Human Task service not working

Hi helping hands,
I recently stepped into BPEL world.
I created a human task for approve & reject, when I try to run this in BPEL engine, its giving me orabpel-10561 error and the msg: creator is empty.
I tried to find this error code,however I wasnt getting anything from anywhere.
I use SOA suite 10.1.3.1.
If possible give me a link, to learn about human task.
Thanks, Viki

http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/workflow.htm#BABFICJF
This will give you a good overview of the human task

Similar Messages

OIM 11g - Email Notifications configured in human task is not working

Hi,
My requirement is to send email to the assignee whenever a request is assigned to the user. I created a custom bpel workflow and configured email notiifcation in the human task for the status 'assign'. I have configured Email driver with following properties:
Sender Addresses = <[email protected]>
Default Sender Address = <[email protected]>
Outgoing Mail Server = <Exchange server host>
Outgoing Mail Server Port = 25
Outgoing Mail Server Security = none
Outgoing Default From Addr = <[email protected]>
I have also set the Notification Mode to 'Email' in Workflow Notification Properties.
However when a request is assigned to the user, email notifications are not sent.
I do not see any errors in the logs. In Enterprise Manager console I navigated to SOA Infrastructure Home > Human Workflow Engine > Notification Management and I could see outgoing email notifications corresponding to the workflow instance with the status showing 'Sent'.
Also the Exchange server that is being used has already been tested for provisioning emails from OIM and it works fine for provisioning.
Any pointers/troubleshooting tip to resolve this issue is greatly appreciated.
Regards
Deepa

Hi,
My requirement is to send email to the assignee whenever a request is assigned to the user. I created a custom bpel workflow and configured email notiifcation in the human task for the status 'assign'. I have configured Email driver with following properties:
Sender Addresses = <[email protected]>
Default Sender Address = <[email protected]>
Outgoing Mail Server = <Exchange server host>
Outgoing Mail Server Port = 25
Outgoing Mail Server Security = none
Outgoing Default From Addr = <[email protected]>
I have also set the Notification Mode to 'Email' in Workflow Notification Properties.
However when a request is assigned to the user, email notifications are not sent.
I do not see any errors in the logs. In Enterprise Manager console I navigated to SOA Infrastructure Home > Human Workflow Engine > Notification Management and I could see outgoing email notifications corresponding to the workflow instance with the status showing 'Sent'.
Also the Exchange server that is being used has already been tested for provisioning emails from OIM and it works fine for provisioning.
Any pointers/troubleshooting tip to resolve this issue is greatly appreciated.
Regards
Deepa

Working with Human Task Service

Hello everybody,
I'm trying to do some exercises with Human Task Service and ADF, but I have no clue how to do it. Ok here is what I'm trying to do. I've got a small BPMN process, which calls a WebService and gets a list of locations. Afterwards the locations are passed to the user task. A location is composed of the following elements: street (string), city (string) and a zipcode (integer).
The user should be able to select a startLocation, an endLocation and a startDate when he wants to do his trip. The result should be passed to the process.
So far I've created an Human Task with the following parameters: a list of locations, a start location, an end location and a date. I used the autocreation tool to create an adf form. The tool always creates a single table for the locationList and uses input fields for all the elements of startLocation and endLocation. But I want to use 2 selectOneChoice lists, one for startLocation and one for endLocation. An item in the selectOneChoice list should be a single String containing street, city and zipcode.
Could somebody tell me the basic steps to do so? Where and how can I do the transformation of a 'location' into a single string and vice versa? How to bind a selectOneChoice to locationList and startLocation?
Thank you in advance, Chris

You should be able to drag the parameter of the method over to the page and choose to drop it as a selectOneChoice component - you'll then need to bind it to a data control that will provide the possible list of values.
Here is how you would do this conversion of a parameter to a dropdown list in an ADF BC case:
http://blogs.oracle.com/shay/2009/12/adf_query_with_parameters_and.html

BPEL Test waits forever to receive callback from human task service

Hi,
I've created a test (CreditCardInvalidTest.xml) to test a bpel process (testbpel.bpel) which contains a call to a human task service. The problem is when the test executes it waits forever to receive the response message from the human task service but clearly i've emulated it! Would appreciate help.
I've attached both files and highlighted the relevant sections. Thanks.
testbpel.bpel
<process name="testbpel" targetNamespace="http://xmlns.oracle.com/testbpel"
xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:wfcommon="http://xmlns.oracle.com/bpel/workflow/common"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:ns4="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:ns7="http://xmlns.oracle.com/testbpel/creditFault"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:wf="http://schemas.oracle.com/bpel/extension/workflow"
xmlns:ns5="http://oracle.com/esb/namespaces/Fufillment"
xmlns:client="http://xmlns.oracle.com/testbpel"
xmlns:ns6="http://www.creditcardagency.com/CreditCardService"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:taskservice="http://xmlns.oracle.com/bpel/workflow/taskService"
xmlns:ns9="http://xmlns.oracle.com/testbpel/orderRejected"
xmlns:ns1="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:ns3="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions"
xmlns:ns2="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
xmlns:task="http://xmlns.oracle.com/bpel/workflow/task"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:ns8="http://xmlns.oracle.com/testbpel/genericFault">

<partnerLinks>

<partnerLink name="client" partnerLinkType="client:testbpel"
myRole="testbpelProvider" partnerRole="testbpelRequester"/>
<partnerLink name="ShipmentService" partnerRole="execute_pptProvider"
partnerLinkType="ns5:execute_pptLT"/>
<partnerLink name="CreditCardService"
partnerRole="CreditCardServiceProvider"
partnerLinkType="ns6:CreditCardService"/>
<partnerLink myRole="TaskServiceCallbackListener" name="TaskService"
partnerRole="TaskService"
partnerLinkType="taskservice:TaskService"/>
</partnerLinks>

<variables>


<variable name="inputVariable"
messageType="client:testbpelRequestMessage"/>
<variable name="outputVariable"
messageType="client:testbpelResponseMessage"/>
<variable name="n" type="xsd:integer"/>
<variable name="Invoke_ShipmentService_execute_InputVariable"
messageType="ns5:orderRequest_request"/>
<variable name="paymentFault"
messageType="client:testbpelFaultMessage"/>
<variable name="ApproveOrder_1_globalVariable"
messageType="taskservice:taskMessage"/>
<variable name="orderRejectedFault"
messageType="client:testbpelFaultMessage"/>
</variables>
<faultHandlers>
<catchAll>
<sequence name="Sequence_6">
<throw name="Throw_AllFaults"
faultName="ns8:testbpelGenericFault"
faultVariable="paymentFault"/>
</sequence>
</catchAll>
</faultHandlers>

<sequence name="main">

<receive name="receiveInput" partnerLink="client"
portType="client:testbpel" operation="initiate"
variable="inputVariable" createInstance="yes"/>

<scope name="CheckForApproval">
<sequence name="Sequence_4">
<sequence name="Sequence_5">
<scope name="ApproveOrder_1"
xmlns:wf="http://schemas.oracle.com/bpel/extension/workflow"
wf:key="ApproveOrder_1_globalVariable">
<bpelx:annotation>
<bpelx:pattern patternName="bpelx:workflow"></bpelx:pattern>
</bpelx:annotation>
<variables>
<variable name="initiateTaskInput"
messageType="taskservice:initiateTaskMessage"/>
<variable name="initiateTaskResponseMessage"
messageType="taskservice:initiateTaskResponseMessage"/>
</variables>
<correlationSets>
<correlationSet name="WorkflowTaskIdCor"
properties="taskservice:taskId"/>
</correlationSets>
<sequence>
<assign name="ApproveOrder_1_AssignTaskAttributes">
<copy>
<from expression="concat(ora:getProcessURL(), string('/ApproveOrder/ApproveOrder.task'))"/>
<to variable="initiateTaskInput"
part="payload"
query="/taskservice:initiateTask/task:task/task:taskDefinitionURI"/>
</copy>
<copy>
<from expression="number(3)"/>
<to variable="initiateTaskInput"
part="payload"
query="/taskservice:initiateTask/task:task/task:priority"/>
</copy>
<copy>
<from>
<payload xmlns="http://xmlns.oracle.com/bpel/workflow/task"/>
</from>
<to variable="initiateTaskInput"
part="payload"
query="/taskservice:initiateTask/task:task/task:payload"/>
</copy>
</assign>
<assign name="ApproveOrder_1_AssignSystemTaskAttributes">
<copy>
<from expression="ora:getInstanceId()"/>
<to variable="initiateTaskInput"
part="payload"
query="/taskservice:initiateTask/task:task/task:processInfo/task:instanceId"/>
</copy>
<copy>
<from expression="ora:getProcessId()"/>
<to variable="initiateTaskInput"
part="payload"
query="/taskservice:initiateTask/task:task/task:processInfo/task:processName"/>
</copy>
<copy>
<from expression="ora:getProcessId()"/>
<to variable="initiateTaskInput"
part="payload"
query="/taskservice:initiateTask/task:task/task:processInfo/task:processId"/>
</copy>
<copy>
<from expression="ora:getProcessVersion()"/>
<to variable="initiateTaskInput"
part="payload"
query="/taskservice:initiateTask/task:task/task:processInfo/task:processVersion"/>
</copy>
<copy>
<from expression="ora:getDomainId()"/>
<to variable="initiateTaskInput"
part="payload"
query="/taskservice:initiateTask/task:task/task:processInfo/task:domainId"/>
</copy>
<copy>
<from expression="string('BPEL')"/>
<to variable="initiateTaskInput"
part="payload"
query="/taskservice:initiateTask/task:task/task:processInfo/task:processType"/>
</copy>
</assign>
<invoke name="initiateTask_ApproveOrder_1"
partnerLink="TaskService"
portType="taskservice:TaskService"
operation="initiateTask"
inputVariable="initiateTaskInput"
outputVariable="initiateTaskResponseMessage">
<correlations>
<correlation initiate="yes"
set="WorkflowTaskIdCor"
pattern="in"/>
</correlations>
</invoke>
*<receive name="receiveCompletedTask_ApproveOrder_1"*
partnerLink="TaskService"
portType="taskservice:TaskServiceCallback"
operation="onTaskCompleted"
variable="ApproveOrder_1_globalVariable"
createInstance="no">
*<correlations>*
*<correlation initiate="no"*
set="WorkflowTaskIdCor"/>
*</correlations>*
*</receive>*
</sequence>
</scope>
<switch name="taskSwitch">
<case condition="bpws:getVariableData('ApproveOrder_1_globalVariable', 'payload', '/task:task/task:systemAttributes/task:state') = 'COMPLETED' and bpws:getVariableData('ApproveOrder_1_globalVariable', 'payload', '/task:task/task:systemAttributes/task:outcome') = 'REJECT'">
<bpelx:annotation>
<bpelx:pattern patternName="case">Task outcome is REJECT</bpelx:pattern>
</bpelx:annotation>
<sequence>
<assign name="AssignOrderRejected">
<copy>
<from expression="string('Order rejected by manager')"/>
<to variable="paymentFault"
part="payload"
query="/client:testbpelProcessFault/client:status"/>
</copy>
</assign>
<throw name="ThrowOrderRejected"
faultName="ns9:orderRejectedFault"
faultVariable="orderRejectedFault"/>
</sequence>
</case>
<case condition="bpws:getVariableData('ApproveOrder_1_globalVariable', 'payload', '/task:task/task:systemAttributes/task:state') = 'COMPLETED' and bpws:getVariableData('ApproveOrder_1_globalVariable', 'payload', '/task:task/task:systemAttributes/task:outcome') = 'APPROVE'">
<bpelx:annotation>
<bpelx:pattern patternName="case">Task outcome is APPROVE</bpelx:pattern>
</bpelx:annotation>
<sequence>
<empty name="Empty_1"/>
</sequence>
</case>
<otherwise>
<bpelx:annotation>
<bpelx:pattern>Task is outcome is EXPIRED, STALE, WITHDRAWN or ERRORED</bpelx:pattern>
</bpelx:annotation>
<sequence>
<empty name="Empty_2"/>
</sequence>
</otherwise>
</switch>
</sequence>
</sequence>
</scope>
<scope name="CheckCreditCard">
<variables>
<variable name="InvokeCreditCardService_process_InputVariable"
messageType="ns6:CreditCardServiceRequestMessage"/>
<variable name="InvokeCreditCardService_process_OutputVariable"
messageType="ns6:CreditCardServiceResponseMessage"/>
</variables>
<sequence name="Sequence_2">
<assign name="Assign_1">
<copy>
<from variable="inputVariable" part="payload"
query="/client:testbpelProcessRequest/client:CreditCardNumber"/>
<to variable="InvokeCreditCardService_process_InputVariable"
part="payload"
query="/ns6:CreditCardServiceProcessRequest/ns6:CreditCardNumber"/>
</copy>
</assign>
<scope name="Scope_1">
<compensationHandler>
<sequence name="Sequence_7">
<empty name="Empty_3"/>
</sequence>
</compensationHandler>
<invoke name="InvokeCreditCardService"
partnerLink="CreditCardService"
portType="ns6:CreditCardService" operation="process"
inputVariable="InvokeCreditCardService_process_InputVariable"
outputVariable="InvokeCreditCardService_process_OutputVariable"/>
</scope>
<switch name="CheckCreditCardValid">
<case condition="bpws:getVariableData('InvokeCreditCardService_process_OutputVariable','payload','/ns6:CreditCardServiceProcessResponse/ns6:result') = 'false'">
<sequence name="Sequence_3">
<assign name="AssignCreditFault">
<copy>
<from expression="string('Invalid credit card number')"/>
<to variable="paymentFault" part="payload"
query="/client:testbpelProcessFault/client:status"/>
</copy>
</assign>
<throw name="ThrowCreditFault"
faultName="ns7:CreditCardNumberFault"
faultVariable="paymentFault"/>
</sequence>
</case>
</switch>
</sequence>
</scope>
<assign name="AssignInitial">
<copy>
<from expression="string('Select Manufacturer')"/>
<to variable="outputVariable" part="payload"
query="/client:testbpelProcessResponse/client:result"/>
</copy>
<copy>
<from expression="1"/>
<to variable="n"/>
</copy>
<copy>
<from expression="0.0"/>
<to variable="outputVariable" part="payload"
query="/client:testbpelProcessResponse/client:price"/>
</copy>
</assign>
<while name="While_1"
condition="bpws:getVariableData('n') <= count(bpws:getVariableData('inputVariable','payload','/client:testbpelProcessRequest/client:input'))">
<sequence name="Sequence_1">
<assign name="DoCalculation">
<copy>
<from expression="bpws:getVariableData('inputVariable','payload', concat('/client:testbpelProcessRequest/client:input[', bpws:getVariableData('n'), ']/client:quantity')) * bpws:getVariableData('inputVariable','payload',concat('/client:testbpelProcessRequest/client:input[', bpws:getVariableData('n'), ']/client:bookPrice')) + bpws:getVariableData('outputVariable','payload','/client:testbpelProcessResponse/client:price')"/>
<to variable="outputVariable" part="payload"
query="/client:testbpelProcessResponse/client:price"/>
</copy>
<copy>
<from expression="bpws:getVariableData('n') + 1"/>
<to variable="n"/>
</copy>
</assign>
</sequence>
</while>
<assign name="Transform_2">
<bpelx:annotation>
<bpelx:pattern>transformation</bpelx:pattern>
</bpelx:annotation>
<copy>
<from expression="ora:processXSLT('TransformOrder.xsl',bpws:getVariableData('inputVariable','payload'))"/>
<to variable="Invoke_ShipmentService_execute_InputVariable"
part="orderRequest"/>
</copy>
</assign>
<invoke name="Invoke_ShipmentService" partnerLink="ShipmentService"
portType="ns5:execute_ppt" operation="execute"
inputVariable="Invoke_ShipmentService_execute_InputVariable"/>
<invoke name="callbackClient" partnerLink="client"
portType="client:testbpelCallback" operation="onResult"
inputVariable="outputVariable"/>
</sequence>
</process>
CreditCardInvalidTest.xml
<BPELTest processName="testbpel"
xmlns="http://xmlns.oracle.com/bpel/instancedriver"
xmlns:client="http://xmlns.oracle.com/testbpel">
<initiate operation="initiate">
<inboundMessage>
<part fileName="testInput.xml" name="payload"/>
</inboundMessage>
</initiate>
<activityDriver name="callbackClient">
<assertValue variableName="outputVariable" partName="payload"
comparisonMethod="string" fatal="false" patternMatch="false">
<message>Expected "Select Manufacturer"</message>
<actualPath>/client:testbpelProcessResponse/client:result</actualPath>
<expected>Select Manufacturer</expected>
</assertValue>
<assertValue variableName="outputVariable" partName="payload"
comparisonMethod="string" fatal="true" patternMatch="false">
<message>Expected price of "1"</message>
<actualPath>/client:testbpelProcessResponse/client:price</actualPath>
<expected>1</expected>
</assertValue>
</activityDriver>
*<activityDriver name="receiveCompletedTask_ApproveOrder_1">*
*<emulate duration="PT">*
*<inboundMessage>*
*<part fileName="approverResponse.xml" name="payload"/>*
*</inboundMessage>*
*</emulate>*
*</activityDriver>* <--- it waits FOREVER at this bit to receive the approverResponse.xml :s
<activityDriver name="InvokeCreditCardService">
<emulate duration="PT">
<inboundMessage>
<part fileName="creditCardServiceResponse.xml" name="payload"/>
</inboundMessage>
</emulate>
</activityDriver>
<activityDriver name="initiateTask_ApproveOrder_1">
<emulate duration="PT">
<inboundMessage>
<part fileName="getApproval.xml" name="payload"/>
</inboundMessage>
</emulate>
</activityDriver>
</BPELTest>

RaviKiran,
I agree that the explanation oracle provided in the attach link, is a bit confusing. The main goal there is to describe the behavior of processes, when there is a need to combine, or split the transactions within those processes (or in some cases the processes themselves).
The thing is - The default transaction for a synchronous process is requiresNew. That was until version 11.1.1.6. On this last version, you are asking to enter a Transaction parameter when creating a new synchronous bpel process. The default value being prompt is required and that's what causing the problem – You automatically accept the default.
The assumption is, that developing bpel processes, should come with understanding of all those behaviors.
The problem for my understanding is that some of those behaviors were not so cleared until now.
Arik

Office 2013 C2R Update Scheduled Task does not work

Hi all.
I am having difficulty getting network deployed updates to work correctly. I installed and older version of Office 2013 with the ODT from a network share and set the update path. I then downloaded an update via ODT.
The issue is the scheduled task does not update office. If I trigger or manually run from a command prompt "C:\Program Files\Microsoft Office 15\ClientX64\integratedoffice.exe RUNMODE RERUNMODE modetorun updatedetection modeargs reschedulemode tasktrigger
scheduledtask updateuitype background” from Task Scheduler nothing seems to happen. Monitoring Task Manager it looks like integratedoffice is called albeit very briefly.
But, if I run "C:\Program Files\Microsoft Office 15\ClientX64\integratedoffice.exe RUNMODE RERUNMODE modetorun updatedetection background” from a command prompt Office updates, but if I edit the Scheduled Task to above Office does not update if the
task is triggered.
As Office can update if the right command is given it would appear that my config.xml etc is correct. Any ideas on why the Scheduled Task does not work?
Cheers
Jakes

What permissions are set on the location of the updates ? C2R currently needs permissions granted for machine accounts as it runs under that context. This will change at some point that C2R gets updated.

Lion Server DNS service not working for locally created zones. Caching working fine.

OS Lion Server DNS service not working for local zones. Was fine under Snow leopard server but Lion server upgrade has severely broken my DNS and web sites. Zones look fine under Server Admin but keep getting "query failed (SERVFAIL) for xxxx at /SourceCache/bind9/bind9-42/bind9/bin/named/query.c:3921" in the logs. BTW - Server Admin cant seem to see the log file either.
Surely someone actually tested that DNS still worked on Lion?

I upgraded from Snow Leopard Server to Lion Server on day 01. I hit the same issue where, after the upgrade, my Lion Server stopped serving names for my private local domain.
I finally took a few minutes to figure out what was wrong. After turning on debug logging and looking through the logs, I found my particular issue, now resolved.
The issue I had was, when the domain initially was setup when I installed Snow Leopard Server, for some reason it created a zone just for the server (in my case, something like zone "s-01.mydomain.priv"), and a separate zone for all the other machines (zone "mydomain.priv", containing all the private IPs for my local domain). I never messed with it because it worked, but generally I would have put all of them in the same zone.
My zone "mydomain.priv" had a nameserver and mail exchanger entry for my server, s-01.mydomain.priv. I could see this in the Server Admin app on the DNS bubble, Zones tab, mydomain.priv selected, and the General Info panel. This was fine in Snow Leopard. This was failing the zone load in the updated bind for Lion Server, though. The issue was that the "mydomain.priv" zone was referencing the s-01.mydomain.priv server, which was not defined in the "mydomain.priv" zone but rather in the "s-01.mydomain.priv" zone.
My fix:
1. In Server Admin, add the server to the zone "mydomain.priv". I put an A record (Add Machine) in the "mydomain.priv" zone for my server named s-01.mydomain.priv.
2. shut down DNS on the OS X Lion Server (hit the Stop DNS button on Server Admin).
3. edit /etc/named.conf by hand, removing the specialized zones that contianed just the server. In this case, it would be the section titled 'zone "s-01.mydomain.priv"' and the section titled 'zone "3.10.1.10.in-addr.arpa"'. Your in-addr.arpa zone name will change based on whatever your server IP address was. My internal one happened to have s-01.mydomain.priv mapped to 10.1.10.3.
4. Once the specialized zones for just the server were removed, I started the DNS up again. Instead of serving four zones as it had in OS X Snow Leopard Server, it now servers two zones. And, now, it is resolving my local machines for the mydomain.priv zone.
YMMV. I did note that it wasn't totally necessary to do step 3, but I never really understood the need for the specialized domain, and keeping it around would have a copy of data that would just confuse things.
Hope that helps. That's been the only hiccup I've noticed updating to OS X Lion Server thus far.

"no serializer is registered..." error with a web service not working

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

[svn] 4226: Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.

Revision: 4226 Author: [email protected] Date: 2008-12-03 15:25:17 -0800 (Wed, 03 Dec 2008) Log Message: ----------- Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working. QA: Yes Doc: No Checkintests Pass: Yes Details: * Make sure the <reliable/> option is treated as a nested element rather than an attribute of its parent <network> element. Ticket Links: ------------ http://bugs.adobe.com/jira/browse/LCDS-517 Modified Paths: -------------- blazeds/trunk/modules/core/src/flex/messaging/Destination.java

Revision: 4226 Author: [email protected] Date: 2008-12-03 15:25:17 -0800 (Wed, 03 Dec 2008) Log Message: ----------- Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working. QA: Yes Doc: No Checkintests Pass: Yes Details: * Make sure the <reliable/> option is treated as a nested element rather than an attribute of its parent <network> element. Ticket Links: ------------ http://bugs.adobe.com/jira/browse/LCDS-517 Modified Paths: -------------- blazeds/trunk/modules/core/src/flex/messaging/Destination.java

[svn] 4195: Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.

Revision: 4195
Author: [email protected]
Date: 2008-11-26 13:08:23 -0800 (Wed, 26 Nov 2008)
Log Message:
Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-517
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/config/ServerConfig.as

Revision: 4195
Author: [email protected]
Date: 2008-11-26 13:08:23 -0800 (Wed, 26 Nov 2008)
Log Message:
Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-517
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/config/ServerConfig.as

[svn] 4193: Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.

Revision: 4193
Author: [email protected]
Date: 2008-11-26 11:40:05 -0800 (Wed, 26 Nov 2008)
Log Message:
Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* Foundational update to include destination config in what we collect for runtime config exchange with new clients for destinations with network/reliable=true (LCDS only).
* Also typo in comment in AbstractConnectionAwareSession fixed.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-517
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/AbstractConnectionAwareSession.java
blazeds/trunk/modules/core/src/flex/messaging/Destination.java
blazeds/trunk/modules/core/src/flex/messaging/services/AbstractService.java

Revision: 4193
Author: [email protected]
Date: 2008-11-26 11:40:05 -0800 (Wed, 26 Nov 2008)
Log Message:
Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* Foundational update to include destination config in what we collect for runtime config exchange with new clients for destinations with network/reliable=true (LCDS only).
* Also typo in comment in AbstractConnectionAwareSession fixed.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-517
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/AbstractConnectionAwareSession.java
blazeds/trunk/modules/core/src/flex/messaging/Destination.java
blazeds/trunk/modules/core/src/flex/messaging/services/AbstractService.java

I experience issue with my Verizon iPhone5s cellular service not working on 3G.

I'm experiencing issue with my Verizon iPhone5s cellular service not working on 3G but LTE works great. I tried resetting network setting, new SIM card, reset iPhone to new too. I'm have the latest carrier code of 16.0. Iphone firmware 7.1.2.
I started experiencing this when verizon started advertising XLTE.
It is very frustrating when internet does not work when I'm in 3G area. Phone calls does work though. Signal is good too.
Thank you in advance.

I would agree w you but this only happens on Iphone5S.
Iphone5 works fine. I tested this with other Iphone 5 and 5s.
To test this, go to setting/celluar/turn off "Enable LTE"

Task created to stop and start Health service not working.

We have multiple servers being grayed out so we created a task to stop and start the health service on SCOM 2007 R2. We have created two tasks one to stop and another task to start. The STOP task works but the START tasks keeps running but there is no result
as well as when i check in Services.msc it is still stopped. Below are the screen shots .
Task created to STOP the health service which is running.
Screen shot of service start task creation which is NOT working
The same was created for another service windows audio. Which worked for both stop and stop (Created separate tasks).
We also tried the recycle health service and chche which is also failing.
Can any one please help. The issue is on both SCOM 2007R2 and 2012 R2 both. Is there any other way to touch the health service.
We are facing the issue only with Healthservice.

Hi All,
Thank you for all your answers.
@ dktoa -
You are right we have to concentrate on the servers to determine why do they go grey (all in one site). But before we do that i felt i find a temporary solution. Then go deep investigation to solve the issue.
@Yan LI: As per the likn provided above you. I overrided the servers but still the health services were not starting or restarting. When i created a custom group and added the servers to that group in that site and then enabled the override on Restart
Health Service for a specific group and pointed towards that group then it worked.
Thanks All.

ACS 4.2 services not working

The server is running with Windows 2003 SP2 and due to some issue it got rebooted. After reboot all services stopped working.
CSAdmin, CSMon and CSRadius hanged in Starting state and CSLog in Stopping state. When i chaged the startuptype to manual and started these services
i got " Could not start the CSAdmin service on Local computer. Error 1053 The service did not respond to the start or control request in a timely fashion "
For CSLog service it gives the error message "The CSLog service on Local Computer started and then stopped. Some service stop automatically if they have
no work to do, for example, the Performance Logs and Alerts service."
In the eventviewer it shows "The description for Event ID ( 1 ) in Source ( CiscoAAA ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: CSAdmin, Can not initialize SchemeLayer, 74."
While automatic startup type event viewer shows below error.
"The description for Event ID ( 1 ) in Source ( acs ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: *** ERROR *** Assertion failed: 103401 (9.0.0.1271)
Unable to open file (C:\Program Files\CiscoSecure ACS v4.2\CSDB\acs.db) which previously opened successfully; error = 32.The description for Event ID ( 1 ) in Source ( acs ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: *** ERROR *** Assertion failed: 103401 (9.0.0.1271)
Unable to open file (C:\Program Files\CiscoSecure ACS v4.2\CSDB\acs.db) which previously opened successfully; error = 32."
Please help me to fix this.
Thanks

Since we had no access to ACS windows server. We tried to take backup from csutil but it gave schemalayer error message.As we have AV stopped, logs files deleted from the directory, killed the stuck services from the task manager and restarted the server. If it still not allowing you to restart the services, most likely you need to take backup, uninstall the ACS server and reinstall the same version of ACS followed by restore.
~BR
Jatin Katyal
**Do rate helpful posts**

Ctrl Alt Del and Task manager not working

Hi, Ive been having a problem getting task manager to run at all. On a fresh reboot, if I use the ctrl alt del function the according screen will come up like normal, and I will click on task manager. It bring me back to my desktop and nothing pops up.
Its not running in my task bar or anything. Then if I try to use the ctrl alt del function again, nothing happens. Ive tried running task manager straight from the start menu, but then I get an error saying that the version of that file is not compatible with
the version of windows I am running, which is 64 bit W7. It just started happening on my system a few days ago and I have changed nothing the past few days. I have tried to do a system restore, but to my idiocy, I did not know I needed to manually create restore
points. So I can only restore to yesterday which would fix nothing. I have run antivirus and anti spyware programs and they have shown no problems and my hard drive only has a 1% disk fragmentation. Is there a way to uninstall and re download a 64 bit compatible
version of the windows 7 task manager? Or is there a separate reason why it is not working? Thankyou

Also try it By Registry Editor :
Start --> Run --> regedit --> ok
Then
Hive: HKEY_CURRENT_USER
Key: Software\Microsoft\Windows\CurrentVersion\Policies\System
Name: DisableTaskMgr
Type: REG_DWORD
Value: 0=Disablethis key, that is Don't Disable, Enable TaskManager
Regards,
MCP | MCTS | MCITP
The first fix did not work, I tried doing the second one but there is no system folder in
Software\Microsoft\Windows\CurrentVersion\Policies\
The only one its showing is an explorer folder.

Web service not working when called remotely

Hi there!
I built a simple web service to generate a sequence number to be cosumed by PDF forms.
It works perfecly when I run PDFs on my machine, using localhost, etc.
Whem deployed on the client's servers it does not work. The only difference is the client is running LiveCycle on Linux over their inhouse corporate network.
When the web service is added to forms in LC Designer, the ws structure is built correctly and if called from a web browser the XML response is ok too.
I've checked LiveCycle log file - there's nothing there, the ws is not even being called.
Where should I look for error messages or other resources to aid me in identifying the problem?
Thank you very much for any hints!
Marcos

Hi there!
I built a simple web service to generate a sequence number to be cosumed by PDF forms.
It works perfecly when I run PDFs on my machine, using localhost, etc.
Whem deployed on the client's servers it does not work. The only difference is the client is running LiveCycle on Linux over their inhouse corporate network.
When the web service is added to forms in LC Designer, the ws structure is built correctly and if called from a web browser the XML response is ok too.
I've checked LiveCycle log file - there's nothing there, the ws is not even being called.
Where should I look for error messages or other resources to aid me in identifying the problem?
Thank you very much for any hints!
Marcos

Human Task service not working

Similar Messages

Maybe you are looking for