HTTP 401 Authorization error in DMS KPro implementation

Experts,
We had setup the DMS KPro with Http Content Server. Getting error '401' HTTP Authorization.
Please suggest on action to be taken - We are stuck up. CSADMIN - not allowing even if 'Everyone' authorization given in the OS.
Any suggestions?
Thanks/Regards
Dhasarathy

How can I do to make this password check??? where and how to ??
Thanks

Similar Messages

SOAP Asynch Message Giving HTTP 401 Unauthorized error

Hi experts,
 
We are sending ORDERS IDOC Asynchronously from ECC To XI and XI is sending it to Vendor using SOAP.
This interface was working OK and now we had HTTP 401 error. Checked URL,Username and password to the Vendor. It looks OK. It is working OK if I try it in browser.

 
I tried to refresh the object by changing values and reactivating,did cache refresh..Still didn't work.When I try to check for the problem found J2EE_GUEST user was locked.Same was unlocked and tried again.

 
This IDOC is requesting for acknowledgement( trying to suppress ack by running IDX_NOALE).
But now I need to reprocess these failed messages.I was trying in different ways and it is not going thru.
Any pointers are really appreciated.

Adapter Engine Log is as follows:
 
2009-10-27 16:37:30 Success The message was successfully retrieved from the receive queue.
 
2009-10-27 16:37:30 Success The message status set to DLNG.
 
2009-10-27 16:37:30 Success Delivering to channel: CC_ORDERS05_TO_XYZ_SOAP
 
2009-10-27 16:37:30 Success MP: Entering module processor
 
2009-10-27 16:37:30 Success MP: Processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
 2009-10-27 16:37:30 Success SOAP: request message entering the adapter with user J2EE_GUEST
 2009-10-27 16:37:30 Error Exception caught by adapter framework: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 401 Unauthorized
 2009-10-27 16:37:30 Success SOAP: completed the processing
 2009-10-27 16:37:30 Error SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 401 Unauthorized
 2009-10-27 16:37:30 Success SOAP: sending a delivery error ack ...
 2009-10-27 16:37:30 Success SOAP: sent a delivery error ack
 2009-10-27 16:37:30 Success Acknowledgement creation triggered for type: SystemErrorAck
 2009-10-27 16:37:30 Success Acknowledgement creation triggered for type: AckNotSupported
 2009-10-27 16:37:30 Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 401 Unauthorized
 2009-10-27 16:37:30 Success Acknowledgement sent successfully for type: SystemErrorAck
 2009-10-27 16:37:30 Success Acknowledgement sent successfully for type: AckNotSupported
 2009-10-27 16:37:30 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 401 Unauthorized.
 2009-10-27 16:37:30 Error The message status set to NDLV.
 
 Regards,
 Ramesh
Edited by: RameshK99 on Oct 28, 2009 1:57 AM

Can you run a sniffer tool & see the actual reason for 401 unauthorized error? 6172 weblog: Troubleshooting SOAP, HTTP and Mail Adapter Scenarios with TCPGateway by Stefan Grube...
Generally, 401 unauthorized is when the target system rejects the request... Also, What type of authentication does the target webservice have.?? B'cos i ran into a similar problem with Ms-Webservice. (they were using NTLM authentication). It works from a browser but not from PI. So we installed SOAP-AXIS adapter to support NTLM based authentication.
Regards,
Siva Maranani

HTTP 401 Unauthorized, error in proxy to SOAP Scenario

Hi all,
We got the below error in our proxy to SOAP Scenario.
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized
We configured User Authentication,Proxy and Proxy User Authentication for the Receiver Communication Channel correctly still we are getting this error.
So please let me know what could be the possible reasons behind it and how to resolve it.
Waiting for your valuable response.

Hi,
Consider the parameters connection pool size and connection wait time:
ume.r3.connection.master.poolmaxsize
ume.r3.connection.master.poolmaxwait
These parameters are described in the note below:
#821026 - AdapterEngine messaging URL returns HTTP 401 under high load
Also, ensure you have maintained the correct password, which MUST be the same, for all the service users
on XI. You may check all the places it should be maintained, such as Exchange Profile, SU01, SLDAPICUST, etc..
Please kindly check the note below:
PI 7.1:
#999962 - PI 7.10: Change passwords of PI service users
XI 7.0
#936093 - XI 7.0: Changing the passwords of XI service users
XI 3.0
#721548 - XI 3.0: Changing the passwords of the XI service users
And ensure that the user has the correct role as per link below:
http://help.sap.com/saphelp_nwpi71/helpdata/en/9f/d12940cbf2195de10000000a1550b0/frameset.htm
Regards,
Caio Cagnani

SOAP - HTTP 401 Unauthorised error

Hi,
THe scenario is FILE - XI - WEB SERVICE.
My SOAP receiver communication channel throws the following error:
"Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized"
If I try to send the data through XML SPY I get the same 401 exception. But when I open the portal through browser with the same user ID and password ,it opens the portal view.
Please suggest
Thanks,
Tiny

Hi Tiny,
Any of the following could be the reason:
u2022 Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
u2022 If the error is in XI Adapter, then your port entry should J2EE port 5<System no>
u2022 If the error is in Adapter Engine
u2013then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
u2022 May be wrong password for user XIISUSER
u2022 May be wrong password for user XIAFUSER
u2013 for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message
Regards,
Divya

I am getting an error message 401 Authorization?

When I try to open with Firefox it just says 401 Authorization error. It says something about an error with authentication?

Hi-
What machine?
Try a logic board reset:
Unplug ALL connections to the tower and unplug the AC cord.
Allow the machine to sit in the disconnected condition for 15-30 minutes.
Reconnect all cables and power and try again.
After that, possibly a PRAM reset, more probably a NVRAM reset would be worth a try.
Final steps would be a PMU/SMU reset.
For troubleshooting the software end, try refreshing the profiler (Command+R) after unplugging and replugging a fire wire device.
Next, try a different user account, followed by a reinstall of OS X.

SOAP Adapter - HTTP 401

Hi all,
i'm pretty new to SAP-PI and need some help.
We have following asynchronous scenario : XI-Adapter >>> XI >>> SOAP-Adapter to transfer data from ERP to a 3rd Party-System.
After some changes by the Web-Service-Provider ( certificate & user creditentials) we get a HTTP 401 - Unauthorized Error.
What we did:
imported the new certificate
set the new creditentials in the communication channel for authentification

Hi,
many thank for your quick responses!
Yesterday evening i decided to do a full cache refresh. Now i am receiving following error:
Error in call over HTTP: HTTP 0 null
[EXCEPTION]
java.io.Exception: Failed to get the input stream from socket: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by ChainVerifier...
After that i tried to set the parameter
     Module key: soap
     paramname: trustStore
     paramvalue: TrustedCAs
for the the module XISOAPAdapterBean in the CC, but i'm still receiving the same error.
So i think something is wrong with the new certificate. Our Basis-Team is checking this atm.
Regards
Kai

HTTP 401 error while connecting SAP PI 7.1 with SOAPAdapter

Hello,
I am trying to call webservice on R/3 system using SAP PI 7.1 but I am getting HTTP 401 error.
Following is the error for more detail:
Message: Server returned error code = 401 for URI : http://sapxx03x:50000/XISOAPAdapter/MessageServlet?channel=:BS_xxxxxxxxxxx_50:CC_xxxxxxxxxxxxx_WSDL_Sender.
same url when I use with SAP XI 3.0 it works fine. It is only giving problem with PI 7.1
I know this issue is related to authentication but what problem I am facing is how to pass the credentical with the url to
resolve this authentication issue? Are there any settings I am missing? or Any other way of doing it?
I have already tried following things to resolve this issue:
1. tried giving user id & password in URL but still having same error HTTP 401.
2. tried one of the SAP note (891877) regarding Netweaver Administration to change ROLE settings but problme still persist.
3. Checked SAP Help settings
4. Did changes to web.xml file to comment the security part and restarted the system
But, Problem still exist.
Please let me know what will be the solution for this issue.
Thanks,
Anand

Hello Abhishek,
Fine I will try using new URL but user id & password are working fine with PI 7.1.
I tried running URL directly and it is working fine and giving following message:
Message Servlet is in Status OK
Status information:
Servlet com.sap.aii.adapter.soap.web.MessageServlet (Version $Id: //tc/xpi.adapters/NWxx_xx_xxx/src/_soap_application_web_module/webm/api/com/sap/aii/adapter/soap/web/MessageServlet.java#1 $) bound to /MessageServlet
Classname ModuleProcessor: null
Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
Lookupname for remoteModuleProcessorLookupName: null
ModuleProcessorClass not instantiated
ModuleProcessorLocal is Instance of $Proxy45_10002
ModuleProcessorRemote not instantiated
Any other pointers,
Thanks,
Anand

Http 401 error starting a managed server

Hi,
I'm new to wl and am setting up a managed server on wl6.0.
I read and followed the instructions in the admin guide - really!
I have an admin server running under the petstore domain,
on port 7001 and am trying to run a managed server under
"devdomain".
Below is the java command my startup script is using
to start the managed server. It is failing with a security
error (http 401). I don't see anything in the dox about an
additional userid/password control at the http level.
When I browse directly to http://webdev:7001/Bootstrap,
I get http password pop-up. The system userid and password
does not work.
What dox can I go to for help on this?
Thx
Jim Brockman
java -ms64m -mx64m -classpath
/opt/bea/wlserver6.0:/opt/bea/wlserver6.0/lib/weblogic_sp.jar:/opt/bea/wlser
ver6.0/lib/weblogic.jar:/opt/bea:/opt/bea/wlserver6.0/lib/jdbctype4drivers/c
lasses12.zip -Dweblogic.Domain=devdomain -Dweblogic.Name=devserver -Dweblogi
c.management.server=webdev:7001 -Djava.security.policy=/opt/bea/wlserver6.0/
lib/weblogic.policy -Dweblogic.management.username=system -Dweblogic.managem
ent.password=xxxxxxxx weblogic.Server
Starting WebLogic Server ....
Connecting to http://webdev:7001...
The WebLogic Server did not start up properly.
Exception raised:
weblogic.management.configuration.ConfigurationException:
connecting to http://webdev:7001/Bootstrap/ - with nested exception:
[weblogic.net.http.HttpUnauthorizedException: 401]
weblogic.net.http.HttpUnauthorizedException: 401
at
weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:32
8)
at
java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:230)
at
weblogic.management.Admin.getBootstrapLocalServer(Admin.java:825)
at weblogic.management.Admin.initialize(Admin.java:274)

I solved the problem in this command.....
/opt/bea/wlserver6.0:/opt/bea/wlserver6.0/lib/weblogic_sp.jar:/opt/bea/wlser
ver6.0/lib/weblogic.jar:/opt/bea:/opt/bea/wlserver6.0/lib/jdbctype4drivers/c
lasses12.zip -Dweblogic.Domain=devdomain -Dweblogic.Name=devserver -Dweblogi
c.management.server=webdev:7001 -Djava.security.policy=/opt/bea/wlserver6.0/
lib/weblogic.policy -Dweblogic.management.username=system -Dweblogic.managem
ent.password=xxxxxxxx weblogic.Server
When I put the password in the script, the problem is disapeared...
Jim Brockman wrote:
Hi,
I'm new to wl and am setting up a managed server on wl6.0.
I read and followed the instructions in the admin guide - really!
I have an admin server running under the petstore domain,
on port 7001 and am trying to run a managed server under
"devdomain".
Below is the java command my startup script is using
to start the managed server. It is failing with a security
error (http 401). I don't see anything in the dox about an
additional userid/password control at the http level.
When I browse directly to http://webdev:7001/Bootstrap,
I get http password pop-up. The system userid and password
does not work.
What dox can I go to for help on this?
Thx
Jim Brockman
java -ms64m -mx64m -classpath
/opt/bea/wlserver6.0:/opt/bea/wlserver6.0/lib/weblogic_sp.jar:/opt/bea/wlser
ver6.0/lib/weblogic.jar:/opt/bea:/opt/bea/wlserver6.0/lib/jdbctype4drivers/c
lasses12.zip -Dweblogic.Domain=devdomain -Dweblogic.Name=devserver -Dweblogi
c.management.server=webdev:7001 -Djava.security.policy=/opt/bea/wlserver6.0/
lib/weblogic.policy -Dweblogic.management.username=system -Dweblogic.managem
ent.password=xxxxxxxx weblogic.Server
Starting WebLogic Server ....
Connecting to http://webdev:7001...
The WebLogic Server did not start up properly.
Exception raised:
weblogic.management.configuration.ConfigurationException:
connecting to http://webdev:7001/Bootstrap/ - with nested exception:
[weblogic.net.http.HttpUnauthorizedException: 401]
weblogic.net.http.HttpUnauthorizedException: 401
at
weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:32
8)
at
java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:230)
at
weblogic.management.Admin.getBootstrapLocalServer(Admin.java:825)
at weblogic.management.Admin.initialize(Admin.java:274)--
Doyoung Im
Bea Systems Korea
Sales Engineer/Pre Sales
H.P) 82-11-9727-8923
DID) 82-2 -7676-823
Fax) 82-2 -783-7102
mail)[email protected]

PI 7.0 - Error HTTP 401 when calling XISOAPAdapter/MessageServlet

Hi experts,
I am trying to call a web service, published from our XI system. (SAP PI 7.0 SP 15).
I generated the Web Service & saved the WSDL successfully from Integration Directory.
The whole scenario is well designed and configured, because it had been working well for some time.
I am using XMLSpy to send a request (something that have been working well) but now, we are unable to log on to the system.
It doesnt matter with which user we try to log on. Its simply not possible. It raises a HTTP 401 ERROR.
The configuration channel SOAP SENDER is configured like this.
- SOAP - SENDER
- Transport Protocol HTTP
- HTTP Security Level : HTTP
- QOF - BEST EFFORT.
Another symptom
when i call the service http://<host>:<50nn00>/XISOAPAdapter/MessageServlet (on DEV system) it doesnt work.
"401 Unauthorized
Cannot authenticate the user.
Details: No details available"
when i call the same service (but on QA system) it works well.
(the calls from XMLSpy work fine, and the interface executes well)
Message Servlet is in Status OK
Status information:
Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/xi/NW04S_14_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#1 $) bound to /MessageServlet
Classname ModuleProcessor: null
Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
Lookupname for remoteModuleProcessorLookupName: null
ModuleProcessorClass not instantiated
ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0
ModuleProcessorRemote not instantiated
I will appreciate if you could give me some advice, which configuration i need to check, or any usefull information.
Thanks!
Cristian.

Hi Supriya, thanks for your reply.
I ve tryed with my user, which is not locked, and also with other users, none of them locke. With SAP_ALL and SAP_NEW profiles. And it didnt work.
The url is something like that.
for DEV:
http://myhost:50000/XISOAPAdapter/MessageServlet
for QA:
http://myhost:50200/XISOAPAdapter/MessageServlet
Since DEV and QA instances are on the same server.
Thanks.
Cristian.

Error Handling and alert for HTTP 401

Hi Experts,
We have an asynchronous ECC (Proxy) -> File via local processing. 1 of the outbound proxy message encountered 401 HTTP_RESP_STATUS_CODE_NOT_OK error and didn't reach PI. We have used exception class CX_AI_SYSTEM_FAULT in our program but the error was not caught.
1. Can we really catch this error via exception class CX_AI_SYSTEM_FAULT?
2. If not, how can we catch this error and also notify/alert us when such error occurred in ECC when sending the proxy message to PI?
3. Outbound proxy errors can only be handled in ECC itself and not in PI?
Has anyone done this before? Appreciate your inputs regarding this matter.
Thank you so much!
Mark

Hi,
We've just used Acknowledgements for Asynchronous in our client proxy to capture system errors in ECC such as this. http://help.sap.com/saphelp_nw70/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
Regards,
Mark

How to return "HTTP/1.0 401 Authorization Required" from OSB's Message Flow

How can I return "HTTP/1.0 401 Authorization Required" header from OSB's Message Flow?
Using of "HTTP Transport -> Authentification" is not possible, because I need flow condition. Transports Headers activity from design palette doesn't allow to send such headers.
Practical usage: request for kerberos ticket by sending two headers: 401 and WWW-Authenticate: Negotiate...

Can you briefly expand the use case for better understanding?
HTTP Client---> Hand Shakes or what ever ----> HTTP Proxy (OSB )---> Pipeline----
Philosophy behind pipeline is that it is designed to work on the request. Correct me if I'm wrong.
What you are asking is ability to control the hand shake either in Pipeline or some way during proxy configuration. Unfortunately there is no configuration that is exposed for HTTP proxies in OSB to control that behavior.
Manoj

Suspended Workflow in SharePoint 2013 with HTTP 401 Error!

I have a list workflow which starts automatically when creating an item to generate a serial number. But when any user create
a new item, the workflow suspend with the following details, and only the users with "Full Control" permissions can make the workflow work:
RequestorId: eda26c74-95ef-2733-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow
instance. Exception details: System.ApplicationException: HTTP 401 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["1"],"SPClientServiceRequestDuration":["88"],"SPRequestGuid":["eda26c74-95ef-2733-87b9-028d0512861d"],"request-id":["eda26c74-95ef-2733-87b9-028d0512861d"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"Cache-Control":["max-age=0,
private"],"Server":["Microsoft-IIS\/8.0"],"WWW-Authenticate":["NTLM","Basic realm=\"sp.contoso.com\""],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Sun, 27 Apr 2014 11:13:07 GMT"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)

Hi AmrHanmam,
According to your description, my understanding is that SharePoint 2013 workflow suspend with 401 error.
For resolving your issue , please do as the followings:
Be sure User profile synchronization is started.
The user by whom you are logged is available in User Profile list.
Final step full synchronization of User Profile Application.
Here is a similar post for your reference:
http://social.technet.microsoft.com/Forums/en-US/8671e31e-fde2-454c-aba4-0fc6484dd873/sharepoint-2013-workflow-suspend-with-401-error?forum=sharepointcustomization
In addition, there is another reason for this issue, please take a look at:
http://support.microsoft.com/kb/2839070/en-us
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

HTTP error: 401 (unauthorized) "Error in configSet"

Hi ,
I am getting this error "HTTP error: 401 (unauthorized) "Error in configSet" in the following scenarios.
A. Creating a content repository from SAP in T-code "CSADMIN"
B.Accessing the http://<domainname>:<portno>
If i give complete URL it is working.
Example :
http://<domain name>:<port no>/ContentServer/ContentServer.dll?serverInfo
when i provide,only with domain name and password in the url
it is asking for username & password and later it gives 401 unauthorized error
http://<domainname>:<portno>
I assume that this error is due the security settings either in IIS or in OS level.
system landscape:
CRM :5.0
SAP Content Server :6.3
Win server 2003 with sp2
Note:
Content Server is running and i can see the status from SAP.
Thanks in Advance.
Points will be awardeed for right answers.
Regards
Ganesh
Edited by: ganesh subbiah on Aug 13, 2008 4:39 PM

Check the following :
- In IIS application pools check "Identity" property for the content server application is "LocalSystem", and not ApplicationPoolIdentity
- in IIS "handler mapping" on your content server site, check ISAPI-dll is enabled
- user access for "NETWORK SERVICE" following note 658442 - execute command :
cacls <INSTDIR> /T /E /G "NETWORK SERVICE":F
The first point has solved the issue for me.
Pierre

HTTP 401 error in CSADMIN for SAP content server on Linux OS and MaxDB

Hi,
We have installed content server on Linux OS.and DB as MaxDB.
I created the repository using OAC0. The with same tab I went to CSADMIN.
When I try to create repository with executing it , it ask for user name and password.
I mentioned the SAPCS admin user name and password, but i got HTTP 401 error. Unauthorized user.
Even i tried with prefixing domain name and with root user ID and password.
But got the same error. Please help
Regards,
Hemant

Hi
We are also facing the same problem. but as you mentioned in solution.
user: <domain>/<admin-user>
pw: pw
I am getting the same problem of Error 401. Kindly describe in detail with example.
Thanks
Regards,
R Karthikeyan

401 Authorization Required ERROR!!

Hi everyone, here is my problem. I cant change ANY setting for my linksys befsr41 v1 router. i can log in witht he password (admin), but when i try and change a setting (ie filters) a password prompt pops up , then after entering my password 3 time i get the "401 Authorization Required" error.
so far i have reset to factory defaults, changed my firmware, and tried changing the password, nothing has worked. i know its not a password issue. i have spent hours on this and got no where SOMEONE PLEASE HELP ME!!!!
-Matthew
Message Edited by SDMF on 07-10-2007 11:19 AM
(Mod Note: Edited due to non-compliance of forum guidelines.)
Message Edited by daikunzeon on 07-10-2007 11:31 AM

while the router is ON...press the reset button on the back of it for a whole minute.... while still pressing down, remove the power cable then release the reset button... clear your browser cache again then restart your computer... turn the router back ON again then access the router setup page once more..... you should leave username blank then use admin as your password.... remember your DSL/Cable configuration to get your Internet connection back ok?

HTTP 401 Authorization error in DMS KPro implementation

Similar Messages

Maybe you are looking for