HTTP receiver Adapter configuration
Hi All,
I want to post an XML message using HTTP Receiver Adapter for my BPM scenario (Idoc to HTTP service)
The receiver has Oracle gateway and it expects message in following format.
HTTP Header
HttpVersion: HTTP/1.1
Authorization: Digest username=myusername,
realm=[email protected],
nonce=dcd98b7102dd2f0e8b11d0f600bfb0c093,
uri=/dir/index.html,
qop=auth,
nc=00000001,
cnonce=0a4f113b,
response=6629fae49393a05397450978507c4ef1,
opaque=5ccc069c403ebaf9f0171e9517f40e41
Contentlength: 12345
Contenttype: text/html
HTTP Body
TRANSPORT_PROTOCOL=OXTA
TRANSPORT_PROTOCOL_VERSION=1.0
REQUEST_TYPE=SEND
MESSAGE_ID=A1234567890ZZ0987654321
MESSAGE_TYPE=XML
MESSAGE_STANDARD=OAG
TRANSACTION_TYPE=PO
TRANSACTION_SUBTYPE=PROCESS
DOCUMENT_NUMBER=12345
PARTYID=9999
PARTY_SITE_ID=8888
PROTOCOL_TYPE=HTTPSOXTA
PROTOCOL_ADDRESS=HTTPS://www.me.com/servlets/oracle.ecx.oxta.
transportAgentServer
USERNAME=myusername
PASSWORD=myloginpassword
ATTRIBUTE1=
ATTRIBUTE2=
ATTRIBUTE3=
ATTRIBUTE4=
ATTRIBUTE5=
PAYLOAD=<xml ... ...>
I think this is not a typical HTTP URL type of format, is it?
And I am not sure how I can build the message. Where do I put the parameters like TRANSPORT_PROTOCOL, TRANSPORT_PROTOCOL_VERSION, REQUEST_TYPE etc in the HTTP adapter?
Also is there any place where I can see the final actual XI message that is sent to HTTP service?
Any help will be really appreciated.
Thanks and regards,
Rahul.
Hi Rajeev,
The receiver system should have the details about the content type it expects. I got that from the team who monitors our receiver system.
The HTTP Body of HTTP adapter is made up of PrologPayloadEpilog.
So I added the paramter list that receiver system expects as part of the Prolog. Refer to the HTTP body that I have posted in my earlier message. Out of that till ".....Payload=" is added to Prolog and XI then appends actual payload to it.
To be precise -
TRANSPORT_PROTOCOL=OXTA&TRANSPORT_PROTOCOL_VERSION=1.0&MESSAGE_TYPE=XML&MESSAGE_STANDARD=UNIVERSAL&TRANSACTION_TYPE=XXXE&TRANSACTION_SUBTYPE=ORDER_I&DOCUMENT_NUMBER=PO12345&PARTY_SITE_ID=ESAP_ORDER_I&USERNAME=***&PASSWORD=**&PAYLOAD=
So in the end it worked out well.
Cheers,
Rahul.
Similar Messages
-
HTTP receiver adapter: dynamic configuration
I was told that if I have a URL and some parameters, I can use a sync HTTP receiver adapter to call a site.
I know this can be done using some kind of dynamic configuration, but I am not familiar with this adapter.
The most important question here is that I need to know if this can be done throw PI, so my question is:
Is there a parameter limit in the HTTP adapter? If so, what is the quantity of parameters that I can give to the adapter?for the ASMA parameters you can use for the HTTP receiver adapter check
Configuring the Receiver Plain HTTP Adapter - http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/frameset.htm -
How to set HTTP header field "cookie" with http receiver adapter?
Hi,
I am using http receiver adapter (not axis) in a scenario. I could not set a parameter with key cookie in http header. Is there some kind of restriction to set it? I am able to set others like connection and create custom fields using ASMA and dynamic key configuration via UDF on mapping.
Could you please comment on, is cookie http parameter special or noneditable by PI's http adapter? I am looking for a solution without editing any abap code...
Regards,I believe it is possible since axis adapter provides very same functionality. Let me summarize my scenario may be it helps:
I am trying to call series of webservice lets say in a BPM. First service (login service) will provide me with a session id (in http header with key Set-Cookie) then I will call another service which has that session id in its http header with key cookie then I am going to logout. So I am testing the second part now, but it doest let me send cookie http header parameter.
I hope I clarified a bit more my problem.
Regards, -
Dynamic URL for HTTP receiver adapter
Hi all,
when the XI send the http request to the target system, the format maybe like this:
header + body the body is including: Prolog, payload and Epilog
here is about the target system have a 'input' parameter(maybe string type)
is it possible to pass the 'head + body' these value(or maybe the whole http request message) into input
i mean is it possible to set the dynamic URL for http receiver adapter like this:
http://host:port/path?input=<the header and body>
i have searched the blog Dynamic Configuration of Some Communication Channel Parameters using Message Mapping
Link:[/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping]
and the similar threads in the forum
please give me some advice
thanks in advanceWhen a HTTP server requests the whole message as URL parameters, then I assume that the server also requests an HTTP GET, which is not supported by XI.
Could you check this?
Regards
Stefan -
Adapter specific properties (http receiver adapter)
Hi,
does anybody know the technical name for the HTTP destination of a http receiver adapter.
The documentation lists only the names URLParamOne to URLParamSix and HeaderFieldOne to HeaderFieldSix.
Neither the technical name for URL nor for a HTTP destiantion are mentioned.
Regards,
MarcHello Moorthy,
I know this part of the documentation.
So I set the indicator within the communication channel.
Now, I have to fill the dynamic configuration during my mapping. My code looks like following:
DynamicConfigurationKey keyURL = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/HTTP", <b>XXXXX</b>);
// access dynamic configuration
DynamicConfiguration conf = (DynamicConfiguration) param.get (StreamTransformationConstants.DYNAMIC_CONFIGURATION);
// set value
conf.put(keyURL, url);
So what has to be filled instead of XXXXX ?
Regards,
Marc -
HTTP Sender and HTTP Receiver adapter. Pls advice urgent
Hi All,
There is one Third Party that wants to send XML data and receive XML data with XI.
Please let me know can I use HTTP for that.
How to use HTTP Sender part?
How to use HTTP Receiver Adapter?
Pls send blogs/doc for that
Thanks and Regardshi.,
Check this thread for the code for a HTTP Client,
/message/266750#266750 [original link is broken]
Also, check these blogs. They use HTTP adapters for their configuration,
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
Check these links for the configuration part.
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
Weblog :
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - although this weblog is
aimed at explaining the sync-async bridge.. Sriram has taken http-to-file scenario as the example
note:reward points if solution found helpfull.....
regards
chandrakanth.k -
How to trace HTTP receiver adapter error
Hi All,
My scenario is to send PO details to vendor site (HTTPS URL). MY SSL configuration is complete and I have used the SSL certificates in RFC destination of type 'G'. When I test RFC destination connection, it gives me the correct response as '200'.
This RFC destination is used in HTTP receiver adapter of XI to connect to site and post PO xml document. It is passing successfully through Integration Server, as I get success flag in 'SXMB_MONI'. But, it is not reaching our vendor's site.
Can someone help me, with what's going wrong, or how can I trace the error.
Thanks & Regards,
AmitHi Sadhna,
It's a B2B scenario, where my sender is configured correctly and the receiver as well.
In sxmb_moni, I am getting successfull status. But, it is not reaching receiver.
Thanks & Regards,
Amit -
HTTP Receiver adapter with post
Hello,
I have following scenario.
XI (http receiver adapater) -
> 3rd party web based application.
The 3rd party application expects XI payload to be part of URL with POST Method.
When HTTP receiver adapter sends request to 3rd party application, the URL looks like as follows.
http://myserver:6789/myapplication/name1=value1&name2=value2&.....&name27=value27
I looked at HTTP receiver adpater document on SDN. I see some attributes such as headerfiled1, headerfiled2..... headerfield6 and urlfield1....urlfield6. I have about over 25 fields to be passed with URL.
Now I have following questions.
1. How to make XI payload as name value pairs and part of URL.?
2. I think the default for http adapater is GET, How to configure http adaper to use POST?
I appreciate your help.
Thank you,
Balaji> 1. How to make XI payload as name value pairs and part of URL.?
You should create the whole URL in a user defined function in mapping.
> 2. I think the default for http adapater is GET, How to configure http adaper to use POST?
HTTP adapter (and SOAP adapter) use HTTP POST. GET is not supported.
Regards
Stefan -
Code 110 Reason Error in HTTP Receiver adapter
Hello
I am having proxy to HTTP Receiver scenario in which i am calling the target application URL through HTTP Receiver Adapter. This interface is async interface and hence i am not expecting any response from the target system.
When i execute my interface the target system receives data from XI but in SXMB_MONI it sets the status of the message as "<b>Automatic Restart</b>" with the error description as "<b>HTTP client. Code 110 reason</b>" in HTML Code area <b><SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code></b>
This is causing multiple messages stuck in the queue and presently i am manually clearing all the messages.
i checked the quality of service of the incoming message which is correctly setted as <b>Exactly Once</b>.
Is there any configuration missing?
Thanks in advance.
Regards
RajeevHi Rajeev,
1.)Check in SMICM if your HTTP service is running or not.
2.)If its running fine then you can check whether your SSL certificate is configured properly or not.
Also follow the below mentioned links :
HTTP 110
HTTP Receiver Adapter -> HTTP client code 110 reason error when sending
*Pls reward with points if helpful*
Regards,
Shibani -
when i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"
Hi, Michal
I have read your Weblog. It makes sense to me. Thanks a lot for your help! However, I still have some questions and listed them as following. Could you please help to answer them?
<b>Q1:</b> I am new to SAP-XI. So I have no idea about TCODE-SXMB_ADM. Could you introduce more details about it?
<b>Q2:</b> The XI system I am using is running on SAP-ICC's machine. The tools I can use are:
<b>1.</b>Builder for Integration Repository
<b>2.</b>Builder for Integration Configuration
<b>3.</b>System Landscape Directory
<b>4.</b>Runtime Workbench
<b>5.</b>Administration System (for Repository, Directory, Runtime)
Please note that I do not have a complete control on this SAP-XI. Do you think whether or not I can set the timeout parameter by following the instructions provided in your Weblog?
For more details about my SAP-XI, please access the following Web page:
http://iccxi.sap.com:58000/rep/support/admin/index.html
<b>Q3:</b> The following messages are extracted from the SAP-XI. Wish they are hepful to solving my problem.
2006-06-19 05:12:16 Success The message was successfully received by the messaging system. Profile: XI URL: http://iccxi.sap.com:58000/MessagingSystem/receive/AFW/XI
2006-06-19 05:12:16 Success Using connection AFW. Trying to put the message into the request queue.
2006-06-19 05:12:16 Success Message successfully put into the queue.
2006-06-19 05:12:16 Success The message was successfully retrieved from the request queue.
2006-06-19 05:12:16 Success The message status set to DLNG.
2006-06-19 05:12:16 Success Delivering to channel: ValidationRequestHandlerServiceChannel
2006-06-19 05:12:16 Success SOAP: request message entering the adapter
2006-06-19 05:12:37 Success SOAP: call failed
2006-06-19 05:12:37 Error SOAP: error occured: java.net.ConnectException: Connection timed out: connect
2006-06-19 05:12:37 Error Exception caught by adapter framework: Connection timed out: connect
Thanks
Menghua Li -
Parameter in HTTP receiver adapter
Hey
My requirements are:
I am sending an XML to an external system. Documentation says: "XML should be in a parameter in your request called 'xmlInput'".
How do I actually put my XML in this parameter? Does this have anything to do with the URL Parameters in comm channel configuration?
I have configured a client proxy, http receiver adapter and a communication channel in sm59 and they work OK, but it seems as I don't send the XML in this parameter.
Appreciate your help!
regards OleHey!
Thanks for your answers.
Nana, are you sure of this, that java proxy is the only way I can put the XML in a parameter? I only need to confirm this because there is no place in their documentation that this is stated explicitly, I have only been told this via their technical person...:)
I agree that this is a limitation of the receiving system, and I know that this system is not up to date as I can tell from what they are saying and their documentation.
regards Ole -
Paramter setting in URL in the case of HTTP receiver adapter
I have the following requirment: Can you anyone please help me how to define DATATYPE and configure in HTTP adapter:
The web page is developed in JSP page its body contains parameter(for example:<textarea name="xml" cols="70" rows="150" wrap="off">) to pass to the URL.
In this suitation,1) how can define my datatype in XI repository. ,Root element should be start with "xml" tag? 2). what are configuration parameters in HTTP receiver adapter.
3). Using HTTP post application.
Your response is highly appreciated.
Thanks
VenkatI have the following requirment: Can you anyone please help me how to define DATATYPE and configure in HTTP adapter:
The web page is developed in JSP page its body contains parameter(for example:<textarea name="xml" cols="70" rows="150" wrap="off">) to pass to the URL.
In this suitation,1) how can define my datatype in XI repository. ,Root element should be start with "xml" tag? 2). what are configuration parameters in HTTP receiver adapter.
3). Using HTTP post application.
Your response is highly appreciated.
Thanks
Venkat -
HTTPS communication using HTTP receiver adapter URL address as Address Type
Hi All,
If some one who has tried HTTPS communication using HTTP receiver adapter using URL address as Address type can you please guide me what are the steps need to be done.
Note : Address type is a parameter in HTTP adapter setup .
Regards,
ReddyHi,
Check this,
Configurations in Integration Directory
The plain HTTP adapter gives the receiver system the following specifications:
— Specifications for addressing using a URL address:
Target host, service number, and path prefix including query string:
http://<hostname:port>/<path>?<query-string>
You can identify the target host (HTTP port) of a SAP Web Application Server using
the
ICM monitor
Host and port of the HTTP proxy (optional if there is a firewall between the plain
HTTP adapter and the receiver system)
Authentication data for the receiver system.
See also: transaction Display and Maintain RFC Destinations (SM59).
— Specifications for addressing using an HTTP destination:
HTTP destination
— Parameters from the communication channel for technical routing
Content type (the entry text/XML is expected as default)
Specifies the format that the message contents (the payload) should have.
Optional header fields for the receiver-specific protocol
Attributes for the query string
1. Sender party
2. Sender service
3. Receiver Interface
4. Message ID
5. Quality of service
6. Queue ID
All attributes are selected except for the queue ID. If you do not want a value to be
transferred to the receiver, deselect it. The queue ID is only required if the quality of
service is EOIO.
Specifications for payload manipulation
XML code (default UFT-8)
Specifies the character set.
URL escaping
Presents the XML in a URL-enabled format. Special characters that could be
interpreted as control characters are replaced with escape characters (masked).
Prolog
Enhances the payload for particular servers (optional, see below).
Epilog
Enhances the payload for particular servers (optional, see below).
Enhancing the Payload
Regards
Seshagiri -
Synchronous HTTP Receiver adapter
Hi,
I am configuring Synch HTTP receiver adapter. I have created synch message and did message mapping, etc. I am getting some message back from the receiving system but it doesn't have header info like namespace, service, interface name. Hence it fails in response mapping. How do I solve this? Does the receiving application have to send me this info?
thanks,
KPHi,
I presume that the Response message type and the Receiving message types have the header structure defined in it. If this is not the case, you need to add the header info to the Response message type.
If it already has, then:
A) You can either create the relevant mapping between the Response message type and the Receiving message types. Here, you can fill in the constant values, as you know the most of the relevant header info.
B) If this is not the case, the receiving application has to fill in this header info in the Receiving message type.
Hope this helps,
Bhanu -
HTTP Receiver adpater configuration for Web Application server
Hello All,
I am trying to configure a HTTP scenario. I want to configue the receiver HTTP channel to connect to the WebApplication server installed locally.
I am able connect to the WebApplication server from by browser by giving the URL http://inld50037931a.dhcp.blrl.sap.corp:8080/hello/.
In my receiver HTTP channel i have configure as below
Target Host : inld50037931a.dhcp.blrl.sap.corp
Service Number : 8080
Path : /hello.
But it is failing in run time with error in SXMB_MONI : HTTP-Server Code 500 Reason Internal Server Error Explanation Unknown Host.
And i checked the Trace and it is looking for taget URL :
http://inld50037931a:8080/hello
instead of
http://inld50037931a.dhcp.blrl.sap.corp:8080/hello
Kindly help me in correcting the receiver channel configuraion.
Best Regards,
BiswaHi Babu,
The given links might help you:
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
HTTP Receiver Adapter
Regards,
Ajay.
Maybe you are looking for
-
Uploading updated file to live server
Hi there, DW 8.0.2 Develop Local sites on C:\sites\all-my-sites Test on C:\Inetpub\wwwroot\all-my-sites Ever since I have been using DW (4 years now), I have tried to remember what files I changed and updated them to the live server with FTP. Sometim
-
I have tried to make my Microsoft Office for MAC's OUTLOOK program work as the default email system. But ATT/Yahoo says its service is not compatible with the MAC version of Microsoft Outlook... Has anyone been able to make it work? I can't change
-
The desktop software is not registering or recognizing my organizer sync settings. Each time I make my selections, the software confirms that I have sucessfully confirgured the product. When I select "Finish", the settings do not seem to be saved a
-
I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost? I dont have the previous product key.
-
Unable to download adobe reader in windows vista
I am unable to download adobe reader in windows vista.... upon going to download help, it just hangs looking for files to fix the issue