Https configuration For sender

Hi,
My requirement is to send data to PI through https connection
Do i need to do any settings to enable this?
What are the changes do i need to do for this scenario compared to normal http scenario
What will be the port when i go for https?is it the same http port that ABAP stack uses?
I am able to see only http port in ABAP stack.

Hi,
please have a look here:
http://help.sap.com/saphelp_nw04/helpdata/en/65/6a563cef658a06e10000000a11405a/frameset.htm
https standard port is 443.
For java port:
http://help.sap.com/saphelp_nw04/helpdata/en/a2/f9d7fed2adc340ab462ae159d19509/frameset.htm
Regards
Patrick

Similar Messages

IDoc receiver AEE: Error "Configuration for Sender/Receiver Partner Number/Port is incorrect"

Hi all,
We are on PI 7.4 AEX SP 7. We are trying to get the following scenario working: Inhouse warehouse management system (JMS) --> PI --> ECC (IDoc)
Sender is configured as 3rd party technical system system with business system maintained in SLD
business system has logical system assigned in SLD
adapter specific identifiers show logical system in ID / NWDS
logical system is defined in receiver (ECC system)
partner profile is created in ecc for this very logical system (inbound parameters)
No mapping of EDI_DC40 node in ESB (complete node disabled)
no header mapping in ID / NWDS
receiver IDoc AEE adapter is configured to not enforce control record (Control Record in IDoc XML = Not Mandatory)
no Identifiers specified in receiver IDoc AEE adapter
My guts feeling is that this should work, however, it doesnt't. Failing with "The Configuration for Sender/Receiver Partner Number/Port is incorrect. Enter proper values in Sender/Receiver Component"
Any thoughts are highly welcome.
Cheers
Jens

Hi,
The error mentioned by you is not related to the port..but its related to the Application ...
IDoc 51 means idoc has been received in R/3 client and when it tries to process it ended in error..
Check with the functional consultant for the error you have received..
HTH
Rajesh

HTTPS Configuration for all BSP appliation users

Hi ,
I have enabled HTTPS Configuration for BSPApp using X509 certtfictes in our CRM Landscape.
This i have done for list of users and it working well.
I want the same functionality for all users, Please suugest me.
Regards,
Satya

Any Idea?

Email configuration for sending external mail(GMAIL) from SAP server

Hi
I would like to know the procedure for configuring email server in sap for sending mails to gmail.
Regards
Subha

Hi,
The correct (gmail) email id should be maintained against the user in SU01.
Refer the following links for the help on the setup:
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
http://wiki.sdn.sap.com/wiki/display/XI/SMTPConfigurationinSAPXI

SD EDI configuration for sending invoice to customers

Hi,
Could anybody please tell me what all SD configuration i need to do in
SPRO-->Electronic Data Interchange section for sending invoice through EDI?
I have already done output type configuration and able to generate IDOC when i save my invoice.
Thanks,
Regards,
Satya

Hi All,
Thanks for the response.
But majorily i am looking for SPRO>Sales&Distribution>EDI configuration.
Do i need to do it?
Is it mandatory?
Thanks in Advance.
Regards,
Satya

HTTPS configuration for SOAP adapter

Hi,
We have a requirement where we need to send the request to the target URL with https protocol.
We have raised a request to configure the XI server for HTTPS.
HTTPS has been configured on both ABAP stack and J2EE stack.
But we could not find the HTTPS option in the drop down list of transport protocol in receiver Soap adapter.
For this do we need to do any setting changes on the XI server after the configuration?
Thanks,
Jyothsna .

Hi,
You need to setup SSL layer for HTTPS endpoint.
Possible HTTP security levels are (in ascending order):
HTTP without SSL
HTTP with SSL (= HTTPS), but without client authentication
HTTP with SSL (= HTTPS) and with client authentication
Please go through below link for referance (above information is from below link)
Step by step guide for SSL security
step by step guide to implement SSL
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ff/7932e4e9c51c4fa596c69e21151c7d/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/13/4a3ad42ae78e4ca256861e078b4160/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3a/7cddde33ff05cae10000000a128c20/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0a/0a2e0fef6211d3a6510000e835363f/content.htm
General guide
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a09f3d8e-d478-2910-9eb8-caa6516dd7d9
Message level security
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d024ca8e-e76e-2910-c183-8ea4ba681c51
Regarding message level you can encrypt the message using certificates.
For both of this basis team has to deploy the releavant certificates in XI ABAP Stack or Java stack.
Generally if the scenarios are intra company we dont use any transport level or message level security since the network is already secured.
Check the following links.. you will get the information all about the securities...
http://help.sap.com/saphelp_nw04/helpdata/en/f7/c2953fc405330ee10000000a114084/content.htm
Also read thru this link for message level security - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d024ca8e-e76e-2910-c183-8ea4ba681c51
Also find soeminformation in these links
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/882a40ce93185de10000000a1550b0/frameset.htm
/people/aparna.chaganti2/blog/2007/01/23/how-xml-encryption-can-be-done-using-web-services-security-in-sap-netweaver-xi
Thanks
Swarup

How to test HTTP request for Sender SOAP Channel

Hi all,
We are testing Soap requests from SOAP UI tool.
We are able to call HTTPS calls from SOAPUI tool, but unable to call HTTP request.
we eanbles ssl and able to post https requests.
please advice .
Thanks
RGDASARI

Hi Stefan, I configured the way you have put it, but I get the error "no receiver could be determined"
Here are my settings:
Sender service - HTTP_SEND
sender o/b interface - PROD_MSG_INT_OB_ASYNC
receiver service - FILE_RECEIVE
receiver i/b interface - PROD_MSG_INT_IB_ASYNC
receiver communication channel - FILE adapter
JAVA script:
String Party       = "MFC";
String Service     = "HTTP_SEND";
String XINameSpace = "mfc%3Anamespace1";
String Interface   = "PROD_MSG_INT_OB_ASYNC";
String Url   = "http://nemo:8000/sap/xi/adapter_plain?";
XML DATA File:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:PRODUCT xmlns:ns0="mfc:namespace1">
<ID>E</ID>
<NAME>thank god</NAME>
<BRAND>SOME BRAND</BRAND>
</ns0:PRODUCT>
Stefan Am I missing anything?
XML error message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
It would be great if you have solution for this.
Regards
felix

HTTP GET for sender adapter possible ?

I have to get XML-messages from third party webservice. I should use HTTP GET to get the data but is this possible in XI ? I mean like RFC->XI->HTTP(GET) and I would process the response from HTTP GET call.

Hi Jari,
For getting response from web service, you should use SOAP adapter.
Anyways,if it for web application, you can use HTTP get in XI for synchronous communication.
Have a look at these blogs for details -
1. /people/amol.joshi2/blog/2006/06/28/must-fire-a-http-get-from-xi---try-this
2. /people/william.li/blog/2007/09/07/posting-and-testing-using-xipi-http-adapter
Regards,
Sunil Chandra

System date in file name for Sender Configuration

Hi all,
I need to retrieve some files every day from my source directory, using the system date as a mask for the filename. Is it possible to do any kind of dynamic configuration for Sender Adapter? I only need to read the files with the current system date every day.
Thanks in advance.

Hi,
><i>
only need to read the files with the current system date every day.</i>
Sorry failed to see this.
Not currently possible without workarounds in XI.
1. Use a Staging folder where the senduing system will put the files. Write a shell script which will move only the current date files to the folder on which XI is polling. Here , you can use wild card characters.
2. Module option , not sure how it will work. You will be doing an I?O inside the module code and this is not recommended. Also, what will be the trigger for your interface if you are planning to use a module to read the files on the basis of System Date.
Regards
Bhavesh

ALE Configuration for PEXR2002 IDoc and PAYEXT message type sending to XI

Hi all,
I need ALE Configuration for PEXR2002(Basic Type) IDoc , it's message type PAYEXT.
I don't know ALE Configuration for sending data from SAP IDS to SAP XI.????
I need ALE Configuration doc/pdf??
Please give me some guidline for this..
Regards,
Umesh

Umesh,
I was wondering if you have had any luck creating the configuration for PEXR2002 Idoc, PAYEXT message types, and sending the result set to XI.
I need to perform the same task within our R3 environment using the FTP protocol in XI to send the file to the Bank to be processed.
Any help or direction would be great.
Thanks,
Dave

API for sending an SMS

Is there an API for sending an SMS from a Mac to a cellphone, similar to what iChat does

IIRC there are a few API's that tie in to their HTTP services for sending SMS. An old colleague had used http://sourceforge.net/projects/smstools/

BODS 3.1 :SMTP configuration to send email for success or failure of job

Hi.
This is further to this post : http://forums.sdn.sap.com/thread.jspa?threadID=1965129&tstart=0
Thanks to all for the help.
I did not find a complete set of information as things to do (for a person who is new to BODS).
Hence sharing the workflow which works for me when tested on a simple workflow :
Pre-requisite : SMTP service to be made available on the BODS server and port 25 to be opened up.
This is done by the IT dept of the company.
When smtp service is activated and port 25 is opened up, telnet IP address 25 should say, service is available.
Suggestion : create a email group like : bods at company.com which can be used to be used for the BODS JOBs. Which does not prompt for a password. This also is done by the IT dept of the company.
1) On the BODS server :
1) Click open Data Services Server Manager
2) SMTP settings for smtp_to functions :
Add the IP Address of the SMTP server
Add the email address of the sender. Eg. bodsjobs at companyname,com
3)Apply/Restart the server.
2) Login to BODS Designer :
Create a test job :
TRY ==>DF===> Script for success ===> CATCH script for failure
In the script for success : add the following :
print (' IN TRY BLOCK Before email ' );
smtp_to('bodsjobs at abc,com', ' SUCCESS OF JOB : '
|| job_name(),'Job completed successfully ', 0, 0);
print('After Email ');
In the script for Catch add the following :
print (' IN CATCH BLOCK Before email ' );
smtp_to('bodsjobs at abc,com', 'FAILURE OF JOB : '
|| job_name(),
error_number( ) || 'Error message: ' || error_message( ) ||
'check details', 50, 50);
print('After Email ');
Note : In the catch : select all exceptions on the check box.
Save all.
Click on the job and say execute.
The job will run and if it is successful. You will receive the succes mail.
If there is any error in the DF before the catch, you will receive a mail, which says failure.
The above workflow, when tested atleast works for me.
Hope this helps.
Regards
indu

Hi Arun.
Am really not aware as to how to make things work from the console.
I work on windows environment both at client and on the server.
It looks like you got a bit confused on suggestion of a email group account.
I never did anything on outlook configuration for activation of smtp for bods.
I think you should not mess with outlook.
I dont know from the client side how things work.
But i have worked directly on the BODS server where the bods installation was done.
It is relatively very simple to do and to test.
But to even test why you get that error.
All you need is just a email id. Which could be yours ???
Put your email id as the source of email in that box in the job server.
And put only your email id in smtp_to and test it.
Run a test job. If it completes successfully. You will receive a mail.
In the catch, if you have checked all the boxes for error capture,
if the job fails, it would throw a dump of the errors in the email.
Once everything works well and you receive emails for any jobs you are running.
Then you could decide for the source of your email id and for the receipients of your emails of the jobs.
You could put a group id of your team as source. And also in smtp_to script in case you want everyone to receive the alert that the job has been done or it has errors.
Or include only those email ids in the smtp_to whom you feel, should receive the mail.
Hope this idea helps.
Please dont mess with outlook for any smtp activation for bods.
It is not required if you are working on a windows environment.
You just need a email id for testing.
Outlook configuration does not come into picture at all.
if there is any other unix environment involved. I have no idea.
And i really do not know how things would be from a client side to configure.
Server configurations i do from the server.
I did all configurations on the main server machine. Not from the client.
And I have only one job server so i did everything there.
I did not do anything from management console.
I use management console only for monitoring of jobs on a daily basis, the dashboard which gives you details of the data pulled, time taken etc etc.
cheers
indu.
Edited by: Indumathy Narayanan on Oct 22, 2011 8:05 AM
Edited by: Indumathy Narayanan on Oct 22, 2011 8:09 AM
Edited by: Indumathy Narayanan on Oct 22, 2011 8:17 AM
Edited by: Indumathy Narayanan on Oct 22, 2011 8:18 AM

Integrated Configuration- Problem occurred in receiver agreement for sender

Hi , I am using AAE in PI 7.1 and it is proxy to file scenrios.
When Ia m doing testing in Integration Directory in test configuration its giving me this error .
Problem occurred in receiver agreement for sender -<ECCBUSINESSSYSTEM> to receiver -BS_D_EPS,http://abc.com/sap/pi/HR/Qualifications.Qualifications_Async_Out: No receiver agreement found for , -<ECCBUSINESSSYSTEM> , BS_D_EPS, http://abc.com/sap/pi/HR/Qualifications, Qualifications_Async_Out
( here it should take interface Qualifications_Async_In, but logs says it is pointing to outbound interface)
here when I am going in to trace logs then it seems that are not able to understand the receiver interface . rather then it is taking sender inface in logs..
In trace logs . I am getting
Receiver Determination
<Not found>
<Trace level="1" type="B">CL_RD_PLSRV-ENTER_PLSRV</Trace>
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N </Trace>
<Trace level="1" type="T"> Cache Content is up to date </Trace>
<Trace level="2" type="T">Start with given receiver - BS_D_EPS </Trace>
<Trace level="2" type="T">Using Receiver Determination 00000000000000000000000000000000 </Trace>
<Trace level="1" type="T">No Relation found - accept given Receivers. </Trace>
<Trace level="2" type="T">...extracting Receiver from Header: BS_D_EPS </Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules. </Trace>
<Trace level="3" type="T">...create rule engine </Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0 </Trace>
<Trace level="2" type="T">Number of Receivers:1 </Trace>
<Trace level="1" type="E">CL_RD_PLSRV-ENTER_PLSRV</Trace>
Interface Determination
<Not found>
<Trace level="1" type="B">CL_ID_PLSRV-ENTER_PLSRV</Trace>
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N </Trace>
<Trace level="1" type="T"> Cache Content is up to date </Trace>
<Trace level="1" type="T">...There is no Interface Determination configured for receiver party and receiver service BS_D_EPS </Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) BS_D_EPS Qualifications_Async_Out </Trace>
<Trace level="2" type="T">...valid InbIf without Condition: Qualifications_Async_Out </Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1 </Trace>
<Trace level="1" type="E">CL_ID_PLSRV-ENTER_PLSRV</Trace>
Operation Mapping
<Not found>
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
<Trace level="2" type="T">......attachment XI_Context not found </Trace>
<Trace level="3" type="T">Mapping already defined in interface determination </Trace>
<Trace level="1" type="T">No mapping configured </Trace>
<Trace level="1" type="E">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
I have developed the other integrated configuration scenario and this is working fine .
please let me know how can I troubleshoot it

I am using sender as Soap and receiver as File adapter.
here the problem is that while going for interface deteremination and receiver agreement it is calling to Outbound interface .
It should call the inbound interface. I put all the details correctly and deleted all the objects and crated again for both Ir and Id..
I put the name of inbound interface in configuration but while executing its calling outbound interface.

Configure plain http adapter for receiving message from an external system

Hi,
we use Pi/700.
Now I have an external system and I have to use HTTP (plain) to send messages to XI (via plain http adapter).
I have no experiences with HTTP!
In the external system I can only configure "URL, Username, Password" for sending messages - that's all!
What do I have to configure in XI (communication channel, abap-stack, java-stack,...)?
I don't know the URL of my XI-system. Is there an transaction code to get this information?
Why do I need a Username/Pasword?
For testing I can use a "http-post test tool" I found here in this forum.
Thank you all for any help!
Regards
Wolfgang

Hi Hummel,
In Exteranl System u have to use these values
name="myhost"      value="xiserver"
name="myport"      value="8000"
name="mysystem"    value="XY_BSservice"
name="myinterface" value="Order_out"
name="mynamespace" value="urn:xi:hcl:powebapp"
name="myqos"       value="BE"
name="myclient"    value="300"
name="myuser"      value="XYZCLNT"
name="mypass"      value="xiuser"
Here My system is the Business service created in Integration directory of XI, Interface is the one created in Integration Repository (This is Outbaound from external sys to XI)
In XI U have to create
Data Types : 1) Source Structure data type(from extenal sys)
             2) Target structure (where u want to send from XI)
Message Types : 2 with above DT's
Message Interface: 1) Outbound, Async (Order_out)
                   2) Inbound , Async (for the target sys)
Then Message mapping and Interface mapping as usual..
And in ID u have to create 2 services one is XY_BSservice for sending system and the other is for receiving system...
For sending system no communication channel required...
Hope u will get idea from the above..
Need any further u r welcome..
Regards
Sridhar

Why v r not configuring IDoc & HTTP adapters on sender side

Hi Gurus,
Y v r nt configuring the Idoc and HTTP adapter on sender side.
But on d receiver side v r configuring. Why?
IDoc and HTTP Adapters are built on ABAP stack.That's y v r nt configuring on d sender side.It is the same thing also on d receiver side also.But y v r configuring on reciever side.
Could u guide me.

Hi Kumar,
Check this thread for your query
Adapters
IDOC adapter resides on Integration server, so Integration engine takes care of the conversion format from IDOC to XML
but in but XML to IDOC is done by Receiver IDOC adapter
Sachin
Edited by: Sachin Dhingra on Jan 10, 2008 4:03 PM

Https configuration For sender

Similar Messages

Maybe you are looking for