Hyperion FR , Planning Details, Limit member selection based on access.

Hi There
I am working on a project
Version 11.1.2.2, FR connected with "Planning Details""
I want to limit POV "Entity" member selection based on access right and I don't want to set User POV one by one.
For ex:
US users don't need to see Canada users' entity.
I am looking for a solution or workaround that can be easy to manage and save time.
Highly appreciate and Thanks

You can actually set the default values in jconsole. jconsole can be started with FRConfig.cmd (normally under C:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin).
Change the value of "com.hyperion.reporting.HRPrefs.filter_by_security" to true, this way, the the default values will be true for all users who haven't set it in user preference yet.
This will list only the members which the users has access.
I believe this is what you are looking for.
Edited by: Krishna Kumar K P on Sep 14, 2012 9:50 AM

Similar Messages

  • Limit member selection based on access in running Hyperion Financial Report

    Hi there
    I am wondering, is it possible to limit the member selection in a prompt box based on what access they have when running a Hyperion Financial Report?
    I know its possible to limit the user POV based on the members they have access to (in Preferences) but we have a reporting requirement on the page dimension to prompt the user for what cost centres they want to run the report for. When I used a prompt function the user gets to select any cost centre in the "choices" range regardless of whether they have access or not. We just want it to show what cost centres they have access to.
    Thanks

    If the datasource is ready only and not writeable for the users, then you can use MetaRead filters for cost centre, which will only show the hierarchies the users have access to.
    (You cannot mix Write and MetaRead filters in the same filter, it would be Write and Read).
    Let me know if that's an option.
    Cheers, Iain

  • Php code limit a user based on access level

    building site where users post items for sale
    different levels of access
    want to limit basic access level to 10 postings
    use php/mysql and dreamweaver CS4
    thanks for your help,
    jim balthrop

    sounds phenominal
    Like Craigslist but you have to pay... sign me up!
    If the activation method of the registration being sent to your email is this method then, as mentioned, it can be circumvented. And the IP address is an absolute fool-proof way to prevent multiple registration. That is of course without the consideration that the user may use a proxy server or otherwise cloak their IP address.
    Think of it this way: what if you were only allowed to post 10 threads in the Adobe forums and after that you had to pay to get "many benefits besides unlimited posting" What do you think DWFAQ would do?

  • Dynamic row selection based on Page member selection in Planning web-form

    Hello experts
    I have requirement where, user dont want 10 webforms to enter 2 accounts line for various sparse members. Below is the dimension detail and web-form current design
    Account - Dense
    Period - Dense
    Year - Sparse
    Scenario - Sparse
    Version - Sparse
    Entity - Sparse
    Product - Sparse (600 level 0 members)
    Product dim has family1 as parent and 40 level 0 mem like that there are 10 family level 1 members, now to enter account member (only 2 member) for 6 years projection ( it means 12 periods and 6 years in column ) , i can build 10 web-forms with one web-form has one family level-0 mem in rows,
    however my question, is how can i achieve this in one web-form, instead of 10 web-forms for 400 products ?
    your help is greatly appreciated.
    Edited by: 859874 on Jul 18, 2012 8:58 PM

    Im not sure there is any simple way to get dynamic row selection based on what is selected in the page.
    If I were designing the form based on what you have stated, I would probably stick both Account and Year in the page, and the 400 products in rows. This would require the user to select the different combinations of Year / Account, but would mean only 12 columns (instead of 72).
    Alternatively you could stick Account in rows too - meaning 800 rows, but less combinations to select in Page....all depends what is deemed acceptable to the user.
    Probably other approaches that may be better than above (put Product in the Page for fun!!)
    Thanks
    JB

  • Hyperion Financial Reports - Member selection issue

    Hi,
    We are using Hyperion suite 9.2.0.3. We get an error during Member selection in POV when executing a book or report. The member selection window looks blank.
    We have tried restarting the services of Financial report and Essbase. But no luck.
    Can someone help us in getting this issue resolved.
    Thanks,
    Sethu

    I'm not sure I have a good answer for you, but in my experience blank screens are usually caused by failing weblogic, apache, or a firewall setting.
    You might have better success getting an answer in the Hyperion Query and Reporting forum.
    Hyperion Query and Reporting
    Good Luck,
    Tim Young

  • Restricting members in Planning Webform depending on the member selection

    Hi Guru's
    Is there a way in the planning webform, to restrict members showing in the form, for example, I have Entity, Employee, Position. Depending on the entity selection I need to display on the form related to that entity. Any help will be greatly appreciated.

    Im not sure there is any simple way to get dynamic row selection based on what is selected in the page.
    If I were designing the form based on what you have stated, I would probably stick both Account and Year in the page, and the 400 products in rows. This would require the user to select the different combinations of Year / Account, but would mean only 12 columns (instead of 72).
    Alternatively you could stick Account in rows too - meaning 800 rows, but less combinations to select in Page....all depends what is deemed acceptable to the user.
    Probably other approaches that may be better than above (put Product in the Page for fun!!)
    Thanks
    JB

  • Member selection (Member + UDA) on Planning Web-forms

    Hi all,
    Is it possible to select members and UDAs together on Planning Web-forms similar to member selection on Financial Reports?
    Example:
    Members: ILvl0Descendants ("Total Net Income")
    UDA: ALLOCACT
    I didn't see this option on the member selection window, but I wanted to make sure that I am not missing anything.
    Thanks,
    Mehmet

    Hi,
    UDA does not work in data forms. If you want that property to be there in the data form, please create an attribute dimension with the same children as UDA and attach the attribute members to that dimension.
    Thanks.

  • Hyperion Financial Reports:Getting member selection from prompt

    Hello everybody,
    I've a doubt on getting the member selection in GRID 2 from the prompt value set in GRID 1.
    Can anyone help me out???
    Regards,
    Revathi

    I'm not sure I have a good answer for you, but in my experience blank screens are usually caused by failing weblogic, apache, or a firewall setting.
    You might have better success getting an answer in the Hyperion Query and Reporting forum.
    Hyperion Query and Reporting
    Good Luck,
    Tim Young

  • Member Selection Button Fails in Excel

    Has anybody run into a situation where the Member Selection button does not work in Excel 2007? When someone tries to use the button Excel simply freezes forcing the users to re-boot the computer. This is happening on a handful of Corporate users making it extremely difficult to examine their computers for any length of time. For the four users in question they are using Excel 2007 (some with Service Pack 2, some without), Windows XP, and SmartView 11.1.1.3. I was able to test if 11.1.1.3.05 would help and it does not. We are using the 11.1.1.3 version of the Hyperion Suite: HFM, Planning, Essbase, etc. I tend to think it is a user-specific issue but I could not put my finger on it: specific Excel add-ons, Windows issues, etc. When I was working with Oracle Support they were focusing on Essbase and its setup but I proved that this issue happens in HFM and not just HPL/Essbase.
    Any insights would be greatly appreciated.
    Roman

    Thanks everyone for replying to this message. We could never find a viable solution so we decided to re-image the computers/laptops of the handful of users with this issue. This seemed to do the trick. At this point we think that there was something interfering on the specific machines that we could not identify.
    Roman

  • Any way to limit POV selections between different dimension?

    Hi,
    For Hyperion Planning:
    My users continuously ask for to limit POV selections between different dimensions.
    For example,
    Dimension Entity: West, South, East, North
    Dimension StoreType: Mega, Super, Normal
    However, the following combinations make sense in current business context.
    West - Mega
    West - Super
    West - Normal
    South - Normal
    East - Normal
    If users select East - Mega, this does not make sense since there is no such combinations in current business context.
    Do any one know a way to limit the wrong selection?
    Thank you in advance.
    Casper H

    This link will give you the answer :- Re: Help in Data forms
    probably not the answer you want to hear though.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to copy billing plan details of main item to all its sub-items...

    In the sales order, we have main item and sub-items. The main item is a project item and it has a billing plan which gets copied from the project. Now the requirement is to copy the same billing plan(of the mainitem) to all its subitems- billing dates, billing type, billing rule, date category, percentage of the amount to be billed, etc. So that when we do billing for this sales order all the items and its sub items are copied in the milestone billing document.
    The billing plan is not at header level since the sales order can have multiple project items and their milestones can differ.
    Please suggest how to acheive this- coping of billing plan details from main item to all the subitems.
    Rds,
    sucmsss

    You can use the enhancement section in include mv45af0f_fplan_aktualisieren_c. In the below code, I am copying milestone lines from previous document, but you could adapt to copy from the higher level item. Copy and pretty print it in ABAP editor.
    ENHANCEMENT 10  ZSD_SALES_DOC1.    "active version * Generate Billing Plan without dialog. * Because copy control does not work with milestone billing plans, we need to perform the below tricks.
      DATA: zlt_fplt TYPE TABLE OF fpltvb,         zlt_fpla TYPE TABLE OF fplavb,         zlv_fareg TYPE tfpla-fareg,         zlv_fplnr TYPE fplnr,         zls_vbkd TYPE vbkd.   FIELD-SYMBOLS:TYPE vbkdvb,                 TYPE fplavb,                 TYPE fpltvb,                 TYPE fpltvb.
    IF xvbkd-updkz = chari AND       tvap-fpart IS NOT INITIAL AND *      xfplt[] IS INITIAL AND       vbkd-fplnr IS INITIAL AND "bill plan not created       vbak-vbtyp CA 'CG'. "contracts and orders       SELECT SINGLE fareg FROM tfpla INTO zlv_fareg WHERE         fpart = tvap-fpart.         IF zlv_fareg IS NOT INITIAL AND           zlv_fareg <> '6'.         READ TABLE cvbkd ASSIGNINGWITH KEY         vbeln = vbap-vgbel         posnr = vbap-vgpos.         IF sy-subrc IS INITIAL.           CALL FUNCTION 'BILLING_SCHEDULE_READ'             EXPORTING              fplnr          =-fplnr             tables              ZFPLA          = zlt_fpla              zfplt          = zlt_fplt. * Check if any of the lines are not periodic and not from milestone before proceeding.            READ TABLE zlt_fplt ASSIGNINGWITH KEY            MLSTN = abap_false            nfdat = 0.          IF sy-subrc IS INITIAL.           CONCATENATE '$000' vbap-posnr INTO zlv_fplnr.           ENDIF.         ENDIF.         IF sy-subrc IS INITIAL.           LOOP AT zlt_fplt ASSIGNINGWHERE             mlstn = abap_false.            -fplnr = zlv_fplnr.             APPENDTO xfplt.            -updkz = chari.           ENDLOOP.           LOOP AT zlt_fpla ASSIGNING.            -fplnr = zlv_fplnr.             CLEAR-vbeln.            -updkz = chari.             APPENDTO xfpla.           ENDLOOP.           da_fplnr =-fplnr.         ENDIF.       ENDIF.     ENDIF.     CALL FUNCTION 'BILLING_SCHEDULE_GENERATE'          EXPORTING               I_FKDAT        = VBKD-FKDAT               I_FPLNR        = DA_FPLNR               I_WAERS        = VBAK-WAERK               I_FPART        = TVAP-FPART               I_VEDA         = XVEDA               I_VEDA_KOPF    = VEDAVB               I_UPD_FPLA     = UPD_FPLA               I_UPD_FPLT     = UPD_FPLT               I_KOMK         = TKOMK               I_KOMP         = TKOMP               I_KOMPAX       = KOMPAX               I_FKREL        = VBAP-FKREL               I_CREATE_DATES = US_FLG_CREATE_DATES               I_KFPLAN       = DA_KFPLAN               I_KFPLNR       = DA_KFPLNR               I_NOMSG        = US_NOMSG               I_ABSAGEN      = DA_ABSAGEN               I_FPLAA        = FPLAA          IMPORTING               E_FPLNR        = XVBKD-FPLNR               E_DATALOSS     = DA_DATALOSS               E_UPD_FPLA     = UPD_FPLA               E_UPD_FPLT     = UPD_FPLT               E_KOMPAX       = KOMPAX          TABLES               FPLA_NEW       = XFPLA               FPLA_OLD       = YFPLA               FPLT_NEW       = XFPLT               FPLT_OLD       = YFPLT               I_FPLTS        = TFPLTS               I_FPLTNP       = TFPLTNP               I_KOMV         = XKOMV               I_TKOMK        = TKOMK               I_SVBAP        = UVBAP.     LOOP AT zlt_fplt ASSIGNING.       READ TABLE xfplt ASSIGNINGWITH KEY       mandt =-mandt       fplnr =-fplnr       fpltr =-fpltr.       CHECK sy-subrc IS INITIAL.      -updkz = chari.     ENDLOOP. ENDENHANCEMENT.

  • EPM Modules not opening in Hyperion 9 planning workspace

    Hi,
    Our problem is relating EPM, we did Hyperion 9.3 installation on a test server and made replicas of 2 live applications but the deploy aborted at 0%. Assuming it was some configuration problem we reinstalled Hyperion but this time we could not open EPM application library, dimension library, job console etc. We got the following error:
    (404)Not Found
    (org.apache.axis.AxisFault)
    Details:
    Trace: com.hyperion.awb.web.common.BaseService.openSession(BaseService.java:112)
    com.hyperion.awb.web.common.BaseAction.checkWebSession(BaseAction.java:64)
    com.hyperion.bpm.web.common.BaseAction.execute(BaseAction.java:65)
    org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:421)
    org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:226)
    Exception org.apache.axis.AxisFault rethrown
    When we try to access EPMA directly from <http://localhost:19000/awb/> we get the following error with the one above:
    Module not found:awb.appcontainer
    We raised an SR and searched the forum and the issue was pointed to the IIS, but we checked it and cannot find anything out of the ordinary there. If anyone has any ideas, help would be appreciated, we're in a pickle =(

    Hi Sourabh,
    I am not sure of exactly which settings were changed because a number of changes were made by Oracle Support themselves, but the documented steps are as follows.
    In our IIS Manager under servername the websites expanded to 'Hyperion' which was our hyperion virtual directory. As per System 9 Installation and Configuration Guide, we need to have EPMA connection pools and Virtual Directories as "hyperion-bpma-server" so they first stopped EPMA services then:
    1. Reconfigured EPMA using Configuration utility.
    2. Altered the connection pool and Virtual Directories as hyperion-bpma-server
    - Our application pool only had DefaultAppPool, so a new pool was created as 'bpma' > 'hyperion-bpma-server'
    - The 'Hyperion' virtual directory was deleted, new website was create as 'Default Web Site' with C:\Inetpub\wwwroot as local path. Under 'Default Web Site' a new virtual directory was made as 'hyperion-bpma-server' with local path C:\Hyperion\BPMA\AppServer\DimensionServer\WebService and selected 'bpma' as its application pool.
    3. Configured virtual directory settings.
    4. Copied bin & temp folders from our Production EPMA server path C:\Hyperion\BPMA\AppServer\DimensionServer\WebService, since these folders did not exist in our test server.
    5. Restarted IIS
    6. Restarted Web Server(Apache)
    7. Started the EPMA Services.
    Logged into Workspace and Application Library and Dimension Library were accessible, and we successfully created and deployed our applications.
    Hope this is helpful for you.
    Regards,
    Noreen
    Edited by: 858772 on Jul 27, 2012 1:15 AM

  • Need to restrict some hierarchy in RTP member selection

    Hi There,
    We are using on rule which conatins RTP variable.As per our requirement while selecting that RTP varaibale member through member selection window can I restrict the dimension hierarchy to only level 0 members as there are many levels in this dimension and we only want level zero members list to select from them.
    I have tried with @levmbrs(dim,0) in Limits section but without success.
    Thanks

    Thanks Alp for your prompt reply.
    I tried this option but nothing happened.Do you think by using the limit in variables(RTP) the pop up window while launching the rules will contain only the level 0 members as I described in the limit section ?
    For example: The dimension hiearrchical structure is as below and I need to show only Entity11,Entity12,Entity21 in the member selection window .Currently it is showing the below structure in the pop up while clicking the member selection icon.
    Entity
    -->Entity1
    ------>Entity11
    ------>Entity12
    -->Entity2
    ------>Entity21

  • End Planning Run After Order Selection - issue not clearing down all plans

    Hi,
    We are using the CTM Profile with "End Planning Run After Order Selection" ticked in the basic settings tab in order to clear down previous CTM runs. So we have a CTM deletion profile.
    The issue is that it requires more than one execution to clear down the Planned Orders / Purchase Requisitions. You execute the Deletion CTM Profile once and it will clear down some of the Purchase Requisitions and Planned Orders and leave some still in place. You then have to execute the deletion CTM profile one or two more times in order to delete the remaining Planned Orders / Purchase Requisitions.
    This is clearly not realiable for a batch process to clear down plans. Has anyone else experienced this and does anyone have a solution. The solution cannot be based on RLCDELETE or /SAPAPO/DELETE_PP_ORDER
    Mark

    Hi,
    Can you check your planning mode and deletion mode combination defined in the ctm profile.
    Prerequisties for deleting the orders:
    u2022 They are within the planning and deletion periods
    u2022 They do not have pegging relationships with demands outside of the planning period
    They lie outside of the production horizon, stock transfer horizon and the planned delivery time
    In addition, all location products of an order must be included in the Master Data Selection so that CTM can
    delete the order. Also, CTM cannot delete any manually fixed orders.
    If you have selected the SNP Order order type in the CTM profile, CTM cannot delete any PP/DS orders. This
    restriction is also valid the other way round for the PP/DS Order order type. If you select this order type, CTM also
    deletes SNP orders.
    Thanks,
    nandha

  • Need the the underlying table names which the Material Plan Detail Search p

    Our supply planning users would like to obtain the demand and supply plan for a bunch of given parts by running a query against some tables. The data they need via a PS Query output in Excel format is the same data that is provided by the Material Plan Detail page in PeopleSoft Supply Planning (Menu Path: Supply Planning >>>Solve Plan>>>> Material >>>>>>Material Plan Detail). The main underlying table behind this page is PS_PL_MRP_DTL.
    The problem is that this table contains data for only one Part Number (INV_ITEM_ID). The data is populated when Item ID is selected on the Material Plan Detail Search page.
    What are the underlying table names which the Material Plan Detail Search page brings together to present the information for the selected part number on the target page (The Material Plan Detail page)?
    If you could tell us the underlying table names (which the Material Plan Detail Search page brings together) we can write a query to present the data to the users for multiple part numbers at a time and not just one part number at a time.
    Any help would be greatly appreciated.
    We are on FSCM 8.9 Bundle 13
    Thanks in advance.

    The ERD's for FSCM 8.9 are available from following link
    PeopleSoft Enterprise Financial Management 8.9 Entity Relationship Diagrams [ID 979359.1]
    https://support.oracle.com/epmos/faces/DocContentDisplay?id=979359.1
    Hope it contains the info you are looking for.
    Hakan

Maybe you are looking for

  • DVD Player not playing discs

    My DVD player won't play rental dvd's etc .. I get a message saying "Supported Disk Not Available" I have successfully played on 2 dvd's on this machine (it's only 2 weeks old) and each of those times i got a message asking my permission to change th

  • How to add an external CSS file in master page

    Hi, We're running a SharePoint 2013 (Office 365) team site. I'd like to use the same formatting in all my site pages. I currently use a script editor web part to apply the formatting changes which is cumbersome. How can I utilize a css file so that a

  • How do I close Mozilla Firefox in order to instal an update of Adobe Flash Player?

    I installed FF very recently at the recommendation of Blue Mountain.com as I was unable to send their e-cards with messages. Now I'm trying to update Adobe Flash Player and cannot do so because of the message 'close Moxilla Firefox to continue'. I've

  • Help with turnig off nano and short songs (PLZ HELP!!!)

    i have no idea what any of this stuff is with discussions but i need help. 1) my iPod won't turn off. I have held down the pause/play buttin and have also left it alone on pause for over an hour and it still wont turn off. all other buttons work just

  • HT4199 i try so many method time. dosnot wark wi fi.

    hi my 3month old iphone4s. i had buy from tmobile contrack. this phone cant conect wifi. i try so many method, rest all, and restore, new update, and all, its not swoing any netwark.