HU without inventory management and message L3778 in storage type 999

Hi experts,
Need suggestion on the process to add inventory of an HU with status 'HU without inventory Management'. This issue has occurred out of the below scenario:
1. our warehouse is HU & WM managed.
2. We have a transfer order for a delivery document requesting to pick up 100 cases of MAT1 which is assigned to HU1.
3. While confirming the transfer order user has confirmed difference for the full quantity of 100 because the SU/HU was not found in the bin.
4. The system has set the status of HU as 'HU without inventory Management'. The HU is empty.
5. system has moved the stock from the bin to difference storage type 999.
Now user has found the stock for this HU and he wants to post the stock back into the bin. system does not allow to move the stock back to bin using LT01 as we get error message 'L3 778'.
What will be the best practice to get the stock back into the bin and post the stock into the same old HU.
Is there a process wherein we can post this stock to another bin and repack into the old HU?
Thanks,
Harish

Thanks Manish on the hint. I was able to transfer stock to partner location and then bring back to original Storage type/Bin. Below steps was used to fixed the issue:
1. Initiate a transfer of stock from WM/HU Sloc where the IM stock resides into Sloc 9099. An outbound delivery is created during this process.
2. Create a transfer order with reference to delivery and pick the stock from 999 storage type.
3. Create a Pick HU using LH01 and assign the HU on the pallet to the transfer order.
4. Confirm the transfer order using LT12.
5. Perform PGI for the delivery.
6. Use HUMO to display the HU and then you can transfer the stock back to WM/HU location using the storage location transfer option available on the HUMO screen(EDIT à change HU posting à Storage location)
7. Perform Bin to bin transfer to move the SU from 921 storage type to putaway the HU/SU back to the destined Storage type/Bin.
Best Regards,
Harish

Similar Messages

Handling unit without inventory management

Hi Experts,
In our scenario, we have Goods reciept from production into Storage location 1000 which is IM managed, Later the stocks are transfer posted into storgae location 1100 which is HU/WM managed. Now in 1100 i have found HU's which have been created with status 'Handling unit without Inventory management'.
Can someone explain to me what does it mean when a HU gets created with this status? under which scenario does the system create the HU with this status?
Also when this HU is scanned for putaway the system gives error message Handling unit does not exist in SAP. Can someone let me know the resolution or the root cause for this issue.
Thanks in advance.
Harish

Hi,
The above mentioned status is when a Handling Unit created, but the Inventory management is not yet posted for the content materials of the HU
I can give an example: Created a Inbound Delivery for material XXX. Then a HU is created in Packing screen, but the PGR is not yet done. At this stage, HU has the same status
Hope this helps
If the GR/GI is reported for HU contents, then the HU status will change. With you case, a Handling Unit is just created, but no further tansaction like, packing, GI or GR is done.
Regards,

Inventory management and physical inventory data transfer

hi all,
can anyone plz povide me with inventory management and physical inventory data transfer tutorial or link.
points are guarented.
rgds

The information behind the blue-button for MI34, MI38 (as you mentioned) does not have enough detail. It's basically one-page. Is there another instructional source available? How is the logical file MMIM_PHYSICAL_INVENTORY_DOCUMENTS tied to the physical, can you clarify? Not sure how to determine where the sequential file being processed needs to be located. Thanks!

Difference between inventory management and warehouse management

can any body tell me the difference between inventory management and warehouse management i need atleast five differences

hi
1.
Processes in the area of Inventory Management address the recording and tracking of materials on a quantity and value basis. This includes planning, entry, and documentation of stock movements such as goods receipts, goods issues, physical stock transfers, and transfer postings as well as the performance of physical inventory (stocktaking).
Warehouse Management Processes cover warehouse-internal movements and storage of materials.
2.
SAP Warehouse Management allows you to manage your material flow, using advanced putaway and picking strategies. In the standard system, these strategies for putaway include random putaway (next empty bin), bulk storage, fixed bin, or addition to stock. The picking strategies include standard strategies first-in first-out (FIFO), last-in first-out (LIFO), picking by shelf life expiration date (SLED), or partial quantities first. For customer-specific strategies, solutions can be self-defined in user exits.
3.
While Inventory Management manages the stocks by quantity and value, the Warehouse Management component reflects the special structure of a warehouse, and monitors the allocation of the storage bins and any transfer transactions in the warehouse.
Reward points if helpful

Inventory Management and WBS?

Hi there,
We want to show an inventory management report which contains WBS Hierarchy. It shall look like the following style:
Dimension　　　　　Fact Stock Value
FKSTL
->PROJECT
　->WBS
　　->MATNR　　　　xxx,xxx,xxx
I have activate two InfoCubes, 0IC_C03 and 0PS_C04. What can I do to show the report like that?
Thanks in advance

Hi
Have you uploaded the hierarchy for FKTSL and include this infoobject in your cube......you can execute the report to drilldown based on the hierarchy
Hope this helps
Cheers
N Ganesh

Stop managed server without node manager and admin server

What are the commonly used ways to stop managed Weblogic server without node manager running and without administration server running?
(I have only one solution: on the managed server startup dump process ID to a file, and then when I want to stop it, send a signal to this process ID and kill JVM. But it seems not very clean way.)
(The managed server is started when both node manager and admin server are down, and I provide boot.properties of admin server to the managed server to start.)
UPDATED: And I don't want to start neither admin server, nor node manager even temporarily.
Edited by: user12163080 on Jun 24, 2010 4:40 AM

Hai,
I read the Oracle weblogic wlst script document without Admin server you cannot connect the managed server through the WLST script. see the below lines
"The start command starts Managed Servers or clusters in a domain using Node Manager.
To use the start command, WLST must be connected to a running Administration Server.
To start Managed Servers without requiring a running Administration Server, use the
nmStart command with WLST connected to Node Manager."
"You shut down a server to which WLST is connected by entering the shutdown command
without any arguments.
When connected to a Managed Server instance, you only use the shutdown command to shut
down the Managed Server instance to which WLST is connected; you cannot shut down another
server while connected to a Managed Server instance.
WLST uses Node Manager to shut down a Managed Server. When shutting down a Managed
Server, Node Manager must be running.
In the event of an error, the command returns"
They are two option if you are using adminserver then we can stop the any Managed server.
The option is if you are using the nodemanager without admin server we can stop the any Managed server.
The last final solution to kill the particular Managed server pid.
Regards,
S.vinoth babu

Managing inventory without inventory management

HI Guys,
I have following questions
How do we mange stock in inventory if we have just purchasing and no inventory management.....
when do we create new account assignment cateogry
Please kindly help...

How do we mange stock in inventory
if we have just purchasing and no inventory management..
Above statement is contradictory;
Anyway purchasing with no inventory management,
Create P.O with account assignment - 'K'. While doing GR stock is consumed / expensed out.

What else SCE couldn't do without Collection manager and Subscriber Manager for SCE?

Can we still monitor the traffic and control the subscriber even we do not have any Collection manager and Subscriber Manager? with SCE alone couldn't analysis or control the traffic?

Hi,
Without CM you can not generate reports based on RDR collection process. For example if you dont have Collection Manager you can not generate reports that are predefined on the SCA Reporter or insight. Only you can do is you can poll SNMP counters/values by a s/w and you can graph them, but it is not suitable and not covers the all data that SCE collects and reports. And for the SM side if you want to communicate with a policy/external server you really need an SM, also you can use its internal Quota manager to count quota.

Knowledge Management and Message functionality

Hi all,
i'm looking to develop a solution to provide following functionality
message capabilities we would like to have especific messages for R/3 BW or CRM users also we would like to be able to create messages would be outage messages this messages has the ability to disable connection with backend systems between two dates and display a adverstiment of this some time before
this messages must be visible only for some users base on the team/ roles they have
I never work with KM before and i have some doubts
we would like to know if KM is the right place to store this messages
KM has some templates to post messages with especific structure
can we separate messages base on roles or groups?
this messages has edit functionalities like WYSIWYG editor create messages with Links, bold italic or colors and diferent fonts
also any help about API to manage KM will be great
thanks for your help
any input will be apreciate and rewarded
best regards

Hi Ruben,
About your doubts,
we would like to know if KM is the right place to store this messages
Yes, you can store messages in KM. It is the better place.
KM has some templates to post messages with especific structure
Not sure about this. But, You can have metadata property of type HTML. You can create specific stuctures here.
can we separate messages base on roles or groups?
Yes, Definately.
this messages has edit functionalities like WYSIWYG editor create messages with Links, bold italic or colors and diferent fonts
Yes, While creating messages manually in KM, the tool bar is available for editing such things.
For API's you can refer help.sap.com.
Thanks,
Mehul
Reward points if answer is helpful.

Inventory Management output message

Hi Experts
Currently the output types WE03 & WLB1 is used for plant A with respective logo (smartform).
When rolling out to plant B, (required different logo), inorder to differentiate the output type by plant, should i custom the Table 072 ?
As currently table 072 is Trans/Event Key/Version/print item and if I just create a new output type for this same table in material document for the plant B, both output messages being displayed.
Please advise
MM

Hi
I understood can create another output type and assign the new form to it.
When want to print the mat doc through MB90, both of output types been displayed for both plants and user required to choose manually the correct output type.
I want to make it automatic through config. As currently Table 072 is acces sequence by Trans Even Key/Print Version/ID not seperated by Plant. Thats why wonder whether should be created new custom table and create a new sequence.
Regards
MM

Q&A db for warehouse management and inventory management

Hello Everybody,
i read on the help.sap website that standard as well as industry specific versions of Q&A db are available. but the website doesnt say where. i searched a lot but the links dont lead to the actual Q&A db.
i would like to request you to kindly share the Q&A db for inventory management and warehouse management with me as i need it for preparing the AS IS documentation.(preferably automotive industry but if not then even standard Q&A db is fine).
thanks a lot.
sapman.

Now QADB will not help to map the clinets requirement. Instead of QADB get AS IS information form Coreusers... thats best practice now....
Go through www.sap-img.com for further details...
Edited by: Ganti on Jul 26, 2008 7:26 AM

SAP Inventory Manager 4.0 installation problems

I am having problems when trying to install the new version of Inv Manager 4.0 on windows server 2008. The installation is performed by first installing and patching to latest release an SMP 3.0 server, followed by an installation of the SAP Inventory Manager 4.0.0 Deployment exe file. That installation runs without any errors but no app is visible on the SMP, no folders or shortcuts or other indications are visible that it was successful. Also very strange is that according to the installation guide there are some steps (1-6) which I cannot see, my install runs jumps directly from step 3 step nr. 7 (serial numbers, install type, keys are all missing or not requested by the installation for some reason). I have installed this on 4 different servers/PC´s where at least 2 of those were totally fresh systems that didn´t have any previous installation of either Agentry or SMP. The prerequisites are met (java, jco etc) but what puzzles me the most is that I don´t see any logs or error messages.
Help is much appreciated

Bjorn,
At very high level...
1) Install SMP Server with Latest support pack. you don't need to enter any server serial numbers details.
2) Logon to SMP Management cockpit.
3) create Agentry application for Inventory Manager and save it.
4) Once Agentry application is created under server->configuration folder you can see a folder created.
Server\configuration\com.sap.mobile.platform.server.agentry.application.
5) Execute SAPInventoryMgr400Deployment.exe by entering SAP back end connection details.
6) Once you complete step 5), you have IM 4.0 deployment application is created. at this point you can copy all the deployment folder contents to application folder created in step 4) or do publish from editor or follow step 5.
5) Select Agentry application ->go to App Specific settings tab ->Under publish option "upload your Inventory Manager deployment zip file" and save the changes.
6) Re-start the Server.
7) Test if your application is deployed correctly by entering URL in the browser https ://<hostname>:8081/<appname> . you should get response as 'I'm here".
8) if step 7) is not successful then troubleshoot Agentry app deployment ( turn on agentry logging and check for startup errors ).
check this thread for SMP 3.0 Server Installation troubleshooting.
Query on SMP 3.0 - Working with Agentry Client
Thanks,
Manju.

AFS Inventory Management

What is AFS Inventory Management, an example is
http://help.sap.com/search/highlightContent.jsp
Thanks
Have done a quick google search seems as if it is:
SAP Apparel and Footwear (SAP AFS)
Message was edited by: Niten Shah

Hi,
AFS utilizes wireless bar code scanning to reduce operating and administrative costs while improving efficiency and customer satisfaction.
Working in conjunction with AFS ERP or other back end systems, the combined solution creates an automated, paperless, Warehouse Management System that increases product movement accuracy from vendor receipt to customer invoicing. Employees and managers can update and access highly accurate inventory status and transaction data in real-time using AFS WMS.
AFS WMS improves inventory management and control by significantly reducing paper and manual processes through computerized automation, data accuracy, inventory control, warehouse efficiency and labor productivity. Utilizing the wireless barcode scanning system, all data is seamlessly integrated into the core distribution and financial system.
Also refer: http://www.afsi.com/warehousemgt.asp
assign points if useful ***
ooops!!! well,..I have furnised details about AFS Inventory Management and NOT about SAP AFS ****
anyways, know this as well... may be useful ...
Thanks,
Raj
Message was edited by: Raj

Urgent-Inventory Management in case of a glass or ply industry

A typical scenario.
I am facing a problem in inventory management for a client of mine who is into glass cutting and supply. The glass sheets are purchased in sheets from the vendor and is cut into various shapes and dimensions according to the order recieved by him. now in most of the cases the entire sheet is not used in a particular order. the remaining part which is not used goes to the inventory. Now for a next order all the remaining part may be used if it matches the lengthXBreadth specifications. So the inventory items should show the length X Width specification. The dimensions are not fixed and there may be "n" number of variables.
Example- A default sheets of sizes 10"X10" is purchased form vendor. Seperate shapes of 6"X4" and 4"X 4" is cut out from it. Then the remaining part will have a dimension of 6"X10", which goes to the inventory. Now whenever he will see te inventory report he should be able to see that 1qunty of 6"X10" is ther in the inventory. So that when if he recieves an order of 6"X8" or 6"X10" he can use that and save cutting a new sheet (10"X10"). This will minimise the wastages.
I had planed to do it by the area but then that does not solve the perpose as the inventory total will show the sum area of all the dimensions in the inventory in "sq@units". Makong item masters for different dimensions will involve a huge inventory management and the users may land up in making numerous masters evry day and also risk of the duplication of the same masters will prevail.
Please anyone who has done any implementation for such clients or of similar type or any one having a suitable solution to this issue........please help!!!

Debraj,
In that case the option you could try is to enable batches and store the size as a batch number
For example: The inventory could have 10 pieces of item A
Qty......Batch
..2.......6x10
..3.......6x8
..5.......6x6
Now when ever you want to add a cut piece of item A which is of size 6x10, you simply enter Batch 6x10 and this will not only increase stock by1 but also you now the visiblity of what the stock is made up of by running the Batch report.
If you want to do it in a much better way then you need to probably go with an AddOn
Suda

Inventory Management - BADI

Good day,
Currently the Inventory Management extractors(2LIS_03_BF, 2LIS_03_BX, 2LIS_03_UM) only extracts Local Currency. We would like to extract the values in Group Currency as well. Doing currency translations is not an option for several business reasons. We have to have the Group currency as it appears in the Material Ledger. I debugged the standard extractor for Inventory management and noticed that the extractor caters for a BAdI(Business Add In). Can anyone please give me an indication where I can look for this BAdI. I looked on SPRO on R/3 and there is a list of BAdI's under BW, but I don't know which one to use and how to use it. I would appreciate help in this regard.
Thank you.
Regards.
Verushca Hunter

Hi dear and welcome on board !
I think you have to fill your additional field in the usual exit provided for customer enhancement (RSAP0001) in CMOD transaction, EXIT_SAPLRSAP_001 in the include ZXRSAU01...
Otherwise you can go fot the new RSU5_SAPI_BADI...
Hope it helps!
Bye,
ROberto
...and please don't forget to reward the answers...it's THE way to say thanks here !

HU without inventory management and message L3778 in storage type 999

Similar Messages

Maybe you are looking for