HTTPS and Installer-Desc fails on Linux

I have an application which needs an installer before it can be run. If I deploy my application on a server reachable over HTTP everything works fine. Accessing the same JNLP-Files using HTTPS fails with a message that Java 1.4+ is required for HTTPS although I am using 1.4.2_07 on my Linux (Red Hat 9.0).
If I start the same application on my WinXP everything works fine.
If I remove the installer jnlp from my applications jnlp everything starts fine also with HTTPS on my Linux.
Has anybody ran into the same problem? How can I solve that (in production I can only use HTTPS)?

I was able to install the 10G database for linux on Fedora without any problems, as described.

Similar Messages

Trying to re-install CS5.5 and installer is failing.

I recently had to recover my hard drive, and after recovery my CS5.5 stopped working. I did a clean uninstall, and am now trying to reinstall, but the installer fails.
Here are my PDApp.log files from the most recent try:
Sun Oct 19 18:40:00 2014
[INFO] PIM - FREE PIM Instance ...
Sun Oct 19 18:53:26 2014
[INFO] Setup - Build Version - 2.0.242.0
Sun Oct 19 18:53:26 2014
[INFO] Setup - Logging Level verbosity Set to 4
Sun Oct 19 18:53:26 2014
[INFO] Setup - TimeLog: Bootstrapper Start
Sun Oct 19 18:53:26 2014
[INFO] Setup - TimeLog: Start initial checks
Sun Oct 19 18:53:26 2014
[INFO] Setup - Launch Path set to /Volumes/CS5_5 Mstr Coll/Adobe CS5_5 Master Collection
Sun Oct 19 18:53:26 2014
[INFO] Setup - Found 3 packages in setup manifest
Sun Oct 19 18:53:26 2014
[INFO] PIM - Build Version - 2.0.242.0
Sun Oct 19 18:53:26 2014
[INFO] PIM - Logging Level verbosity Set to 4
Sun Oct 19 18:53:26 2014
[WARN] PIM - Detected Old content in USF trying to delete it...
Sun Oct 19 18:53:27 2014
[WARN] PIM - Successfully deleted old content...
Sun Oct 19 18:53:27 2014
[INFO] PIM - Build Version - 2.0.242.0
Sun Oct 19 18:53:27 2014
[INFO] PIM - Logging Level verbosity Set to 4
Sun Oct 19 18:53:27 2014
[INFO] PIM - CREATE PIM Instance ...
Sun Oct 19 18:53:27 2014
[INFO] PIM - trying to createOrUpdatePIMDbSchema.
Sun Oct 19 18:53:27 2014
[INFO] PIM - SUCCESS Created Tables.
Sun Oct 19 18:53:27 2014
[INFO] PIM - PIM Database is Up To Date.
Sun Oct 19 18:53:27 2014
[INFO] PIM - Updater Inventory location:/Volumes/CS5_5 Mstr Coll/Adobe CS5_5 Master Collection/Install.app/Contents/Frameworks/UpdaterInventory.framework/UpdaterInventory
Sun Oct 19 18:53:27 2014
[INFO] PIM - trying to createOrUpdatePIMDbSchema.
Sun Oct 19 18:53:27 2014
[INFO] PIM - Current db schema version on machine 1.
Sun Oct 19 18:53:27 2014
[INFO] PIM - Current db schema version to install 1.
Sun Oct 19 18:53:27 2014
[INFO] PIM - PIM DB Schema is up to date. Current schema version is 1.
Sun Oct 19 18:53:27 2014
[INFO] PIM - PIM Database is Up To Date.
Sun Oct 19 18:53:27 2014
[INFO] PIM - PackageCheck: Package id 6631D8B7-5630-4063-8AE4-73AEBA07ACE7 is a old Package, new is installed on the system. Size required: 49135402
Sun Oct 19 18:53:27 2014
[INFO] PIM - PackageCheck: Package id E151B8CE-26AF-4884-B06C-E54B0283C4E7 is a old Package, new is installed on the system. Size required: 15938807
Sun Oct 19 18:53:27 2014
[INFO] PIM - PackageCheck: Package id AD43D07D-5EFD-46F9-B542-E802BC4773E5 is a old Package, new is installed on the system. Size required: 4288850
Sun Oct 19 18:53:28 2014
[INFO] PIM - PackageCheck: Package id 6D19AB79-7CA3-4DB5-8E2E-3E9655C26EDC is a old Package, new is installed on the system. Size required: 14669528
Sun Oct 19 18:53:28 2014
[INFO] PIM - PackageCheck: Extra Package id 37DD9F8C-F8B1-4FA7-A56F-593A91521C36 found in ACF. Size required: 3299616
Sun Oct 19 18:53:28 2014
[INFO] PIM - PackageCheck: Extra Package id 4B8D1971-A8EA-4692-8980-C81886B6575E found in ACF. Size required: 13253275
Sun Oct 19 18:53:28 2014
[INFO] PIM - PackageCheck: Extra Package id 81B17074-E5A1-48C7-8BEA-E895C2BC4DF5 found in ACF. Size required: 16264438
Sun Oct 19 18:53:28 2014
[INFO] PIM - PackageCheck: Extra Package id C9278FC0-DDEE-487F-B7A0-4A1ACD9D12AE found in ACF. Size required: 15826838
Sun Oct 19 18:53:28 2014
[INFO] PIM - pim_haveEnoughDiskSpaceToInstallPackages reqSize ... 145944429
Sun Oct 19 18:53:28 2014
[INFO] PIM - freeDiskSpace ... 54465241088
Sun Oct 19 18:53:28 2014
[INFO] Setup - TimeLog: End initial checks
Sun Oct 19 18:53:28 2014
[INFO] Setup - TimeLog: Begin Installing
Sun Oct 19 18:53:28 2014
[INFO] PIM - START installPackage at file /Volumes/CS5_5 Mstr Coll/Adobe CS5_5 Master Collection/packages/core/PDApp.pimx
Sun Oct 19 18:53:31 2014
[INFO] PIM - START installPackage at file /Volumes/CS5_5 Mstr Coll/Adobe CS5_5 Master Collection/packages/UWA/UWA.pimx
Sun Oct 19 18:53:32 2014
[INFO] PIM - START installPackage at file /Volumes/CS5_5 Mstr Coll/Adobe CS5_5 Master Collection/packages/DWA/DWA.pimx
Sun Oct 19 18:53:33 2014
[INFO] PIM - START installPackage at file /Volumes/CS5_5 Mstr Coll/Adobe CS5_5 Master Collection/packages/LWA/LWA.pimx
Sun Oct 19 18:53:41 2014
[WARN] PIM - RemoveQuarantineInfo from File /Users/callibug/Applications/Adobe/OOBE/PDApp/install.sig .
Sun Oct 19 18:53:41 2014
[INFO] Setup - TimeLog: End Installing. Now launching PDApp
Sun Oct 19 18:53:41 2014
[INFO] Setup - TimeLog: PDApp launched. Waiting for PDApp window to come
10/19/14 18:53:41:504 | [INFO] | | ASU | PDApp | PDApp | | | 14207 | Build Version - 7.0.0.233
10/19/14 18:53:41:504 | [INFO] | | ASU | PDApp | PDApp | | | 14207 | Logging Level verbosity Set to 4
10/19/14 18:53:41:504 | [INFO] | | ASU | PDApp | PDApp | | | 14207 | Application initialization start, Looking for command line arguments
10/19/14 18:53:41:504 | [INFO] | | ASU | PDApp | PDApp.CommandLineParser | | | 14207 | Parsing the command line provided. Number of command line arguments is 5
10/19/14 18:53:41:505 | [INFO] | | ASU | PDApp | PDApp | | | 14207 | Detecting Applet Database file...
10/19/14 18:53:41:505 | [INFO] | | ASU | PDApp | PDApp.AppletManager | | | 14207 | AppletManager initialize...
10/19/14 18:53:41:505 | [INFO] | | ASU | PDApp | PDApp | | | 14207 | Fetching Applet registeration information...
10/19/14 18:53:41:505 | [INFO] | | ASU | PDApp | PDApp.AppletManager | | | 14207 | Applet database path - /Users/callibug/Applications/Adobe/OOBE/PDApp/
10/19/14 18:53:41:505 | [INFO] | | ASU | PDApp | PDApp.AppletManager | | | 14207 | PIM library path - /Users/callibug/Applications/Adobe/OOBE/PDApp/core/AdobePIM.dylib
10/19/14 18:53:41:505 | [INFO] | | ASU | PDApp | PDApp.AppletManager | | | 14207 | Loading PIM library...
10/19/14 18:53:41:546 | [INFO] | | ASU | PDApp | PDApp.AppletManager | | | 14207 | Fetching PIM API's...
10/19/14 18:53:41:549 | [INFO] | | ASU | PIM | PIM | | | 14207 | Build Version - 7.0.0.233
10/19/14 18:53:41:549 | [INFO] | | ASU | PIM | PIM | | | 14207 | Logging Level verbosity Set to 4
10/19/14 18:53:41:549 | [INFO] | | ASU | PIM | PIM | | | 14207 | CREATE PIM Instance ...
10/19/14 18:53:41:555 | [INFO] | | ASU | PIM | PIM | | | 14207 | trying to createOrUpdatePIMDbSchema.
10/19/14 18:53:41:556 | [INFO] | | ASU | PIM | PIM | | | 14207 | Current db schema version on machine 1.
10/19/14 18:53:41:556 | [INFO] | | ASU | PIM | PIM | | | 14207 | Current db schema version to install 1.
10/19/14 18:53:41:556 | [INFO] | | ASU | PIM | PIM | | | 14207 | PIM DB Schema is up to date. Current schema version is 1.
10/19/14 18:53:41:556 | [INFO] | | ASU | PIM | PIM | | | 14207 | PIM Database is Up To Date.
10/19/14 18:53:41:556 | [INFO] | | ASU | PDApp | PDApp.AppletManager | | | 14207 | Getting applet data from Applet database
10/19/14 18:53:41:559 | [INFO] | | ASU | PDApp | PDApp.AppletManager | | | 14207 | All installed pakages version string (pim_getCurrentPackagesVersion) is CCM:7.0.0.237|D6:7.0.0.233|DECore:7.0.0.233|DWA:3.0.94.0|LWA:3.0.64.0|P6:7.0.0.125|PDApp: 7.0.0.235|UWA:7.0.0.233
10/19/14 18:53:41:559 | [INFO] | | ASU | PIM | PIM | | | 14207 | PIMSqlite closeDB status 0
10/19/14 18:53:41:559 | [INFO] | | ASU | PIM | PIM | | | 14207 | FREE PIM Instance ...
10/19/14 18:53:41:559 | [INFO] | | ASU | PDApp | PDApp.AppletManager | | | 14207 | Registering Applets...
10/19/14 18:53:41:564 | [INFO] | | ASU | PDApp | PDApp.AppletManager | | | 14207 | Loading Applet Switcher library: /Users/callibug/Applications/Adobe/OOBE/PDApp/core/switcher/DWA_UI.dylib
10/19/14 18:53:41:566 | [WARN] | | ASU | PDApp | PDApp.AppletManager | | | 14207 | Unable to get the applet switching info... Response is: 8
10/19/14 18:53:41:566 | [INFO] | | ASU | PDApp | PDApp | | | 14207 | DWA_UI argument on command line. Launching a different instance
10/19/14 18:53:41:566 | [INFO] | | ASU | PDApp | PDApp | | | 14207 | NO deployment workflow is running ...
10/19/14 18:53:41:614 | [INFO] | | ASU | PDApp | PDApp.WindowManager | | | 14207 | Initializing native WindowManager
10/19/14 18:53:41:614 | [INFO] | | ASU | PDApp | PDApp.MessageQuequeManager | | | 14207 | Message Queue Manager initialized...
10/19/14 18:53:41:614 | [INFO] | | ASU | PDApp | PDApp.AsyncMsgProcessor | | | 14207 | AsyncMsgProcessor initialized...
10/19/14 18:53:41:614 | [INFO] | | ASU | PDApp | PDApp.AsyncMsgProcessor | | | 14207 | AsyncMsgProcessor Message Queue initialized...
10/19/14 18:53:41:614 | [INFO] | | ASU | PDApp | PDApp.ExternalGateway | | | 14207 | ExternalGateway initialized...
10/19/14 18:53:41:614 | [INFO] | | ASU | PDApp | PDApp.ExternalGateway | | | 14207 | NativeCommandHandler initialized...
10/19/14 18:53:41:614 | [INFO] | | ASU | PDApp | PDApp.ExternalGateway | | | 14207 | NativePlatformHandler initialized...
10/19/14 18:53:41:678 | [INFO] | | ASU | PDApp | PDApp.WindowManager | | | 14207 | Creating APEWindow...
10/19/14 18:53:41:678 | [INFO] | | ASU | PDApp | PDApp.WindowManager | | | 14207 | Creating window instance
10/19/14 18:53:41:678 | [INFO] | | ASU | PDApp | PDApp.WindowManager | | | 14207 | Checking for appletID and appletVersion given in CommandLineOptions
10/19/14 18:53:41:689 | [INFO] | | ASU | PDApp | PDApp.WindowManager | | | 14207 | Creating APE stage instance
10/19/14 18:53:41:711 | [ERROR] | | ASU | PDApp | PDApp.WindowManager | | | 14207 | Error in creating APE stage - null!
10/19/14 18:53:41:711 | [ERROR] | | ASU | PDApp | PDApp.WindowManager | | | 14207 | Error in creating APEWindow!
10/19/14 18:53:41:711 | [ERROR] | | ASU | PDApp | PDApp | | | 14207 | Unable to create APEWindow, Quiting Application!
10/19/14 18:53:41:731 | [INFO] | | ASU | PDApp | PDApp.WindowManager | | | 14207 | DestroyAllAPEWindow failed, APE Window count is zero while destroying all APEWindow's
10/19/14 18:53:41:731 | [INFO] | | ASU | PDApp | PDApp | | | 14207 | Terminating MessageQueueManager
10/19/14 18:53:41:731 | [INFO] | | ASU | PDApp | PDApp.AsyncMsgProcessor | | | 14207 | Terminating AsyncMsgProcessor Message Queue
10/19/14 18:53:41:731 | [INFO] | | ASU | PDApp | PDApp.AsyncMsgProcessor | | | 14207 | Terminating AsyncMsgProcessor
10/19/14 18:53:41:731 | [INFO] | | ASU | PDApp | PDApp.MessageQuequeManager | | | 14207 | Message Queue Manager destructed
10/19/14 18:53:41:731 | [INFO] | | ASU | PDApp | PDApp | | | 14207 | Terminating WindowManager
10/19/14 18:53:41:731 | [INFO] | | ASU | PDApp | PDApp | | | 14207 | Terminating NativeCommandHandler
10/19/14 18:53:41:731 | [INFO] | | ASU | PDApp | PDApp.ExternalGateway | | | 14207 | NativeCommandHandler destructed
10/19/14 18:53:41:732 | [INFO] | | ASU | PDApp | PDApp | | | 14207 | Terminating NativePlatformHandler
10/19/14 18:53:41:732 | [INFO] | | ASU | PDApp | PDApp.ExternalGateway | | | 14207 | NativePlatformHandler destructed
10/19/14 18:53:41:732 | [INFO] | | ASU | PDApp | PDApp | | | 14207 | Terminating ExternalGateway
10/19/14 18:53:41:732 | [INFO] | | ASU | PDApp | PDApp.ExternalGateway | | | 14207 | ExternalGateway destructed
10/19/14 18:53:41:732 | [INFO] | | ASU | PDApp | PDApp | | | 14207 | Terminating APE
10/19/14 18:53:41:732 | [INFO] | | ASU | PDApp | PDApp | | | 14207 | Releasing all locks acquired
10/19/14 18:53:41:732 | [INFO] | | ASU | PDApp | PDApp | | | 14207 | Quiting Application
Can anyone out there help me get through this?
Cheers,
Calli

start here, http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

2nd try and installation still fails at filesystem check PLEASE HELP

This is my second install of Arch.....and it failed again. It said it could not locate the super block for /root. I used the by-label naming scheme and had a /boot, swap, /root and /home directory. /root and /home were both ext4, /boot was ext2. For some reason when checking file systems it could not locate the superblock on /dev/disk/by-label/root. When i tried to use the by-label to replace the superblock it could not be found so i had to use /dev/sda3 (which was /root) I tired several different superblocks (located with systemrescuecd-testdisk) with no success. obviously i am doing something wrong and i would really like to fix it....when i try to access /etc/fstab it says permission denied....i was going to try and rename them by uuid but if i cant get in here i dont know how i would. i already got the uuid for each partition its just a matter of assigning it in fstab now i think.......i really dont wanna give up on arch so please help me out.

JoeKer1086 wrote:This is my second install of Arch.....and it failed again. It said it could not locate the super block for /root. I used the by-label naming scheme and had a /boot, swap, /root and /home directory. /root and /home were both ext4, /boot was ext2. For some reason when checking file systems it could not locate the superblock on /dev/disk/by-label/root. When i tried to use the by-label to replace the superblock it could not be found so i had to use /dev/sda3 (which was /root) I tired several different superblocks (located with systemrescuecd-testdisk) with no success. obviously i am doing something wrong and i would really like to fix it....when i try to access /etc/fstab it says permission denied....i was going to try and rename them by uuid but if i cant get in here i dont know how i would. i already got the uuid for each partition its just a matter of assigning it in fstab now i think.......i really dont wanna give up on arch so please help me out.
...Wait a sec. i am not going to make fan of you.but i must ask this for sure..
you know? "/" (pronounce root) is not /root. you need / . Did you make / ? if you dont have / you cant set /root as a system. i dont know what is the matter of superblock by the post (no enough info). well, i am asking where is the / because you didnt mention this at all. maybe you created / and call it /root?
try it more simple. you only need / and swap partition to install(after you finish installation you can make rest of partitions if you have space)
the point of Arch installation is you better finish it as simple as you can, then setup others after you boot from Archlinux.
Arch installer is far from perfect. (just it is enough to complete installation)

Path and installation Problem in suse linux

i have installed jdk1.3 in suse linux.
when i give /usr/lib/jdk1.3/java or javac it runs the class or compiles the .java file as expected.
But the problem is if i give /usr/lib/java/bin/java
/usr/lib/java/bin/javac
/usr/lib/java/bin/javap
it runs only the java .
what can i do.

Hi,
It could be because different versions of java are installed on your Suse machine. If you type java -fullversion or java -version (it might be double -) , this will give you a clearer picture on the versions of java installed.
Also which java or which -java can help.
best,
kev

Brand new 10.6.3 snow leopard disc installation always fails on MacBook pro

So I ask, is the only thing left to do here to buy a new hard drive? I figured I would ask as I feel I have tried everything.
I have a 17 inch 2.4 ghz intel core 2 duo MacBook pro with 4 gb ram and a 500 gb hitachi 7200 rpm hard drive that was installed in march of 2010. I was running osx snow leopard 10.6.3 with all updates with two partitions, a 450 gb for mac and 50 gb for bootcamp and windows 7. About 3 weeks ago, after downloading some programs from cnet, I started having problems.
I could not boot to the Mac side, but booting to windows was fine. I would get hung on a blue screen with my cursor, but it never would go further. So I used
my snow leopard 10.6.3 disc to run disk utility, repaired disk and it completed the repair and partitions, always leaving a note saying, " updating boot (something) as needed. Everything repaired and was corrected, but I still could not boot to Mac. Still hung on blue screen. I reset the PRAM, still nothing, but still no reoccurring errors in disc repair.
So I purchased an external hd and backed up everything, since I never used time machine ( I know) and backed up all my data. I erased and zero'd out everything on the Mac partition. I then tried to reinstall 10.6.3 on the hard drive, and it seemed to fail repeatedly. I would install, fail, reformat, repeat repeat over and over. I was having trouble with the DVD drive taking the disc a few times, and noticed some very minor scratches on the disc, nothing major. So, I decide it could be the disc, and went out to purchase one at best buy. Came back, ready to go, took the disc the first time, and fails again and again. ( installation failed, please contact the software manufacturer )
One thing I noticed in disc utility is that it would always seem to hang up installation around 6.65 gb. So I called my free 90 day software support from apple, and they of course suggested I take it to a Mac genius... Haven't been there yet because of the proximity to my house. I then decided to backup the bootcamp side , which was working just fine, and erased that as well, I repartitioned the drive, erased the disc and tried again and again and installation kept failing.
Other things I have done, took out 2gb ram and tried, nothing. Also changed a number in terminal that was 12000' to 30000' a tip from another forum, that also failed. I am at wits end here, and can't find anyone else with this problem. Any other suggestions before i scrap the hd?
Thanks in advance for your advice,

DVD drive ? The software disc itself is brand new and boots fine

Use of installer-desc tag and the ExtensionInstallerService of the jnlp

I have an application where, the properties file is outside the jar file. Each client machine has it's own copy of properties file. At some instances the user has to update the properties file ( to him it's a config file). This is ok with the system when i was not using Web start. Now with web start, i want to give the properties file to the user along with the download. ie. I don't want to post it explicitly, it should go with the installation(ie. download), but place it on a specified location on the client machine. I've seen the <installer-desc> tag, where i've seen there's someother jnlp file also related to the main jnlp file. I couldn't get the correlation. Can anybody help me giving me some info. about <installer-desc> and the ExtensionInstallerService of the javax.jnlp package. Please!! it's very urgent.
Thanks
Aparna

As you have proberbly seen, I have a problem with the return from a <installer-desc> but here is how I did it.
main.jnlp
<?xml version="1.0" encoding="UTF-8"?>
<jnlp codebase="file or url goes here" >
<information>
<title>Main launcher title</title>
<vendor>Company name</vendor>
<offline/>
</information>
<resources>
<j2se version="1.2+" />
<extension
name="Native installer"
href="native.jnlp">
</extension>
<jar href="main.jar" main="true"/>
</resources>
<application-desc main-class="unic.app.launch"/>
</jnlp>
native.jnlp
<?xml version="1.0" encoding="UTF-8"?>
<jnlp codebase="file or url goes here/">
<information>
<title>Native installation</title>
<vendor>Company name</vendor>
<offline/>
</information>
<resources>
<j2se version="1.2+" />
<jar href="native.jar" main="true"/>
</resources>
<installer-desc main-class="unic.native.install" />
</jnlp>
unic.native.install makes all connections with the ExtensionInstallerService (progressbar/heading/status) and installs native stuff. Works all fine, but when all is installSucceeded(false), JWS shows the error "Installation failed" ?? Don't see why..

OPSM 1.2 [Oracle pedigree and Serialization manager] installation is failed

Hi All,
We are doing OPSM 1.2 installation on Oracle Enterprise Linux 5.6 [64-bit].
Steps we have done:
1. installed 11g db and created repositories for soa server.
2. installed weblogic server 10.3.6
3. Installed soa server & created two managed servers soa_server1 and pas_server1 in weblogic as per the doc " Oracle Pedigree and Serialization Manager Installation Guide"
4. And created required schemas in db for OPSM.
5. and ran $MW_ORA_HOME/common/bin/wlst.sh ./pasMasterInstall.py
Below are The error we are getting at the time of deployment is:
Deploying the PasSerializationManager application...
Deploying application from /u01/ORASOA/Middleware/Oracle_SOA1/pas/applications/install/PasSerializationManager.ear to targets pas_server1 (upload=false) ...
<Dec 19, 2013 7:56:03 AM EST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, PasSerializationManager [archive: /u01/ORASOA/Middleware/Oracle_SOA1/pas/applications/install/PasSerializationManager.ear], to pas_server1 .>
....................................................................................................No stack trace available.
This Exception occurred at Thu Dec 19 08:01:04 EST 2013.
weblogic.management.scripting.ScriptException: Error occured while performing deploy : The action you performed timed out after 300,000 milliseconds.
Error: Unable to deploy the Ear Files.
Shutting down the AdminServer...
Stopping the AdminServer...
Finished stopping the AdminServer.
Moving the Installed Files to the Install Directories...
Finished moving files to install directory.
Restoring Backup...
Finished restoring backup.
ERROR: Installation Failed!
Note: Please review the above output buffer to determine what error(s)
      have occurred. You must fix any errors before attempting to
      retry the installation.
WARNING: System failed to register the MDS Repository with WebLogic. It is likely
that the MDS Repository has already been registered. Please verify the registered
metadata repositories using Oracle's Enterprise Manager application. Once logged
into Enterprise Manager, expand the Metadata Repositories node and verify an entry
exists for mds-mds-ApplicationMDSDBDS. In addition, click on the repository and
verify it is targeted to the appropriate servers.
Exiting WebLogic Scripting Tool.
<Dec 19, 2013 8:01:09 AM EST> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.>
In pas_server1.log file:
Caused By: oracle.mds.exception.MDSExceptionList: MDS-01329: unable to load element "persistence-config"
MDS-01370: MetadataStore configuration for metadata-store-usage "MAR_TargetRepos" is invalid.
MDS-00929: unable to look up name "jdbc/mds/opsm" in JNDI context
Unable to resolve 'jdbc.mds.opsm'. Resolved 'jdbc.mds'
        at oracle.mds.config.PConfig.loadFromBean(PConfig.java:1008)
        at oracle.mds.config.PConfig.<init>(PConfig.java:767)
        at oracle.mds.config.MDSConfig.loadFromBean(MDSConfig.java:1151)
        at oracle.mds.config.MDSConfig.loadFromElement(MDSConfig.java:1218)
        at oracle.mds.config.MDSConfig.<init>(MDSConfig.java:781)
        at oracle.mds.config.MDSConfig.<init>(MDSConfig.java:728)
        at oracle.mds.internal.lcm.deploy.DeployManager.deploy(DeployManager.java:529)
        at oracle.mds.internal.lcm.deploy.DeployManager.startDeployment(DeployManager.java:211)
        at oracle.mds.internal.lcm.MDSLifecycleListenerImpl.start(MDSLifecycleListenerImpl.java:215)
        at oracle.mds.lcm.weblogic.WLLifecycleListener.preStart(WLLifecycleListener.java:77)
        at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
        at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
        at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:62)
        at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:283)
        at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
        at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
        at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
        at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
        at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
        at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
        at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:208)
        at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
        at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
        at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
        at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
        at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
        at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
        at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
        at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
        at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Any one please provide resolution to fix the issue.
Thanks
skjb

Have you searched MOS website for (MDS-01370 AND MDS-00929) and go through the docs?
If none of MOS docs help, then please log a SR.
Thanks,
Hussein

How can I install Adobe Photoshop Elements Update 9.0.3 after I get a message that Installation has failed and the solution is not in troubleshooting or forums?

My Photoshop Elements 9 stopped working a couple of weeks ago. When I clicked the PSE button nothing happened. I tried this several times over a few days and it still failed. I uninstalled the program and re-installed it. It worked well. Then I tried to install the Update 9.0.3. The download was almost successful. When it was about to show 100% successful for the download, an error message said the installation had failed and that I should try later. I tried this many times over a few days and the same result occurred. I tried troubleshooting and the answers to questions, but I could not find an answer. I don't know where to go to see if anybody has answered my question. How can I install Update 9.0.3?
Colin Hansen

Try downloading and installing the 9.0.3 updater from here:
mac
Adobe - Photoshop Elements : For Macintosh
windows
Adobe - Photoshop Elements : For Windows

Linux on my X220T (and why it failed)

I’m sorry but this is going to be a long post but I have seen so many posts out there from people in my position - making an attempt to migrate from Windows to Linux - that I felt compelled to share my experiences. This is not a Linux bashing post either. Like UFOs, I want to believe. I just haven’t seen the light yet so if there are any Linux evangelists out there who have got Linux working on their X220T then I would *love* to hear from you
Background and reasons for change:
I am not your ordinary Windows user. I work in IT and I’ve been working with Windows since the days of v2 (yes I’m that old) running on Dos. I’m comfortable with it. Because of my age I’m also comfortable with the command line. I’ve worked with Xenix (a variant of the original Unix) and have a grasp of the fundamentals. Now I’m all grown up and an IT consultant I wanted to ‘round out’ my understanding of my business by getting to grips with Linux in order to write code. I understand it’s very different to the nice little bubble of Visual Studio where everything happens around you. I’ve yet to find out Sure I can produce a virtual machine and learn in there but wanted to immerse myself in it all so decided to convert my X220T. This little beauty is not my main work computer so I could sacrifice the contents. If your X220T is your only machine and you need it for serious stuff, think carefully before going ahead.
Starting point:
My X220T was pretty much out-of-the-box Windows 7. It was working fine, but had the odd glitch. Wouldn’t hibernate properly (although it did before an ‘upgrade’ screwed it up) and the mouse kept losing its settings despite following all the advice, upgrading, hacking etc to fix it. I also had Windows 8 preview on the ‘Q’ drive and was liking that but of course it’s not really ready to go yet.
My choice was Linux Mint with the KDE desktop. Did a bit of digging. Seemed to do the job. So I took several backups, trashed the drive and installed it.
My previous experiences with Linux have always been a battle to get the OS to see certain devices. Wireless cards never used to work. Peripherals failing. Not resuming from hibernate. That kind of thing. This time it was flawless. It simply installed. Everything appeared to work! Fantastic!! Of course it wasn’t all there yet. But because my internet access was up and running (had always been an issue before) I was a happy man.
Then three things happened almost simultaneously.
I wanted to read an eBook and the screen wouldn’t rotate
I couldn’t log on using my fingerprint reader
My fan wouldn’t shut up
So thought I would tackle the first issue. KDE supports a tool that pops a nice little icon on to your task bar to allow screen rotation. Didn’t work. What it did do was install the Wacom drivers to manage the touch screen and it would re-orientate the mouse ‘as if’ the screen had rotated, but the display itself was in portrait mode. So spent two evenings after work working out how to make this happen. In the end I wrote two shell scripts to rotate the screen AND to set the Wacom drivers to orientate the mouse and stylus properly. Job done! Felt pleased with myself. I was cross that the KDE interface screen button thingy didn’t work properly but that’s life. I had learned something. Two dos-like icons on my task bar flipped my screen (albeit slowly) from landscape to portrait and back again.
Meanwhile, I’m sitting in my conservatory (no power) and watching my battery disappear in about two hours. Under windows, my usage pattern gave me at least five hours before a re-charge. And that pesky fan didn’t run once! Peace!! But not with Linux. It was annoying so thought I would tackle that next. Everyone uses their machine differently so since power consumption is quite subjective I thought if I fixed this I could move on to other things and then ‘suddenly notice’ that my battery is still powering my baby after four or five hours.
After research and digging into a cpu frequency daemon (background process) I realised that this was the wrong line of attack. That took another two evenings of work. The Linux Mint kernel doesn’t support this. More research suggested that this was an old/different methodology and the approach was to use cpu ‘governers’ to control cpu frequency switching. The governers have names like ‘ondemand’ and ‘conservative’ and as you might guess, the conservative one holds the processor speed down to reduce power consumption. You may assume dear reader that I had done all the other stuff. Turning off bluetooth only happened in software and I gave up before researching that. It may be possible to turn it off in hardware via the operating system but didn’t get that far. Screen brightness, wireless etc. Typically when I read a book I flick the hardware radio-off switch on the side which of course turns off bluetooth and wireless, so they were taken out of the equation in terms of power consumption.
After another evening of digging I managed to discover how to instruct the machine to use the ‘conservative’ governor. By now I’m starting to get a bit fed up. My philosophy was partly to learn what it was like to live in the world of Linux, but mostly to get to grips with the C++ compilers, possibly mono (A windows-like development environment) and Apache (system for hosting web sites) but hadn’t got beyond the foibles of the operating system. Finally got the conservative governor in place, rotated my screen (still working!) and settled down to a good read (purely for testing purposes of course
Within five minutes, on the came the pesky fan. Battery gone in about three hours. This had me seriously pissed off by now. But still wanted to battle on. Thought I would tackle the fingerprint reader next. Found a driver but it didn’t work. I could register a fingerprint but when it came to save the results it died. Even as the godlike super user it failed.
Then I found another gui based app and that one worked. Well, it worked nicely in-system. Anything that needed elevated privileges it would work for. I just couldn’t use it to log in. When the laptop was in tablet mode I couldn’t authenticate with my fingerprint reader and there was no on-screen keyboard to use as an alternative.
And it was all these little things that eventually drove me screaming back towards Windows. I’m now running Windows 8 CP as my main desktop. It’s incomplete and has its own set of foibles, but by installing some of the drivers that Lenovo supply for Windows 7 it is perfectly usable.
The screen rotates out of the box
The buttons along the bottom of the screen work to rotate the screen (never did get that working in Linux but it was on my list
Power consumption is back to being pretty good for a laptop rather than just average
I can turn my bluetooth off at the hardware level but leave my wireless running so that I can browse the internet without hammering my battery too much (using the Lenovo on-screen utility form Windows7)
I can logon with my fingerprint reader and when it fails (I get it wrong three times) I can revert to an on-screen keyboard to get me out of trouble without having to switch to desktop mode to do it.
I know they are small things but they are now what I am used to and what I expect from my operating system so why should I do without them?
My feeling as I sit here writing is that Linux is great. Don’t get me wrong here. I still love it and intend to explore further, but unlike Windows there is a learning curve that you HAVE to climb. You have no choice. When I come home at the end of the day, sure I want to play with my little Lenovo and have some fun. But then I want to relax. Do a bit of surfing, read my ebooks and generally do stuff that the operating system is intended to support. Instead the operating system got in the way of my user experience rather than supporting my user experience. The problem for me is that wihlst I can produce a Linux machine in vmWare or VirtualBox, the driver woes I’ve just described are hidden from you because those virtual worlds either abstract the problem away or don’t port-over the hardware from the host that you want to explore the problems with. The only solution is to buy another X220T to play with and that’s not worth it for me.
I also think that my relatively large understanding of Windows frustrates my experience of because I am now a novice with the computer which I’m definitely not used to and that of course skews my perception.
So if there are any Linux superheroes out there who have solved all the above issues and can lead me into the glorious sunshine of developing in the wonderful world of Linux then please talk to me. And for the rest of you guys in my position for whom this has struck a chord, if you want to play, I’m sure the results are worth it but prepare to be frustrated!!

Hi all. I must be in league with the devil as my lucky number is 13. When I saw Galloping Gerbil or Raring Rhinocerous or whatever the **bleep** thing is called I also saw v13.04 and thought that the time had come to go again!
So it's about a year on now. Two important things have happened. The first is that my trusty old X220T is now no longer my primary machine so I can afford to lose it to experimentation for a while. The second is that the huge behemoth that is Linux is rolling over the bugs and niggles that sent me screaming back to Windows all those months ago.
So I've tried again with Raring Ringtail v13.04 and right now I feel as if I've come home! It's still not right but it's pretty close! More importantly, I fee that I'm no longer in the minority in wanting to get this to work right. There is this big push out there towards touch screen so people are spending time on this and wanting their software to be touch screen friendly so it is!
Before I go on, I was rather shocked when I did my pre-13.040-install research to find this post top of the google list on linux on x220! I'm guessing that my thoughts must parallel a lot of other people thinking about making the jump. So to that end, here's some thinking.
13.04 is close. Really close to being a very serious competitor to Windows. My view is that Linux is about there now. The X220T is a complex beast to support. it has touch, pen, fingerprint readers, rotating screens etc. And it all works pretty well. I can do a sudo apt-get install to make the fingerprint reader work. And it DOES work. Reliably. I still have issues rotating the screen but I've learned enough now to knock up a simple bash script that will do it for me. AND (this is where the Linux philosophy works) I have written the script to suit me. I like to hold the battery unit in my left hand and hold my laptop in portrait mode to read books/browse the internet. Then switch to normal orientation to type emails etc. The script only toggles between normal and anti-clockwise and back again. Works for me.
The issue with Linux was more that it was a philosophy than an operating system. You don't just "use" it. You immerse yourself in it. That made it geeky and non mainstream. You can make it sit up and do stuff that suited you exactly if you were prepared to put the time in. The issue was that until now it didn't do the basics reliably enough to suit everyone. I used to read a lot of stories about sons/friends putting Linux on to Mums/Dads/Grans laptop and it working beautifully. Linux is very very good at this. It just works. But getting it there was a right pain unless you were lucky. Now however that out-of-the-box functionality is really really close. To the point at which Tracey from Essex (forgive me Tracey!) can stick the CD in and expect the same functionality from Linux that she could get from Windows without having to sweet talk that geeky bloke that she knows has a crush on her to come in and sort it all out
Once you get past that bit then you end up in this little wonderful world. Without too much effort courtesy of all those hard-working ordinary people out there, I have a machine that will do most of what I want without tweaks and pokes that take days to research. Now I can browse, read my books, play the odd game and "ignore" the operating system until such times as I choose to tackle the odd tweak. On my relatively small screen for example I want hide the Unity launch bar thingy. However if I do this I can't get it back via the touch interface. Enter Ginn! I have yet to play with tihs but I can configure multi-touch gestures to "do stuff" like making the launcher appear with two finger gestures (!) and that little nugget of configuration pleasure is waiting in the wings for when I get bored reading the news or playing silly games. My operating system has now become a toy, a tool and a learning centre. I can now pursue my long term dream (okay I have modest dreams!) of being able to develop AJAX based web sites using WCF in Mono running under Apache. That means I have all the fun of learning how to use Apache, and working out how to make WCF code in Mono. These things are easy for me under Windows and IIS but how you do it in Linux is a new and exciting challenge! Yes I truly am that boring!
I wish I could change the title of my original post because Linux is coming of age. Windows had better watch out.

I ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

i ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

What's the error mesage?

Cant download and installation failed.

Dear expert im in troubles with my nokia 6600 s60v2 phone.The phones settings is from 02 mobile uk.Presently using in Bangladesh after having Bangladeshi sim and Gprs connection.The voice call is running well.When i goto download any jar,jad or sis file an error display as content type doesnt support,unable to install or service failed to perform operation.Finding this problem i formatted the phone.It is to be mentioned here that after formating the phone,the factory setting comes with 02 mobile uks settings.The firmware of phone is v 3.42.1 16.10.3 NHL 10.Bangladeshi sim and setting working but problem is with download and installation.Kindly help me as how can i make the phone like any setting less or asia specific.Upgrade of firmware can solve the problem or not.An early help is solicited.Regards,malaker

Any one please help me

Im trying to install windows 7 in on my macbook pro, i thought it just install like intel based PC, so i use windows 7 DVD, i format the harddisk, and installation failed. When i reboot, OS X is missing, because i've format my harddisk. So what should ido

Im trying to install windows 7 in on my macbook pro, i thought it just install like intel based PC, so i use windows 7 DVD, i format the harddisk, and installation failed. When i reboot, OS X is missing, because i've format my harddisk. So what should i do to make my MBP is with windows 7

Thanks for all of your help! Big time!
Guys, I been in the business working on PC and MAC for years. So I am not green at this, I was looking for some kind of option to get past the boot loader.. Which is failing.
I know how to boot into these modes.. Done tons of research before posting and couldn't find anything.
It will not go into Internet Recovery, or any thing else. I hear the sound .. then that is it.. I get nothing else..
I have tried clearing the NVRAM which is Option + Command + P + R
Still nothing..
So I thought I would try here to see if maybe there was some trick out there someone might know of that would work.
What else guys? I am hitting th keys right..

I'm about to hulk out guys! Brand new iPhone 5 and need to update iTunes for recognition. Keep getting "the installer encountered an error that caused the installation to fail." Can anyone help? I may smash something very soon.

I'm about to hulk out guys! Brand new iPhone 5 and need to update iTunes for recognition. Keep getting "the installer encountered an error that caused the installation to fail." Can anyone help? I may smash something very soon.

iTunes:
AppName: itunes.exe
AppVer: 10.5.0.142
ModName: unknown
ModVer: 0.0.0.0
Offset: 001be6f6
Quicktime:
EventType : BEX
P1 : QuickTimePlayer.exe
P2 : 7.71.80.42
P3 : 4ea5c6ef
P4 : QuickTimePlayer.dll
P5 : 7.71.80.42
P6 : 4ea5c6d5
P7 : 00005b6d
P8 : c0000409
P9 : 00000000
That's consistent with another application (other than QuickTime) having dropped old QuickTime componentry in non-standard locations on the PC.
So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view options on the PC.
1. Open My Computer from the desktop or Start menu.
2. In the Tools menu, click Folder Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now in My Computer, open your C drive.
Open the "Windows" folder.
Open the "system32" folder.
What files and/or folders can you see in there with QuickTime in the file/folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

Oracle 11g installation on Oracle Enterprise Linux, 64bit version.

Hi
I want to install oracle 11g on Oracle Enterprise Linux, 64bit version.
Do I need to set kernel parameters in this operating system, since it is not standart Linux editions.
or
Can I have a step by step documentation for installing oracle 11g on this operating system?

Hello,
Yes you do need to set kernal parameters in order to meet pre-requisites, otherwise your installation will fail and oracle might not work or unstable.
Here is the best place to find out stepwise installation instruction and kernel parameter configuration
Quick Installation Guide*
http://download.oracle.com/docs/cd/B28359_01/install.111/b32285/toc.htm
Kernel parameter configuration*
http://download.oracle.com/docs/cd/B28359_01/install.111/b32285/toc.htm#CEGFBCFD
You can use this tutorial to install oracle 11g*
http://www.oracle.com/technology/obe/11gr1_db/install/dbinst/dbinst.htm#o
Regards

Adt package fails on Linux w/no information

Hi, I have a project setup and am building native installers happily on both Win7 and Mac OS X using ant and flexTasks.jar.
The Flex SDK version is 4.1.0.16076
adt version "2.0.2.12610"
When I run the build on Ubuntu 10.04, It compiles and builds a .swf, but then the native package installer fails with this:
installer:
     [exec] Current OS is Linux
     [exec] Executing '/home/davis/flex-sdk//bin/adt' with arguments:
     [exec] '-package'
     [exec] '-storetype'
     [exec] 'pkcs12'
     [exec] '-keystore'
     [exec] 'cert/cert.p12'
     [exec] '-storepass'
     [exec] 'secret'
     [exec] '-target'
     [exec] 'native'
     [exec] '/home/davis/git/biblioflip/biblioflip-ui/installer/biblioflip-setup.deb'
     [exec] '/home/davis/git/biblioflip/biblioflip-ui/src/biblioflip-app.xml'
     [exec] '-C'
     [exec] '/home/davis/git/biblioflip/biblioflip-ui/bin-debug'
     [exec] 'biblioflip.swf'
     [exec] 'biblioflip-webapp.jar'
     [exec] 'biblioflip_logo_16x16.png'
     [exec] 'biblioflip_logo_32x32.png'
     [exec] 'biblioflip_logo_48x48.png'
     [exec] 'biblioflip_logo_128x128.png'
     [exec] 'ddl/'
     [exec]
     [exec] The ' characters around the executable and arguments are
     [exec] not part of the command.
     [exec] Invalid AIR file
     [exec] Result: 12
So, I tried to look up result 12 here: http://help.adobe.com/en_US/AIR/1.5/devappsflex/WS5b3ccc516d4fbf351e63e3d118666ade46-7fd6. html#WSBE9908A0-8E3A-4329-8ABD-12F2A19AB5E9
I guess the only thing it references is
12
Invalid input
Verify file paths and other arguments passed to ADT on the command line.
I tried running adt itself with all the same params. It looks like this:
/home/davis/flex-sdk/bin/adt -package -storetype pkcs12 -keystore cert/cert.p12 -storepass secret -target native /home/davis/git/biblioflip/biblioflip-ui/installer/biblioflip-setup.deb /home/davis/git/biblioflip/biblioflip-ui/src/biblioflip-app.xml -C /home/davis/git/biblioflip/biblioflip-ui/bin-debug/ biblioflip.swf biblioflip-webapp.jar biblioflip_logo_16x16.png biblioflip_logo_32x32.png biblioflip_logo_48x48.png biblioflip_logo_128x128.png ddl/
Invalid AIR file
The files are all there:
davis@kafka:~/git/biblioflip/biblioflip-ui$ ls -alh bin-debug/
total 14M
drwxr-xr-x 3 davis davis 4.0K 2010-10-15 02:03 .
drwxr-xr-x 11 davis davis 4.0K 2010-10-15 01:43 ..
-rw-r--r-- 1 davis davis 4.1K 2010-10-15 01:43 biblioflip_logo_128x128.png
-rw-r--r-- 1 davis davis 481 2010-10-15 01:43 biblioflip_logo_16x16.png
-rw-r--r-- 1 davis davis 879 2010-10-15 01:43 biblioflip_logo_32x32.png
-rw-r--r-- 1 davis davis 2.1K 2010-10-15 01:43 biblioflip_logo_48x48.png
-rw-r--r-- 1 davis davis 1.1M 2010-10-15 02:05 biblioflip.swf
-rw-r--r-- 1 davis davis 13M 2010-10-15 02:03 biblioflip-webapp.jar
drwxr-xr-x 2 davis davis 4.0K 2010-10-15 01:43 ddl
I have no other insight into why this is failing. This same build file works just fine on both Mac/Windows and I'm creating native installers for those operating systems that work. Why is it failing on Linux?

After some more playing, I was able to get it to work with the latest versions of Ubuntu, Flex SDK, AIR SDK and the Sun JDK:
- Ubuntu 10.10
- Sun JDK 1.6.0.23
- Flex SDK 4.1.0
- AIR SDK 2.5.0
Strangely, I think this is the same config I had before when it wasn't working. However, this time I made it a point to install the Sun JDK manually, rather than via a DEB or other installer.
Here are links to all of the Linux packages I used:
Java SE 6 Update 23 > jdk-6u23-linux-i586.bin (Direct download from Sun/Oracle)
Flex SDK 4.1.0 > flex_sdk_4.1.0.16076.zip (Direct download from Adobe)
AIR SDK 2.5.0 > AdobeAIRDSDK.tbz2 (Direct download from Adobe)
Let me know if you have any questions. I'm happy to help.

HTTPS and Installer-Desc fails on Linux

Similar Messages

Maybe you are looking for