identity Asserter, Oracle recommends the following Authe