SOAP Adapter - HTTP 401

Hi all,
i'm pretty new to SAP-PI and need some help.
We have following asynchronous scenario : XI-Adapter >>> XI >>> SOAP-Adapter to transfer data from ERP to a 3rd Party-System.
After some changes by the Web-Service-Provider ( certificate & user creditentials) we get a HTTP 401 - Unauthorized Error.
What we did:
imported the new certificate
set the new creditentials in the communication channel for authentification

Hi,
many thank for your quick responses!
Yesterday evening i decided to do a full cache refresh. Now i am receiving following error:
Error in call over HTTP: HTTP 0 null
[EXCEPTION]
java.io.Exception: Failed to get the input stream from socket: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by ChainVerifier...
After that i tried to set the parameter
     Module key: soap
     paramname: trustStore
     paramvalue: TrustedCAs
for the the module XISOAPAdapterBean in the CC, but i'm still receiving the same error.
So i think something is wrong with the new certificate. Our Basis-Team is checking this atm.
Regards
Kai

Similar Messages

SOAP Adapter - HTTPS w/ client authentication -SSL termination @ dispatcher

Hi,
We have a SOAP client sending SOAP message over SSL to PI. We are using client cert for authentication, but terminating SSL at web dispatcher. In this scenario, i) do we need to configure security for XISOAPADAPTER in Visual admin on PI and ii) do we need to set HTTPS with client authentication security option in SOAp Sender communication channel?
My understanding is that since we are terminatinating SSL at web dispatcher (Server authentication happens between third-party gateway and our gateway and when web dispatcher terminates SSL, client cert for auth is passed via httpheader to PI where it is mapped to UME user with sufficient authorizations) we don't need to set the XISOAPADAPTER security (if it is end-to-end ssl we would i guess set up in V. Admin>Security provider service>clientcertloginmodule for XISOAPADAPTER) and we don't need to set the sender channel as https with client authentication ( it should just be http in SOAP sender channel).
Is my understanding correct? I will really appreciate any clues?
Thanks,
Saurabh

Hi saurabh
follow these links to SAP note
these will be helpful for you
Note 856597 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 SOAP Adapter
https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=856597&_NLANG=E
Note 856599 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 Mail Adapter
https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=856599&_NLANG=E
Note 870845 - XI 3.0 SOAP adapter SSL client certificate problem
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=916664&nlang=EN&smpsrv=https%3a%2f%2fwebsmp102%2esap-ag%2ede
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=870845&nlang=EN&smpsrv=https%3a%2f%2fwebsmp102%2esap-ag%2ede
regards
Sandeep
If helpful kindly reward points

How to catch the sender SOAP adapter http response?

Hi eXperts,
I've a sender soap adapter opened to customer as webservice. When customers call this webservice, data is coming into XI and works fine. But the customer is complaining that the expected HTTP 200 response is not sent back to the calling SOAP client.
So my question is: Is there a way to catch the http 200 response from sender adapter, or at least get to know if the sender adapter has sent the response?
Thanks in advance.
Regards
Luis

Hi,
If I understood it correcly... Sender is a Async SOAP call and the sender system is expcting a status back of HTTP 200. Are you sure you had set the quality of effort to Exactly Once? If not please try setting it.
You can also go to Adapter monitoring or Communication channel monitoring in the Runtime workbench and see if the Sender SOAP adapter is fine.
http://help.sap.com/saphelp_nw04/helpdata/en/5e/164442c1a1c353e10000000a1550b0/content.htm
Thanks,
Prakash

Receiver SOAP Adapter (HTTP AXIS)

Hi Experts,
I need to use receiver soap adapter to communicate with a WebService, actually it is a AXIS service i can see when i give the soap url in web browser.
my question is for axis service, does it mean i have to use HTTP AXIS in the receiver channel to request the response for web service server? Can i use HTTP only without AXIS?
when i use SoapUI to test the webservice, it works fine. But when i use receiver soap adapter with HTTP (without AXIS), it is responding with the belwo error.
<sap:Error ...>
<sap:Category>Application</sap:Category>
<sap:Code area="UNKNOWN">APPLICATION_ERROR</sap:Code>
<sap:AdditionalText>Application Fault</sap:AdditionalText>
<sap:ApplicationFaultMessage namespace="http://sap.com/xi/XI/System/Axis/sample">host name</sap:ApplicationFaultMessage>
<sap:Stack/>
</sap:Error>
Experts, please help on this, the major question is HTTP AXIS is required when target web service is an AXIS service?
Thanks in advance.
Regards,

>>my question is for axis service, does it mean i have to use HTTP AXIS in the receiver channel to request the response for web service server? Can i use HTTP only without AXIS?
You are going to consume webservice. You can use standard SOAP adapter itself to consume the webservice that is built with axis framework.
Do you have some specific user authentication procedures like SAP Assertion Tickets, username token etc and some specific encapsulation formats (MIME, DIME, MTOM),WS Reliable Messaging and so then you need SOAP Axis adapter. If you need to consume webservice with standard transport protocol (HTTP or HTTPS) and client authentication etc , our standard SOAP adapter is more than enough.
Refer this link what axis soap adapter supports

Sender SOAP adapter error 401

Hello All,
Here the scenario is SOAP -> XI -> SAP ECC.
When the webservice is seding the message I am getting error in Sender SOAP channel.
Message is not going to Integration Engine.
Its failing with 401Un Authorized in sender soap adapter channel.My sender soap channel is plain channel with no authentication check and certificated etc.When webservice is seding request to XI its sending wit some usernmae which was there on XI box.I am facing this issue in Quality Env. The same is working fine in Dev box.
Please give me the list of points that I need to check here.
Thanks,
Regards,
Naresh

Hi,
I am facing this issue in Quality Env. The same is working fine in Dev box.
Once the scenario is transported from Dev to QA the location where the Webservice is hosted will also change
Hence you will have to change the target URL .....just the HostName / IP address and the port for all the webservices (that you transported to QA)
Once you are in QA and with no change to the URL the sender (which I suppose is also in QA env) will be still trying to ping the same old Dev-URL....in such situation the sender is bound to get UnAuthorized error....
So one in all change the URL in your WebService to point to QA and then test....
Same logic applicable to QA --> PROD
Regards,
Abhishek.

HTTPS sender soap adapter

Hi,
I want to use HTTPS port for one of our SOAP -->RFC sync interface .
currently we are using http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel this url and its working fine,
Here we want to use HTTPS ( HTTPS with client authentication as security level) ,but in our current PI system ( 7.31) is not enabled https/ports.
Please let me know how we can enable HTTPS port ,let me know the process.
once HTTPS port is enabled please let me know the process to use HTTPS with client authentication as security level)
Thanks
Surya

Hi Surya,
Base on your requirement ports like 433, 4022 etc as per availability to Trading partners.
Port mapping should be done in the firewall configuration as your web dispatcher port(This information can be obtained from your basis team / will be managed at the installation time / netweaver administration.)
80* series is for ABAP ports and 50* series i sfor JAVA port.
Also check the below link for more information.
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/09/20/sender-soap-adapter-https-with-client-authentication
Thanks and Regards,
Naveen

Using adapter specific message attributes in SOAP adapter configuration

Hi,
Can you please let me know how to use adapter specific message attributes in receiver and sender SOAP adapter configuration. If possible , with example.

See here:
Adapter-Specific Message Attributes in the Message Header
http://help.sap.com/saphelp_nw04/helpdata/en/43/0a7d1be4e622f3e10000000a1553f7/frameset.htm
Sender Soap Adapter:
http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/frameset.htm
Receiver Soap Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/29/5bd93f130f9215e10000000a155106/frameset.htm

SMIME in sender soap adapter

Hi,
I'd like to know the proper format of the POST request to a sender soap adapter with SMIME activated. I've found almost no documentation about it.
I'm trying to send a document ciphered to PI via soap adapter (HTTP POST). I've done the following steps
1. I activate SMIME in the sender soap adapter, and I specify "Decrypt" as the security procedure in the sender agreement. I also incorporate the private key in the keystore DEFAULT and reference to it in the sender agreement.
2. I use OpenSSL to cipher an xml document like this (I use the public certificate associated to the previous private key) :
--> openssl smime -encrypt -in fich.txt -out fich_encrypted.txt certTesting.pem
What I get is:
MIME-Version: 1.0
Content-Disposition: attachment; filename="smime.p7m"
Content-Type: application/x-pkcs7-mime; smime-type=enveloped-data; name="smime.p7m"
Content-Transfer-Encoding: base64
MIIC....[base64 content of the file encrypted]
3. I use CURL to send the HTTP POST request to PI. Previously I get the binary file from the base64 content.
> POST /XISOAPAdapter/MessageServlet?senderParty=&senderService=BC_1[...]
> Authorization: Basic c2U[...]
> Host: pi.[...].com:50000
> Accept: /
> Content-Type: application/pkcs7-mime; smime-type=enveloped-data; name=fich_encrypted.der
> User-Agent: Jakarta Commons-HttpClient/3.1
> Accept-Encoding: text/xml
> Content-Disposition: attachment; filename=fich_encrypted.der
> Content-Length: 620
> Expect: 100-continue
but I get this error from the SOAP Adapter:
--> java.io.IOException: invalid content type for SOAP: APPLICATION/PKCS7-MIME.
I also get the same error if I remove the header Content-Disposition.
4. If I send the xml file without ciphering (header Content-Type: text/xml;charset=UTF-8) I get the error:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: call failed: java.lang.SecurityException: Exception in Method: VerifySMIME.run(). LocalizedMessage: SecurityException in method: verifySMIME( MessageContext, CPALookupObject ). Message: IllegalArgumentException in method: verifyEnvelopedData( ISsfProfile ). Wrong Content-Type: text/xml;charset=UTF-8. *Expected Content-Type: application/pkcs7-mime or application/x-pkcs7-mime*. Please verify your configuration and partner agreement
PROBLEM --> I really don't know what the SOAP sender channel is expecting when SMIME is activated. I've tried to send the binary file encripted as an attachment and also directly, but the soap adapter complains.
Thanks

HI,
for XI EP
Please see the below links so that you can have clear Idea..
/people/saravanakumar.kuppusamy2/blog/2005/02/07/interfacing-to-xi-from-webdynpro
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/java/integrating%20web%20dynpro%20and%20sap%20xi%20using%20jaxb%20part%20ii.article
Consuming XI Web Services using Web Dynpro Part II-/people/riyaz.sayyad/blog/2006/05/08/consuming-xi-web-services-using-web-dynpro-150-part-ii
Consuming XI Web Services using Web Dynpro Part I -/people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
/people/sap.user72/blog/2005/09/15/creating-a-web-service-and-consuming-it-in-web-dynpro
/people/sap.user72/blog/2005/09/15/connecting-to-xi-server-from-web-dynpro
Regards
Chilla..

Using the Axis Framework in the SOAP Adapter

Hello experts,
I am currenty checking how I can easily manipulate sender and receiver details and how I could get attachments into XI.
I saw in the sap help that it is possible to use the AXIS framework from the SOAP adapter:
http://help.sap.com/saphelp_nw04/helpdata/en/45/a39e244b030063e10000000a11466f/frameset.htm
As usual, the documentation is of the same quality SAP usually provides.
So my first question would be: This is a moduke to be used from the SOAP adapter right? I am asking because they also wirte about the AXIS adapter and its metadata.
In oder to get it working, I created in the NWDStudio a library project, added my libraries (to the root directory) and deployed it via SDM. Deployment is succesful but its not working.
SAPHelp says I should check for a MessageServlet - I ask myself how that could appear suddenly just by packaging some axis libraries...?
I am using for that the ESA box (NW04s SP6) - I was not able to see whether there are some dependencies to the SP - are they?
Thanks for your support!
Helge

Helge,
Axis is outdated and has some issues ..use Apache Soap instead its much better and easy to use.
http://ws.apache.org/soap/
Regards
Ravi

SOAP -Client Certificate Authentication in Receiver SOAP Adapter

Dear All,
We are working on the below scenario
SAP R/3 System -> XI/PI -> Proxy -> Customer
In this, SAP R/3 System sends a IDOC and XI should give that XML Payload of IDOC to Customer.
Cusomer gave us the WSDL file and also a Certificate for authentication.
Mapping - we are using XSLT mapping to send that XML payload as we need to capture the whole XML payload of IDOC into 1 field at the target end ( This was given in the WSDL).
Now, how can we achieve this Client Certificate authentication in the SOAP Receiver Adapter when we have Proxy server in between PI/XI and Customer system.
Require your inputs on Client Certificate authentication and Proxy server configuration.
Regards,
Srini

Hi
Look this blog
How to use Client Authentication with SOAP Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/content.htm
Also refer to "SAP Security Guide XI" at service market place.
ABAP Proxy configuration
How do you activate ABAP Proxies?

Axis Framework in SOAP Adapter in PI 7.1

Hi Experts,
I am working on PI 7.1 . I just need to know all that I can about Axis Framework in SOAP Adapter
All inputs are welcome.
Many thanks,
Neha

Hi !
have a look on these links
Using the Axis Framework in the SOAP Adapter
http://help.sap.com/saphelp_NW04/helpdata/en/45/a4f8bbdfdc0d36e10000000a114a6b/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
Have a look at this Pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b092777b-ee47-2a10-17b3-c5f59380957f
Thanks !
Abhishek

Send and Receive an xml file over SOAP adapter

hi,
I want to send an xml file as an attachment over SOAP adapter and Response also should be file.
Can anybody tell the exact solution.
Useful responses will be appreciated
Thanks
Jaideep Jain

Hi Jaideep,
Yes you can send the any file throgh SOAP adapter by selecting the Keep Attachments option.
For your requirement you can go throgh the following link
Re: Attachments in SOAP adapter
http://www.w3.org/TR/SOAP-attachments
http://www.theserverside.com/tt/articles/article.tss?l=SendingAttachmentsWithSOAP
Regards
Sridhar Goli

SOAP Adapter And Protocol issue

Why and when we use SOAP adapter ? Does Xi uses processed XML messages using SOAP protocol ? I am new to Xi and confused over the issue. Can anyone please explain this to me. Thanks for your time.

HI KM
When you want to Send Data to XI from a Webservice and vice versa, your SOAP adapter is used.
Check these links for reference...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
A SOAP adapter is used in order to post messages to a webservice or provide a web service for receiving messages.
How ToUse the XI 3.0 SOAP Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
Please follow stefan's weblog
/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
SOAP adapters are used for communicating with the WEB SERVICE. Web service is a software system designed to support interoperable Machine-to-Machine interaction over a network. Web services are frequently just Web APIs that can be accessed over a network, such as the Internet, and executed on a remote system hosting the requested services. In common usage Web Service refers to clients and servers that communicate using XML messages that follow the SOAP standard. So we communicate the WEB SERVICE using the SOAP adapters.
This is an example WEB SERVICE which follows the SOAP standards
http://www.webservicex.com/CurrencyConvertor.asmx?op=ConversionRate
A scenario using SOAP adapter..
RFC -> XI -> WebService - A Complete Walkthrough (Part 1) by Shabarish Vijayakumar
RFC -> XI -> WebService - A Complete Walkthrough (Part 2) by Shabarish Vijayakumar
SOAP , we will use for Webservices.. for sender and receiver side..also
one example from Webbrowser to XI to receiver ...system
another example is we can send it to end point URL..
Webservice
http://help.sap.com/saphelp_nw04/helpdata/en/9b/dad1ae3908ee44a5caf57e10918be9/frameset.htm
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi - Invoke Webservices using SAPXI
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2131 [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/336365d3-0401-0010-9884-a651295aeaa9
Soap adapter?
Regards
Abhishek Agrahari

Soap Adapter will be stored?

hi..
How Soap Adapter will be stored?
bye.

Hi,
Chk these
For more details ref this SAP Note:
Note 856597 - FAQ: XI SOAP Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
rgds
Chemmanz

Real time scenario for AXIS framework in SOAP adapter

Hello,
Can anybody please suggest some real time scenario where AXIS framework can be used
and what are the advanteges and disadvantages of using AXIS framework
regards,
Loveena

Hi !
have a look on these links
Using the Axis Framework in the SOAP Adapter
http://help.sap.com/saphelp_NW04/helpdata/en/45/a4f8bbdfdc0d36e10000000a114a6b/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
Have a look at this Pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b092777b-ee47-2a10-17b3-c5f59380957f
Thanks !
Abhishek

SOAP Adapter - HTTP 401

Similar Messages

Maybe you are looking for