I am looking for following report

Dear Expert ,
                       I am looking for following report , please let me know the T codes for follo reports :
a) Assembly Log book Entry
b) Assembly Log book approval
c) Machine log book entry
d) Machine Log book approval
e) Monthly attendance
f) Monthly progress
g) Monthly opening balance Entry
h) Recalculation of Index
Reports
b) Daily log book Report
c) Incentive Details
d) Incentive Summary
Points will be rewarded .
Neal
Edited by: Neal Gibson on Oct 23, 2008 11:53 AM

Thanks for your reply . I know SAP1 and SAP2 but I am not HR guy . I just wanted to know th T codes from where I can get those reports .

Similar Messages

  • Looking for a report in LCM(Landed Cost Management)

    Dear All,
    We are looking for a report in LCM module to print all the unmatched/ partially matched receipt numbers with outstanding balance in accural account.
    Does any one have idea on this? or worked on similar reports before?.
    Detailed requirement:
    There are PO order receipts for which certain costs are estimated viz. Customs Duty, Clearance Chgs. Etc.
    Once the receipt is made, the inventory is valued based on the estimates. Subsequently when the actual invoice for the costs i.e. Customs Duty, Clearance Chg. are booked, there could be a variance. This difference in the estimated and actuals gets transferred to inventory provided stock exists.
    However if stocks does not exist then the revaluation does not happen. In such cases we need to monitor such balances.

    Hi Melvin,
    You can use the User Data Dump tool.  Check out the following post:  https://supportforums.cisco.com/message/3403809#3403809
    HTH,
    Chris

  • Looking for a report as below

    Greeting,
    newbie in VMWare Chargeback, try coouple times, still can not get what I am looking for I am looking for a report for vCloud Director that just include the following information:
    1. Information for ASSIGNED number of vCPUs to VM.
    2. Information for ASSIGNED Memory to VM.
    3. Information for hours for vm ON vs OFF hours
    4. Information for ASSIGNED Storage to VM
    5. Information for USED storage to VM.
    What I got is 3 of this 5 items are 0
    Anyone please give me some hints or direction how to to do that
    Thanks
    newbie

    Dear All,
    Good Day,
    I have two tables Table_1 and Table_2 in MS Accesss with following structure
    Table_1
    Attendance_Date     Name      Time_In
    12-Dec-2014            Smith        7:30
    12-Dec-2014            Mark          8:00
    12-Dec-2014            Rani          7:45
    13-Dec-2014            Smith        8:30
    13-Dec-2014            Mark          7:00
    Table_2
    Attendance_Date     Name      Time_OUT
    12-Dec-2014            Smith        5:30
    12-Dec-2014            Mark          5:00
    13-Dec-2014            Smith        7:30
    I am looking for a report as shown below
    Attendance_Date     Name      Time_In      Time_Out
    12-Dec-2014            Smith        7:30         5:30
    12-Dec-2014            Mark          8:00        5:00
    12-Dec-2014            Rani          7:45           -
    13-Dec-2014            Smith        8:30         7:30
    13-Dec-2014            Mark          7:00         -
    13-Dec-2014            Rani          -                -
    Anyone's help, really appreciate
    Regards
    Abdussalam

  • Looking for a report to get all managed system components

    Hi,
    We are looking for a report to get the support pack level of managed system.
    We can get that by going individually on each system entry in SMSY. Is there a standard report or a transaction in solution managed that can list the support pack level of all managed systems ?
    Thansk you for your help.
    Chak

    Hi,
    Another option you have -- provided that you are running EarlyWatch Reports on all of your systems -- would be to create a single Service Level Report.
    You would create a variant that includes all of your systems under the Select for Reporting column. Then under the Content from Solution Manager tab select the System Configuration -->  Select for Reporting box.
    This System Configuration report will provide you will the hardware info (OS version, CPU, memory), database version, SAP software components/version, and the SAP kernel.
    The SLR allows you to extract and aggregate segments of your EWAs into a single report.
    Good luck.
    Bill

  • Looking for Crystal Reports for . net framework 2.0 (x86) in MSI Format..

    Looking for Crystal Reports for . net framework 2.0 (x86) in MSI Format..

    Wasn't sure which version you are using, so here are the two i think you might be using:
    [CR for VS2005|https://smpdl.sap-ag.de/~sapidp/012002523100010010692008E/crredist2005_sp1_x86.zip]
    [CR for VS2008|https://smpdl.sap-ag.de/~sapidp/012002523100006255282008E/CRRedist2008_x86.zip]

  • I am looking for Crystal reports arleady designed.

    I am looking for Crystal reports already designed.  Does anyone know where I could fine them?

    Navin,
    Thanks for the reply, I have another question you might be able to answer.
    I have a picture field (blob field) on the same line as our Product ID field (regular data field) and i want the report to show the picture that goes with that Product ID. 50% of our products dont have pictures, so when I print the report, it currently prints large empty spaces for the Products that dont have pictures and makes the report quite long and unattractive.
    I have tried to supress the field and also put the field in its own section and use a formula for supressing if the data is blank, but I get the error message that says "Can not use a BLOB field in a formula".
    I need to find a way around this. Can you, or any of your experts help?
    I could send you the report with some data in it if that would help.
    Thanks again!
    JM

  • Looking for 2 reports

    I am looking for 2 reports:
    1. A report to tie the AA subledger to the General Ledger. In our company, we have several scenarios in which we post retirements/acquisitions with value dates in the past months and post it in the current period (which is open). This causes the balance on the subledger to change as of that value date, which is fine. However I cannot find a standard report to tie the balance to the sub-ledger. The report date on the standard report seems to pick up transactions in the subledger even if they have a future posting date. e.g. Report date 3/31 would pick up transactions that were posted with a value date of 3/15 but a posting date of 8/31. I need a report where I can pull balances by the Posting Date. The auditors need this to ensure that the sub-ledger and G/L are in sync. I am sure this is not an exceptional requirement. Can any one tell me how they handle this?
    2. I need a depreciation comparison report where I can compare depreciations of each period in a year side by side. Something that would have all the 12 periods and the total depreciation for say an asset class.
    Thanks

    Thanks for the response once again. I already know about ABST2 but the auditors want detailed reports. ABST2 just gives you the differences. Now as for the Asset Balances and the FS10N, thats where the whole issue starts. The auditors come in every 4 months and they look at the sub-ledger and G/L for those months to try and tie it out. Here the reason why we have an issue.
    Example: Say the FA balance was 1000000 as of 3/31 and it tied to the G/L as of 3/31. On 9/15 I post an entry to acquire an asset for 30000 with a value date of 3/20. The result is that if you run the asset balances report as of 3/31, it would show a balance of 1030000 and also an increase in the planned accum. However if you run the FS10N and look at the cumulative balance at the end of March, it would be still 1000000 since the 30000 was posted to the G/L in september and not march. When the auditors look at these 2 reports, they think that sub-ledger and G/L does not reconcile. I tried to explain the reason and they understood. However, they need a report to see it.

  • Looking for Simple report

    Hi All
    Hope u are doing well
    I was looking a simple report which gives me celar picture of the stages
    Sales oder no, Invoice numberNo, if on production production ordernumber due date of production order and po invoived to get the production done and trceiving date of POs for the same
    Kindly revert with the best possible option
    Have a nice day
    Kind regards,

    Dear Mona,
    The requirement you have putted on your report is very much complex.As per your scenario this one is only possible when you guys are following the base document otherwise this report is not possible
    Regards,
    Kumar

  • I am looking for few reports

    I am looking for Transaction Codes or Path to get these reports
    1 List of customer returns
    2 List of goods receipts
    3 List of Post Goods Issues
    4 List of goods shipped
    5 List of adjustment made to inventory by date/person. (Document it)
    6 Inventory aging report
    Thank you very much for help in advance

    Hi Ashish,
    MC+A                SIS: Customer Returns, Selection
    VL01N               Customer Returns
    VL02N               Customer Returns
    VL03N               Customer Returns
    MCP6                Goods Receipts
    MB1A                Goods issue
    MIGO_GI             Goods Issue (MIGO)
    COWBHUWA            Goods Issue for Work Order
    MB90                Goods Issue Messages
    VLLA                Picking/Goods Issue
    VL06G               Goods Issue - Delivery
    COGI                Goods Issues
    VLLA                RWE: Picking/Goods Issue Analysis
    VL06G               Deliveries for Goods Issue
    VL23                Goods Issue (Background)
    Small Suggestion, use the tcode search_sap_menu to look for any tcode or report!
    Hope it helps,
    Thanks
    Janani
    award points if helpful

  • Looking for few reports

    I am looking for Transaction Codes or Path to get these reports
    1 List of customer returns
    2 List of goods receipts
    3 List of Post Goods Issues
    4 List of goods shipped
    5 List of adjustment made to inventory by date/person. (Document it)
    6 Inventory aging report
    Thank you very much for help in advance

    Hello Ashish,
    His all are transactions identified by mvt type so you can use MB51 to get the information or alternatively you can use MSEG table.
    Inventory aging report : you can explore MC.9 here you will get last mvt date, last GR date, Last GI date so it's upto business how you want to consider it for AGING.
    Also, you can use transaction code SAP1 to get all report menu, please explore your area to find the relevent report.
    Regards
    Arif Mansuri

  • Suggest a good book and I am looking for following books? please help

    Dear all,
    I am looking for some help that if anybody can tell me some good book in which I can get complete information about how to go for a project from beginning to end.
    Specially I am looking for complete details about user roles and responsibilities in oracle forms that how can we build log-in screens and attaching all those securities to menu.
    Thanks and Regards
    Maz
    Edited by: 853604 on Sep 9, 2011 12:06 AM

    Hi
    get complete information about how to go for a project from beginning to end.as a Start here is a link for Oracle Tutorials...
    http://www.holowczak.com/
    and the iSelfSchooling
    http://www.iselfschooling.com/Free_Oracle_Training/02_Developers/01_Forms/lesson01.html
    For complete project pls search in this site
    http://www.araboug.org/
    it has an attendance , and other complete projects good users gave it to beginners and other developpers as a gift for learning, all u have to do is making such effort to search and translate to English.
    Hope this helps...
    Regards,
    Amatu Allah.

  • Query for following report

    Dear All,
             My A/P Invoice entry is as Follows.
            A/P Invoice
            1) Item code (Multiple Items Possible)
            2) Quantity per item
            3) Unit Price per item
            4) Under frieght I entry 3 freight value
            5) Tax Code is selected
            The report required is
            1) A/P Invoice No
            2) A/P Post Date
            3) A/P Documnet date
            4) A/P Vendor Code
            5) A/P Vendor Name
            6) Vendor state ( From Vendor Master date Address)
            7) Vendor Cst no / Vat no / Tin No ( These all are UDF)
            8) A/P Doc total before Discount ( This does not contain frieght value) ( I am able to obtain this from the OPCH-- Max 1099 Amount Field)
            9) A/P Doc total After discount
            10) A/P Feieght Break up.
            11) A/P DOc total + Excise details
            12) A/P Tax Code
            13) A/P Tax Amount
            14) A/P Final Total Value
            The main issue is till point number (8) I can get the query after that the query goes wrong.
            I need a similar query for A/R Invoice also.
            Please advice.

    hi aslam,
    Try this query,
    SELECT T0.DocNum as 'AP Invoice No.',
    T0.DocDate as 'Posting Date',
    T0.TaxDate as 'Doc. Date',
    T0.CardCode as 'Vendor Code',
    T0.CardName as 'Vendor Name',
    T1.State1,
    T2.TaxId1 as 'CST No.',
    T2.TaxId11 as 'TIN No.',
    T0.Max1099, T0.DocTotal,
    T0.TotalExpns,
    T0.VatSum
    FROM [dbo].[OPCH]  T0 INNER JOIN [dbo].[OCRD]  T1 ON T0.CardCode = T1.CardCode
    INNER JOIN [dbo].[PCH12]  T2 ON T0.DocEntry = T2.DocEntry
    WHERE T0.DocDate >= '[%0]' and T0.DocDate <= '[%1]'
    Whether it solves ur requirement ?
    Jeyakanthan

  • Looking for a report to force the option "after aggregation"...

    Hi guys!
    I read everywhere that the option "before aggregation" isn't available under BI7.0. I wonder if there's a way to force "aggregation after" for all my objects. Like a report, a function...or do I have to set the option on every object in the Bex query designer?
    Does this kind of thing exist on BI7.0?
    Best regards,
    Julien DERIOT

    Hi,
    You have to set option on Every Object.
    Assign points if it helps.
    Regards,
    sandeep

  • Looking for a report on user mailbox size in Unity Connection 8.5.1

    Cannot find a report that shows mail box size so that we can identify users approaching limit.
    The canned  reports don't have mailbox size.  Thanks in advance.  Mel

    Hi Melvin,
    You can use the User Data Dump tool.  Check out the following post:  https://supportforums.cisco.com/message/3403809#3403809
    HTH,
    Chris

  • Looking for Crystal Reports Server XI R2 SP4 on Windows

    The file on the SAP/BusinessObjects downloads fails with an error. Where else can I get this service pack?
    Also is this the latest service pack available for CRS XI R2 on Windows?
    Regards
    Lawrence

    Bala:
    Please post the url to the download site.
    Business Objects downloads only has SP4 and SP2 for Linux
    Thanks
    Lawrence

Maybe you are looking for

  • Problems with MSI K7N2 DELTA ILSR

    I set my bios to high performance defaults and now when i turn it on the diagnosis LED's say that the processor, then the RAM are damaged, but this isnt the case as i have tested them in a different machine and they are ok. I have tried clearing the

  • How to read URL Parameters in ABAP WebDynpro ?

    Hi, How and where (which class, method) in ABAP WebDynpro we can read URL Parameters ? I found answers for WebDynpro JAVA but nothing for ABAP. Thanks Meenal

  • Problem with slideshows

    I can't view my albums as slide shows. When I click on the slide show button nothing happens. I've never had this problem before. Why is this happening?

  • Oracle UCM(Stellent) Certification

    Hi All, Where i can get the complete details about the Oracle UCM (Stellent) certification. Regards, mouli

  • How to set LAST used values as default

    Hi, To run my application,I usually want to set the most of the parameter values same as used in last experiment. I do not want to set the default values manually as I had to use three codes and there would be 20+ controls in all these. (Sorry Evan,