Http connection time out

Hi all,
in my application i send a request to a server and then wait for the response and once i get the response i process it. in a case where any exception occurs at the server side and i don't receive a response back, my application hangs at the
httpConnection.openInputStream();
i want to give a time out for the connection ie, if the application does not recieve any response within the specified time i want to close the connection. What can i do for that?
please help.

In the Connector's construction method there's a boolean value you can specify that you want the connection to have a timeout value for that connection. As far as I know, the actual timeout value is device dependent.

Similar Messages

What happend if we keep http connection time out as 0

what happend if we define http connection time out as 0 or less than 1 ..pls give reply.
i am seriously struck up with some problem
depending on this our enhancement is depended

Are you still facing the same issue ? This majorly relates to network problem or probably some issue on server end , have you tried to contact your host ?
Thanks,
Sanjit

HTTP and HTTPS connections time out--only one computer on the LAN has this problem. Also affects Internet Explorer

For the last few days HTTP and HTTPS connections on one computer on my LAN usually time out or fail to load completely. This also affects Internet Explorer on the same machine, but email, FTP, etc. seem to be working normally. The URLs that do not load in the browsers ping normally, and load normally on another machine on the same LAN. Running Firefox in Safe Mode does not help.

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls

Connection time out error in HTTP

Hey guys
i m getting connection time out error in a HTTP scenario,when i go in SXMB_ADM i dont find any entry with the name HTTP_TIMEOUT.
even in RZ10 i cant find the correct profile parameter.
i m taking help from michaels blog
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
i m on PI7.0 SP09
is there some other place i can find this entry? or do i need to ask the basis guys to add it?
thanx
ahmad

Also, there may be other factors to consider depending on your scenario. If you don't have it already, look at the latest <a href="http://service.sap.com/~sapidb/011000358700005909032005E/XI30XI70_TroubleGuide.pdf">XI Troubleshooting Guide</a> - Section 9.2 on "Timeouts in XI".
Regards,
Jin

Connection time out error in server proxy

Hi
My scenario is file to proxy. . It is synchronous scenario.
I am giving wait time as input and in the proxy i wrote a code to wait till the inputed value and after that send a response. it is working fine only if i give less than 60 sec.
If i specify above 60 sec i am getting the connection time out error in SXMB_MONI.
Please help me to solve this.
Regards
Divia

To increase Timeout use
Go to transaction SMICM........ Goto->services......choose HTTP.....edit this service.........increase maximum processing time and activate this service
look blog for timeouts:
The specified item was not found.

Connection time out

Hello everyone,
I'm using modem PK5000 from Century Link. My other two desktops are using Window and in the same room w my modem.
I got connection time out every time my computer started playing the screen saver.
All I have to do is restarting my modem but it's so unconvinience.
I called Century Link customer service and all they told me is changing the channel but it didn't solve the problem.
At school and other people's places, my wifi works just fine.
I used cleanmymac about a month ago and this problem started a week ago.
Can cleanmymac cause the problem? If so, how can I check and fix it?
I check the apple store to update my software but everything is up to date.
Can it be the firmware of my modem? My brother who uses the two desktops (and they connect to the modem with LAN cables) upgraded firmware last week and it seems like when the problem started.
And when my Mac loses the wifi signal, my printer still has the signal, but my desktop cannot log-in to page 192.168.0.1 which manages the modem and wifi even though the desktop connects w my modem by LAN cable and it still connects to the internet.
If you have any clue, please help!
Thank you so much!

Thanks Todd, Wayne,
this network timeout sure seems to be the guilty one!
I've changed it, lets see if it's fixed but sure looks like it.
The thing is that I was looking for GWWS tuning here :
http://edocs.bea.com/salt/docs20/ref/comref.html#wp1117652
but should have looked here
http://edocs.bea.com/salt/docs20/admin/config.html#wp1056667
Thanks,
Gary

Connection time-out issues each first try of pacman

Hi,
I am new to arch. I keep getting a connection time-out each time I use pacman for the first time. I have to do a ctrl+z to stop the command and then delete the db.lck file and then when I run pacman again, any operation on pacman that I had tried works flawlessly.
Do I need to do something to fix this? I check there was a similar thread in 2012, but it ended without any results.
Cheers,
Prashanth

geekoo wrote:@WonderWoofy: The second time on it works with the same mirrors. I am using the Indian http mirror at the top of the list. US mirror follows. When it fails, it takes a sweet 30 odd minutes to run through all of the mirrors and fails.
I'm pretty sure you can disable all the mirrors you don't want to use, try lowering the list to only those in Asia to minize your waiting time atleast. I get a time-out occasionally on the first run, but running anything inside China's GFW is a roll of the dice.

"connection time-out occurred" when my mac goes to sleep.

When My macbook goes to sleep I get a "connection time-out occurred" when I try to connect to the internet. and I have to restart my mac and restart the router. The is always a BT hotspot page displayed on the screen.
I have a 2011 macbook pro. This happens on my son's as well. he has the same model. he recently got a new retina display macbook and there hasn't been any problems. this doesn't happen on our phones either.
-Thanks for any help

I don't think the post can be edited after 10 or 15 minutes, what madking can do is ask host to remove it from this forum.
In addition to my own post, here are the correct link.
try to reset PRAM and SMC to refresh your macbook hardware behaviour:
http://docs.info.apple.com/article.html?artnum=2238\
http://docs.info.apple.com/article.html?artnum=303319
Good Luck

Connection time-out but then immediately after, no problem

For some reason, the first time I use pacman (after not having used it in a while), the connection times out, but when I Ctrl+C and then do the exact same thing, it starts working.
Any ideas why?
$ sudo pacman -S tmux
resolving dependencies...
looking for inter-conflicts...
Targets (2): libevent-2.0.19-1 tmux-1.6-2
Total Download Size: 0.44 MiB
Total Installed Size: 2.19 MiB
Proceed with installation? [Y/n]
:: Retrieving packages from core...
error: failed retrieving file 'libevent-2.0.19-1-i686.pkg.tar.xz' from ftp.lysator.liu.se : Connection time-out
^Cerror: failed retrieving file 'libevent-2.0.19-1-i686.pkg.tar.xz' from mirrors.ustc.edu.cn : Connection time-out
Interrupt signal received
$ sudo pacman -S tmux
resolving dependencies...
looking for inter-conflicts...
Targets (2): libevent-2.0.19-1 tmux-1.6-2
Total Download Size: 0.44 MiB
Total Installed Size: 2.19 MiB
Proceed with installation? [Y/n]
:: Retrieving packages from core...
libevent-2.0.19-1-i686 296.9 KiB 724K/s 00:00 [#####################] 100%
:: Retrieving packages from community...
tmux-1.6-2-i686 152.2 KiB 1801K/s 00:00 [#####################] 100%
(2/2) checking package integrity [#####################] 100%
(2/2) loading package files [#####################] 100%
(2/2) checking for file conflicts [#####################] 100%
(2/2) checking available disk space [#####################] 100%
(1/2) installing libevent [#####################] 100%
Optional dependencies for libevent
python2: to use event_rpcgen.py
(2/2) installing tmux [#####################] 100%
Last edited by damd (2012-08-13 11:20:38)

cfr wrote:Is this issue pacman-specific? Do you know that you definitely have a known-good connection when you're invoking pacman?
I'm using SSH to connect to the server where this problem is happening, indicating that the LAN connection works. Before invoking pacman I've tried pinging google.com, which works flawlessly.
The problem is still there, I just tried it.
EDIT: This actually happens with wget too:
$ wget https://aur.archlinux.org/packages/pa/p … ery.tar.gz
--2012-08-12 21:11:32-- https://aur.archlinux.org/packages/pa/p … ery.tar.gz
Resolving aur.archlinux.org... ^C (took a very long time)
$ wget https://aur.archlinux.org/packages/pa/p … ery.tar.gz
--2012-08-12 21:11:43-- https://aur.archlinux.org/packages/pa/p … ery.tar.gz
Resolving aur.archlinux.org... 208.92.232.29 (works here)
Last edited by damd (2012-08-12 19:12:35)

SOAP Adapter: Connection time out error

Hi Guys,
I do it one scenario for Proxy to webservice Asynchronous . I have send the input details through Proxy. In Sxmb_Moni shows success message. But Receiver side doesn't reach the payload. Because receiver side (Soap Adapter) shows connection time out error. But i have given correct URL and SOAP Action in receiver communication channel. Please give some suggestions to solve that issues. Please don't refer links.
Thanks & Regards
Vijay

hi
this is a time out error
increase the timeout value by specifying the parameter
XI.Timeout in the module parameter of soap Adapter
OR
1. This is because of TimeOut. The default timeout value for synchronous calls is 5
minutes. You can increase this value by setting parameter XI.Timeout in the module parameter table of
the SOAP adapter. The value must be given in milliseconds. For example, value 600000
represents the timeout value of 10 minutes. This parameter is not recognized in systems prior to SP13.
2.The Other Options is send the queue id with your request message.
http://host:port/XISOAPAdapter/MessageServlet?channel=p:s:c
&version=3.0&...&QueueId=xxxxxxxxxxxxxxxx
where xxxxxxxxxxxxxxxx is an ABAP queue ID.
3.Check your RWB message monitoring.
Is there any system failure message and holding message be there.
If then clear the messages.
4. Increase the time out parameter for HTTP in your altova xml spy.Defaultly it will be very low.

How to increase database connection time out?

Connection con = DriverManager.getConnection(.......
If we use this con object, let say, after 5 hours, then exception occurs because connection has been closed. So how can we increase its connection time out so that we can use the same connection, let say, after 2 days?

You don't want to keep a connection open for 2 days, use a connection pool.
http://jakarta.apache.org/commons/dbcp/

Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems.

Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems. Where can i download the ios5 from as my itunes is on my desktop which uses windows xp. Please help

Download iOS 5.1
iOS 5.1 (build 9B176) is compatible with iPad 1, iPad 2, iPhone 3GS, iPhone 4, iPhone 4S, iPod touch 3rd & 4th gen, and iPad 3. Additional builds are available for Apple TV 2 and Apple TV 3. The below download links are all direct downloads of iOS 5.1 from Apple.
iPad 1
iPad 2 Wi-Fi
iPad 2 GSM (AT&T)
iPad 2 CDMA (Verizon)
iPad 2,4
iPhone 3GS
iPhone 4 GSM (AT&T)
iPhone 4 CDMA (Verizon)
iPhone 4S
iPod touch 3G
iPod touch 4G
iPad 3 Wi-Fi
iPad 3 GSM
iPad 3 CDMA
Apple TV 2 (9B179b1)
Apple TV 3 (9B179b1)
Source: http://osxdaily.com/2012/03/07/ios-5-1-download/

How do you avoid Connection Time Out when using Migration Assistant

Connection Time Out occurred when trying to use Migration Assistant to Transfer filess from a Windows Computer to a new iMac. What do I do to avoid this?
I've connected the Windows computer to the iMac using an ethernet cable and both computers are on the same network. When I started the transfer, it said it was copying the first file on both machines but nothing was happening. Then finally it said there was a Connection Time out. Is there anything else I need to check?

I suspect it has something to do with your network settings on your PC. I'd recommend calling AppleCare right away. you have 90 days of free AppleCare telelphone support, they can help walk you through the process. Also if you haven't already i'd strongly recommend Pondini's guide to using Migration Assistant. You can locate it by clicking:
http://www.pondini.org/OSX/Setup.html

Cannot connect to WIFI - 'connection time out occured' but also says 'no ip address'

Hi,
I've searched the web and found endless issues with the wifi router / etc of the Imac Lion system. On the same wifi network we have a mac book (leopard I think), a pc laptop (which I am using now) and 2 phones + my brand new Imac with Lion osx. The first 4 items all connect with no problems.
I tried some of the sollutions here but it even made it worse as I now not have any connection at all!
http://support.apple.com/kb/HT4628
When I try to connect trhough systems preferences/network I get the message that my password is incorrect and that there is no IP address. Password is definitely correct. When I try to connect from the symbol in the right top corner - I get the message 'connection time out occured'
I am a bit of a Mac dummy ... any help is really appreciated.
Thanks
Billie

Hi BDAqua,
Thanks a lot for getting back to me.
Not so sure what your first questions means - or how to check this?
I tried joining other Wi-Fi network:
If I choose security 'WPA Personal' i get the message: connection time out
If I choose security 'WPA2 Personal' or 'WEP' i get the message@ no network found
hmmmm any suggestions? Thanks so much
Billie

[SOLVED] Pacstrap connection time-out

SOLUTION: Don't be a newbie like me and not know what DNS stands for. What I did to solve my problem was simply modify my /etc/resolv.conf to point to 8.8.8.8 instead of my default gateway.
G'day everyone, I apologize in advance for my lack of experience.
I understand this distribution is not for beginners, but I personally love steep learning curves as it provides the most enjoyable and interesting experience for me.
It's also the fastest way to learn.
Albeit, I have yet to even successfully install Arch!
I'm a little put off, but I've already deleted my Windows partition so now I am committed.
Anyways, so I've been following the absolutely wonderful Beginner's guide. But I seem to have made some huge mistake, or something is terribly wrong.
I'm only upto the part where it suggest typing "pacstrap /mnt base base-devel".
However when I put that command in, I am eventually returned with:
1 root@archiso ~ # pacstrap mnt base base-devel
==> Creating install root at /mnt
==> Installing packages to /mnt
warning: database file for 'core' does not exist
: : Synchronizing package databases...
error: failed retrieving file 'core.db' from mirror.aarnet.edu.au : Connection time-out
error: failed retrieving file 'core.db' from ftp.iinet.net.au : Connection time out
Etc etc. I tried using the original Mirrorlist and that gave me back 30 odd different server connection time outs. So I switched to just the Australian servers. It managed to download the 'extra' and 'community' packages when I swapped (they weren't downloading earlier either).
I've done a bit of searching (probably not enough) but I'm about to head off to sleep as it's almost midnight and I have work tomorrow. So I figured there's no harm in posting as that gives people many hours to respond. What I did find in my searching was that things like this occur when iPv6 is enabled. Unfortunately I don't have the luxury of restarting (or so I believe), because as you may have seen I'm actually trying to still install! So I'm a little stuck? Any help at all is appreciated, even if it's like
ArchLinuxPro wrote:Get out of here, you are too noob, go look at *insert easy way to learn Arch Linux here*.
Thanks,
Aaron.
Last edited by Ikbosh (2012-09-23 16:41:37)

ajaykumar wrote:
Hi lkbosh,
Ikbosh wrote:Although, I started Arch up into a VM environment and had no issues installing base and base-devel.
I think you can use those installed packages in order to install into your home computer. Please go through the following link
Custom Local Repository - Howto
I think it might help you in easy-install
With regards,
Ajay Kumar G
Unfortunately there's no way for me to connect to this VM remotely from home. Our work network is locked up pretty tight.
DSpider wrote:Or try the link above that: https://wiki.archlinux.org/index.php/Pa … _USB_stick
I'd do that, but I'm too far away from getting a running Arch linux inside my VM (Ended up having to do work most of the day ), let alone enough time to configure Guest Additions
plustwo wrote:
can you ping google.com?
you might also check your /etc/resolve.conf.
and are going through a proxy perhaps?
tnx
Prior to deleting
inet 192.168.2.232/24 brd 192.168.2.255 scope global eth0
I was able to ping google. My "/etc/resolve.conf" pointed to my router and there are definitely no proxies that I'm going through.
Off topic: Also, I just found out they are allowing pre-loading of Borderlands 2 D:
I think I might have to just grab another SSD from here at work and use that for Linux.
Because I deleted Windows 8 off my current SSD because it was being an arse and not letting CFDISK or Parted or GParted (Ubuntu Live) from seeing the partitions (I gave Arch ~10GB to mess with on the SSD and ~100GB on my HDD).
Last edited by Ikbosh (2012-09-18 08:57:12)

Http connection time out

Similar Messages

Maybe you are looking for