I am getting error while accesssing Oracle database
i am trying to learn by playing around with '
MORTGAGE LOAN APPLICATION.
in database i have taken oracle.
when i try to fire following query:
select * from customer where custId={$ /process_data/@custId $}
i am getting following error:
Exception: Internal error.. Cause: ALC-DSC-000-000: com.adobe.idp.dsc.DSCRuntimeException: Internal error.
Mehul
I've not worked with Oracle but I'll give this a shot. Try the following:
1) If the database you are querying is transcational, add the text (without quotes) "WITH (NOLOCK)" as part of your FROM clause. It may be possible for your DBAs to have set that any queries run without this to be rejected since it would result in locking the table.
2) I assume, by your query, that custId is of an integer type but if it is varchar (String) then make sure to put your single quotes around the parameter afte the '='.
I would ask the following:
Where are you firing the query from? Are you doing it as part of a webservice the form is connected to or are you doing it inside Workbench using one of the JDBC services (or another means)?
Josh Boyle
[email protected]
Cardinal Solutions Group
Similar Messages
-
Error while installing Oracle Database Lite 10.2.0.1.1 for Win
Hello,
I am trying to install Oracle Database Lite 10.2.0.1.1 on Windows XP. I am going according screens on this page:
http://www.oraclebrains.com/2008/07/installing-oracle-database-lite-10g-release-3-mobile-server/
But at Step:12 - Mobile Server repository Wizzard after password enter I get error --- Io exception: The Network Adapter could not establish the connection. May I insert specific password for Username SYSTEM? Or where is problem?
Thanks for hint
DavidHi,
I have the same problem but, how can i know what my SID is ? i am trying with "ORCL" and it doesnt work.
Do you know in which file i can get it ? in the documentation of the installation i found this:
"If you are not sure of the values to enter for the URL, then you can query the data dictionary to obtain these values.
Connect as SYSTEM and run the following queries.
To retrieve the SID, execute: select instance_name from v$instance;
If you need to retrieve the port number, check the listener.ora file on the
back-end database."
But how can i query the database if i have not finished to install it yet and where is located the listener.ora file ?
I hope you can help me.
Thank you. -
Error while adding oracle database resource to the fail safe group
Hi,
we are installaing ERP 6.0 EHP4 , oracle10.2.04 in MSCS
During the step, Adding the oracle Database Resource to the fail safe
group , I am getting the error.
28 13:21:57 ** WARNING : FS-10288: Parameter file C:\oracle\BCP\102\database\init<SID>_OFS.ora is not located on a cluster disk
29 13:21:57 ** WARNING : FS-10404: The database uses a nonclustered disk in one of the system parameters. Value of parameter is C:\ORACLE\<SID>\102\RDBMS\AUDIT
30 13:21:58 ** ERROR : FS-10036: The resource uses disk SAP HDD, which is also used by cluster resource SAP VIP in another group
31 13:21:58 ** ERROR : FS-10778: The Oracle Database resource provider failed to configure the cluster resource <SID>.WORLD
32 13:21:58 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
33 13:21:58 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
34 13:21:58 FS-10488:<primary node name> : Starting rollback of operation
35 13:21:58 > FS-10090: Rolling back Oracle Net changes on node <primary node name>
I am having one local disk C: one shared disk Z: and quorum disk Q:
Shared disk Z: is already used for SAP<sid> group.
Regards,
JoelJoeldhanaraj wrote:>
> Hi,
>
> we are installaing ERP 6.0 EHP4 , oracle10.2.04 in MSCS
>
> During the step, Adding the oracle Database Resource to the fail safe
> group , I am getting the error.
>
> 28 13:21:57 ** WARNING : FS-10288: Parameter file C:\oracle\BCP\102\database\init<SID>_OFS.ora is not located on a cluster disk
> 29 13:21:57 ** WARNING : FS-10404: The database uses a nonclustered disk in one of the system parameters. Value of parameter is C:\ORACLE\<SID>\102\RDBMS\AUDIT
> 30 13:21:58 ** ERROR : FS-10036: The resource uses disk SAP HDD, which is also used by cluster resource SAP VIP in another group
> 31 13:21:58 ** ERROR : FS-10778: The Oracle Database resource provider failed to configure the cluster resource <SID>.WORLD
> 32 13:21:58 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
> 33 13:21:58 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
> 34 13:21:58 FS-10488:<primary node name> : Starting rollback of operation
> 35 13:21:58 > FS-10090: Rolling back Oracle Net changes on node <primary node name>
>
> I am having one local disk C: one shared disk Z: and quorum disk Q:
>
> Shared disk Z: is already used for SAP<sid> group.
Hi Joel,
how about following the advice given by the error message and moving the mentioned files/folder (init<sid>_OFS.ora, AUDIT folder) to a clustered resource disk?
just my 2 pence... -
Oradim error while initializing oracle database instance
I am trying to install the Oracle 91 personal edition for windows 98 on a windows Me PC. After all the files for the database are copied, I get an error for the file "Oradim" and then a prompt to close all programs and restart my PC. Restarting the PC does not help me either.
Thanks in advance for any help.
regards
Parthauser8484066 wrote:
when installing oracle database 11gR2 on windows 7 64-bit following error is occuring.
G:\app\DELL\product\11.2.0\dbhome_3\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
Error? What error? I don't see an error. I just see the name of a file.
Fortunately we've all seen that file name enough to know what your error is anyway
I have downloaded this file from
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Can anyone help me in this.You failed to follow the download/install instructions at two different points.
The first was on the very page you cited as the source of your download, where it says
*"- Make sure to download and unzip both files to the same directory. "*
I'm willing to bet you a cold one that you either downloaded only one file, or you downloaded both files but unzipped them into separate directories.
The second point you missed was in the Installation Guide where it lists the acceptable Operating Systems under "Database Software Requirements". It lists all the various versions of Windows, including this line:
Windows 7 - Professional, Enterprise, and Ultimate editions
Notice the absence of any "home" editions . . . -
Getting Error while installing Oracle 11G in Win8 64bit OS
Hi All,
I am getting error (INS-13001 Environment does not meet minimum requirements) after I started installing the Oracle 11G Database in Windows 8 64bit.
A pop up is displayed with above message and Yes and No buttons. Can I continue eventhough the above message is displayed?
Please let me know whether Oracle 11G supports Windows 8 OS or not.?
also let me know, If any other alternative way to continue with 11G in Win8 OS
Thanks in advance your response on thisOracle 11g is not certified for windows 8.
You can also check in pre-requiste document from below link
http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDGJEJE -
Getting Error while installing oracle web cache
Hi all,
after installation of Oracle 9i Application Server version 1.0.2.2.2 on Windows 2000(NT based), while installing oracle web cache on AS following error appears after 96% of installation. Origin oracle database 10g is running on a separate PC in local network.
Updating User List
Adding users to the cache
Adding users to the cache failed.
Reason: WTE-03501 Error updating list of users:
Export failed on origin database.
OCI error - ORA-28595: Extproc agent : Invalid DLL Path
ORA-06512: at "SYS.WTCSYS", line 3
ORA-06512: at "SYS.WTCSYS", line 66
ORA-06512: at line 1
can anyone please solve this problem.
thanks.
regards.
fahad ejaz
email:[email protected]Hi Fahad,
I am sorry I am not sure what the solution to your issue is. However, I was wondering why you are not attempting to install Oracle 10g as opposed to 1.0.2.2.2?
I am guessng here but perhaps the 10g database is incompatible with a 1.0.2.2.2 install.
Hopefully someone else may be able to provide more useful feedback.
cheers
Nick -
Getting Error while installing oracle web cach
Hi all,
after installation of Oracle 9i Application Server version 1.0.2.2.2 on Windows 2000(NT based), while installing oracle web cache on AS following error appears after 96% of installation. Origin oracle database 10g is running on a separate PC in local network.
Updating User List
Adding users to the cache
Adding users to the cache failed.
Reason: WTE-03501 Error updating list of users:
Export failed on origin database.
OCI error - ORA-28595: Extproc agent : Invalid DLL Path
ORA-06512: at "SYS.WTCSYS", line 3
ORA-06512: at "SYS.WTCSYS", line 66
ORA-06512: at line 1
can anyone please solve this problem.
thanks.
regards.
fahad ejaz
email:[email protected]Hi Fahad,
I am sorry I am not sure what the solution to your issue is. However, I was wondering why you are not attempting to install Oracle 10g as opposed to 1.0.2.2.2?
I am guessng here but perhaps the 10g database is incompatible with a 1.0.2.2.2 install.
Hopefully someone else may be able to provide more useful feedback.
cheers
Nick -
Errors while installind Oracle Database 11gR2
At the step "Oracle Database Configuration Assistant i got the following error: link
And i don't know why, and what to do. Can you help me?
Thanks!
Edited by: Roger22 on 14.07.2010 20:25Wed Jul 14 20:38:54 2010
AUD: OS Error = 1502 encountered while writing audit record
AUD: OS Error = 1502 encountered while writing audit record
Starting ORACLE instance (normal)
Wed Jul 14 20:39:13 2010
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as D:\oracle\product\11.2.0\dbhome_1\RDBMS
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in client-side pfile D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ADMIN\ORCL\PFILE\INIT.ORA on machine ROGER
System parameters with non-default values:
processes = 150
nls_language = "ROMANIAN"
nls_territory = "ROMANIA"
memory_target = 816M
control_files = "D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ORADATA\ORCL\CONTROL01.CTL"
control_files = "D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ORADATA\ORCL\CONTROL02.CTL"
db_block_size = 8192
compatible = "11.2.0.0.0"
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=orclXDB)"
audit_file_dest = "D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ADMIN\ORCL\ADUMP"
audit_trail = "DB"
db_name = "orcl"
open_cursors = 300
diagnostic_dest = "D:\ORACLE\PRODUCT\11.2.0\APP\SORIN"
Wed Jul 14 20:39:18 2010
PMON started with pid=2, OS id=5252
Wed Jul 14 20:39:18 2010
VKTM started with pid=3, OS id=4052 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Wed Jul 14 20:39:18 2010
GEN0 started with pid=4, OS id=4392
Wed Jul 14 20:39:18 2010
DIAG started with pid=5, OS id=4924
Wed Jul 14 20:39:18 2010
DBRM started with pid=6, OS id=5692
Wed Jul 14 20:39:18 2010
PSP0 started with pid=7, OS id=5120
Wed Jul 14 20:39:18 2010
DIA0 started with pid=8, OS id=3532
Wed Jul 14 20:39:19 2010
MMAN started with pid=9, OS id=4196
Wed Jul 14 20:39:19 2010
DBW0 started with pid=10, OS id=504
Wed Jul 14 20:39:19 2010
LGWR started with pid=11, OS id=1252
Wed Jul 14 20:39:19 2010
CKPT started with pid=12, OS id=3776
Wed Jul 14 20:39:19 2010
SMON started with pid=13, OS id=5408
Wed Jul 14 20:39:19 2010
RECO started with pid=14, OS id=4776
Wed Jul 14 20:39:19 2010
MMON started with pid=15, OS id=4980
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Wed Jul 14 20:39:19 2010
MMNL started with pid=16, OS id=752
starting up 1 shared server(s) ...
ORACLE_BASE from environment = D:\oracle\product\11.2.0\app\Sorin
Wed Jul 14 20:39:19 2010
AUD: OS Error = 1502 encountered while writing audit record
Wed Jul 14 20:43:13 2010
AUD: OS Error = 1502 encountered while writing audit record
AUD: OS Error = 1502 encountered while writing audit record
Wed Jul 14 20:48:34 2010
alter database open
ORA-1507 signalled during: alter database open...
alter database mount
Wed Jul 14 20:48:41 2010
ORA-00210: nu se poate deschide fisierul de control specificat
ORA-00202: fisier de control: 'D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ORADATA\ORCL\CONTROL02.CTL'
ORA-27041: fisierul nu a putut fi deschis
OSD-04002: fişierul nu a putut fi deschis
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-00210: nu se poate deschide fisierul de control specificat
ORA-00202: fisier de control: 'D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: fisierul nu a putut fi deschis
OSD-04002: fişierul nu a putut fi deschis
O/S-Error: (OS 2) The system cannot find the file specified.
Wed Jul 14 20:48:43 2010
Checker run found 2 new persistent data failures
ORA-205 signalled during: alter database mount
...This is what that file contains
Roger.. -
Error while opening Oracle Database 11g Express Edition after installation.
After finishing the installation of Oracle database 11g Express Edition, when I tried to open it, it shows following error : windows cannot find `http://127.0.0.1:%HTTPPORT%/apex/f?p=4950`.Make sure you typed the name coorectly, and then try again.
What the above error means? I followed the installation steps as given in the link.Hi,
Follow thread may help you.
<<Newbie on running Oracle 11g - Windows cannot find http:something
Regards, -
Error while restoring oracle database by using brrestore command
Dear Experts ,
please check and give me your suggesitions on my issue
now we are trying to restore my oracle database from prd to quality
by using brrestore command
and it is terminated with an error at persent 30 %
error log
BR0278E command output of 'LANG=C dd ibs=64k if=/dev/rmt/ocbn of=/oracle/QAS/sapdata1/sr1_11/sr1.data11';
BR0359E Restore of /oracle/QAS/sapdata1/sr1_11/sr1.data11 from /dev/rmt/ocbn failed due to previous errors
BR0406I End of file restore
BR0404I brrestore terminated with errors
RegardsErshad Ahmed wrote:
Hi Swathi,
>
> Before performing the restore i would always restore control file from the backup to make sure that restore is working
Hi,
he already restored 30%, so I think we can safely assume at least some stuff did work.
Allthough I agree that since the controlfile is saved last, this is a good test.
Seems to be either a dirty tape (clean drive, repeat) or a faulty backup ( ugh ).
When you retry after cleaning, you can use -f (fillup) to save the restore from retrieving the files it allready got.
Check the initSID.sap for the backup & restore commands and esp. the bs= / ibs= / obs= options.
Volker -
Getting error while connecting to database
while i try to connect to the database i'm getting the foollowing error
java.security.AccessControlException: access denied (java.lang.RuntimePermission accessClassInPackage.sun.jdbc.odbc)
the part of my code which is used to connect to the database is as follows
<applet code="Part1" width=500 height=500>
</applet>
public class Part1 extends Applet implements ActionListener
public void init()
try
//Class.forName ("oracle.jdbc.driver.OracleDriver");
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
catch(ClassNotFoundException e)
System.out.println("EXCEPTION--"+e.getMessage());
System.out.println("DRIVER NOT FOUND");
Connection conn=null;
try
//Making the database connection
conn= DriverManager.getConnection("jdbc:odbc:xyz");
catch(Exception e)
System.out.println("EXCEPTION IN CONNECTION::"+e.getMessage());
System.exit(-1);
}public class Applet1 extends JApplet {
private JButton DbConnect = new JButton();
private JTextArea empValues = new JTextArea();
private Connection con;
private JLabel jLabel1 = new JLabel();
public Applet1() {
public void init() {
try {
jbInit();
} catch(Exception e) {
e.printStackTrace();
private void jbInit() throws Exception {
this.getContentPane().setLayout(null);
DbConnect.setText("Click to Connect to DB");
DbConnect.setBounds(new Rectangle(90, 225, 175, 40));
DbConnect.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
connectToDB(e);
empValues.setBounds(new Rectangle(40, 50, 310, 150));
jLabel1.setText("Emp Records :");
jLabel1.setBounds(new Rectangle(45, 20, 155, 20));
this.getContentPane().add(jLabel1, null);
this.getContentPane().add(empValues, null);
this.getContentPane().add(DbConnect, null);
private void connectToDB(ActionEvent e) {
try {
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
con = DriverManager.getConnection
("jdbc:oracle:thin:@localhost:1521:ora9202","scott","tiger");
empValues.setText("Connected to the Database.
Fetching Values from DEPT Tables.\n");
fetchValues();
} catch (SQLException ex) {
System.out.println("Connection Error = " + ex.toString());
} -
Getting error while creating standby database
I am creating standby database in oracle 10.2 on windows (same machine)and getting following error.Could any one please suggest me on this.
on primary database alert log file
================================================
Error 1031 received logging on to the standby
Fri Jul 17 18:09:23 2009
Errors in file c:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arc0_4512.trc:
ORA-01031: insufficient privileges
PING[ARC0]: Heartbeat failed to connect to standby 'IDR'. Error is 1031.
================================================
my LISTENER file is as below
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = Orcl)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = Orcl)
(SID_DESC =
(GLOBAL_DBNAME = idr)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = idr)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Gaurav-PC)(PORT = 1521))
and tns file is as below
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Gaurav-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
IDR =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Gaurav-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = IDR)
)recreate the instance at standby database without password file
oradim -new -IDR standby -startmode manual recreate password file at primary database , copy the same password file from primary database to standby database,also make sure primary database started with REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE parameter.
Check also the primary database is able to tnsping to standby database.
Khurram -
Getting error while configuring Oracle CEP server in Eclipse
Hi,
While Configuring OCEP Server in eclipse, and specifying the Oracle Middleware Home Directory as "C:/Oracle/Middleware/user_projects/domains/ocep_domain/defaultserver"; I am getting the below error:
The location "C:/Oracle/Middleware/user_projects/domains/ocep_domain/defaultserver" contains the BEA home definition file "C:/Oracle/Middleware/user_projects/domains/ocep_domain/defaultserver/registry.xml," but that file does not contain an Oracle CEP component entry with an "InstallDir" attribute.
I tried re-installing OCEP server, but still the problem persists. Please help me on this.
Regards,
Swati
Edited by: 999706 on Apr 30, 2013 1:08 AMHi Swati,
Please make sure you installed:
1) Eclipse Indigo SR2 for Linux: http://www.eclipse.org/downloads/download.php?file=/technology/epp/downloads/release/indigo/SR2/eclipse-jee-indigo-SR2-linux-gtk.tar.gz
2) Plugin in from the installation, the path like: Oracle/Middleware/ocep_11.1/eclipse-update-site/cep-tools=11.1.1.20130109-2314/. Note the plugin download site is not updated. So you can't use the install Plugin via URL
I assume you are using PS6. For other version, please check the document accordingly.
Thanks
Junger -
Getting error while running Oracle universal installer to run the deinstall
I am running oracle universal installer to run the deinstallation process and getting an error "java runtime environment was not found at C:\TEMP\OraInstall2011-11-14_01-31-42PM\jre\bin\javaw.exe hence oracle universal installer cannot be run. Please visit www.javasoft.com and install jre 1.3.1 or higher and try again"
Is there any workaround for this?This is regarding an issue while trying to unistall Fusion middleware (11g forms, reports) from the server.
I am running oracle universal installer to run the deinstallation process and getting an error "java runtime environment was not found at C:\TEMP\OraInstall2011-11-14_01-31-42PM\jre\bin\javaw.exe hence oracle universal installer cannot be run. Please visit www.javasoft.com and install jre 1.3.1 or higher and try again"
Is there any workaround for this? -
Getting Error while installing oracle 10g 1.0.2.0 on Redhat - linux 64bit
I am installing oracle 10g on Redhat 64bit (VM ware). In the middle it gives some error oracle Net services cancelled. Please see the error message below and advise.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser.dir=/u01/app/oracle/product/10.2.0/db_1/network/jlib -classpath /u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:/u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/10.2.0/db_1/network/jlib/netcam.jar:/
u01/app/oracle/product/10.2.0/db_1/network/jlib/netca.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/help4.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oracle_ice.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/swingall-1_1_1.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvm.jar:/
u01/app/oracle/product/10.2.0/db_1/network/tools:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt9.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt10.jar:/
u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/10.2.0/db_1/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /u01/app/oracle/product/10.2.0/db_1 /orahnam OraDb10g_home1 /instype typical /inscomp client,
oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /
u01/app/oracle/product/10.2.0/db_1/network/install/netca_typ.rsp
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.865231 wrote:
I am installing oracle 10g on Redhat 64bit (VM ware). In the middle it gives some error oracle Net services cancelled. Please see the error message below and advise.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser.dir=/u01/app/oracle/product/10.2.0/db_1/network/jlib -classpath /u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:/u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/10.2.0/db_1/network/jlib/netcam.jar:/
u01/app/oracle/product/10.2.0/db_1/network/jlib/netca.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/help4.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oracle_ice.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/swingall-1_1_1.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvm.jar:/
u01/app/oracle/product/10.2.0/db_1/network/tools:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt9.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt10.jar:/
u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/10.2.0/db_1/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /u01/app/oracle/product/10.2.0/db_1 /orahnam OraDb10g_home1 /instype typical /inscomp client,
oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /
u01/app/oracle/product/10.2.0/db_1/network/install/netca_typ.rsp
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.I thought the error message gave the advice already:
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.Looks like you canceled the pop up to configure your tns files. No harm, your database created just fine, but probably didn't configure listener.ora, sqlnet.ora, and tnsnames.ora. Just run netca and finish the tns confiiguration.
Maybe you are looking for
-
Emails from Outlook MS 2007 View as an Image not HTML
I am trying to find out why my emails that I create in Outlook 2004 as an HTML are recieved by Macbooks and other mac computer (LION and above) as an image file. This creates a problem for Mac users at my company. I need them to be HTML because there
-
How to get Current User from edir C#
Hi 1) Using C# Ldap Library, How can I get the current logged in User name 2) If I have a user name in the following format : User.Ou.Ou.O How can I convert that format into a DN and then find the user in the tree ? Thanks KaranMahant KaranMahant's P
-
Deleting entry from internal table
Hi Experts, i have the following internal table: data : it_result1 TYPE crmt_object_guid_tab and work area data : wa_result1 type crmt_object_guid. i have to delete a guid from internal table based on some condition. loop at it_resul1
-
RE: HP Pavillion DV2000 (RE277EA#ABN) I have recently replaced the motherboard and reloaded the original Vista Home Edition OS sucessfully. During this process I was prompted to select a restore point and noticed that a Windows XP OS version was an o
-
Everytime I restart my iPad2 it cannot connect to my home Internet
Help me