I am developing a site where the content is 1300 pixels in depth but the browser background is 2500 pixels in depth. I want the browser background to be just a little longer than the content, but cannot seem to make that happen. Does anyone have an idea
I am developing an iWEB site where the content is 1300 pixels in depth but the browser background is 2500 pixels in depth. I want the browser background to be just a little longer than the content, say about 1340 pixels, but cannot seem to shorten the browser measurements. Does anyone have an idea how I can solve this problem? I have tried to make height adjustments in the Page Layout section of the Inspector, but content height heading has no affect on anything. I have built about 75 sites in iWEB and this is my first experience like this.
That is a legitimate Mozilla newsletter. As it says in the email:
You're receiving this email because you subscribed to receive email newsletters and information from Mozilla. If you do not wish to receive these newsletters, please click the Unsubscribe link below.
Unsubscribe https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/
Modify your preferences https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/ "
Similar Messages
-
Hi, I cannot restart or shut down my MAC and get the message Geneio.it installer is cancelling your request. Please shut down and retry. However, I cannot seem to exit that application and I have no idea where it came from. Thanks
Could this be a virus?Hold down the Power button until the computer shuts down.
The Safe Mac » Adware Removal Guide - Genieo
The Safe Mac » Adware Removal Guide
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
the most successful malware attacks rely on very sophisticated social engineering
techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
your computer is intended to entice you to install their malware thinking it is a
protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware. -
My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not. The error message indicates an unknown error has occurred, with error code 6. Does anyone have any idea what the problem might be and how to solve it? Many thanks.
Hi
I followed this guy's instructions and it worked:
http://evsiphone.blogspot.com/2009/05/iphone-iphone-could-not-be-restored.html
I did disable the security (AVG and Zone Alarm) when I tried on my own PC. My wife's laptop which eventually got it working also uses AVG and Zone Alarm but on an XP O/S whereas my PC is Vista - maybe this is why.
Cheers for you help.
Andy
Message was edited by: bigbadandy -
My ipad 2 will not connect to the internet I've tried to manually enter it but its not recognising it or finding any connections. I've reset it to factory settings twice and its not clearing it. Does anyone have any ideas??
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I have the latest photoshop cc 2014, but i dont see perspective warp in it, does anyone have an idea why
As you can see, its in Dutch, please comment
-
I have installed a trial of Adobe illustrator on my macbook pro. It is the 2014 release of adobe illustrator. I want to trace an image using the custom trace button.
I start a new document. Then I place my scanned pencil/colored pencil drawing, in to the document. I have tried scanning and then placing it as a jpeg, bitmap, and tiff file. I have tried scanning and then placing it, in color and in black and white. The scan mode I use is flatbed. Adobe illustrator allows me to select the default button and one of eleven preset buttons (e.g high fidelity photo), but it does not allow me to click the custom trace button. The custom trace button is grey while all the other buttons are white.
Does anyone have any ideas how I could custom trace?It seems pointless to adjust it afterwards because it is then only a couple a pencil lines rather then a full drawing. And how do I adjust it afterwards? Would I do this using the different buttons under the window button?
-
I am using Logic Pro 9 with two MXL 990 microphones in my piano and a Rode NT1A for vocals. I have tried recording with added reverb and keeping getting not a natural reverb sound, but a rather "pixilated" one that does not sound natural. Does anyone have any ideas on how to solve this issue? I have tried using Silververb and Space Designer, and both result in the same problems. Thank you!
This is asking for the impossible! It does not sound natural because maybe it isn't and in judging so whats your reference anyway. If you are in dire need of some natural sounding room you can go and record it yourself. But even then, the chances that it sounds like you imagined it, are very slim.
There are very decent sounding reverberation plugins, based on artificial reverb generators or convolution-style, the last one is said to sound more 'natural' then the first one. Be it as it maybe, it really is like cooking food. You got all the ingredients for this delicious taste at hand and believe it or not to reach a satisfying result this is not enough, because if you do not mix the ingredients in the right proportion you will end up with a different dish you thought you'll get. This is exactly the same when one would mix audio, I dare say.
So treat yourself to some good ingredients and the rest is up to you, namely: taste and experience!
And looking at some of my past music productions I always find the same plugins for the 'ambient' task:
Altiverb by Audio Ease when I have acoustic ensembles (classical music mostly), the Sony Oxford Reverb in studio productions, Bricasti when I have to deal with drums and MMultiBandReverb from MeldaProduction for all-round stuff. Thats the base I start from, after that I can end up with dozen Reverb plugins which basically all are doing the same thing but just in a tiny different way. -
Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?
rtilghman wrote:
telling me to buy a new router is NOT a solution.
And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle? -
I've been working on our church website and all of a sudden this week, my computer will not connect to the site. I keep getting a message saying that the the connection to the server was reset while the page was loading. Does anyone have any ideas of how I can fix this?
The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
*[[/questions/918127]]
*[[/questions/918028]] -
I cannot see my Iphone 4 in my device window in the finder anymore. It use to appear so I could copy the camera pictures off of it and transfer them to other folders. Does anyone have and idea how to get it back when you plug it in initially. Thanks
You will want to open iPhoto, go to the iPhoto menu and select Preferences. Under the General tab, next to Connecting camera opens: select iPhoto. Close the preferences and quit iPhoto. Reconnect your iPhone 4. iPhoto should open automatically and offer to import your pictures. Import them and then do what you want with them.
Best of luck. -
In my email all the messages from one person bunch together and I would like to separate them. I have done this before on my iPhone but just recently got an iPad and its doing it on this, so does anyone have any ideas how to fix this issue?
Settings >> Mail, Contacts. Calendars >> Organise by Thread. Switch to OFF to see every individual email in the Inbox.
-
I cannot order photo prints from iphoto. Error says that the delivery address is in an unsupported country. The address and my account are in the UK. Does anyone have any ideas?
I cannot order photo prints from iphoto.
Are you trying to print from iPhoto on your Mac or iPad/iPhone? If you are trying to print form yor Mac, check, if the Print Products Store in the iPhoto Preferences > Advanced is set to U.K.
Also the bimmling address, Delivery address, the country for your AppleID and Credit Card must all be in the same country. Check this document:
http://store.apple.com/uk/help/print_products
-- Léonie -
I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?
My purpose for copying to a CD or DVD is so that I can make copies and send to friends and relatives. What is the best way to get these files on a CD/DVD with the right codecs?
The easiest thing to do is to simply tell your friends and relatives to copy the files to their local hard drive before playing them. Your basic problem is that data discs have a limited real time transfer rate. Since you say VLC plays the files fine, I might suspect its player is likely buffering the data while the QT 7 Player is not.
Data discs made for playback directly from the CD or DVD are normally encoded using MPEG-4/AVC (H.264) video with AAC audio. This is a modern codec which has specific settings to re-package the data (i.e., must be encoded using the multipass option and then select the "optimize for CD/DVD" option). -
Im having a problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges/lines in the video specialy if i have titles it comes up really bad , I took the same video to a friend of mine who have PC and he uses Encore , did the encoding there and it was just fine no problems! BTW I tried using doferent setings in compressor from CBR and VBR I even pushed up the setings to 8 or 9 BR and still no luck !
does anyone have any idea ?
Thanks in advence ...Let's focus attention on just the Sony. (What model and what resolution are you shooting?)
For now, I'll assume you're shooting 1080i.
Take a representaive clip into a new sequence. Add a title.
In your sequence, make sure field dominance is set to Upper.
Set render settings to Pro Res 422.
After rendering, export QT self contained.
Import into Compressor (I'm now referring to v3.5).
Select the 90 minute Best quality DVD preset.
Open frame controls and turn on (click the gear icon). Set Resize filter to Best.
Submit burn and check quality on TV.
Good luck. -
I am usually fine with my apple tv. However, quite frequently I get the message that apple tv cannot access apple store. i go to my Ipad or Mac computer and I am able to acess apple store easily. Does anyone have an idea on what is wrong?
Have you tried connecting it with an ethernet cord? It could be a wifi issue.
Maybe you are looking for
-
Mapping windows 7 to the Xserve
I have an quad core 2.26GHZ xserve and my issue is this: When Windows 7 Pro machines map to a share on the server any folder they try to access times out for about 15sec to 1min but will eventually open the folder and let the user access the files wi
-
I'm developing a cash card app which will need to store transactions on the card. Basically it may make several cash transactions with terminals that are not connected to the internet (and thus can't sync) and once in a while the user will interface
-
Maintenance of PO using tcode MASS
Hello, I wanted to modify the contract field which is disabled in ME22N. So i used the transaction MASS to do it. From this transaction i get a message that the PO is modified. But when i check in the PO via transaction ME23N, the contract details ar
-
How to move profiles.ini in firefox
I need move profiles.ini to D:\backupfirefox i use mklink to move profiles.ini But i have error. When i run firefox.exe, firefox will create new profiles How to fix it. I need move profiles.ini. I need backup list folder profile
-
Can scroll wheel be stopped in Quicktime export?
I make Keynote presentations for my students to run through with hyperlinks (buttons) as a means to navigate. I export to Quicktime, so that I don't have to rely on Keynote being on their computers. Yet, Keynote or Quicktime gives one the ability to