I am LR5 user purchased not long after release (MAC Mavericks OS 10.9.5). This is the 3rd time that after successfully closing (no errors or anything unusual) that Lightroom opens to the intro screen as if its a new install, losing all my settings
Why is this happening and how do I get them back? Quite frustrating
Try using File->Open Recent and see if any of the other catalogs shown there are the one you want
Similar Messages
-
can someone please help me i need to know?!
Tylegn wrote:
The only other thing you can do if you cannot contact the previous owner, is contact Apple and submit your original proof of purchase. By original proof, it means from when the device was first purchased brand new in the box etc... It won't count if it's from a pawnshop or second hand.
Good luck to you!
How on Earth would doing all that help, when the original proof of purchase would have to come from the previous owner who the OP cannot get a hold of?
Bad advice. -
im going to go to apple to show my phone that my wi-fi wasnt working and now iv droped my phone and the hole screen came out, its not smashed it just came out, butstill works, so now im worried apple my wont take care of it, what will they do ?? it was a bran new phone
You are correct to worry. There is no way for Apple to know if the wifi problem was before or after the drop. If you have Apple Care +, you can get a replacement device for a deductible. If not, user damage is not covered under the warranty or regular Apple Care. You would need to see if they will repair the screen (at your cost), or if you would have to purchase an out of warranty replacement.
-
is there another way i could turn my phone on? it wont turn on or show me the battery screen to show its charging. i already tried to hold the on and home button at the same time but it does not want to turn on. please help?
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591 -
I have started my computer in safe mode as recommended but not long after the grey Apple icon appears with the spinning gear it automatically shuts down! any suggestions?
Try these options:
Credit Kappy.
This support article addresses a 'blue scree';
http://support.apple.com/kb/PH7212
Ciao. -
updated my mac to mountain lion 10.7.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install saying that I need to see developer. Whenever I try to open my appstore, mail or facetime it says that the programmes need to be installed and might not be compatible with this version of mac operating system. Can anyone help me?
It's not a bad install of Mountain Lion. I've had the same thing happen to me, but it affected not only Mail, but a variety of other programs including iPhoto and MS Office, where I had to delete preferences, caches, and reinstall the OS as well as the program itself. I'm still having issues with Mail, so I've gone to another program.
Everything was fine upon the initial install. I restarted my iMac about two weeks after the install, and that's when the issues began to happen. I've reinstalled Mountain Lion twice, but the same issues arise.
As I mentioned above, you'll need to figure out which preferences are causing the issue, then reinstall the program, as a fresh reinstallation will do you no good unless you wipe the drive completely.
Here's a thread that helped me with iPhoto:
https://discussions.apple.com/thread/4794375?start=0&tstart=0 -
The touch screen on my nearly brand new Pavillion lap top running windows 8 no longer works.
The touch screen on my nearly brand new Pavillion lap top running windows 8 no longer works. Cant use calibration tools as there's no response to touch. No option in control panal to turn on or off touch capability. I have no computer background so cant really get to technical. Is something simple turned on or off located in some mysterious place? F key or something? Bad machine? Thanks for any input. Sarah
http://www8.hp.com/au/en/drivers.html
I found the driver at the above link. I installed the driver, disabled my graphics card and rebooted. The touchscreen worked. Then I enabled the graphics card. So far so good. Hope I dont have to do this routine too often.
Good luck with it. -
I had itunes working properly for a long time till one day, it was configuring to open the program then i get a message out of nowhere that says could not acess network location %APPDATA%\ i cant even uninstall without this, whats the big deal?!
With that particular variety of 1606 (it's a 1606 error message even though the 1606 error message number isn't returned by the iTunes installer), the following Microsoft document is worth a try:
You receive an "Error 1606" error message when you try to install or remove a Microsoft program -
I have a new iPad with anO2 mico sim when I purchase O2`s 200mb daily data allowance I lose 50 mb right of the bat . O2 say its the iPad doing it , is there any way to see what is happening?
Can't help you except to point you to the following topic which seems to be directly related to your issue. Be aware that it's quite a long topic to read through...
https://discussions.apple.com/thread/3029461?start=0&tstart=0 -
How will i remove this safari volume like icon that is shown in my lock screen?this recently showed up days ago..after i upadated with ios7
Thank you for the reply. I wanted to wait awhile in order to ensure that this corrected the issue. For a brief while, it did! However, it did not take long before the screen began once again hijacking my home button presses. This occurs even with Firefox removed from default applications ( triple-checked ).
This never happened before version 35. -
hi my iphone was fully charged and turned its self off, i have tried to turn it back on and reset it, but no luck so i have plugged it in to my pc and it displays the apple logo and then goes back off i have tried this a number of times with no success anyone got any idears?
Try here:
iOS: Not responding or does not turn on -
JDBC + MySQL : "Operation Not Allowed After ResultSet Closed"
I have a very short piece of code. I use one connection to the database. I execute a query, get back a lot of rows, then iterate through the result set and for each row I get some information and then perform an insert into a different table.
The problem is that the big result set I am iterating through keeps closing sometime during the first iteration. Why? I am using three different statements:
1) Statement 1 is for the main query I want to iterate through
2) Statement 2 is for a quick lookup I perform (on a different table) for each item in the iteration.
3) Statement 3 is for the Insert statement which I perform for each item in the iteration. Again, I insert into a different table and I use "executeUpdate"
Given the I have three different statements and I am working with three different tables, why does my main result set that I am iterating through keep closing on me?
Here is the error I am getting:
java.sql.SQLException: Operation not allowed after ResultSet closed
at com.mysql.jdbc.ResultSet.checkClosed(ResultSet.java:3603)
at com.mysql.jdbc.ResultSet.next(ResultSet.java:2468)
at com.mysql.jdbc.UpdatableResultSet.next(UpdatableResultSet.java:565)
Thanks for your help.I have a very short piece of code. I use one
connection to the database. I execute a query, get
back a lot of rows, then iterate through the result
set and for each row I get some information and then
perform an insert into a different table.Sounds like a classic case of making Java do what the database was made to do.
I'd bet you can do this in a single INSERT with a SELECT in the database in one network roundtrip. The "quick lookup" might be a JOIN or a sub-SELECT. When you do a query, bring N rows back to the middle tier, then do an INSERT for each row that you retrieve it means (N+1) network roundtrips if you don't batch your INSERTs. I'd have a SQL expert give your code a look.
The problem is that the big result set I am iterating
through keeps closing sometime during the first
iteration. Why? I am using three different
statements:
1) Statement 1 is for the main query I want to
iterate through
2) Statement 2 is for a quick lookup I perform (on a
different table) for each item in the iteration.
3) Statement 3 is for the Insert statement which I
perform for each item in the iteration. Again, I
insert into a different table and I use
"executeUpdate"
Given the I have three different statements and I am
working with three different tables, why does my main
result set that I am iterating through keep closing
on me?Maybe your ResultSet or Statement goes out of scope. Do the Statements share a Connection?
% -
CRT results are not appearing after successful payroll run
CRT results are not appearing after successful run of US payroll, however, RT results are appearing.
Please suggest ideas to find the results of CRT.Hi Rémi Corriveau,
Thank you for spending your time to answer my question.
Here are the answers to your questions . . . .
QUESTION: Did you run a Payroll Simulation or a live Payroll Calculation ?
ANSWER: We did a LIVE payroll run for a period of 3 months.
QUESTION: Did you use t-code pc_payresults ?
ANSWER: Yes, we used the t-code pc_payresults but still it doesn't show the CRT results.
QUESTION: Did you check Processing Class 30 and 70 for your WTs ?
ANSWER: As per the process, we copied the SAP standard (model) Wage Type M010 to
our customized Wage Type, hence, hope that it wouldn't disturb any of the standard SAP settings.
However, we did check the Processing Class 30, but did not check the processing class 70.
Shall update you once PC 70 is also checked.
Please educate, if there are any particular specifications that need to be entered while checking
for our WTs in PC 30 & PC 70. -
This is the "Help" AT&T gives its customers... Loyal at that!!! Read below
So this is the "help" AT&T gives its customers after waiting a week... back to square 1! Read Below
Hello Rafael,
Thanks for your e-mail to AT&T. This email address has been discontinued. For questions about your AT&T service, please use one of the following:
Tweet us @ATTCares or send us a direct message.
Post on our Facebook wall at www.facebook.com/uverse or send us a private message.
Use the AT&T Chat option on http://www.att.com/ to connect with one of our live representatives.
Call Customer Service at 800-288-2020.
ref:_*****_ref
[Edited to comply with Guidelines]The ATT Customer Care is who sent me that email! You email them then
Becca G via z778ai2dmnet9w35.a008.e-czfkmai.na9.bnc.salesforce.com 8:16 AM (42 minutes ago) to me Emails you then after a few days their email is discontinued!!! Just Lies after Lies! Just like whoever is replying to me LOL. You all are a JOKE! -
My Desktop Mac won't startup, it turns on to the grey screen flashing question file. I have been able to startup from the snow leopard install cd but once I try to repair within DU the disk never appears in the side panel. The only thing there is "Media"... What can I do? Help!
If Disk Utility cannot see your drive it doesn't look good.
You could try DiskWarrior. It is expensive but can often fix directory structures where DU cannot.
Replacing the drive is also a strong likelihood. If you don't have a fairly recent backup, then it might be worth buying DiskWarrior
additonal notes;
Gray screen appears during startup
Maybe you are looking for
-
Hi all, Good morning all PROCESS BEFORE OUTPUT. module no_lines.------1 MODULE STATUS_9100. loop at itab with control table_control cursor table_control-current_line. module get_data.---- 2 endloop. 1)data li_lines type i. describe
-
Problem with Applying Naming Standards to Keys and Constraints
Hi I have an issue, and not sure where to go. I have 3 relational models in 1 design. I set up my foreign key template. I applied it to the first relational model, and it worked like a charm. When I bring up the "Apply Naming Standards" window for th
-
F4 Help in Variable Screen during Query Execution
Hi All, We are executing queries through WAD. The F4 help in the variable screen during query execution is taking a lot of time. SAP note 661251 suggests changing the F4 mode to M. We need to change the booked value parameter. I looked into the stand
-
Hello All, My requirement is while saving Purchase Order, if an IDOC is posted with status 03, then i have to update few tables. But i could not find a place where can i write my logic so that the status is for the current IDOC is available. Thank yo
-
Substitution rule for FICO reconciliation
HI we have activated FICO reconciliation. During cost centre distribution cycle, we want to post the entries into seprate GL. To meet this requirement we have written substitution rule s follows:- Pre-requisit - if GL code is XXXXXX and cost element