Huey pro issue, almost resolved, but, not quite

This machine and windows 7 are not a match made in heaven. Love the operating system, but, its totally a pain with the W700 stuff. I have fully updated *everything*, it beeps like it is calibrating, it says its finished and successful, but, it doesn't do a thing. I have had this machine since 2009 and its always an issue after a clean reinstall of windows. this time worse than usual. This was working absolutely perfectly until I reinstalled windows. Yes, I have the latest driver. (heck, its taken a ton just to get it to work at all!) I know it is a minor little software error but for the life of me I cannot figure out what

Yes, you can switch it and it may be that my judgement is bad. I went in and messed up the color and it did change it. I think the monitor I am on is too warm and that may be affecting my perception on the Lenovo being too cool. I am going to mess with it some more this evening. Its my favorite feature on the w700

Similar Messages

Window Manager delimma! TWM is almost perfect, but not quite :(

Hi,
I guess I should start out by saying I'm pretty new to Linux, so I'm not experienced with all the DEs and WMs out there. I've trief (very briefly) KDE, Xfce, and Openbox, but honestly none of them really got me as excited as TWM. I've spent hours writing my own .twmrc from scratch, and I love it... unfortunately, there seem to be a few critical things things that TWM just won't do. These are listed below in descending order of importance to me:
* task-switching (alt+tabbing): I've been able to do something simple with this using f.forwiconmgr to switch focus, and I like it fine; the only problem is that I can't make it raise the windows, too. I tried a function {f.forwiconmgr f.raise}, but for some reason it would raise the CURRENT window before switching focus to the next.
* maximize (or fullzoom) on double-clicking the titlebar.
* I have one TitleButton which fullzooms on being clicked. For some reason there's an issue where after clicking it, the next click anywhere in TWM's domain will be ignore and changes the cursor to a tiny mouse icon. I have no idea why, and I haven't been able to get around it.
* fullzoom margins: I have my icon manager at the bottom of the screen and an xclock, almost like a taskbar which blends in with the background. I don't like maximized windows blocking them.
* I'd really like to be able to force certain windows to always be in the back. This is mainly because my icon manager and xclock are colored to look like they're part of the background, but I guess if the previous one is satisfied this becomes less important.
* I can't (or haven't figured out how to) make windows raise to the top when you click within them. If I write a line to f.raise when clicking in the window, then TWM consumes the click-signal and it never reaches the window. This is at the bottom because I'm already learning to live with this, and could even see myself starting to appreciate it as a feature before long.
I suppose what I'm asking for is either a solution to these issues with TWM, or suggestions for an alternative WM that will do all of these plus what I like so much about TWM. Of what I've tried, I liked Openbox the most, but having to customize it in xml and its themes kind of turned me off. At the bottom you'll find a link to a screenshot of my current TWM setup, just for some idea if what I'm getting at. I just don't know what to do! I've become very attached to TWM, but also very put off by its flaws.
Thanks!
http://www.bellsouthpwp.net/C/o/Correct … sariss.png

Hello!
I'm trying TWM.
It's rather interesting.
With my .twmrc, I can switch between windows pressing Alt + F3, and then Alt + F11 or F12 to select which window, and then Alt + F9 to raise it, or Alt + F10 to deiconify it.
If several windows are deiconified, I can switch pressing Alt + F1.
I made several keyboard shortcuts to start programms, to handle windows, etc…
With vdesk I have multiple desktops. I set Ctrl + F1-4 to switch to a desktop to anothers.
I made a menu with some programs I use often, but I must add some programs.
I use slim as login manager. I have the slim picture as background. It's good.
I wonder if I won't continue to use twm. It's rather nice, and well made.
Here is the .twmrc I modified:
# $XConsortium: system.twmrc,v 1.8 91/04/23 21:10:58 gildea Exp $
# A little $HOME/.twmrc by Thomas Eriksson [email protected]
# Modified (just colors and some menu options) by Istvan Keppler [email protected]
# twm... the original and the best...
NoGrabServer
#NoDefaults
RestartPreviousState
DecorateTransients
TitleFont "-adobe-helvetica-bold-r-normal--*-120-*-*-*-*-*-*"
ResizeFont "-adobe-helvetica-bold-r-normal--*-120-*-*-*-*-*-*"
MenuFont "-adobe-helvetica-bold-r-normal--*-120-*-*-*-*-*-*"
IconFont "-adobe-helvetica-bold-r-normal--*-100-*-*-*-*-*-*"
IconManagerFont "-adobe-helvetica-bold-r-normal--*-100-*-*-*"
#ClientBorderWidth 2
BorderWidth 3
ButtonIndent 2
NoHighlight
AutoRelativeResize
#DefaultBackground
FramePadding 0
#ForceIcons
NoRaiseOnMove
OpaqueMove
Zoom 500
# This is for hiding the ugly menubar in windows who dont need em.
NoTitle
# "x11amp" # x11amp, the winamp lookalike, http://x11amp.ml.org.
# "xlogo" # a must have :)
"xosview"
Color
BorderColor "gray85"
DefaultBackground "black"
DefaultForeground "gray85"
TitleBackground "black"
TitleForeground "#4CD49E"
MenuBackground "black"
MenuForeground "gray85"
MenuTitleBackground "gray65"
MenuTitleForeground "black"
IconBackground "black"
IconForeground "white"
IconBorderColor "black"
IconManagerBackground "black"
IconManagerForeground "gray85"
PointerForeground "black"
PointerBackground "white"
# Define some useful functions for motion-based actions.
MoveDelta 1
Function "move-or-lower" { f.move f.deltastop f.lower }
Function "move-or-raise" { f.move f.deltastop f.raise }
Function "move-or-iconify" { f.move f.deltastop f.iconify }
# Set some useful bindings. Sort of uwm-ish, sort of
# simple-button-ish
Button1 = : root : f.menu "prg"
Button2 = : root : f.delete
Button3 = : root : f.menu "window"
Button1 = m : window|icon : f.function "move-or-lower"
Button2 = m : window|icon : f.iconify
Button3 = m : window|icon : f.function "move-or-raise"
Button1 = : title : f.function "move-or-raise"
Button2 = : title : f.raiselower
Button3 = : title : f.iconify
Button1 = : icon : f.function "move-or-iconify"
#Button2 = : icon : f.destroy
Button3 = : icon : f.iconify
Button1 = : iconmgr : f.iconify
Button2 = : iconmgr : f.destroy
Button3 = : iconmgr : f.iconify
"F1" = m : window : f.lower
"F3" = m : all : f.showiconmgr
"F2" = m : all : f.hideiconmgr
"F4" = s : window|icon : f.fullzoom
"F5" = m : window|icon : f.bottomzoom
"F6" = m : window|icon : f.topzoom
"F8" = m : window|icon : f.rightzoom
"F7" = m : window|icon : f.leftzoom
"F9" = m : window|icon : f.raise
"F10" = m : all : f.iconify
"F10" = s : all : f.deiconify
"F11" = m : all : f.downiconmgr
"F12" = m : all : f.upiconmgr
"F4" = m : window|icon : f.delete
"F1" = c : all : f.exec "vdesk 1 &"
"F2" = c : all : f.exec "vdesk 2 &"
"F3" = c : all : f.exec "vdesk 3 &"
"F4" = c : all : f.exec "vdesk 4 &"
"F5" = c : all : f.exec "sakura &"
"F6" = c : all : f.exec "thunar &"
"F7" = c : all : f.exec "icecat &"
"F8" = c : all : f.exec "sylpheed &"
"F9" = c : all : f.exec "gimp &"
"F10" = c : all : f.exec "libreoffice &"
"F11" = c : all : f.exec "scribus &"
"F12" = c : all : f.exec "xclock &"
# This is for the window bar
#LeftTitleButton "/usr/X11/include/bitmaps/checkmark.xbm" = f.delete
#LeftTitleButton "/usr/X11R6/include/X11/bitmaps/xm_noenter16" = f.delete
#RightTitleButton "/usr/X11/include/bitmaps/menu12" = f.resize
IconDirectory "/home/admin/.twm/icons" # Directory for non default icons
RightTitleButton "maximize.xbm"=f.fullzoom
RightTitleButton "close.xbm"=f.delete
# And a menus with the usual things
menu "prg"
"Menu" f.title
#"" f.nop
"Xterm" f.exec "xterm -sl 255 -bg black -fg white -name [email protected] &"
#"Midc" f.exec "xterm -sl 255 -bg black -fg white -e midc -b &"
#"Netscape" f.exec "netscape &"
#"Xosview" f.exec "xosview &"
"" f.nop
"Fichiers" f.menu "fichiers"
"Editeurs" f.menu "editeurs"
"Internet" f.menu "internet"
"Bureautique" f.menu "bureautique"
"Graphisme" f.menu "graphisme"
"Visionneurs" f.menu "visionneurs"
"Musique" f.menu "musique"
"Jeux" f.menu "jeux"
"Utilitaires" f.menu "utilitaires"
"Systeme" f.menu "systeme"
"Eteindre/Redémarrer" f.menu "etredemarrer"
menu "etredemarrer"
"Eteindre/Redémarrer" f.title
"Eteindre" f.exec "gksu xterm halt &"
"Redemarrer" f.exec "gksu xterm reboot &"
menu "fichiers"
"Files" f.title
".twmrc" f.exec "medit .twmrc &"
".xinitrc" f.exec "medit .xinitrc &"
menu "bureautique"
"Bureautique" f.title
"Libre Office" f.exec "libreoffice &"
"scribus" f.exec "scribus &"
"gnumeric" f.exec "gnumeric &"
menu "editeurs"
"Editeurs" f.title
"Mcedit" f.exec "xterm mcedit &"
"nano" f.exec "xterm nano &"
"medit" f.exec "medit &"
menu "systeme"
"Systeme" f.title
"Htop" f.exec "xterm htop &"
"Top" f.exec "xterm -bg black -fg white -e top &"
"gparted" f.exec "gksu gparted &"
"/usr/bin" f.exec "thunar /usr/bin &"
"/etc/rc.conf" f.exec "gksu medit /etc/rc.conf &"
"testdisk" f.exec "gksu xterm photorec &"
"Source /etc/pacman.d/mirrorlist" f.exec "gksu medit /etc/pacman.d/mirrorlist &"
menu "visionneurs"
"Visionneurs" f.title
"epdfview" f.exec "epdfview &"
"geeqie" f.exec "geeqie &"
"mupdf" f.exec "xterm mupdf &"
menu "internet"
"Internet" f.title
"icecat" f.exec "icecat &"
"midori" f.exec "midori &"
"elinks" f.exec "xterm elinks &"
"w3m" f.exec "xterm w3m http://www.scroogle.fr &"
"netrik" f.exec "netrik http://www.scroogle.fr &"
"Lynx" f.exec "xterm -bg black -fg white -e lynx &"
"sylpheed" f.exec "sylpheed &"
"skype" f.exec "skype &"
"icecat" f.exec "icecat &"
"deluge" f.exec "deluge &"
menu "ppp"
"PPP" f.title
"Linkup" f.exec "pppd &"
"Hang up" f.exec "ppp-off &"
menu "graphisme"
"Graphisme" f.title
"inkscape" f.exec "inkscape &"
"Gimp" f.exec "gimp &"
menu "musique"
"Music" f.title
"CdPlayer" f.exec "xterm -bg black -fg white -e cd-console &"
"Mp3Blaster" f.exec "xterm -bg black -fg white -e mp3blaster &"
"RealPlayer" f.exec "/usr/home/keppler/RealPlayer8/realplay &"
"Xmovie" f.exec "xmovie &"
#"X11amp" f.exec "x11amp &"
#"Workman" f.exec "workman &"
"vlc" f.exec "vlc &"
menu "jeux"
"Games" f.title
"Xboard" f.exec "xboard -rv &"
menu "utilitaires"
"Utilitaires" f.title
"Corbeille" f.exec "thunar trash:/// &"
"Thunar" f.exec "thunar &"
"Xcalc" f.exec "xcalc &"
"alsamixer" f.exec "alsamixer &"
"terminal Sakura" f.exec "sakura &"
"calc" f.exec "xterm calc &"
"qalculate" f.exec "qalculate-gtk &"
"truecrypt" f.exec "truecrypt &"
"scrot" f.exec "xterm scrot -d 20 &"
"xarchiver" f.exec "xarchiver &"
"xclock" f.exec "xclock &"
menu "window"
"Menu twm" f.title
"forcer à quitter" f.destroy
"Delete Window" f.delete
"" f.nop
"Maximize" f.fullzoom
"Minimize" f.iconify
#"Resize" f.resize
"Move" f.move
#"Raise" f.raise
#"Lower" f.lower
"" f.nop
"Focus" f.focus
"Unfocus" f.unfocus
"Show Iconmgr" f.showiconmgr
"Hide Iconmgr" f.hideiconmgr
"" f.nop
"Screensaver" f.menu "screensaver"
"Redraw" f.refresh
"Restart" f.restart
"Quit" f.menu "quit"
menu "quit"
"Really Quit?" f.title
"No" f.nop
"Yes" f.quit
menu "screensaver"
"ZZzz..." f.title
"Laser" f.exec "xlock -nolock -mode laser &"
"Qix" f.exec "xlock -nolock -mode qix &"
"Star trek" f.exec "xlock -nolock -mode star &"
"Galaxy" f.exec "xlock -nolock -mode galaxy -wireframe&"
"Pyrotechnical" f.exec "xlock -nolock -mode pyro -wireframe &"
"Swarm" f.exec "xlock -nolock -mode swarm &"
"Linux" f.exec "xlock -nolock -mode flag &"
Icons
"XTerm" "/usr/X11R6/include/X11/bitmaps/Term"
"x11amp" "/usr/include/X11/bitmaps/xfm_au.xbm"
Cursors
Frame "left_ptr"
Title "left_ptr"
Icon "left_ptr"
IconMgr "left_ptr"
Move "fleur"
Resize "fleur"
Menu "hand1"
Button "hand2"
Wait "clock"
Select "dot"
Destroy "pirate"

Embedded or in-line web page in mail! Almost there but not quite.

I have successfuly made a small web page in GoLive ( one small images, an animation GIF and a short block of text to act as an extended signature) then rendered/ viewed the page in Safari and everything looks OK at this stage. Then from file menu gone to 'Mail contents of this page' which of course opens the Mail.app and I can then see the images and text embedded into the mail and not as an attachment.
Sending to myself it works fine so that when I receive it the images appear as part of the message but send out to others and they just see ? marks in blue boxes.
What have I missed. Is there something I need to put into the header?

Which options do you see enabled and which greyed out in the bottom part of the View > Message menu? If Best Alternative or Next Alternative are enabled, does choosing them fix the problem?
There is a hidden setting that makes Plain Text the preferred alternative for viewing messages. Maybe something has caused that setting to be turned ON, in which case you might be able to fix the problem by turning it OFF.
Open /Applications/Utilities/Terminal, type the following command (you can just copy it here and paste it in Terminal), and press <Return>:
defaults write com.apple.mail PreferPlainText -bool FALSE
Alternatively, you could issue the following command to revert to the default setting (which should accomplish the same, since the default is to not prefer Plain Text):
defaults delete com.apple.mail PreferPlainText

Hp Officejet Pro 8500 will print but not anything with black ink. It keeps aligning itself.

My Hp Officejet Pro 8500 will print but not anything with black ink - i have checked the black ink cartridge and it is full. Whenever i print anything in colour (only option) the printer goes into an alignment/maintenace loop that lasts for a long time and does not fix the problem. What should I do?

Clean your printerhesd 4-5 times until the black fully restores. I am on my third complete cleaning and have gone from 0% black to approx. 60-70%. So, it works just takes time.

Mac Pro 8 core - great, but not great... Any ideas please?

Hi Guys,
Firstly, let me say I'm Apple Certified in FCP so I'm not a newbie, however I am having a hard time coming to terms with my current situation.
My G5 Quad appeared to be struggling on some basic (3 layers of text) real time stuff in PAL DV, and I was lucky enough to be able to upgrade to a Mac Pro 8 core 3.0GHz last week. "That will sort my stuttering problems" I thought...
No it doesn't. Any new basic text (Boris) or any dissolve makes the playback jump, possibly worse than the G5 did. Aaaaargh! Anyone got any ideas why this shouldn't play back a dream?
Also, does anyone know why the Blackmagic never appears as an option in the Effect Handling section of System Settings?
Hope you can all help soon.
p.s. I have not got any media on my startup disk, and the second disk is almost empty...

Assuming your Scratch Disk is on the 2nd drive inside the Mac Pro, then let's see if that drive might be under-performing. Download Kona system Test v3 from http://www.aja.com/html/supportkona3swd.html and install it.
Run the test on both drives, using the largest file size. Please report back on the read & write numbers you get on each drive.
BTW, journaling should make no discernible difference on a SATA 3Gbps hard drive, and you most definitely SHOULD enable journaling on your boot volume. It doesn't matter either way for the media drive, but if you do not enable journaling for the boot volume, it will bite you in the butt someday. Trust me on that.
Besides, journaling takes zero action on a disk read, which is what you are having problems with. It takes a tiny bit of time for the write heads to write the data to the journal, but not enough to make any real difference for your extremely speedy Mac Pro. The location of the journal file is on the outermost tracks on the platters, the fastest ones.

Sign in Issue on pc but not on Lync throughOWA.

Hello,
We have an issue with one of our users. He is able to use Lync through OWA but not with Lync 2010 client. Our infrastructure is Lync Server 2013 On-Premise + Exchange 2010 On-Premise.
I tried to sign-in my own computer with his account without success.
I got this error :
"Sign-in didn't work.
You didn't get signed in. It might be your sign-in address or logon credentials."
I already deleted then recreated his Lync account with the Lync Control Panel, but it did not resolve the issue. I know that this user has a previous Lync account on another domain on our AD forest that has been deleted.
Does anyone have an idea or where to look for ?
Thank you
Jonatan

Good troubleshooting steps, Eason, but I am wondering if they may be unnecessary since Jonatan has already tried logging in with the problematic user account on his own computer (where your login presumabley works without issue?).
At any rate, this does indeed sound tricky. I am having a hard time thinking of why a user account would be unable to sign in from a desktop client, but not have issue in OWA. Is it possible to also try signing him in on a mobile device, assuming you have Edge
access setup and the user is allowed External access via policy? Also, my advice at this point is to take a good look at the 'Lync-UccApi-0.UccApilog' log file in this directory: 'C:\Users\<username>\AppData\Local\Microsoft\Office\15.0\Lync\Tracing\.'
If the file looks too big and cumbersome, try deleting the file with the user logged out, and then have them try the login again. The file should be recreated, and will only have the data relating to his sign-on attempt. If you find anything interesting in
it, but need further help with interpreting what you found, feel free to copy it here, and I will do my best to assist!
-Regards,
Josh B. | MCSE: Communication; MCSA: Office 365
Blog: http://blog.msucguy.com
View Josh Blalock's
profile

Output from DVD Studio Pro plays on computer but not on TV DVD?

When I output a DVD from DVD Pro (16:9) it plays fine on the computer (and other computers) but not on a conventional DVD player. What am I doing wrong?

I don't want to take over this thread, but figured why start another when I am having this exact same issue. I create my project, everything is good, I simulate it and everything is good, I burn it to disc and play it on the computer and everything is good, try it in a conventional player and it says it's unreadable and kicks it out. I've tried it in Two different players that both have been able to play movies created in iDVD just fine.
I browsed my disc I created and it didn't have the standard files (VOB etc) so I thought maybe I mistakenly burned it in HD, checked the encoder settings adn they were set to HD. Fixed that so it was 16:9 SD, burned another and same exact result. Do I need to create a whole new project so it will encode the whole thing in SD? I did do a new movie track and it should have encoded it at SD but I think everything else (Menus, Slideshow, etc) are all in HD still (maybe???). Any suggestions or help are greatly appreciated.

DVD Drive issues, plays CDs but not DVD data or regular - Satellite (unknown series type)

I tried to update the firmware but ran into some strange issues. First of all according to google, the drive is manufactured by Panasonic. Toshiba doesn't make their own drives? For this reason I wonder if it is improperly detecting the drive make/model.
Anyways I downloaded the firmware update for it, version 1.03. It is a MAT**bleep**A UJDA760 (going from memory, model may be slightly diff like UDJA). When I run the firmware update it doesn't detect the drive at all and says it is for a THINKPAD?? Weird...
Also, if you have a link to a guide for removing this drive I would appreciate it. I want to verify that windows is detecting the model/maker correctly. It is not one of the simple hotswap types, it looks like I have to remove at least the entire bottom of the laptop.
I am working on this for a client, I do tech repair on craigslist but my laptop hardware expertise is limited most of my experience is with desktops.

joe7dust wrote:
I tried to update the firmware but ran into some strange issues. First of all according to google, the drive is manufactured by Panasonic. Toshiba doesn't make their own drives? For this reason I wonder if it is improperly detecting the drive make/model.
Anyways I downloaded the firmware update for it, version 1.03. It is a MAT**bleep**A UJDA760 (going from memory, model may be slightly diff like UDJA). When I run the firmware update it doesn't detect the drive at all and says it is for a THINKPAD?? Weird...
Also, if you have a link to a guide for removing this drive I would appreciate it. I want to verify that windows is detecting the model/maker correctly. It is not one of the simple hotswap types, it looks like I have to remove at least the entire bottom of the laptop.
I am working on this for a client, I do tech repair on craigslist but my laptop hardware expertise is limited most of my experience is with desktops.
Typically if the optical drive can read CDs but not DVDs (or vice versa), there has been a hardware failure of the DVD or CD circuitry. Drivers/firmware aren't going to solve the problem, only replacement of the drive.
Find the correct drive at http://www.sparepartswarehouse.com/
Find unofficial disassembly instructions at http://www.irisvista.com/

Why am I now having certificate issues with Firefox but not IE?

I can no longer log into Gmail, Facebook, Amazon, etc... using Firefox. I get the following error "accounts.google.com uses an invalid security certificate. The certificate is not trusted because no issuer chain was provided. (Error code: sec_error_unknown_issuer)". It works with IE but not Firefox. This just started a few days ago - prior to that I was able to log into those https sites without issue.
Any suggestions? Thank you.

"browser.xul.error_pages.expert_bad_cert" was set on false so I set it to true and tried reloading.
Got the page giving me the option to add exception and continue. Kept trying that and would not continue to the page even after accepting 10+ times.

Path not working in win xp pro, can call java but not javac !

Hello,
I just upgraded to win xp and set up the J2SDK. I have set the path variable in the environment settings.
when I tried to test this by typing java from my documents directory it works all right but not the javac command, to which it gives the error
"'javac' is not recognized as an internal or external command,
operable program or batch file."
when I type path then I get the following result -
PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\FSC\PCOBOL32;C:\Program Files\FSC\PCOBOL32;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;c:\borland\bcc55\bin; c:\jdk1.4.0_01\bin;C:\FSC\PCOBOL32;C:\PROGRAM\PCOBOL32 , so my path settings are correct.
Why is this happening? Thanks for any help.
- rdg
P.S. I also am also unable to invoke the c++ compiler from my documents, so I think this may be a problem with my path, but then how am i able to call the java.exe ?

-----BEGIN PGP SIGNED MESSAGE-----
In win xp you must type the name of the directory as Dos-8 format,
for example, if you want to use c:\J2sdk1.4.0_01 you must write in
the path c:\j2sdk1~1.0_0
-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 7.0.3 for non-commercial use <http://www.pgp.com>
iQEVAwUBPWL6quIx3Zm+mBoJAQFhVwf/dM2pfQYN5Wp5AnmD+HV1Nx+5MSm1zmUs
b3UPC8xJt0JhJItyims6YLEJKAv+Mrm0sk3fVyfg1o4Tcpw0bzG/RsVdsTsrmlDu
vUlqWrxgTRH85IAjro83lGNuLUo6PKs10hVj4h4tqL8BkLE4pCkZfLT2tpG7VLt0
YylUFx6DZQzF1HVK9+6MqYOvBEjxLhkNRHThNysUJj6SBkNHKDbDgnOcUQf+8PpZ
RxItuKGUys6FdLSvrxonbj2qbHJ34Ewb/a8DL1MXcCOtP2QGIta4ozq/3SVPDAK4
BD/NG97FsuYbL/l18Je4EzXRWqtG9IlIY8WBhbdx8X3B3fpuq8gICw==
=UJDG
-----END PGP SIGNATURE-----

Hp officejet pro 8600 connected wirelessly but not recognized

I have an hp officejet 8600 n911a which is connected to my wireless internet. I have run wireless network test results and printer status reports which both show connected. when you touch the internet icon it shows connected also with an ip address. However it will not connect to my computer, ipod, ipad, or any other device to print. The product software will not even ping the device to connect to the printer. It is like it will accept an incoming connection from my router but not send out a connection signal or recieve a signal to print on the same wireless connection. I have verified that it is set up on the same internet connection but the device is not recognized and when I type in the ip address in the address bar of chrome or explorer it says page cannot be opened. However I can email wirelessly to my printer to eprint by using the email given to me by my printer. I am very confused. Any help would be great.
Melody

With the network does the 5Ghz wirless have a different name to the 2Ghz network?
If they have the same network name then you should change the ssids to be different so then you can tell which networks its on.
From what you have told me it sounds like a 5Ghz 2 Ghz mismatch
JonW
I work for HP

AX Issue w/ PC but not MBPro?? Riddle me this Batman

So I can connect all the computers in the house if my AX is not secured w/ a WPA2 password, but once protected my MBPro and GF's Laptop connects fine but not the PC Gaming machine. I run AP Utility and it can't find the Apple Device?? If I reset the AX then I can connect again because it's a unsecured network again and I can then set up the router w/ AP Utility. Once I encrypt it I loose the network again?? Bizarre Right??
Help Pls!!

Here is the thing. Before I bought my MBP the PC that won't connect, was used to set up the network and worked w/ a WPA/WPA2 Personal password. So I know it works. Now that I have this laptop it won't find the network once encrypted and I have downloaded all the newest and latest patches and software updates, so it isn't that... I don't think. But lets keep tryin', I'm sure we are close to a solution. Right? I'm wondering if once it personalizes the network steps away from just using the default settings, somehow it changes the path in which the PC uses to find the network is modified somehow (poking in the dark now). Prolly doesn't make a difference. Any other suggestions?

Nearly there but not quite - Please help with display issue

Hi,
I had an issue with my mac starting which I resolved by replacing the graphics card. The mac now starts without issue BUT!
In display preferences there is only one display resolution, no detect display button and if I try to calibrate the sliders have no effect
I have tried resetting PRAM and SMC with no effect and also tried a different monitor
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro3,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          3 GHz
Number Of Processors:          2
Total Number Of Cores:          8
L2 Cache (per processor):          12 MB
Memory:          8 GB
Bus Speed:          1.6 GHz
Boot ROM Version:          MP31.006C.B05
SMC Version (system):          1.25f4
Serial Number (system):          CK******XYL
Hardware UUID: *****
ATI Radeon HD 5770: (Previously ATI Radeon HD 2600 XT)
Chipset Model:          ATI Radeon HD 5770
Type:          Display
Bus:          PCIe
Slot:          Slot-1
PCIe Lane Width:          x16
VRAM (Total):          1024 MB
Vendor:          ATI (0x1002)
Device ID:          0x68b8
Revision ID:          0x0000
ROM Revision:          113-C0160C-155
EFI Driver Version:          01.00.436
Displays:
Display:
Resolution:          1920 x 1200
Depth:          32-Bit Color
Core Image:          Software
Main Display:          Yes
Mirror:          Off
Online:          Yes
Quartz Extreme:          Not Supported
Display Connector:
Display Connector:
<Edited By Host>

Not everyone updates their hardware porfile but it should have been spotted that yours lists 10.5.8 which was a big clue and reason to ask and check what you are runnning.
Apple sells 10.6.3. Unlike the prior two which did come out with 10.X.6 which would work and allow boot from DVD you may need the 10.6.8 on flash memory that comes with Lion except that is $69.
We usually do but get tired now that we've been saying "ATI 5x70 needs 10.6.5 or later" when people upgraded their graphic card like you did.
I wish that wasn't so. I don't know how ATI does it for Windows but they do have to retool their drivers when a new OS comes out but end up with a package that supports more than one OS version.

InDesign almost hanging with tables, but not quite.

InDesign CS5 (7.0.4) on iMac 2.7i5, 12GB RAM, OS 10.7.3 runs very slowly when editing tables, applying cell styles and table styles. Almost hangs - no spinning beach ball. This has only been happening for the last few weeks, and also happens on a MacPro (Also 10.7.3), 2 x 2.26 Xeon & 12GB RAM. Have tried SING removal, but makes no difference.
Any ideas?

I'm guessing John, or resident expert on these things, will want to see it, so please when it hangs, run Activity Monitor, select InDesign, and run Sample Process. You'll get a report. Upload it to http://pastebin.com/.
If it were an actual hang, he'd want you to do more, but we'll wait and see what he says.

Network ... almost working but not for all adresses[RESOLVED]

Hi,
I have a very weird matter since a few weeks. (can't figure out if it's due tu an update or what).
I'm currently writing from my arch laptop : so you may say my network works fine.
Exept, it only works with some sites.
I mean : I cannot access http://www.archlinux.fr/ for exampe, or many other, whereas other work juste fine.
(by "access" I mean : use a browser to see the page.)
This happens :
- on Wifi
- on linked network
- with chromium or firefox
On the other hand : ping and traceroute works fine for these otherwise unreachable adresses.
Weirder still : if I reboot on another OS, everything works flawlessly.
Another PC linked to the same broadband router will show no problem either.
Accessing the "cache" version of sites from g**gle page shows results.
I tried reboot, network restart ... now I dont' know what to try.
Here's my hardware : Laptop is Lenovo Y510
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
kernel 2.6.32-ARCH
in one word : Help ! ;-)
Last edited by skai (2010-01-09 12:09:16)

Hmm, seems I solved it by tweeking with the broadband router.
(I fed it with a backup DNS, and reactivated DoS firewall)
Does neither explain why another PC worked well alongside this one,
nor why another OS gave other results.
Maybe just a broadband router inconsistency, anyway, l'll consider this fixed for now.

Huey pro issue, almost resolved, but, not quite

Similar Messages

Maybe you are looking for