Hyperlinks with "?" symbol

Hi,
I have InDesign CS6, it is running on Windows 7 Home Premium.
I created a document in Indesign and I had to put some long link. The links contain symbol: "?". These links doesn't work in the exported pdf. Please help!
Thanks in advance,
Angela

Thank you for your help, I tested the link on the Hyperlinks panel. I pressed the right arrow and it is not go to the website: II Congreso Edificios Energía Casi Nula - CONSTRUIBLE, instead it goes to: 404 - CONSTRUIBLE

Similar Messages

File name with symbols won't delete from trash.cache\trash\cache folder.

found this weird file name with symbols (squares nad the like) in the trash.cache\trash\cache folder. Can't seem to delete it from windows, can't get at from the dos prompt. Windows safe mode won't delete it.
Any suggestions as to what it is and how to get rid of it.
At present am trying reinstall of firefox and virus scan.
Thanks
Peter

I tried to do the instructions Adobe gave me but when
I put in the disc that came with my mac and hold down
C when it restarts it takes me to the screen to do a
fresh install.
At that point go to the Menu & select Disk Utility - I can't remember exactly which menu but you should be able to find it easily... there isn't too much there
I went into the disk utility through the Apps folder
and for somereason the option to repair isnt
highlighted and it wont let me click it. I tried to
repair permissions/verify but it doesnt change
anything. I looked at the info and it says the volume
can be repaired, but it wont let me.
You can't Repair the disk the system is currently running the OS from - That's why you have to boot from the Installer disk (or some other start-up disk). Repair Disk addresses directory structure issues - totally separate from what Repair Permissions does.
HTH|:>)
Bob J.

While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808

Hyperlink with an action 'Go to a page in another document' in IE browser.

When the PDF Document is opened in IE, Clicking on a Hyperlink with an action 'Go to a page in another document' is not navigating to the proper destination page.
This happens when the destination document is already opened in IE once and cached.

Hi Vinayaka,
I am unable to replicate this at my end. I am using Acrobat 11.0.10 on Windows 7 and IE11
Below are the steps I followed :
Create a link and select the "Custom link" option, click "Next", select the "Options" tab, select "Go to page view", click the "Add: button, open the file to the page you want to link to, click the "Set link" button.
Regards,
Rave

Hyperlinks with "#" don't work in PDF from PowerPoint

I'm creating a PDF from a PowerPoint 2010 file and hyperlinks with a "#" in them aren't working. The "#" character is being removed from the link. For example a link to http://mysite.com/home.htm#anchor becomes http://mysite.com/home/htmanchor. I have Creative Cloud and installed Acrobat Pro XI today. I used the Create PDF button on the Acrobat ribbon.
Does anyone have a solution?

Ahhh, the slippery slope of perception.
Yes, "#" has a specific use when with HTML .
And "#" has a specific use when with MS Office applications.
And "#" has a specific use with PDF using Acrobat / Adobe Reader.
The specifics of each?
For HTML see what W3C and the related RFCs speak to.
For MS Office see what Microsoft's dev space & Office info speaks to.
For Acrobat / Reader see "Parameters for Opening PDF Files".
http://wwwimages.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/pdf_open_parameters_v9 .pdf
In each environment "#" means something different, does something different.
In each environment, when used correctly, "#" performs as designed.
The point is the "design" is In Fact different in the different environments.
So the "SOF" -- Nothing is broken.
Be well...

In Each field space should be replaced with @ symbol in DME File

Hi,
I configured DME file it good, but client wants in each field SPACE should be replaced with @ symbol
i created new DME file with DMEE transaction code
here it example
we have a bank account number filed length is 20 Digits but bank account no is 15 digits only remaing 5 filelds should be replaced with @ symbol
Kindly advice me on this
Thanks in advance
Regards
Kumar

Hello,
i could follow the link below. More or less my requiremnt is same
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=201066680&focusedCommentId=247136560&#comment-247136560
Howeevr, the changes in my requirement are
The location field has to be populated with account name and the address of that account. In this scenario, i have the acoount name from the same page, but the account address is stored in account. i need to retrieve the data from account and append it with the account name and display it in location.
Please help me on this.
REGARDS
CHANDRAKANT KULKARNI

Hyperlink with tracking applied does not work in PDF

We use lots of web addresses in our advertising and generally the web addresses automatically convert to hyperlinks when we distill the files and make PDFs. Recently we've had two instances where someone applied tracking or justification to the line of text containing the url to make it spread across the page. When we make our PDF the url is not clickable. Is there anyway around this? We tried actually creating a hyperlink manually in InDesign by using the Hyperlinks panel and entering the address, but that didn't work either.

Peter,
We'll look into that. We already do two separate PDFs for print and web, but
we are distilling both right now. Wouldn't be too much of a problem to
change to exporting the web version I don't think.
I did a test, just curious, is there a way to keep it from putting a black
box around the link on the PDF?
Thanks for your help! We appreciate it!
Beth
From: Peter Spier <[email protected]>
Reply-To: <[email protected]>
Date: Fri, 14 May 2010 13:24:04 -0600
To: Beth Phillips <[email protected]>
Subject: Hyperlink with tracking applied does not work in PDF
Distilled PDF uses Postscript which does not support hyperlinks and
interactivity. To make your hyperlinks in ID you'll need to export and check
the Include Hyperlinks and Include Interactiviity boxes.
Your printer doesn't need hyperlinks because they don't work on a printed
page. The requirements for print and interactive PDF are quite different, and
you may find you need to make two versions.
>

Word Import - Hyperlinks with #

All:
I just downloaded and installed the trial version of RH 9.0. I'm trying to import a word document into RH HTML project. The word document has lot of hyperlinks and 90% of the hyperlinks contains # in it. (For eg: https://www.something.com/index.html#wpasder). The hyperlinks with # are not getting properly imported into RH. All other hyperlinks without a # are getting imported properly. When I checked the HTML code the href is set to "" <blank>.
Anyone had any issues like this before? If any solutions or work arounds available, please let me know.
PS: I'm relatively new to RH tool...
-Thanks in advance, arun

I am encountering the same issue in RH10. Hyperlinks that include a # for page bookmark do not import from Word to RH.

Rollover and click event with symbols keyframed in timeline

Concerning the active state of rollover(mouseenter/mouseleave) buttons in Edge. I've set up a grid style animation with symbols.
I've got the composition, triggers, labels, mouseenter and mouseleave with symbols working just the way I'd like but my issue is keeping the button active after clicking and the mouse leaving. As it is now, when the mouse is clicks it plays the animation I want but when the mouse leaves the button doesn't stay 'active' indicating the portion of the grid the user is seeing. And adversely when the user clicks a different button the previous 'active' button needs to be 'inactive'. I'm useing keyframes of the color value, black to white, white to black with labels on the timeline.
What is the method or code to accomplish this?
Below is pics of my actions.

Concerning the active state of rollover(mouseenter/mouseleave) buttons in Edge. I've set up a grid style animation with symbols.
I've got the composition, triggers, labels, mouseenter and mouseleave with symbols working just the way I'd like but my issue is keeping the button active after clicking and the mouse leaving. As it is now, when the mouse is clicks it plays the animation I want but when the mouse leaves the button doesn't stay 'active' indicating the portion of the grid the user is seeing. And adversely when the user clicks a different button the previous 'active' button needs to be 'inactive'. I'm useing keyframes of the color value, black to white, white to black with labels on the timeline.
What is the method or code to accomplish this?
Below is pics of my actions.

Hyperlink with a website

kindly guide me how to create hyperlinks with a
website

Read DW's F1 Help about how to create a hyperlink. It's very
easy and
clear.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"pandeya" <[email protected]> wrote in
message
news:f66ih2$5sr$[email protected]..
> kindly guide me how to create hyperlinks with a website

Working with symbols more easily | Learn Illustrator CS5 | Adobe TV

Explore ways to work with symbols in Illustrator CS5, such as how to specify and control registration points, work with smart guides, reset a symbol's instance, and work with layer structure.
http://adobe.ly/AkBLjP

One point Mordy did not make in this excellent video is the ability to "nest" symbols. If the "tag" was a separate symbol it could be updated without altering each label symbol.

Hyperlinks with Flash

I am making a CD ROM with Flash 8 and I need to have
hyperlinks that will go directly to a site if the user is
connected. I've never actually made a hyperlink with Flash before
and was wondering if anyone could advise me on how to go about
it?

sprecks1 wrote:
> I am making a CD ROM with Flash 8 and I need to have
hyperlinks that will go
> directly to a site if the user is connected. I've never
actually made a
> hyperlink with Flash before and was wondering if anyone
could advise me on how
> to go about it?
getURL action is all you need...
Regards
Urami
Happy New Year guys - all the best there is in the 2006
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free>

Regex to find word starting with $ symbol.

Hi,
I want to find all the words in a JTextPane starting with "$" symbol followed by alphabets or digits.
Below is the code, which I have written
public void matchAllWords(String textPaneData) {
     String regexStr = "\\b(\\$?(\\w+))\\b";
     Pattern p = Pattern.compile(regexStr);
     Matcher m = p.matcher(textPaneData);
     while (m.find()) {
           System.out.println(m.group());
}Suppose the text pane data is
hello $world 2$ $test_string $50.0 $5*5
I want the method to match the following words
$world
$test_string
$50.0
But the program is printing:
hello
world
2
test_string
50.0
5*5
Please help me, where am I going wrong.
Thanks in advance.
Regards,
Vaishakh
Edited by: Vaishakh on Sep 16, 2009 4:24 AM

Thanks, as u said http://www.catb.org/~esr/faqs/smart-questions.html#writewell
How To Ask Questions The Smart Way
Eric Steven Raymond
Rick Moen
Write in clear, grammatical, correctly-spelled language
We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal - in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.

Working with Symbols

I am trying to work a little with Symbols. There has to be a way to edit the contents of a symbol. I am not seeing it. Everywhere I go it seems to dead end with only being able to create or delete instances of a symbol, what am I missing here?
Particularly, to start of simply, I am trying to hide and show layers inside of a symbol object. It seems there would be something, maybe even a reference to a new document or something.
Any help would be appreciated.

How about:
1 duplicate an instance to new document, this also duplicate the symbol
2 remove the symbol so instance become editable objects
3 edit it and re-create the symbol
4 copy back to origin document and replace the symbol (everySymbolItem.symbol = newSymbol)
5 close new document, remove origin symbol, rename to origin name

Looking for "Replace with Symbol" script

So I am trying to replace gps points with a symbol I have created. I have found blogs referencing a script that can replace selected items with symbols saved in the symbols panel, but I can't seem to find the actual script! If anyone knows where I can find JET_ReplaceWithSymbol.jsx or any other script that can do the same function, it would be greatly appreciated!

Hi CarlosCanto ( & Muppet Mark ;-),
First of all I apologize, as I only started this Illustrator scripting a few weeks ago so sorry for my ignorance to things thus far. Its actually been going pretty well, but many things seem to elude me while others seem to be beyond me at this point.
Thanks so much for the additional info CarlosCanto, tags.length worked to get around that issue. I also was able to zero out the rotation (which took some research and further headache) before gathering the width/height (* however see below). It now seems to scale accurately, but given the ratios of the original and new items it seems to locate top left and fit from there proportionally (* see below) perhaps due to the scale ratio part of the code?. So thanks so much for the heads up on both the tags.length and zeroing out rotation before hand, both helped. So I am inching along to further confusion and headaches. ;-) Is there a resource where can I find more detailed information about these "tag" assignments/values, I find little nuggets on the forum and some info in the Scripting Reference but was hoping to see maybe more detailed information if it exists.
* Does the rotation tag get assigned to anything that has been rotated via the IDE as well also already rotated via obj.rotate(num) through code? To me it seems that items rotated with rotate() previously via javascript don't contain this tag, nor do Effect - Transform items, I cant target it to zero the rotation or rotate them to the previous rotation value? I cant seem to replace and retain rotation for something that has been rotated through code with rotate() already or via the Effect menu. But maybe I am wrong an just don't know how to target those, I am fumbling so much with this code trying to get it to work at all and trying to get all scenarios to work, I fix one break another, almost to the point of throwing in the towel and giving in to confusion. :-( I have tried so many things that I am even confused writing this as to what works, what doesn't, why, why not, at this point along with how to explain it. ;=) Forgive me. Ugh, I am at a loss, this whole rotation property seems rather challenging compared to the others given this request for outcome.
My basic tests are as follows, I have been testing everything (even through possibly redundant), as I need this to work with ALL scenarios if possible. ;-)
So far it works with these:
- items rotated manually with the mouse
- rotate tool
- the transform window
- right click transform
- Ojbect - Transform - Rotate
So far these do NOT work in retaining the present rotation:
- Effect - Distort & Transform - Transform - Rotate ( Also: scales fine but offsets its position, towards TL? )
- Items rotated via Javascript using obj.rotate(num) ( Also: scales larger when replaced? )
- When I run the script again, specifying a different symbol the rotation is lost
- When I use symbol replace after applying the script the new replaced symbol does not retain the scale
I hope I have stated those correctly, I have done so many tests with so many factors, approaches and code variations that I am thoroughly confused. So that seems to be the status update thus far, this whole rotation property seems rather challenging compared to the others, I guess since so many other factors are involved when that property is involved. I wish rotation was just rotation and could just be read and manipulated more easily. I was curious, even though it is beyound me, does using matrix transforms make this all easier and more straight forward vs tags or are both rather convoluted?
So am I spinning my wheels thinking this approach can be achieved across all those scenarios? Any thoughts, feedback, code, or entire solutions :-) are welcome at this point. Thanks so much to CarlosCanto and everyone else, I greatly appreciate it.

Hyperlink with the following characters: ù, ò, è, à and ì

Hello All,
I have problems with PDF files and Adobe Reader 11.0.2: the hyperlink with the following characters: ù, ò, è, à and ì, are not working.
This problem looks like the "CR" in file name with versione X (http://forums.adobe.com/message/3791868), that's a strange mistery... :-(
Using older versions of Adobe Reader the links work correctly.
Thanks in advance for the support,
Andrea

These characters are not permitted in a URL. This rule is not made by Adobe, but by the people who invented URLs. They might work as you wish but the behaviour is undefined (that is to say, there is no correct behaviour, and giving an error or rejection is one possibility). I suspect that recent versions of Adobe Reader forbid the forbidden characters for security reasons.

Hyperlinks with "?" symbol

Similar Messages

Maybe you are looking for