HttpWebRequest_WebException_RemoteServer error when opening MDS Explorer and Excel addin also throws an error
HI,
I am facing a big problem every now and then and It is intermittent is what i have seen.
I keep getting be bleow error messare on my MDS Explorer. I am having MDS2012 installed both UI and excel addin gives error
My machine is a 2008 R2 Enterprise Web Server x64
I have checked my Authentication settings, and Windows Auth is enabled for the site and for Services folder and so is Anonymous on Services folder.
The error happens both on the machine itself and from a client machine.
The Same time excel addin throws the below error
But when do a complete Restart of the server or Do a IISRESET on the server by going to >> RUn >> IISRESET ,
it starts working back normally. But this keeps happening very often. How to solve this . It is getting irritating for customers to use it. Please help.
This is the log details say:
===================================
The requested service, 'http://ausapexweb01:81/service/service.svc/bhb' could not be activated. See the server's diagnostic trace logs for more information.
Program Location:
Server stack trace:
at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeEndService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at Microsoft.MasterDataServices.AsyncEssentials.AsyncResultBase.EndInvoke()
at Microsoft.MasterDataServices.AsyncEssentials.AsyncExecuter`1.EndExecute(IAsyncResult ar)
at Microsoft.MasterDataServices.ExcelAddInCore.ConnectionManager.<>c__DisplayClasse.<TestConnectionAsync>b__c(IAsyncResult ar)
at System.Threading.Tasks.TaskFactory.FromAsyncCoreLogic(IAsyncResult iar, Action`1 endMethod, TaskCompletionSource`1 tcs)
Hi Tejaswini,
Please refer to the following article to troubleshoot this issue:
http://blogs.technet.com/b/beatrice_popa/archive/2013/01/31/master-data-services-issue-with-https-error-message-httpwebrequest-webexception-remoteserver-arguments-notfound-debugging-resource-strings-are-unavailable.aspx
Regards,
Elvis Long
TechNet Community Support
Similar Messages
-
Error in /Service/Service.svc/bhb when open MDS Explorer
Hi! I get stuck when opening the MDS Explorer on MDS Server and already tried all suggestions from forums but have no progress.
I append my Environment, Log(IIS, MDS, Fiddler, UI) , and related config.
Hope you could give me some advice. Thank you!
Environment
OS : Windows Server 2008 R2SQL : Microsoft SQL Server 2012 - 11.0.2100.60 (X64)
Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
IIS7
Silverlight (64 bit) 5.1.20513
Browser : IE9 , FF22, Chrome 28
MDS Server is installed on VM, in Windows Domain
Login user has system administration permission.
Application Pools Setting
MDS Application
(a) Managed Pipeline Mode = Integrated
(b) Identity = ApplicationPoolIdentity,
UI Error Message
When opening MDS Explorer, the UI popup error messages like this.
First error message window
WebException: [HttpWebRequest_WebException_RemoteServer]
Arguments: NotFound Debugging resource strings are unavailable
Second error message window (only show up in Firefox)
System.Reflection.TargetInvocationException: [Arg_TargetInvocationException]
Fiddler Log
seems I don't have permission to access the request URL : mdsdev:88/Service/Service.svc/bhb
HTTP Error 401.2 - Unauthorized
You are not authorized to view this page due to invalid authentication headers.
Detailed Error Information
Module IIS Web Core
Notification AuthenticateRequest
Handler svc-Integrated-4.0
Error Code 0x80070005
Requested URL http: // mdsdev:88/Service/Service.svc/bhb
Physical Path C:\Program Files\Microsoft SQL Server\110\Master Data Services\WebApplication\Service\Service.svc\bhb
Logon Method Not yet determined
Logon User Not yet determined
Failed Request Tracing Log Directory
C:\inetpub\log
IIS Log
bhb again, not sure how to access it.
/Explorer/AttributeSL.aspx MID=1&VID=1&EID=3
/Service/Service.svc/bhb
2013-07-21 13:14:24 W3SVC2 fe80::208e:fa0c:31e5:901%10 GET /ScriptResource.axd d=jzBYvlgjGckxbHmd645HrUCsak8pPcTsujxzxXp5gfykwH0og-wOaIEfQRCkVtHUZaU9O-WZs75NSCtNmb4qyzx09zzgZlqq_Hxfv_GJZEA_V7wJtJkFpfiSaTBMqU17icKQwTLbTKf4fmtiRlbLYQ2&t=ffffffffb9f9f042 88 domain\nick fe80::208e:fa0c:31e5:901%10 HTTP/1.1 Mozilla/5.0+(Windows+NT+6.1;+WOW64;+rv:22.0)+Gecko/20100101+Firefox/22.0 mdsdev:88 200 0 0 1
2013-07-21 13:14:26 W3SVC2 fe80::208e:fa0c:31e5:901%10 GET /Explorer/AttributeSL.aspx MID=1&VID=1&EID=3 88 domain\nick fe80::208e:fa0c:31e5:901%10 HTTP/1.1 Mozilla/5.0+(Windows+NT+6.1;+WOW64;+rv:22.0)+Gecko/20100101+Firefox/22.0 mdsdev:88 200 0 0 326
2013-07-21 13:14:27 W3SVC2 fe80::208e:fa0c:31e5:901%10 POST /Service/Service.svc/bhb - 88 domain\nick fe80::208e:fa0c:31e5:901%10 HTTP/1.1 Mozilla/5.0+(Windows+NT+6.1;+WOW64;+rv:22.0)+Gecko/20100101+Firefox/22.0 mdsdev:88 500 0 0 157
MDS Log
Only first two rows mention error, cannot figure out what they mean.
MDS Error: 0 : Service started successfully, Assembly version: 11.0.0.0, file version: 11.0.2100.60 ((SQL11_RTM).120210-1917 )
DateTime=2013-07-21T13:26:55.2677163Z
MDS Error: 0 : ApiContractVersion: 5102
DateTime=2013-07-21T13:26:55.2686929Z
MDS Start: 1 : Service.InitializeExpirationStatus
My Settings
Authentication
(a) MDS Website : Enable Windows Authentication. Disable Anonymous Authentication.
Under Windows Authentication > Advanced Settings > set Extended Protection = Accept or Required
(b) Service Folder : Enable Windows Authentication. Enable Anonymous Authentication.
Web.config :
In MDS Web.config, add policyEnforcement = WhenSupported
My Web.config
<system.serviceModel>
<behaviors>
<serviceBehaviors>
<behavior name="mdsWsHttpBehavior">
<serviceMetadata httpGetEnabled="true" httpsGetEnabled="false" />
<serviceDebug includeExceptionDetailInFaults="false" />
<serviceThrottling maxConcurrentSessions="400" />
<dataContractSerializer maxItemsInObjectGraph="999999999" />
</behavior>
</serviceBehaviors>
</behaviors>
<bindings>
<wsHttpBinding>
<binding name="mdsWsHttpBinding" maxBufferPoolSize="2147483647" maxReceivedMessageSize="2147483647">
<readerQuotas maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxDepth="2147483647" maxNameTableCharCount="2147483647" maxStringContentLength="2147483647" />
<security mode="Message">
<message clientCredentialType="Windows" />
<transport clientCredentialType="Windows">
<extendedProtectionPolicy policyEnforcement="WhenSupported" />
</transport>
</security>
</binding>
</wsHttpBinding>
<basicHttpBinding>
<binding name="mdsBasicHttpBinding" maxBufferPoolSize="2147483647" maxReceivedMessageSize="2147483647">
<readerQuotas maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxDepth="2147483647" maxNameTableCharCount="2147483647" maxStringContentLength="2147483647" />
<security mode="TransportCredentialOnly">
<transport clientCredentialType="Windows" />
<extendedProtectionPolicy policyEnforcement="WhenSupported" />
</security>
</binding>
</basicHttpBinding>
</bindings>
<services>
<service behaviorConfiguration="mdsWsHttpBehavior" name="Microsoft.MasterDataServices.Services.Service">
<endpoint binding="wsHttpBinding" bindingConfiguration="mdsWsHttpBinding" bindingNamespace="http://schemas.microsoft.com/sqlserver/masterdataservices/2009/09" contract="Microsoft.MasterDataServices.Services.ServiceContracts.IService"
/>
<endpoint address="bhb" binding="basicHttpBinding" bindingConfiguration="mdsBasicHttpBinding" bindingNamespace="http://schemas.microsoft.com/sqlserver/masterdataservices/2009/09" contract="Microsoft.MasterDataServices.Services.ServiceContracts.IService"
/>
</service>
</services>
</system.serviceModel>
My applicationHost.config
<location path="MDS">
<system.webServer>
<security>
<authentication>
<basicAuthentication enabled="false" />
<windowsAuthentication enabled="true" useKernelMode="true">
<extendedProtection tokenChecking="Allow" />
</windowsAuthentication>
<anonymousAuthentication enabled="false" />
</authentication>
</security>
</system.webServer>
</location>
<location path="MDS/Service">
<system.webServer>
<security>
<authentication>
<basicAuthentication enabled="false" />
<anonymousAuthentication enabled="true" />
<!--anonymousAuthentication enabled="true" userName="" /-->
<windowsAuthentication enabled="true" />
</authentication>
</security>
</system.webServer>
</location>
Hi! Elvis,
Thanks for your response , I try those settings but still not work. The current IIS setting is as below
Authentication :
(a) MDS Website : Enable Windows Authentication. Disable Anonymous Authentication.
Under Windows Authentication > Advanced Settings > set Extended Protection = Accept or Required
(b) Service Folder : Enable Windows Authentication. Enable Anonymous Authentication.
I trace by Fiddler
and Green arrows point out the bad request when I access Explorer.
Detail error is https://dl.dropboxusercontent.com/u/12915406/MDS/fiddler-log.html
HTTP Error 401.2 - Unauthorized is still the same even apply the suggestions from the links you provided.
I wonder what \Service.svc\bhb is , find bhb in Web.config and set some Authentication to None to test if I can bypass it.
Now the Fiddler has different error.
a:DestinationUnreachable
The message with To 'http://mdsdev.tw.companynet.org:88/Service/Service.svc/bhb' cannot be processed at the receiver, due to an AddressFilter mismatch at the EndpointDispatcher. Check that the sender and receiver's EndpointAddresses agree.
This link has similar problem but I have no idea where I can apply his workaround in my environment.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/b5ae495b-f5fb-4eed-ae21-2b2280d4fec3/address-filter-mismatch-wcf-addressing
Append my Web.confg and applicationHost.config snippet for your reference.
Thank you so much!
Web.Config
<system.serviceModel>
<behaviors>
<serviceBehaviors>
<behavior name="mdsWsHttpBehavior">
<serviceMetadata httpGetEnabled="true" httpsGetEnabled="false" />
<serviceDebug includeExceptionDetailInFaults="false" />
<serviceThrottling maxConcurrentSessions="400" />
<dataContractSerializer maxItemsInObjectGraph="999999999" />
</behavior>
</serviceBehaviors>
</behaviors>
<bindings>
<wsHttpBinding>
<binding name="mdsWsHttpBinding" maxBufferPoolSize="2147483647" maxReceivedMessageSize="2147483647">
<readerQuotas maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxDepth="2147483647" maxNameTableCharCount="2147483647" maxStringContentLength="2147483647" />
<security mode="Message">
<message clientCredentialType="Windows" />
<transport clientCredentialType="Windows">
<extendedProtectionPolicy policyEnforcement="WhenSupported" />
</transport>
</security>
</binding>
</wsHttpBinding>
<basicHttpBinding>
<binding name="mdsBasicHttpBinding" maxBufferPoolSize="2147483647" maxReceivedMessageSize="2147483647">
<readerQuotas maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxDepth="2147483647" maxNameTableCharCount="2147483647" maxStringContentLength="2147483647" />
<security mode="None">
<transport clientCredentialType="None" />
</security>
</binding>
</basicHttpBinding>
</bindings>
<services>
<service behaviorConfiguration="mdsWsHttpBehavior" name="Microsoft.MasterDataServices.Services.Service">
<endpoint binding="wsHttpBinding" bindingConfiguration="mdsWsHttpBinding" bindingNamespace="
http://schemas.microsoft.com/sqlserver/masterdataservices/2009/09" contract="Microsoft.MasterDataServices.Services.ServiceContracts.IService" />
<!--Silverlight doesn't support wsHttpBinding -->
<endpoint address="bhb" binding="basicHttpBinding" bindingConfiguration="mdsBasicHttpBinding" bindingNamespace="http://schemas.microsoft.com/sqlserver/masterdataservices/2009/09" contract="Microsoft.MasterDataServices.Services.ServiceContracts.IService" />
</service>
</services>
</system.serviceModel>
applicationHost.config
<location path="Default Web Site">
<system.webServer>
<security>
<authentication>
<basicAuthentication enabled="false" />
<windowsAuthentication enabled="true" useKernelMode="true">
<extendedProtection tokenChecking="Allow" />
</windowsAuthentication>
<anonymousAuthentication enabled="true" />
</authentication>
</security>
</system.webServer>
</location>
<location path="MDS">
<system.webServer>
<security>
<authentication>
<basicAuthentication enabled="true" />
<windowsAuthentication enabled="true" useKernelMode="true">
<extendedProtection tokenChecking="Allow" />
</windowsAuthentication>
<anonymousAuthentication enabled="false" />
</authentication>
</security>
</system.webServer>
</location>
<location path="MDS/Service">
<system.webServer>
<security>
<authentication>
<basicAuthentication enabled="true" />
<anonymousAuthentication enabled="true" userName="" />
<!--anonymousAuthentication enabled="true" userName="" /-->
<windowsAuthentication enabled="true" />
</authentication>
</security>
</system.webServer>
</location> -
TS3694 i have error when i install restore and update in file unknown occurred error 1015
i have error when i install restore and update in file unknown occurred error 1015
http://http://support.apple.com/kb/TS3694#error1015 this should help you with your problem.
-
Error when opening Capacity Planner and Performance Manager
Hello,
I am having an error when opening Performance Manager or Capacity Planner under 9i OEM in our environment. I started at the company about 2 months ago, and have not used these tools until yesterday - and just found these errors. Below is a link to a screenshot of the errors. Does anybody have any ideas?
http://www.webgenstudios.com/misc_images/ora1.jpg
Thanks,
-BobWhich are the contents of the log file produced during installation of OEM...????
OEM was installed on its host machine about 4 years ago, long before I started with this company. I don't know if the logs are still there or not. Where should I be looking?
Do all other parts of OEM operate successfully...????
Yes, everything besides Cap Planner & Perf Mgr.
Is this in Standalone Mode or Oracle Management Server Mode?
The issue occurs in both modes. -
I am using Excel 2003 SP3 and have the Office 2007 compatibility pack installed. When I open Office 2007 formatted Excel files (XSLX) directly in Windows Explorer, I receive the following error if I do not have Excel already opened:
"Windows cannot find '<path to file>'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search."
Even though I receive the error, the file does open; however, it opens in Read Only mode with a name such as "Xl0000024.xls". The number seems to increment up each time it happens.
Now here is the strange part. If I have Excel already open and try to open the file in Windows Explorer, the file opens fine in Modify mode with no error and with the correct file name.
I Googled the error I was getting and found KB211494. It says I should uncheck the box in Options on the General tab that says "Ignore other applications", but this box is already unchecked in my case. Any other ideas? This is
really frustrating as a small percentage of our company has upgraded to Office 2007 with the rest still on Office 2003.This may be a file association problem. To solve that:
In Windows 7:
1. Right-click the file,
2. Select "Open With"
select [Your Program Here]
3. Check always use this program.
In Windows XP:
1. Locate the file as you have described above
2. Right click the file
3. Select Open with from the pop-up menu
4. Click Choose default program…
5. Select Excel in the Recommended Programs box
6. Check Always use the selected program to open this kind of file
7. Click on OK.
1. Make Excel not available from Office 2007 listed under Programs and Features in Control Panel.
2. Take a registry backup using the steps given here
3. In the registry editor window expand HKEY_CLASSES_ROOT and navigate to .xls right and delete it.
4. Exit Registry Editor
5. Undo Step 1 to make Excel available.
6. Restart the computer and verify it the issue is fixed.
If this answer solves your problem, please check Mark as Answered. If this answer helps, please click the Vote as Helpful button. Cheers, Shane Devenshire -
FQDN error when opening Alert confi and Alert inbox
Hi PI Gurus,
When I go through RWB & try to open alert config & alert inbox I get an 'Business Server Page (BSP) error'
when I open from sicf I am able to open alert inbox.
How can I open alert config?
Thanks,
KrishnaHi Krishna,
Ref: /people/brian.mckellar/blog/2003/09/25/bsp-in-depth-fully-qualified-domain-names
Ref these weblog;
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Additional Info:
Roles for Alert Management
1. SAP_ALM_ADMINISTRATOR
2. SAP_ALM_CUSTOMIZER
3. SAP_BC_ALM_ALERT_USER
Sap Notes - 913858 and 824039
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/content.htm
Thanks, -
Error when opening/editing a document/excel file in sharepoint
I have a sharepoint site that has Office Web Apps enabled. I am also using MS Office 2010. Can you please help me solve this problem?
Here are my steps when I encounter this error:
1. Click ok the document - this will open the document in the browser
2. In the document (opened in browser) click 'Open in Word' - this will open Microsoft Office Word and will ask for credentials
3. I will enter my valid credentialls - Upon entering my credentials for the first time, it will load the document however, after it loads the document, another login window appears again,
the error here is that it keeps on asking me for credentials, the login window keeps on popping out upon clicking on the OK button, if I click on Cancel it will close the login window.
4. In the office document, click Edit Document - an error will appear saying 'A problem occured while connecting to server'
----------------------- Sharepoint NewbieHi,
Add you site in trusted zone of your IE and
Open Tools/Internet Options/Connections/LAN Settings and uncheck "Automatically Detect Settings"
See this thread for more info:
http://social.technet.microsoft.com/Forums/en-US/sharepointadminlegacy/thread/4667a58c-a42e-44d2-8bb3-75db0aff5ba4
Also try with another browser or in different machine.
Let us know your result
Hemendra: "Yesterday is just a memory,Tomorrow we may never see"
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer -
Hi
I encounter a problem on a windows XP laptop using acrobat 11.0.09.
When i try to open a .pdf document i get an windows error message.
The document open well else, but i get persistent windows error message then, and i get them even if i close this document.
When i look application event i have this :
Nom de l’application défaillante acrord32.exe, version : 11.0.9.29, horodatage : 0xsyntpfcs.dll
Nom du module défaillant : 7.5.19.5, version : 00001599, horodatage : "a long string"
Code d’exception : 0x%7
Décalage d’erreur : 0x%8
ID du processus défaillant : 0x%9
Heure de début de l’application défaillante : 0x%10
Chemin d’accès de l’application défaillante : %11
Chemin d’accès du module défaillant: %12
ID de rapport : %13
I try to uninstall / reinstall acrobat without change, this error message still stay when i open a pdf document.
cordialyHi ,
I solve my problem :
1- chkdsk /f to test the disk => nothing particular
2- I use defraggler to defrag the harddrive ( was very fragmented)
I thing this two step doesn't change anything.
3- then i use Adobe Reader Acrobat Cleaner Tool and restart laptop
4- Reinstall Adobe Reader.
5- I just let reader11.0 folder in c:\program files\Adobe and delete other old reader folder.
6- did same in c:\documents and settings\%username%\application data\adobe\acrobat\
seems to work know
will survey to be sure and back to confirm
thank -
How do I fix a javascript error when opening Dreamweaver?
DW CS6 recently started having 2 JavaScript errors while opening the application and at least 1 additional JavaScript error when using the Insert Image command. Can someone provide some advice on fixing this issue?
This will help -
Index to Dreamweaver FAQ
Look at the very first issue. -
Error when opening User and Group Preferences
After upgrading to Lion there is an error when opening User and Group Preferences.
I´ve repaired permissions but the problem is still there...
Thanks...Hi,
Double click on ur webdynpro application.Go to application properties tab.create new application property,select predefined property->browse->it will open a popup->select expiration time->give the value for expiration time.
or
Refer the note : [842635|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=842635&nlang=EN&smpsrv=https%3a%2f%2fwebsmp206%2esap-ag%2ede]
Hope it helps,
Reward points if helpful.
Regards,
Shailesh Nagar -
Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
My pc is working with windos 8.
Is there a solution?Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling -
Error when opening: "DiscoBrick 1.60. Unable to locate the <> plugin. Repair permissions and retry."
I also got this error this morning. DiscoBrick is just a visual plug-in for itunes that i don't even use, so i just uninstalled it and that solved my problem.
Go to MacHD/Library/iTunes/iTunes Plug Ins/ then delete DiscoBrick.
If you still want it you could try re-installing it again
Glen. -
I am trying to update ipod touch from ios 4.3.2 to ios 6.1.3. I have it connected to my computer, and the summary in itunes indicates the update is available. However, when I click "update", it opens Windows Explorer and waits for a file name to open.
I am not at that computer now, but I did check via windows update & with the check updates menu choice in the itunes program - neither indicated a newer version of itunes is available. (it is a vista computer).
The itunes software on the computer displays my ipod & the current ios (4.3.2), and indicates a newer ios is available (6.1.3). When I choose "update", I am taken to Windows Exploer and prompted to choose a file to open. it is as if the "update" button has the incorrect code attached to it.
The ipod is working, but there are several app I would like to install, but I can't with the current ooperating system. -
I get missing plug-in error when opening my online bill which is in PDF format. I am using a 2010 Macbook with the latest version of Safari and Adobe suite installed in my computer. Why do I get this error? What should I do?
In relation to my previous inquiry regarding inability to view a pdf file using Safari...
Is it possible that I can view other online bills from other website but not this particular bill from one specific website?
Sorry if I missed any important point in this article -->Apple Safari 5.1 and Adobe Reader/Acrobat Advisory
Thanks again! -
I'm getting an error message "There was an error when opening this document. Access denied" on some PDF's that I was able to open in past. Uninstalled XI and installed X but same problem. How can I access these files?
I have exactly the same problem. The interesting thing is that the file opens when I attach it to an email and open it out of the email. I already saw the advice you provided in similar post from Aug last year and checked the security settings of the file and the folder. But according to that I have all rights.
My OS is Windows 7 Enterprise.
Maybe you are looking for
-
Accessing DB synonyms from BPEL - DB Adapter
Hi Gurus I have problem accessing synonyms from BPEL. I am using DB Adapter. SOA Version is 10.1.3.3.0 Schema1: Has procedure with input and output as Table object type. Schema2 : Has synonyms for above procedure and its input/output Table object typ
-
Unable to detect my AP TimeCapsule 3tb on windows 7 64-bit Ultimate
Here is my setup Im from Denmark on a Danish ISP called Telenor I'm getting my internet via their modem a Technicolor TG788vn v2 On that i have a brand new AirPort Extreme setup in bridge mode to be able to relay connection without any issus. On this
-
Just discovered the card reader on my new machine does not read, does not react or anything when I put a card in. I downloaded/installed the drivers for windows8 from Lenovo and no change, tried the device manager update and it says I have the best
-
ERROR - ORA-12801: error signaled in parallel query server P098
Hi Experts, Today one of our developer complained that they are continously getting the below error in their application logs ERROR - ORA-12801: error signaled in parallel query server P098 ORA-01461: can bind a LONG value only for insert into a LONG
-
How to disable keyboard shortcut "Control Shift Down"
Hi, I'm mildly surprised that I couldn't find the answer to this little problem I have. I'm running a PC version of Excel through VMWare under Mac OS X 10.7, and it works perfectly fine except that the keyboard shortcut for selecting continguous cell