HTTP request failed. Error code: "500". Error message
Hi ,
When we are trying to test webservices (exposed webservice in PI) scenarios in PI box we are getting error related Adapter framework service
HTTP request failed. Error code: "500". Error message: "Internal Server Error [http://xxxx:xxxx/AdapterFramework/rtc]"
in the RWB it is showing that
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIAdapterFramework:GENERAL:com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message 01d76ce0-972e-11e0-c652-b25394b91e0c(INBOUND) expired
Can any body help .
Edited by: subhaniABAP on Jun 15, 2011 11:30 AM
Hi,
If you want to resolve this error when dealing with the messages, please try the cache refresh with the link:
http://host:j2eeport/CPACache/refresh?mode=full
And also go thorugh:
- In Integration Repository/Directory go to menu Environment ->
Clear SLD Data Cache
- In R/3 go to transaction SXI_CACHE -> menu XI Runtime Cache -> Start
Complete Cache Refresh
MESSAGE EXPIRED:
Increase the value of the timeout parameter 'xiadapter.inbound.timeout.default' under Services -> 'XPI Adapter:XI'
to a higher value say '600000'.
Regards,
Caio Cagnani
Similar Messages
-
Hi,
Developed Proxy <-->PI<-->JDBC SELECT scenario and getting the following error.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_SEND_FAILED</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while sending by HTTP (error code: 500, error text: Internal Server Error) (See attachment HTMLError for details)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
When I cross checked the JDBC Receiver communication channel in Runtime Work Bench
request and response were successfull. RWB shows the following message.
2009-06-12 09:34:50 Information The message was successfully received by the messaging system.
2009-06-12 09:34:50 Information Message successfully put into the queue.
2009-06-12 09:34:50 Information The message was successfully retrieved from the request queue.
2009-06-12 09:34:50 Information The message status was set to DLNG.
2009-06-12 09:34:50 Information Delivering to channel: DB2ReceiverTableSPT
2009-06-12 09:34:50 Information JDBC Adapter Receiver processing started, required QoS BestEffort
2009-06-12 09:34:50 Information JDBC Adapter Receiver Channel DB2ReceiverTableSPT:
2009-06-12 09:36:35 Information Database request processed successfully.
2009-06-12 09:36:35 Information The message was successfully delivered to the application using connection JDBC_http://sap.com/xi/XI/System.
2009-06-12 09:36:35 Information The message status was set to DLVD.
I had gone thru all the previous threads related to 'CLIENT_SEND_FAILED' but
those did not solve my problem.
Can some one help me to solve this issue.
Thanks,
Vijay.I made necessary changes as per the blog. Appended '_response' for JDBC response structure.
Still I am facing same problem.
Strange....delibarately gave the link so that you can cross-check the JDBC config on receiver side...I assume that the proxy is configured properly with the Sync communication....also mapping is done accordingly...
Regards,
Abhishek. -
HTTP request failed :Error code 500 internal server error
In PI 7.0 system we are getting http error for rwb and exchage profile portal function
Detail:
HTTP request failed : Errro code 500 internal server error
( http://hostname:50000/adapterframework/rtc)
If I do a connection test for ping(sap >bc >ping) from SICF, I am getting HTTP error.
Please help me out to resolve this problem.
I would be thankful for your suggestionfrom SM59 I tested the connection of INTEGRATION_DIRECTORY_HMI(HTTP connection to ABAP system)
detail:
staus HTTP response 500
status text : internal server server
duration test call 17173 ms
Please help me out to resolve this issue -
Handler for http error code 500 is outside of app server
Hello,
I am wondering if it is possible to redirect to a error page outside of app server in web.xml, this is required by our customer. For example:
<error-page>
<error-code> 500</error-code>
<location>http://my-different-appserver/errorpage.jsp</location>
</error-page>
Thanks a lot,Hello,
I am wondering if it is possible to redirect to a
error page outside of app server in web.xml, this is
required by our customer. For example:In about 30 secs of googling I found this modification to an htaccess file.
.htaccess
ErrorDocument 500 /error-docs/500.shtmlWhy do continue to post such questions when they can be answered with 10 s of work. -
Failed to Open FR report With Error code 500 - 'unable to process request'
I am running a load test against PBCS service. The service is load-balanced with 2 managed servers : EPMServer0 and EPMServer1
When I put the loads with 60 VUs -- all visiting FR reports, the service runs without error. But when the VU# increased to 90, it began to respond with Error code 500 - 'unable to process request'.
I tried to correlate the FRLogging logs to the errors, and found during the time those error happens, there are logs like this:
>>>>>>>>>>>>>>>>>>>>>>>>>>
[2013-09-27T05:21:29.325+00:00] [EPMServer0] [WARNING] [00365] [oracle.EPMFR.core] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: sysname50134114.PerfUser0439] [ecid: 004tpQ^VFHT7m3RLIYDCif0007a30002bD,0:2:1:1] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_CLASS: com.hyperion.reporting.connection.UserConnection] [SRC_METHOD: openConnection] User authentication information is invalid. Unable to connect to datasource.[[
com.hyperion.reporting.util.HyperionReportException: Error connecting to database connection Vision:Plan1: Failed to sync with user provisioning.com.hyperion.planning.HspRuntimeException
at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
at com.hyperion.reporting.connection.UserConnection.<init>(Unknown Source)
at com.hyperion.reporting.connection.ConnectionManager.getConnection(Unknown Source)
at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
at com.hyperion.reporting.webviewer.WebDynamicReport.validateDatasources(Unknown Source)
at jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrhtmlreport._jspService(__hrhtmlreport.java:1999)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.hyperion.reporting.webviewer.HRSecurePagesFilter.needAuthentication(Unknown Source)
at com.hyperion.reporting.webviewer.HRSecurePagesFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.hyperion.reporting.webviewer.FRClusterHelper.doFilter(Unknown Source)
>>>>>>>>>>>>>>>>>>>>>>>>>
It looks like the servlet failed to open the datasource connection while handling the FR requests. But there are several data sources. My questions are:
1) Which datasource is corresponding to the issue? Is it EPMSystemRegistry?
2) What is the recommended configuration for the connection pool max capacity setting? -- current setting for EPMSystemRegistry is 30
3) Whether it could be a connection leak problem as only 90 concurrent end user is visiting and it failed to connect?
Thanks,
Ellick Lu
Type
JNDI Name
Targets
aif_datasource
Generic
jdbc/aif_datasource
EPMServer
calc_datasource
Generic
jdbc/calc_datasource
EPMServer
EPMSystemRegistry
Generic
jdbc/EPMSystemRegistry
EPMServer
odiMasterRepository
Generic
jdbc/odiMasterRepository
EPMServer
planning_datasource
Generic
jdbc/planning_datasource
EPMServer
raframework_datasource
Generic
jdbc/raframework_datasource
EPMServerIt is checking for Database connection in Workspace. Check Editing Database Connections
Can those users login to Planning? Do they have correct security setup (I guess not)
Regards
Celvin
http://www.orahyplabs.com -
Dear Experts,,
We have MDM and PI in our landscape. We are using MDM Adapter for the integration between the two.
When we try to run the T Code SXMB_IFR, we are getting HTTP request failed error. i.e., “Error Code: 503 -- Service Unavailable”. And also the RWB communication channel is not working because of this error and we are unable to refresh the cache too because of this error.
We have checked from MDM side, and messages are flowing from ready folder but not coming into PI. We had monitored the messages using
SXMB_MONI.
We have restarted the Java Server but it’s taking too much time to restart around 12 to 15 hours & we checked after that but still facing the same issue.
Could you please help me to figure out this issue.
Thank you for your support in advance.
Thanks and Regards,
Priti.Hi Priti,
You can check the suggestion of Jyothi Anagani
Because of J2EE application com.sap.aii.af.ms.app not active
The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
Runtime Workbench "503 Service Unavailable" Error After JSPM SP Update
Regards,
Nabendu. -
Received HTTP response code 500 : Error during conversion of XI message
hi
Facing the error , "Received HTTP response code 500 : Error during conversion of XI message"
This is the fist time i am configuring the sender soap ( Axis Framework in the SOAP Adapter) (Quality of service Best effort) communication channel and i am getting the above error did any body face this error.
01.09.2011 12:02:32 Information The message status was set to DLNG.
01.09.2011 12:02:32 Error SOAPFault received from Integration Server. ErrorCode/Category: XIServer/ATTRIBUTE_INITIAL; Params: Manifest cid:6D90482BF678436D75928FC8B9930519; AdditionalText: null; ApplicationFaultMessage: null; ErrorStack: Attribute Manifest cid:6D90482BF678436D75928FC8B9930519 is initial
01.09.2011 12:02:32 Error Transmitting the message using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Error during conversion of XI message.
regards
sandeep
Edited by: pendyalas on Sep 1, 2011 12:20 PMI found a link with respect to similar error , sap note 1522630 has been used to resolve this error.
i will try and see if it works.
AXIS Sender Adapter Failure after upgrade to PI 7.11 SP06
regards
sandeep -
HTTP response code 500 : Error during Sender Agreement Determination
I am trying a simple file to file scenario and messages are not being received in Integration Server.
Through communication channel monitoring, i have received the below error message.
Error Transmitting the message to
endpoint http://<hostname>:50000/sap/xi/engine?type=entry using
connection File_http://sap.com/xi/XI/System failed, due
to:
com.sap.engine.interfaces.messaging.api.exception.MessagingException:
Received HTTP response code 500 : Error during Sender
Agreement Determination.
Can you please help
Regards
HarishHi Harish,
http://<hostname>:50000/sap/xi/engine?type=entry
it should be http://<hostname>:8000/sap/xi/engine?type=entry not 50000 as port It should be your HTTP port...please .make the changes !!
In SXMB_ADM transaction under Integration engine configuration please change the settings to http://<hostname>:8000/sap/xi/engine?type=entry
make sure with your basis team that ur http port is 8000 or 8001 ..as per that make the necessary changes..
Regards, -
HTTP response code 500 : Error during parsing of SOAP header
Hi Experts,
I have a MAIL to IDOC scenario. An external third party emails invoices to our inbox - which we pick up and process the attachment. All is well when I test the scenario internally, but when the third party emails it fails with (see ERROR MESSAGE below).
When I look at the SOAP header of the failed message I see the values from the dump in this field:
<sap:Record namespace="http://sap.com/xi/XI/System/Mail" name="SHeaderTHREAD-INDEX">AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1pEZAF500SsAYW46lgBgX2bGALyieMQAXw2oKgBYXf0WAGeueD0AAAHnhwBamTSaAGIUE0kAYZSYTQBgY5OTADunN0gAE3t/sQAWScBXADTQvvEAD4yNhQATdkKiAFr7DBMAGIXTZQAP2xJFABZ0YfoAGHYAuAAKlaeaACJ9xtUAEjcvQAAV4L06ABZuwsAAK/f9vgAAF/GSAAAYmRYARIKwtQAV5R9SABMo5bsAGQQyvAAVqsjyABOh9uMAFXTa2QAWEjsfABaEvp4AFaL1NQAV5MnUABXiVbIAGc7LsQAYVN9SABLfYQIAEwF3nQAWSL2lABn5ZgIAEf/k8gAWeVgrAAJaSZIAAElM4gATZR0GA=</sap:Record>
Can anyone tell me what SHeaderTHREAD-INDEX does? Or what my problem is (Our email is Outlook)
ERROR MESSAGE.........
SOAPFault received from Integration Server. ErrorCode/Category: XIProtocol/WRONG_VALUE; Params: SOAP:Envelope(1)SOAP:Header(1)sap:DynamicConfiguration(3)sap:Record(14), AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1pEZAF500SsAYW46lgBgX2bGALyieMQAXw2oKgBYXf0WAGeueD0AAAHnhwBamTSaAGIUE0kAYZSYTQBgY5OTADunN0gAE3t/sQAWScBXADTQvvEAD4yNhQATdkKiAFr7DBMAGIXTZQAP2xJFABZ0YfoAGHYAuAAKlaeaACJ9xtUAEjcvQAAV4L06ABZuwsAAK/f9vgAAF/GSAAAYmRYARIKwtQAV5R9SABMo5bsAGQQyvAAVqsjyABOh9uMAFXTa2QAWEjsfABaEvp4AFaL1NQAV5MnUABXiVbIAGc7LsQAYVN9SABLfYQIAEwF3nQAWSL2lABn5ZgIAEf/k8gAWeVgrAAJaSZIAAElM4gATZR0GA=協彎䅍䔾ਉ़䥎噏䥃䕟乏㸸㌱ㄵㄹ㰯䥎噏䥃䕟乏㸊उ㱁䵏啎呟䕘䍌彖䅔㸷⸵〼⽁䵏啎呟䕘䍌彖䅔㸊उ㱃啒剅乃失㹅啒㰯䍕剒䕎䍙ㄾਉ़䅍何乔彖䅔㸱⸴㜼⽁ꯃ䅢坡汫, ST: ST_XM; AdditionalText: An error occurred when deserializing in the simple transformation program ST_XMS_MSGHDR30_DYNAMIC; ApplicationFaultMessage: ; ErrorStack: XML tag SOAP:Envelope(1)SOAP:Header(1)sap:DynamicConfiguration(3)sap:Record(14) (or one of the attributes) has the incorrect value AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1pEZAF500SsAYW46lgBgX2bGALyieMQAXw2oKgBYXf0WAGeueD0AAAHnhwBamTSaAGIUE0kAYZSYTQBgY5OTADunN0gAE3t/sQAWScBXADTQvvEAD4yNhQATdkKiAFr7DBMAGIXTZQAP2xJFABZ0YfoAGHYAuAAKlaeaACJ9xtUAEjcvQ An error occurred when deserializing in the simple transformation program ST_XMS_MSGHDR30_DYNAMIC Data loss occurred when converting AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1p
Transmitting the message to endpoint http://sdcxp1-ci.na.fmo.com:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 500 : Error during parsing of SOAP header.We work with Microsoft Outlook, but I'm sure this could work with any email system.
This error only came from external emails - what we did in the end is to get the third party to email a particular email (email1) in our company. This is set up as a regular email account. On this email put a forward rule to email2 for a particular sender/subject. email2 is set up as POP3 so that XD1 can poll it - we also block any emails except from email1.
Doing this accomplishes a couple of things:
1) We get around the error because XI polls email2 (which has adapter settings of IMAP4 so we can see MAIL adapter attributes ie. sender, subject etc...When we originally had as POP3 we were not able to see these - but setting as IMAP4 causes the error for external emailers)
2) We have a SPAM filter - the XI email is clean from SPAM and the adapter will not have errors, as it only receives valid emails to process
3) We have a central email (email1) which is used to archive all XI emails - we use this for all email scenarios (as we also save to folder and forward in the rule)
Hope this helps your situation. -
Received return code 500 ( Error during conversion of XI message )
Hello Experts,
I am configuring the WSRM for SD in SAP. I have only configured services CreditWorthinessQuery_Out and CreditWorthinessQuery_In on soamanager to carry out credit checks.
while i am creating sales order i am getting below error.
Received return code 500 ( Error during conversion of XI message )
In debug i checked the string of error it showed me below string :
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">#<SOAP:Hea
der>#</SOAP:Header>#<SOAP:Body>#<SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.o
rg/soap/envelope/"><faultcode>SOAP:Client</faultcode><faultstring>Error during c
onversion of XI message</faultstring><faultactor>http://sap.com/xi/XI/Message/30
</faultactor><detail><SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.co
m/xi/XI/Message/30"><SAP:Category>XIProtocol</SAP:Category><SAP:Code area="PARSE
R">UNEXPECTED_VALUE</SAP:Code><SAP:P1>Main/@versionMajor</SAP:P1><SAP:P2>000</SA
P:P2><SAP:P3>003</SAP:P3><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMess
age namespace=""/><SAP:Stack>XML tag Main/@versionMajor has incorrect value 000;
expected value is 003##</SAP:Stack></SAP:Error></detail></SOAP:Fault>#</SOAP:Bo
dy>#</SOAP:Envelope>#
Does anyone have any idea about this? I am not integrating with PI/XI system.Hi
Can you check this out?
Transaction SXMB_ADM Integration Engine Configuration
For an application system you have to maintain the role of the business system as an application system. Set the corresponding Integration Server as an HTTP destination (for example, dest://INTEGRATION_SERVER). Create the destination in transaction SM59 and set the type to HTTP Connections to R/3 System. Test the connection by using the Connection Test button; you should get HTTP 500 u2013 Empty HTTP Request received, because no u201Ereal‟ XML document is sent during this test.
A HTTP return code 500 (Internal Server Error) is OK.
Regards
Pothana -
Dear All,
I am using Tomcat 4 and J2SE 1.4.2 and winXp. I am try to write a simple server/client program using servlet to connect them.
I am using URLConnection in client side to connect server. However, when i try to get the input/output stream from URLCOnnection object, Error Occur
java.IO.Exception: server response return code: 500 for URL http://localhost:8080/examples/servlet/CPServlet
I dunno why it happens, Can you tell the reason or simply tell me the solution.
Below is my code
// Client
import java.net.URL;
import java.net.URLConnection;
import java.io.*;
public class Customer
ObjectInputStream oin = null;
ObjectOutputStream oout = null;
URLConnection conn = null;
public Customer()
try
URL url = new URL("http://localhost:8080/examples/servlet/CPServlet");
conn = url.openConnection();
conn.setDoOutput(true);
conn.setDoInput(true);
conn.setUseCaches(false);
conn.setRequestProperty("Content-type","application/x-java-serialized-object");
conn.connect();
oin = new ObjectInputStream(conn.getInputStream());
//oout = new ObjectOutputStream(conn.getOutputStream());
System.out.println("Connected");
catch (Exception e)
e.printStackTrace();
System.exit(1);
public static void main(String[] args)
Customer cust = new Customer();
try
//Message msg = cust.receiveContent();
//System.out.println("Received " + msg.getInt());
catch (Exception e)
e.printStackTrace();
System.exit(1);
public Message receiveContent()
Message msg = (Message)MyUtil.getObjectThrSocket(oin);
System.out.println("Successfully receive content from Server");
return msg;
// Server
import java.io.*;
import javax.servlet.http.*;
import javax.servlet.*;
public class CPServlet extends HttpServlet {
// field
ObjectOutputStream oout = null;
ObjectInputStream oin = null;
public void doGet (HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException
System.out.println(request.getMethod());
response.setContentType("application/x-java-serialized-object");
oout = new ObjectOutputStream(response.getOutputStream());
oin = new ObjectInputStream(request.getInputStream());
ThanksI'm new to Servlet development, but I'll try to help.
The error code 500 usually means the servlet is confused, so you will want to focus server side. And in your case, you have created an output stream on your response object before you have created an input stream on your request object. I don't think that is correct. I think the order of those two processes needs to be reversed. Read the request headers first, then construct the response. -
Email attachments - Network Access Message, Error Code: 500
Hi!
'''Can't open or save attachments from my email''' (after upgrade to Firefox 6.0). By clicking on them, the tab with an error comes (Error Code: 500):
'''Network Access Message: The page cannot be displayed'''
'''Next info:''' If i simply add an 's' to http:// in the error tab link (manually rewrite the adress to https://), '''it works''' and the attachment opens (jpg, pdf, sound file or all others) or can be saved! (comes the dialog window if I want to open or save it).
I am using XP, Mozilla Firefox 6.0.
With IE the same problem.
With Firefox 5.0 came this problem only from time to time, vanished mostly by refreshing the site.
Under W7 on my laptop no problems occured.
I tried to search in the Mozilla support, forums, google and in the Firefox network and proxy setup, but i can't figure it out.
Thanks for advices!Dear Wang Chao:
I checked http://localhost:8080/flashaccessserver/flashaccess/license/v1?tenant=sampletenant .It seems alright ,as below:
License Server is setup correctly. Total successful requests = 0 requests in 0 ms. Average response time = 0 ms. Average throughput = 0 requests per sec Verifying tenant 'flashaccessserver/sampletenant'... Schema ... Valid. Credentials ... Valid. Authorizer extensions: com.adobe.flashaccess.server.license.extension.auth.sample.SampleAuthorizer ... Valid.
PS:I posted vinwang<[email protected]> with demanded files ,but I did see your private email ,did I miss it?
Best regards,
Sun zhenyu -
HTTP Error Code 500 Internal Server Error creating connection
Hi, i have an error when i try to create a database connection
i have windows 7
php 5
mysql 5
if i try to connect to mysql with a icode i gererate it connects perfect.
if i use for example ems mysql manager it connects perfect to the databases
but when i try to create a connection in dreamweaver it appears:
HTTP Error Code 500 Internal Server Error
i dont know what to do.
i have done a lot of steps for solve other errors:
- chance mysql passwords for old_password
- remove cache file
any idea ??
thanks.I would look at your log files on your server to see what is the issue.
You most likely will have a php error log and a server error log. That will point you in the right direction. -
Server returned code (500) with message Internal Server Error and content
Hi cracks,
I am trying to run the web service
InternalRequestSRMUpdateRequestConfirmation_In
an get following error :
Server returned code (500) with message <Internal Server Error> and content type <text/html; charset=utf-8>.
any idea?
rgds
Vincentyes,
you got crash aka shortdump in your system.
- webserver: didn't crash, because it issued an error 500, so it works
- remains either the soap runtime, which usually doesn't dump but throw errors and the application itself.
I'd look into the tracefiles (ST11) or tie the debugger to the service in question (SICF) and try to find out hat happens/d.
anton -
Dear Experts,
I am very critical situation due to this timeout error in ECC, please help me as much as you can. Go-live date is very near, but I am not getting any clue why this error is occurring. our ECC system is EHP 4, and PI is dual stack 7.4
My scenario is synchronous ABAP proxy to HTTP_AAE. request is triggering from ECC via proxy and reaching to third party (bank) through PI, I am reviving the response back in PI from bank. But from PI to ECC the response is not reaching. So in ECC after the defined Timeout limit its getting timed out.
I have tried everything by increasing the timeout in ECC more than 15 minutes in HTTP_TIMEOUT under SXMB_adm in ECC, but nothing worked, even if I am increasing for half an hour then also its getting timeout after half an hour.
response from bank to PI is coming within 30 to 40 seconds, but PI is not sending the response back to ECC.
This is classical scenario, and I have checked the trace via SXMB_Moni in PI as well as in ECC, in ECC its showing the timeout error, but in PI i did not see any trace for this error.
I have read many thread on SCN for the same error, and everywhere it has been suggested to increase the timeout, and I have tired that, it didn't help me.
All ABAP proxy configuration has been done as follows.
RFC destinations in ECC
LCRSAPRFC(TCP/IP)
SAPSLDAPI ((TCP/IP))
G type destination to path "/sap/xi/engine?type=entry"
G type destination SAP_PROXY_ESR to path "/rep"
All the destination connection test is working fine.
but i have a doubt on G type destination(AAE_XDJ) to path "/sap/xi/engine?type=entry" which is returns the status code 500 with message "Empty HTTP request received", is it ok with 500 ?
Configuration in ECC Integration Engine configuration is as follows
Questions
How the message gets pushed to ECC from PI, once the message received in PI, I believe by G type RFC destination on path "/sap/xi/engine?type=entry" , please clarify.
How to trace this, if message is not getting pushed to ECC, I mean I have checked the trace in PI XSMB_MONI, but didn't get anything for this error. In ECC SXMB_moni only I am able to the timeout error.
Please expert help me as soon as you can, this error really effecting me badly in front of management
Thanks,
FarhanHi Hareesh,
I configured the scenario based on ICO, and again I received the same timeout error in ECC.
I am really sick with this error, and I have raised the OSS message to SAP. Meanwhile I just want to double check my entire configuration with you. Please see the below configuration (for classical) for ABAP proxy to HTTP_AAE, and let me know if anything is wrong.
Request structure (ECC->PI->Bank)
<?xml version='1.0' ?>
<PaymentInfoMessage>
<PaymentInfoRequest>
<CompanyCode>Partner01</CompanyCode>
<BankCode>BSFRSARI</BankCode>
<StartDate>2006-07-09T00:00:00</StartDate>
<EndDate>2006-07-09T00:00:00</EndDate>
<TransactionType>940</TransactionType>
</PaymentInfoRequest>
</PaymentInfoMessage>
Response Structure (Bank->PI->ECC)
<?xml version="1.0"?>
<PaymentInfoMessageResponse>
<PaymentInfoResponse>
<TransactionType>940</TransactionType>
<SequenceNum>1</SequenceNum>
<ReceiptTime>2002-01-02T18:01:00</ReceiptTime>
<ProcessStatus>1</ProcessStatus>
<Comment>No Comment</Comment>
<TransactionData>:20:MT940-1007200601
:25:3210000079901
:28C:190/0001
</TransactionData>
<CompanyCode>PARTNER01</CompanyCode>
</PaymentInfoResponse>
<StatusCode>OK</StatusCode>
<StatusDetail>OK</StatusDetail>
<ResponseItemCount>2</ResponseItemCount>
</PaymentInfoMessageResponse>
ESR Configuration
Please see the below screenshot for ESR config. I have created 4 data types, 4 message types, 2 Service interface (synchronous), 2 mapping and one operation mapping.
I just want to clarify about selecting the Request and response message type in inbound and outbound service interface.
<?xml version='1.0' ?>
<PaymentInfoMessage>
<PaymentInfoRequest>
<CompanyCode>Partner01</CompanyCode>
<BankCode>BSFRSARI</BankCode>
<StartDate>2006-07-09T00:00:00</StartDate>
<EndDate>2006-07-09T00:00:00</EndDate>
<TransactionType>940</TransactionType>
</PaymentInfoRequest>
</PaymentInfoMessage>
Response Structure (Bank->PI->ECC)
<?xml version="1.0"?>
<PaymentInfoMessageResponse>
<PaymentInfoResponse>
<TransactionType>940</TransactionType>
<SequenceNum>1</SequenceNum>
<ReceiptTime>2002-01-02T18:01:00</ReceiptTime>
<ProcessStatus>1</ProcessStatus>
<Comment>No Comment</Comment>
<TransactionData>:20:MT940-1007200601
:25:3210000079901
:28C:190/0001
</TransactionData>
<CompanyCode>PARTNER01</CompanyCode>
</PaymentInfoResponse>
<StatusCode>OK</StatusCode>
<StatusDetail>OK</StatusDetail>
<ResponseItemCount>2</ResponseItemCount>
</PaymentInfoMessageResponse>
ESR Configuration
I have simply created 2 data types for requests(ECC->PI->Bank) and did one to one mapping. Similarly for response(Bank->PI->ECC) 2 data types, one to one mapping for this as well.
But I just want to clarify about selecting the Request and response message type in inbound and outbound service interface. please explain me this for synchronous interface.
Please see the below structure from ESR and inbound and Outbound service and let me know if the selection of Request and response message types is correct or not.
OutBound service interface
Inbound service interface
Thanks,
Farhan
Maybe you are looking for
-
How do you delete apps from iPod touch?
I want to free space on my iPod touch. I do not want or use most pre installed apps. How are they deleted?
-
Windows xp pro stalls - blank screen- hardware or software problem?
Hi Guys, My system is about one month old and has been awesome in performance and graphics. Suddenly it (windows xp pro) stalls after flashing the windows loading screen and it goes blank. Looks like a software problem? I am posting on this forum bec
-
Should I wait or should I go?
Should I wait for the supposed MBP redesign this year or go ahead and buy a baseline 13" or 15" MacBook Pro? I dont have a true need for it right now, but I do desire one. General usage will be for Youtube work and running a Virtual Machine of Window
-
Hello, I went to System Preferences > Sharing > I checked Personal Web Sharing. After that I get this information "View this computer's website at http://ipaddress/ or your personal website at http://ipaddress/~myusername/" When i clicked on the firs
-
Error in Sharepoint 2013.
Hi Friend, I have upgraded sharepoint 2010 application into sharepoint 2013. i am getting the below error message when i excuted the SP2013 application. Sorry, something went wrong Failed to get value of the "Request Type" column from the "Managed Me